I connect my ipod then it ejects automatically?

I have a 3rd generation ipod nano and have had it for a couple of years now. Recently when i plug it into the usb and onto my computer (which is windows xp) it comes up on the screen as conneted then about 2 seconds later it says ejecting and ok to disconnect. It doesnt come up on itunes that it is connected either. Before it started doing this my ipod was set in manual sync mode. I have also changed the cable and it still doesn't connect. I have connected another 4th generation ipod nano and this connects to itunes fine, does anyone have any idea what could be wrong with it or shall i just invest in a new ipod?

Finally able to solve this problem. It turned out to be a faulty USB port on my Dell. Actually all internal USB ports are weak. Discovered this morning when I connected my external hard drive to the PC and it would not power up in either front or rear USB. Tried removing all USB devices except mouse, still no good. Support for Seagate suggested low or insufficient power based on symptoms on the drive. Purchased Giga-Ware 4 port USB Hub (with external power)from RadioShack. Now the External drive, and both my third and fourth Gen Nano's work just fine.

Similar Messages

  • As soon as i connect my ipod classic it ejects itself

    please,how do i stop my ipod from ejecting itself?

    Hi,
    Apple support has fixed this issue for me as it seems to be a common issue with itunes 11.
    Go to top left of itunes and select "show menu bar" - this will then display "file, edit, view..." menu on top left.
    Go to view and select "show sidebar" and then connect your ipod.  This should now work for you.
    Apparently with the hidden sidebar the very first time you connect it has a hard time recognising it.  After you follow the above steps and connect the first time you will no longer have this issue and you can connect the ipod and keep the sidebar hidden in the future.
    Hope this helps.

  • When I connect my Ipod, itunes freezes up.

    As my subject states: I'll have itunes up and running, I use the USB plug to connect my ipod then itunes freezes. The Do not disconnect icon is flashing on the ipod but nothing happens on itunes.

    No.  Have you seen this article  yet?
    http://support.apple.com/kb/ts1717
    B-rock

  • My ipod 1st gen battery went totally dead because the usb cable was defective. I've changed the cable.  now when i connect my ipod to the netbook, itune is not launching automatically and windows does not recognize it......how can these issues be resolved

    My ipod 32gb 1st generation battery went totally dead because the usb cable was defective.  I have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it.  Nonetheless it is charging.  However can i resolve these issues bearing in mind that i am not tech savvy?

    have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it. 
    Try disabling a/v software and turn off the Firewall on your PC.
    Disable antivirus software
    Turn-Windows-Firewall-on-or-off
    Then connect the iPod to your computer. Launch iTunes. If your computer still won't recognize the iPod check out this article.
    http://support.apple.com/kb/TS1538
    Once your iPod is functioning again, with it connected to your computer, launch iTunes. Select the iPod under Devices in the source list on the left.
    Select the box next to:   Open iTunes when this iPhone is connected
    That way iTunes should open automatically when you connect your iPod to your computer.
    And iTunes / Preferences - Devices. You can have your iPod sync automatically whenever it's connected from the Devices pane.

  • When I connect my ipod touch to itunes, itunes automatically downloads all of my old apps onto my ipod. how do I stop it?

    when i connect my ipod to itunes it starts a sync and then a backup. then at step 5 of 5 of the backup itunes starts to download all of my old apps to my ipod and then i have to cancel the sync and then on my ipod all of my old apps are grayed out and i cant even delete them. this happens every time i plug my ipod in. how do i turn this automatic download setting off?

    Was any error message given? They usually are.
    Try resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • Ipod will not stay connected for more then a few seconds

    I was going to update my nano this morning after downloading the newest version of software, and first off it said the firmware was corrupt. so then I restored it, and it would not restore to the new version so i used the older version. the ipod seems to work in my hand but when i connect it to my computer it will not stay connected for more then a few seconds, then it ejects its self, but itunes still shows it as being there even though the rest of the computer does not
    I have not had any issues with it since i bought it which was last june.
    any ideas?
    John

    Hi John,
    I would suggest, with your iPod disconnected, that you force your iPod into disk mode (following the instructions in this article)
    Connect your iPod to your computer.
    Then, try restoring it in iTunes while it is connected in disk mode.
    Can you successfully restore your iPod?
    If so, when the restoring and resyncing process is all complete, now update your iPod to the latest firmware.
    Any success with trying that?
    -Kylene

  • IPod  recognized by OSX but then immediately ejected.

    Plugging in the IPod Nano (iMac - Leopard) causes it to appear on the desktop but then be automatically ejected. Nothing wrong with the iPod since it is recognized by my laptop (Tiger), also it appears to work fine in normal use. If I un-install iTunes then the iPod Nano appears to remain mounted.
    I suspect something is wrong with the iPod driver/interface. I am also having problems with iTunes, which doesn't display the start-up window and doesn't respond to most menu selections. Currently using Songbird, which works fine except that the iPod is still mounted and then immediately ejected.
    Any help would be much appreciated.

    When the Nano is ejected does it disappear from the sidebar in iTunes as well?
    In the summary tab for the Nano is "disk use enabled"?

  • When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

    When I connect my ipod to my computer it opens my documents and won't show up in my itunes and I have unistalled then reinstalled itunes and reset my ipod twice and it stills does the same thing how can I make it so that it shows up in my itunes?

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • HT2688 Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function.  Can you then connect an iPod touch and copy music from a shared librar

    Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function.  Can you then connect an iPod touch and copy music from a shared library?

    Was your wife logged into the libray at the time you tried to log in? I have had a similar problem and it was because another user was logged into the library when I attempted to. I got the permission denied banner.

  • When I connect my iPod to the computer, it connects for only about 5 seconds and then disconnects on its own before synching. How do I fix this?

    I had my iTunes and library on my home computer.  The computer crapped out along with the hard drive.  I have my library on my iPod and want to put it on my new computer, but any time I connect the iPod to my home computer (and work computer for that matter), it only connects for about 5 seconds and then disconnects on its own.  I go to look at the iPod as a hard drive and I have nothing but empty folders (contacts, calendar, recordings and something else), but nothing is in them.
    1) How do I get my iPod to connect to my computer?
    2) How do I get my iPod to connect to iTunes?
    3) Why don't my music files on my iPod show up on my computer?
    I have uninstalled iTunes and reinstalled iTunes.  I have done the "trick" of hitting the 'Menu and Center' buttons at the same time unitl the Apple icon appears.  I have tried going into Disk Mode.  I don't know what to do now.  The word "Resetting" scares me because this is where I have my 150 GB of music stored and I'd rather not have to upload my CD's again.............will resetting affect that?  The word "Restore" is even scarier!!!
    Help!

    i am using a cable connector like this one.. it works with audio when pluged into a stereo but not a TV.i am trying to display video from ipod, also from other apps.. i also want to know why it does not work.
    i use the video app on the iPod and video stored on other aps.

  • When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?

    When I connect my iPod touch it tells me that I need a new version of Apple Mobile Device Support and to uninstall iTunes and then re-install it, I've done that twice with the newest version of iTunes and it still doesn't work?

    Try:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Everytime I connect my iPod to USB, iTunes says the following: This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes.

    I have the latest 64-bit version of iTunes on Windows 7 Ultimate.  Everything was fine until recently.  Now when I connect my iPod Touch to the USB to sync with iTunes, I get the following message:  "This iPod cannot be used because the required software is not installed.  Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes"  I have removed, repaired, and installed the 64-bit version numerous times as well as disabled all antivirus / adware utilities.  Same message appears when I plug in my iPod.  Any help would be greatly appreciated.

    Did you try removing and reinstalling all the Apple software using these instructions:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes.  Any ideas?

    I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes.  Any ideas?  I am on Windows 8.1 and my iPod is a Classic

    Hi murr18140,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363?viewlocale=en_US
    I hope this information helps ....
    - Judy

  • HT1414 how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then re

    how can i open my iphone because when i try to restore it from my back up all the files it didn't open anymore & always my iphone have a problem that it automatically shut down then the itunes logo appear then i need it to connect to itunes then restore to enable to open it..what should i do?i cannot bring it to the smart center because i lost my receipt..is there any chance to recover it?thank you so much..i already update my operating system to ios 6.1.3 but when i recover my  back up the operating system was ios 6.1.2..

    Your phone is in recovery mode. Did you plug it to the computer running itunes? What happend?

  • Hi recently my MacBook pro has stopped connecting to our office Synology server automatically.  I now have to Go Connect to Server etc in order to browse the file server. Clearing key chain and then readding everything hasnt made any difference. HELP

    Hi recently my MacBook pro has stopped connecting to our office Synology server automatically.  I now have to Go > Connect to Server > etc in order to browse the file server. Clearing key chain and then readding everything hasnt made any difference. HELP

    Not sure what other tests they could run for me. I've pretty much run all the tests I can using Drive Genius and Tech Tool Pro 5. Is there anything they use that I don't know about??

Maybe you are looking for

  • Issue with macro

    I have a macro that updates a key figure . The macro checks certain conditions and if the result is true sets the value of the key figure to 1 and changes the key figure value to 0  if the conditions return a value of false. I executed the macro in a

  • How Function module MD_SET_ACTION_PLAF works?

    Hi all I created z4 action control  with (  /Sche/ZZZ1/ZZZ3) Actions and put it in MRP view in material master.When I run function module  MD_SET_ACTION_PLAF  for mass change of given planned order and put actions in above mentioned order( in TMDACCT

  • Is anybody happy with the sidebar in Safari?

    Safari now has a side bar that LOOKS JUST LIKE THE MAIL SIDEBAR.    I find myself pausing to figure out whether I'm in Safari or in Mail.  This makes me very unhappy.

  • HTML messages with SMTPClient

    I'm trying to send HTML messages using the older SMTPClient class that comes with the earlier JDK's. I use an older version of CodeWarrior to write my code and it has problems with the new SDK. So I haven't downloaded the JavaMail API yet, it looks t

  • Can't reset my Apple ID security questions

    Hi, I can't reset my security questions.  I no longer have access to the rescue email address that I used years ago when setting up my account.  I have no Apple device, so I can't verify my account that way.  I haven't purchased a single thing on my