I connect on the wi-fi network but i can't connect in internet

i connect on the wi-fi network but i can't connect in internet

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

HT4437 I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

Welcome to the Apple Community Willy.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

My ISP requires a http login. I can use the iPad fine if I am logged in on a PC connected to the same wifi network, but if I login on safari on my ipad, the connection drops after some time.. any workaround?

My ISP requires a http login. I can use the iPad fine if I am logged in on a PC connected to the same wifi network, but if I login on safari on my ipad, the connection drops after some time.. any workaround?

TJBUSMC1973 wrote:
The iPhone is working, as designed and advertised. In this case, the user failed to educate themselves properly, either by proper research or asking the right questions, before purchasing the device.
I understand that the OP failed to do research. But then, I wasn't replying to the OP. I was replying to Chris. I have Verizon. I can talk and use data at the same time with my Droid Maxx. Therefore, the problem is not just with the network. It would be technically possible for an iPhone to do that on Verizon/Sprint if Apple had chosen to use a different chip, such as the kind other phone manufacturers have elected to use.
Of course, this is probably all irrelevant to the OP's issue. It was merely a point of clarification, especially for those people who are used to being able to use both voice and data at the same time on Verizon. When they switch to an iPhone, they are often surprized at the limitation.
Best of luck.

HT4356 I am trying to connect my printer, canon MG3170, it has been connected to the same WIFI network, but I still showing "no airprint printers found". I have tried to restart the printer few times but still the same. Please help, thanks (Dhoni-Singapor

I am trying to connect my printer, canon MG3170, it has been connected to the same WIFI network, but I still showing "no airprint printers found". I have tried to restart the printer few times but still the same. Please help, thanks (Dhoni-Singapore)

power everything off printer & router.
re-boot ipad.
Press and hold the Sleep/Wake
button until a red slider appears, then drag the slider. Then press and hold the Sleep/Wake
button until the Apple logo appears. page 128 iPad user manual.
more details on re-booting:
http://ipad.about.com/od/iPad_Guide/ss/How-To-Reboot-Your-iPad-Power-Off.htm
power on router then printer then ipad
Cross your fingers.
Robert

Mac Pro 10.6.4 - I can SEE the Windows network, but I can't connect!

So I have a brand new Mac Pro dual 6-core machine in the design department of our company, and it's sweet. However, this is one of two Macs on an all-Windows network, and we're newly having some trouble.
Until recently, I could (on our iMac running 10.6) see and connect to our network with no trouble, sign in to my personal folder, etc. Now, however, the IT guys just updated the servers (and I don't know the configuration, or even what specs are critical to know), and while I can still SEE all the network drives, I can't connect to them, no matter what I try. I've tried different workgroups (which show up in my WINS Network preferences), I've tried adding search domains, I've tried using Connect To Server... with smb:// addresses and also browsing through the drives and connecting that way... I'm always told either that there was an error connecting, the server/share doesn't exist, that my login credentials are wrong, etc.
I know that I am using my proper username and login for the servers, I know that the names of the shares I'm trying to access are correct... but something is amiss here and I have no idea what it is. Is there something that needs to be done on the network side of things that I don't know about? (I'm sure more info about the network setup would help in this regard). Is there anyone who is dealing with this same issue?
Please help me with the benefit of your experience and knowledge... we need to get our Macs up and running... or we'll be stuck on Windows machines forever!
Thanks in advance,
Matt

mh, that's really hard to solve because it's probably something the IT guys did with the network.
only a few hints:
if connecting via "connect to server", try to use IPs and not computer names, so smb://xxx.xxx.xxx.xxx instead of smb://server1. also, don't add the name of the share directly to the adress. just type the IP and you will see all available shares.
secondly, mac OS seems unable to connect if the user on the other computer does not have a password. I suppose your users do have passwords, but just to be safe.
other than that I can only imagine it being a problem on the windows side, blocking the mac or something. macs don't always see PCs in their network automatically, but the "connect to server" approach never failed on me. of course I'm only in a small home network

Connected to the Airport Express' Network but Can't Find Express

I've recently been having some trouble with my network, which contains a modem connected to an Airport Express, with my iMac connecting wirelessly to that. My internet connection is getting dropped, and when I open up Airport Utility I can't see my Express. However, from the wireless indicator at the top-right of my screen, I am still connected to the Express' network. When I turn my iMac's Airport on and off, it reconnects to the Express' network (which is constantly at full-strength). I also can't ping the Express.
So, I'm connecting to the Express' network but I can't do anything. After a variable amount of time (5 seconds to half-an-hour), the Express will appear in my Airport Utilities once again and I can surf the net. Does anyone have any thoughts? Is there a way to ping any of the protected wireless-networks that are available, just to see if it's a problem on my iMac's end? Could my Express still be broadcasting its SSID but has shut-down it's networking capability because of an overheating issue?
Thanks.
- Matt
PS. My Airport Express is the 802.11n model.

You may need to re set the AE to factory specs and start all over. Read the manual on a factory re set. Start on page 41 and go through page 42.

HT3867 I am connected to the hotel wifi network, but the login screen does not appear.

Hi,
I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
Is there a way to make the iPhone try to open the login page?
Ben.

I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
But, sometimes it works the first time or suddenly for no reason.
Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated.

I can connect to a network but I can't connect to internet...

Hi! I have a rarely problem:
When I try to connect to a wireless network I can and it shows that I have a high signal on the menu But I can't connect to the internet or it runs very slow... The macbook says that I'm connectet to the internet :S. I try to connect from windows XP with bootcamp at the same network and it runs very fast... What's the problem?? Thanks!
Sergi

Yes, this is possible ... but understand that you would need two switch wireless networks between network/Internet access and for printing.
The AirPort would not get a Public IP address, but it would have a Private IP address of 10.0.1.1 ... and it would be providing wireless clients connected to it with Private IP addresses in the 10.0.1.2 - 10.0.1.200 range.
AirPort Utility > Select the AirPort > Manual Setup > AirPort > Wireless
Wireless Mode: Create a wireless network
Wireless Network Name: <enter a desired Network Name or SSID>
Radio Mode: <leave the default or select a desired radio mode>
Channel: Automatic
Wireless Security: <select the desired wireless security type>
Internet > Internet Connection
Connect Using: Ethernet
Connection Sharing: Distribute a range of IP addresses
Internet > TCP/IP
Configure IPv4: Manually
IP Address: 10.0.1.1
Subnet Mask: 255.255.255.0
Router Address: 10.0.1.1
DNS Server(s): <leave blank>
Domain Name: <leave blank>
Internet > DHCP
DHCP Beginning Address: <leave default or change to a desired starting address>
DHCP Ending Address: <leave default or change to a desired ending address>
Advanced > Logging & Statistics
Allow SNMP (unchecked)
The AirPort will still report at least three errors: 1) Configuration of WAN, 2) SNMP over WAN, and 3) Double NAT. These can all be safely ignored to stop the AirPort's status light from flashing amber in this configuration.

Connected to the Airport Express network, but cannot access internet

I am using Airport Express (n) to create a wireless network in my apartment. It is connected via ethernet to a Motorola cable modem. My Macbook and iphone are on the network and I am able to connect to the internet without issue. I have a new Samsung N120 (wireless b/g) which finds and connects to the wireless network (Signal Strenth=excellent)but I am unable to connect to the internet. My Airport settings are for n, b/g compatible. The N120 has had no trouble connecting to other wireless networks. Samsung and the Cable Company can offer no insight, hoping for the Apple experts to help me figure this one out. Thanks!

Welcome to the discussion area!
Once you have the wireless connection established from the Samsung, have you power cycled your complete network? If not, power down every device including the Samsung DVD player. Order is not important.
After a few minutes, start the modem first and let it run a few moments alone. Then power up the AirPort Express and let it run a few moments. Next, power up computers one at a time for a few minutes and check to make sure that you can establish internet connectivity. Finally, power up other devices one at a time and check for internet connectivity.
Not sure what else to suggest as your post indicates that the AirPort Express is functioning correctly.

I have 3,500 photos on my MacBook that I would like to copy to my Windows 7 PC. The PC CAN "see" the MacBook on the wi-fi network but I can't find the picture files through that route on the MacBook.

I took 3500 pictures with an iPhone 5 and a Canon Ixus camera whil on holiday in China. I downloaded them onto my MacBook every day.
Now we're back home I want to back them up onto my Windows 7 PC as it has a 1 TB HDD.
My PC and MacBook can see each other over the wi-fi network (the PC has an Ethernet connection to the wifi router) and the MacBook can copy files from the PC but not vice versa although the PC can "see" the MacBook - just not copy or transfer any files.
Also when I look for the jpegs for my holiday pics I can't find them on the MacBook though they open happily in iPhoto. When I look in my iPhoto library it seems to have (among other things) an XML file as a database but no actual jpegs. There are some jpegs on the MacBook but these are from photos I transferred from the PC before I out the 1TB HDD in.
Where are the actual photos stored and how can I transfer them to the PC over the wifi network?

Selectthem in iPhoto and export to a desktop folder - see the user tip on exporting for edtails on the options available - from there it has not involvement of iPhoto - what access you have andhow you access the Mac disk is a subject for a differnt forum
Direct access to the contents of the ihoto library - a SQLite database - is not supported
LN

After trying to set up access control, my Airport Utility is no longer able to find my Base Station. My PC still sees my wireless network but I can't connect to it.

A friend told me he was able to access my network from a different device with no password so I decided to set up an access control. Following the prompts, I entered my IP address, and then my Airport stopped working. I tried uninstalling it and reinstalling it, but got the same thing. The screen I get is that "Airport Utility was unable to find any Airport wireless devices", and askes me if I want to rescan. When I rescan I get the same message. My Airport light is green and my PC recognizes the network, my software just can't connect to it. A friend suggested I entered the wrong IP address (which I found on my computer under "connections", but even after I tried a different one which is supposed to be from the network, I still get the same error message. What am I doing wrong?

A friend told me he was able to access my network from a different device with no password so I decided to set up an access control.
This could be bullsh!t on your friend's part perhaps? Do you ever recall seeing a blue-light on the base station?
Following the prompts, I entered my IP address, and then my Airport stopped working.
The acces control list is where you put in your Mac Address, this is not the same thing as an IP.

I can see other Macs on network, but I can't connect via afp, smb or Bonjour

Hello.
I have a Mac Pro running 10.6.8, a Macbook Pro running Lion, an Ipad 2nd generation and an Iphone 4. All the devices "see" each other, but I am unable to establish a connection.
For instance: I can see the other mac in the finder, but a connection can't be made neither via clicking or using command + K
I can see my iTunes libraries in the remote app, but it wont connect to the iTunes library. Same with iChat: in the Bonjour network both macs see each other, but no message is delivered.
However, I can connect to the harddrive, that is connected to my airport extreme. Previously I thought my router was the problem, but now I exchanged it with this airport Extreme.
In another thread I read something about adding 10.0.1.* to "Bypass proxy settings for these Hosts and Domains" in the network proxy settings, but this did not help. Although I am not sure if I entered it right.
Any ideas how to resolve this problem?

Hi,
Please turn off the Windows Firewall in the Control Panel for test:
Control Panel->type firewall in the search box->Windows Firewall->Turn Windows Firewall on or off->Turn off
Windows Firewall (not recommended)->OK
Then Make sure all computer
turn on the network discovery.
Also, apps that are managed from non-domain servers cannot see or control this Windows 7 machine
In addition, make sure the Server, Windows 7 and other comouter in the same network. Otherwise it can't be accessed each other.
Karen Hu
TechNet Community Support

TC joined network, but computer can't connect with TC

Easily got the TC up and running, successfully joined my existing wireless network- a solid green light. But when I tried to activate Time Machine, I keep getting the message "Connection failed- The server "xxxx" may not exist or it is unavailable at this time."
I waited a while, tried again. Same thing. Then I unplugged the TC, rebooted, and restored the factory settings on the TC. Again, successfully rejoined my wireless network. But got the same message.
I'd appreciate any thoughts....thank you very much

The Time Capsule performs no routing functions at all when it is configured to "join a wireless network". Therefore, the ethernet ports are not enabled.
In effect, when configured to "join", the Time Capsule simply becomes a wireless backup device and nothing more.
You might want to restart the entire network to see if the Time Capsule becomes available. You should be able to open the Finder and see the Time Capsule under the SHARED heading if it is successfully joining the network.
Message was edited by: Bob Timmons

My iPod is a 2008 version. I just bought a new iMac. My iphone and my ipad are connected to the ne w computer , but I can't figure out how to register my old device on the new computer

I have a 2008 IPod , Just bought a new IMAC. My iphone and ipad are registered but I can't figure out how to add the old ipod.

What have you tried?
What happens?
Error message?
What does it say?
Have you copied everything from your old computer, or your backup copy of your old computer, to your new one?

Looking for a bluetooth headphone for my Macbook Air and Ipad Mini, I am not looking for a headphone that needs a transmitter to be connected to the source rather a headphone that can be connected directly via bluetooth to the source device

I am desperately looking for a bluetooth headphone that would be compatible to my Macbook air and Ipad mini both. I am more of looking for a headphone that does not need a transmitter device to be connected to the source (in this case Macbook Air and Ipad Mini) and headphone acting as a receiver, rather need a headphone that would be connected directly via bluetooth to the source, it would be great if multiple apple devices be connected simultaneously. Please suggest some good headphones.

Hey sorry for the late reply, I was busy to figure out alternatives as harman kardon was a difficult affair to find and acquire, but the good news is I managed to get hold of alternative.
Sony I assume recently launched a Bluetooth headphone DR-BTN200 which is compatible to my MacBook Air , iPad mini and android phone galaxy s2 with ease, the sound quality is pretty good as compared to other brands of Bluetooth headphones I checked compatible or incompatible to apple devices alike, this is definitely what I was looking for, costed me 7990 INR, this is highly recommended for ppl who are confused, I carried my devices to the store and checked before I bought a pair and pretty much happy,
The best part of this is its battery backup, I have used this hours for 3-5 days but this has not drain even then, but I do keep this charging once in 2-3 days just to keep this ready otherwise it does not even ask for it neither the quality of sound drops after 2-3 days of use.
This is over the ear headphone which is very soft but it's get sweaty around the ear I guess that's bound to happen.
Do get back to me for any other details, would be glad to share with all :)

I connect on the wi-fi network but i can't connect in internet

Similar Messages

Maybe you are looking for