I connected an airport extreme (2013) to an existing pc network
I connected an airport extreme (2013) to an existing pc network and I had to change all my ip addresses. I managed to catch on to the apple replacement range and reset all my printers' addresses manually. Was there an easier way to handle this? Also, I lost the connection to my WD Worldbook drive though and haven't been able to come up with a work around. Any ideas would help, thanks!
First, to answer your question about the WD drive - I could not find it with an ethernet connection. I tried connecting to the usb port on the Extreme, but it was not visible there either.
When connecting an external network drive to the AirPort Extreme by Ethernet, the drive would be providing the file sharing service. This would be typical of a Network Attached Storage (NAS) device. If your WD Worldbook offers NAS services then it should be found by network clients per WD's instructions.
When connected to the Extreme's USB port, the Extreme would take over the file server services. However, the drive must not be formatted in either NTFS or ExFAT as either are not recognizable by the Extreme for sharing out. My guess is this is the case and why the AirPort Utility cannot "find" the drive.
If your WD Worldbook has an Ethernet interface that is the one you should use for best performance. It is still possible that this drive is using an IP address that is not in the default range of the Extreme.
How can I reset the IP range on the router. I have to use the iPad app to manage the router and I didn't see any way to change the range. Did I miss something or would I need to use an Mac computer to get more options?
You can change the IP address range of your AirPort using the AirPort Utility on your iPad.
To change the range:
Run the AirPort Utility.
Select the AirPort Extreme, and then, select Edit.
Select Advanced.
Select DHCP Range.
Select 192.168
Similar Messages
-
Airport Extreme setup problems on existing WDS network - Please help!
I just bought a Time Capsule and have setup a WDS network for the house. The Airport Express joins the network just fine as a remote WDS device. I cannot get the Airport Extreme (v5.7) to join the same network. It just continues to make a *separate network with the same name* despite the Channel being the same, the WDS being set to remote, and the main ID of the Time Capsule has been put in correctly. In other words, since I setup the airport Express correctly, I cannot figure out for the life of me why the Airport Extreme is not joining correctly.
PLEASE HELP. I've been trying this for 6 hours now and countless total restarts by hard resets of all the equipment.Hello arthung. Welcome to the Apple Discussions!
Let's double-check your WDS setup ...
(Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. Also, jot down the AirPort IDs for each of the base stations to be used in the WDS.)
o Perform a "hard" reset on the Time Capsule (TC) and a "hard" reset on the 802.11b/g AirPort Extreme Base Station (AEBS).
Main Base Station Setup - TC
o Click the AirPort status menu in the menu bar and choose the wireless network created by the TC.
o Open AirPort Utility.
o Select the TC, and then, choose Manual Setup from the Base
Station menu.
o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the AX.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup - AEBS
o Click the AirPort status menu in the menu bar and choose the wireless network created by the AX.
o Open AirPort Utility.
o Select the AX, and then, choose Manual Setup from the Base Station menu.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
(ref: Pages 42-46 of "Designing AirPort Networks.) -
How do I connect my Airport Extreme to my modem (Cisco Model DPC3010)?
I am having trouble connecting my Airport Extreme Wireless Base Station to a Cisco Modem (Model DPC3010). I have used the Airport Extreme for years with other modems with no trouble. Alas, this time around I can't get it to work. I think I might not have the cable connected correctly. Help, please. Thanks
I am having trouble connecting my Airport Extreme Wireless Base Station to a Cisco Modem (Model DPC3010). I have used the Airport Extreme for years with other modems with no trouble. Alas, this time around I can't get it to work. I think I might not have the cable connected correctly. Help, please. Thanks
-
How do I connect my Airport Extreme 802.11n to Epson 645 Printer?
I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer. Can anyone help me? Thanks!
You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
Reinstall Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless. -
How do I connect my airport extreme to windows 8.1
how do I connect my airport extreme to windows 8.1
Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))
-
How do I connect my airport extreme to wifi as a repeater
how do I connect my airport extreme to wifi as a repeater?
Thanks for the info.
Unfortunately, Apple has designed their routers to only extend or repeat the wireless signal from other Apple routers.
It would be extremely unlikely that the AirPort Extreme would be able to extend or repeat a wireless signal from another manufacturer's router.
I suppose that it could not hurt to try, but if the Extreme is still unopened, it might be a better idea to return the Extreme, get the information about the router at the neighbor's and then use a product from the same manufacurer that would be compatible to repeat or extend the wireless. -
How do I connect my Airport Extreme to an AT
How do I connect my Airport Extreme to an AT&T U-verse Modem/Router?
Connect an Ethernet cable between the U-verse router's LAN port to the WAN (circle-of-dots) port on the AirPort Extreme Base Station (AEBS). Since you will have two routers in series, you will want to reconfigure the AEBS as a bridge. (ref: AirPort Utility > Select the AEBS > Manual Setup > Internet > Internet Connection tab > Connection Sharing = Off (Bridge Mode))
-
Internet connection via Airport Extreme/router thats not working, why?
I have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougalI have been having problems with the internet connection via Airport Extreme which I find it a bit unusual and its still driving me nuts! This is what happened:
I have lost my internet connection last Sunday evening upon my return from a weekend away from home. The last time I have used the internet connection on my macbook was the previous Friday morning. Prior to the apparent disconnection on Sunday, I have always used my internet connection wirelessly through Airport Extreme (that is connected via ethernet cable to the NETGEAR DG834v2 ADSL modem which had worked beautifully until the problem arose on my return). This wireless internet connection allowed me to surf the internet anywhere in my home.
However, upon the successful re-connection to the internet via the modem router, I have discovered several new problems. I have tried to set up the internet connection wirelessly again but instead the following happened:
1. Router (Netgear) drops ADSL connection and cannot reconnect when connected to airport via Ethernet. (which is the case when using airport wireless).
2. Router connects to ADSL fine when computer is connected to it via Ethernet. (However, router disconnects when magsafe power adapter is taken out for some inexplicable reason!)
3. Router connects to ADSL fine when nothing is connected to the router (ie. No Ethernet connections)
4. Router connects to ADSL fine when connected to airport via Ethernet and computer is connected to airport via Ethernet.
So from the above, I cannot connect to the internet properly whether wirelessly or not so I suspect it could be faulty router or could it be airport extreme? I have asked my ISP for an explanation and all they have said is that it cannot be the mis-configuration but could be to do with the power adaptors or the way plugs are set up and suggested I take out all the power plugs (and power surge protector) out to switch everything off, the macbook, router, printer and airport extreme. However, when I have re-plugged them all back in, the problems I have described above still persists!
Would appreciate any help if anyone here recognises why this is the case and what seems to be the cause of this. If so, what should I do? Though I have written back to my ISP again yesterday for more help so im waiting to hear from them...
Thanks
u2dougal -
Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine
Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine
Yes, if the drive is formatted in Mac OS Extended (Journaled).
The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply. -
How do I connect an Airport Extreme to my ISP with a static IP address?
I have 5 static IP addresses from my ISP. The cable modem has five ethernet jacks. I run an ethernet cable from separate jacks on th cable modem to the devices listed next. I have one static IP address assigned to a Linksys wireless router for a MS network. Another is used by my VoIP router. I want to use a third static IP address for my Airport Extreme and set up a new network for a server running Leopard Server, iMacs, latptops. When I enter a static IP address in the Airport Extreme, I can't connect to the internet. Can anybody help?
When you configured your Airport Extreme with one of the five static (and public) IP addresses available to you - did you remember to also configure the Airport Extreme with your ISP's router (or "gateway") IP address as well as the IP address(es) of your ISP's domain name servers?
-
HT204057 Time machine back up via USB hard drive connected to Airport Extreme.
Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme? It worked very well.
Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
See the topic about Time Machine support for USB disks in this Apple Support document:
http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US -
I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?
Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire. -
Time Machine doesnt see my USB drive, connected to Airport extreme =(
Hello,
I've been trying to figure this one out for almost 3 weeks now, but with no luck. I have a usb hard drive, connected to airport extreme. I've clicked on "setup time machine", select "choose disk", there is no disk to select. So I click on the "set up time capsule, it takes me to airport utility. I then click on the "disk" button and file sharing is enabled.
I can mount the disk through the finder, just fine and able to transfer files back and forth, however time machine cant seem to pick up the drive. Would love to be able to use time machine to do backups, So can someone please help?
osx 10.5.5 with airport utility 5.3.2
Thanks in advance!Well this has worked for me. I have a Freecom 500Gb usb hard Drive connected through an unpowered 4-way USBhub to an Airport Extreme Base station. After mounting the Air Disk hard drive on my powerbook, I then dragged the disk to my user folder, thereby creating an alias. I have put that alias in my login items and now TimeMachine works beautifully. I've repeated it on a Mac Mini (also using OSX 10.5.5) and that seems to be fine too. Admittedly the back-ups take a long time over airport, but fine via Ethernet.
Good luck everyone who struggles with this.
David -
HP Laserjet P1102 print multiple pages - USB connected to Airport Extreme -
Hello,
My configuration is Windows Vista/7 - Bonjour Print - HP LaserJet P1102 USB connected to Airport Extreme.
Everytime I sent a print job - it get printed endless times until I hit "Cancel" on the print queue.
Help anyone..
Thank you very much,
- eagleputtHi gingerjedi,
It's normal with your actual Airport and confirm by Apple, but ...
Only If you see your printer in Airport Admin Utility under Printer :
1) Download and install : http://www.openprinting.org/download/printdriver/macosx/foomatic-rip-2008-01-30. dmg
2) Download and install : http://www.openprinting.org/download/printdriver/macosx/gplgs-8.61-ub.dmg
3) Download and install : http://www.openprinting.org/download/printdriver/macosx/hpijs-2.7.10-UB.dmg
4) Repair permissions with Onyx or with your Install Disk
5) Restart your computer
6) Restart your connection with your Printer (Cable-Power-Connection with your Airport)
7) In Prefs Panes, select Printer ( + ) and install a new Printer
8) Select your indicated Printer in the menu choice. If you have a Name for your Airport, give this Name under Place or Emplacement (excuse, i am French) and select HP Deskjet D2400 Foomatic/hpijs (recommended).
9) And click Done
With this Solution, you can just print. All other software possibilities can not run under the Airport. It is normal.
I think all is ok for you.
Message was edited by: thebuzzman -
Printing problems with HP 1012 connected via Airport Extreme - resolved?
I originally posted on this issue in a long-running discussion on HP printer issues.
http://discussions.apple.com/message.jspa?messageID=10109788#10109788
Problem: Upgraded iMac 10.4.11 to 10.6 Following upgrade everything seemed fine except that the HP 1012 connected via Airport Extreme was not responsive. The system knew the printer was there, had installed the proper driver for it.
Intermediate troubleshooting: I tried to use Airport Utility to check the AE. It timed-out when trying to retrieve the AE setup specifications. I tried to update the firmware (7.4.1 to 7.4.2); system timed-out after a very long several minute "search for new version of the firmware."
Apparent solution: (any of the following may have made the difference - sorry not to have been more systematic)
a. I turned off AP on the iMac.
b. I unplugged the AE base station for one minute+, then re-powered it.
c. I opened my MBP with 10.5.7. Started up Airport Utility.
d. I renamed the base station. Left all other settings alone.
e. I installed the 7.4.2 firmware upgrade.
f. I ran Preference Repairs on the iMac (though I had done this right after installation of 10.6)
g. I turned on AP on the iMac.
Result: Almost immediate connection to AP, printer quickly began printing several of the test documents that must have been waiting in queue.
Too early to tell if I will have any further problems if if it permanently fixed.
Thanks to the several messages in both Printer and Network categories that suggested one or more of the above steps.
StanI hooked up my wife's Deskjet 5150 to my mac via USB. Since the 5150 does not have a driver from HP to work in SL. I decided to us the generic Gutenprint v5.2.3. For the heck-of-it, I picked, HP Deskjet 5550-Gutenprint v5.2.3. It prints. and the utility works, BTW, I am low on black ink.
I also tried the other printer drivers labeled "any printer name"-Gutenprint v5.2.3. and they all worked with the 5150.
So now that I know that the 5150's will work via USB with SL, I will now upgrade the other two laptops in my house to SL.
How to:
Turn printer on.
open System pref/ printer-fax/ add printer
Select hp desktop 5100
(name: -- Change name if you want - I kept " hp deskjet 5100"
Location: Your computer
Print Using: open dropdown box, select printer software. Type in: " Gutenprint" or "deskjet". I picked the HP Deskjet 5550-gutenprint v5.2.3. but I do not think it matters as long as it is a -gutenprint v5.2.3 driver.
Select OK
Maybe you are looking for
-
Is iOS 6.1.3 compatible with iphone 4?
Because of previous iPhone devices that I've had, I'm always reluctant to upgrade to the latest iOS versions. My devices always never work as originally purchased and I see thousands of requests on how to revert back to previous versions. Is iOS 6.
-
Enable CMSS-3d for a 5.1 surround headse
Hi guys i have a turtle beach earforce HPA2 5. surround headset and a X-fi Extrememusic soundcard. I would like to know if anyone knows for sure if it is best to enable CMSS-3d for 5. headsets and this headset, or if it is best to disable CMSS-3d. I
-
My calendar alerts don't always pop up.
Sometimes they do, sometimes they don't. I have tried to not rely on them too much but it would be really nice if they'd just work. Alerts are enabled in General Settings and everything seems fine, but it just doesn't always seem to work. Any ideas o
-
Using Gmail with my Orange email settings
I am looking to use Gmail with my Orange account seetings. The pop.freeserve.net server configuration works (recieve) fine but I cannott get the smtp.orangehomephone.co.uk (send) settings to work. The login details are correct but the Orange server t
-
Waiting time report in Historical Reports tool
Hi all, I'm looking for a report over caller waiting time. I can't mange to find such report in the Cisco Unified CCX Historical Reports tool. What shoul I look for? Best regards Kristian