I connected my iPhone 4S to wifi,but why the wifi signal will disappear whey I lock the screen and when I on the screen it will appear back in 1 second...why?
What problem with that?
When the phone goes into sleep mode (screen locked), after a few seconds of inactivity, the wifi will disconnect. This is by design to help further battery life. Once you wake the phone up, it connects. Nothing wrong with the phone, working like it is supposed to. The only way to wifi connected all of the time is to have the device connected to power.
Similar Messages
-
What would be the reason why when i try to connect my iphone to a wifi server; it doesn't work? It also doesn't pick up any wifi connections.
go to settings>general> reset network connections and then try again
-
I recently connected my iPhone 3GS to my computer, for the new update 3.4.5, but i didn't load at all. Not even after 3 hours..
so i tried to disconnect the phone, but the loading meter is still there like it's frozen can't push any button or anything at all.. what should i do?Restart your iPhone by holding down the on/off and home buttons until your see the Apple logo.
-
I need to update my iphone software, but I get a message saying that I need to transfer my songs from my iphone to itunes first. There used to be a Transfer link on the summary page when I connected my iphone to my macbook, but I am unable to find it now.
Welcome to the Apple Community.
Select the device from the device list, then file > devices > transfer. -
i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can any1 help me?
If you have a backup of your information on your computer, I would suggest putting your phone into recovery mode, by holding down the home key and keeping it held down while you connect it by usb into your computer with itunes running. Keep the home button held down until it indicates recovery mode, and proceed with the restore.
-
Why only videos on iphone can be deleted but not the music or sync photos?
Why only videos on iphone can be deleted but not the music or sync photos?
Because that is the design of the iphone.
Music and photos are added/deleted via the sync process. -
i'm using iphone 4s with ios6, but why can't make facetime over the cellular networks?thanx for the answer
Depends on your carrier and data plan.
With ATT in the US for example, you can FaceTime via ATT's cellular network if you have a shared data plan only. -
I cannot connect to iPhone personal hotspot. What's the problem?
I have connected to iPhone hotspot using wifi and USB cord in the past. My current problem started with my wifi about a month ago. My wifi on my iPhone would not toggle on (grayed out) for about 2 weeks. After rebooting and restarting, I finally had to wipe phone clean and start hardware from new. After powering down several times over the following week, it surprisingly started working again. However, it will continue to go in & out sporadically. My iPad and loptop will recognize my iPhone's wifi, but will not connect. I can connect through USB cord and iPhone shows 1 connection, but laptop will not pick up connection. I have also tried to reentered password. All software is current. What's the problem?
Try the USB troublshooting tips here: http://support.apple.com/kb/ts2756
-
I cannot connect to Apple store, my WIFI is ok, i already made an apple id and verified thru e-mail. Please let me know the possible reasons why i cannot connect to apple store?
You need to first disable your antivirus and security programs and see if you can load the itunes store then. If so you know its antivirus blocking you.
Secondly due to xmas the itunes store is seeing a HUGE amount of people who got new ipods and/or gift cards. Yes Im sure apple tried to prepare for this but they can only estimate how many extra people they will have. Also SOME ISPs in local areas are limiting access for there costomers to the itunes store to save on overloads on there servers. Far as all this goes (If this is why your not able to connect) it should normalize after new years when people go back to work and school. Seems alot of people post about this issue during peak times which are normally between 8pm and around 10 pm when most people are on -
When I connect my iphone to pc I systematically have the message asking me to associate it
When I connect my iphone to pc I systematically have the message asking me to associate it to my pc. I do it and then I've always a message saying it is already associated. How can I get rid of this step ?
I tried to break the association and do it again : but it remains the same.
Here is a copy of message :
In addition to that, with last version of itunes (11.0.2.26) each time I run itunes I've the message : "an unkown error has occured (-42110)." I click OK and it runs correctly ???
Any ideas ?Non c'est normal: "appareils"= iPhone, iPod, iPad... Votre ordinateur est dans "Ordinateurs autorisés"
-
Have brand new iphone 4s. Wifi signal is very weak even when very close to router. I have also an iPod Touch and when both are side by side, the iPod wifi signal is excellent and the iPhone wifi signal is very poor??!!! Hardware issue? or software issue? I was hoping it is just a software issue, but...
Saw may web sites discussing this same issue; many discussions point to hardware problems but there is no official word from Apple about it, which is disapointing !?? Few discussions point to software problem with solutions based on try and error, and they don't seem to work.did not help at all; the problem continues the same
-
Any reason why my MacBook Pro keeps dropping the WiFi signal - will be fine for ages and then just drops it! Does it at home and work so not either broadband connection
jp270759 wrote:
Hi. MAny thanks for the answer. Am new to Apple - what's the "real" MacBook Pro forum?
I would like to know also!
For your issue - Solution may be found if you search in the "More Like This" section over in the right column.
Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting -
My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!
Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace -
When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?
iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538 -
My ipad 4 is in recovery mode and says connect to itunes, but when i connect to itunes it says nothing. but in the device driver properties on my computer it says my ipad is in recovery mode. what should i do?
please help!See: http://support.apple.com/kb/HT1808 to restore the phone using Recovery Mode. You will lose all content on the phone. This is the only way to bypass the lock screen if you don't have the last computer the phone was synced to.
Maybe you are looking for
-
Problem in Exporting to Excel 2007 using CRServer 2008
Can anyone please help me know the difference between Crystal Reports Server 2008 and Business Objects XI R2? Both the support guides says that it supports Office 2007. I have a problem in exporting the reports to Excel 2007 .I have downloaded the tr
-
Sound - No microphone gain ?
MSI P35 Neo 2 FS Intel E8400 processor 2 x 1 Gig Corsair Ram 8800 GT Graphics card 550 watt Trust PSU Window Xp Home Edition. Realtek ALC 888/888T audio. When I try and connect to SKYPE the recipient informs me that my microphone volume is too low, a
-
How to migrate SAP Bex Query to BO report
Hi All, I want to migrate some of the reports from Bex Query to SAP BO. Will you suggest me what are the best ways to do this,Whether there are any tools to do this?? Regards, Shiva Kumar G.C
-
FCP 5.1.1 won't start on MacPro
Got my lovely new mac pro last week and FCP studio 5.1 arrived this morning... but, when installed FCP it opened ok... and Motion wouldn't open. I used software update and there were a ton of updates for all FCP studio apps. But, now Motion is prefec
-
I've updated to version 9.0.2, and today when I use the "File->open" function the program freezes. I have to use task manager to kill RH9. I can open a project by double clicking the XPJ file, but while in the project the file open command freezes th