I connected my iPhone 5 to my mac-book pro and the mac-book wont turn on?

I think the cable may be fake?  When i connect the macbook to the charger the light on the charger flashes.  The mac-book will not boot or turn on.

Use some self reliance and do a search!!!
http://lmgtfy.com/?q=iphone+won%27t+turn+on

Similar Messages

  • I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any indi

    I have an Apple iphone 4s and for the last 4 weeks I cannot download or update any apps. I have an iPad and a Mac book pro and the apps download on these devices fine. My phone tells me that I have 12 updates but when I press update all or update any individually nothing happens at all. It also does not ask me for my password any more but my iPad and mac book do.
    I have signed in and out of the app store and the password is correct. I have tried both kinds of reboot but that did nothing. I have tried to update the apps by connecting phone to Mac book pro...it shows the apps being download on the Mac book and says it will sync them to my phone but it does not. Everything else on my phone works fine.
    Any ideas ...Please!

    Thank you, this has resolved both the iphone and ipad problem immediately.  I am concerned that I may have a problem with apps that I bought under my old  AppleID as they will not be recognised.  Any suggestions for this please?

  • I start my mac book pro and the screen goes white with an apple in the middle

    I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging  but then it turns
    off again

    Reinstall Snow Leopard without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I dropped my mac book pro and the screen now has black and coloured lines in the corner. what is it and how can i fix it?

    I dropped my mac book pro and the screen has now got a black rectangle and pink and green lines down it. What is it and how do i fix it?

    Sounds like the display got damaged. Connect an external display and see if that's OK. If that's OK then the display is probably damaged. You can try reseating the LVDS connector but if that doesn't help the connections on the display body are very difficult to get to. Apple would just replace the entire display and that's what I would do as well.

  • I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that

    I just bought a Mac Book Pro and the Appstore show one upgrade of iPhoto (9.2.1). I started a section with my Apple ID (the account that I have I use to iTunes) but when I try to update it says that there are upgrades available for other accounts and that I have to upgrade using the account that I used to buy iPhoto. What do I have to do to upgrade iPhoto?

    Dear Katty,
    Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
    https://discussions.apple.com/thread/3374419?start=0&tstart=0
    https://discussions.apple.com/message/16628399#16628399
    Do you have an idea of how can I solve this problem?
    Thank you very much again.
    Best regards,
    Alfonso

  • I have a digital voice recorder with a 3.5mm mic and headphone jack and want to transfer some recorded lecture to my mac book pro.  The mac book does not have 3.5mm  jacks.  Does anyone know if a jack to USB converter would work?

    I have a digital voice recorder with a 3.5mm microphone and headphone jack and want to transfer some recorded lectures to my mac book pro.  The mac book does not have 3.5mm  jacks.  Does anyone know if a jack to USB converter would work?

    Is there a pattern to the time of day or other detail that may be
    traced back to a OS X system cause of this odd phenomenon?
    Are there any copies of system files on any of the attached USB
    external drives? Any libraries, such as iTunes, iPhoto, etc?
    Once the drives are indexed by Spotlight, are their permissions
    ignored by the OS X? Content, if neutral, should not affect the
    wake or sleep cycle; especially if they're ignored by the OS X.
    Could there be a bad cable or other component? If so that would
    be a difficult process of elimination to detect it. Usually replacing
    most suspect components in the USB stream (external to Macs)
    is a rote way to mechanically test that idea; & not 100% sure.
    Does the equipment all have a good ground to the utility or house
    electrical field? An intermittent ground may affect more than sleep.
    Hard to say at this point. Maybe a late-night talk radio guru on
    remote viewing could peer into your situation and sleuth it out?
    Sorry to have run out of ideas, but the process must be electrical
    & mechanical to some extent. - Or perhaps odd software inspired.
    Do you have any phone-home spyware items inside, just jumping
    at the chance to spill your information? Little Snitch may help.
    PS: Perhaps the computer needs to go into Apple & have a genius
    or product specialist at AASP test the unit thoroughly... BlueTooth?
    see:
    https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
    Good luck & happy computing!
    edited 2x

  • HT1338 Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you

    Hello, i currently acquired a Mac Book Pro and running Mac Os X 10.8.3, but i have failed to get the driver for my canon inkjet printer. could anyone help me out please? Thank you

    You may be able to download it fom here:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • Hello there iv got an mac book pro and running mac os x 10.5.8

    hello there iv got an mac book pro and running mac os x 10.5.8 and want to upgrade what can i upgrade to snow leapard

    All MBPs 2011 and earlier can have Snow Leopard installed (Late 2011 requires a bit of shoehorning).
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Ciao.

  • My Macbook Pro 13¨ i7 wont turn on. I press the on button and the white light wont turn on, I don´t hear and fan noise, or the beeping sound. This Mac is 1 1/2 months old. Can anyone  help.

    I press the on button and the white light wont turn on, I don´t hear and fan noise, or the beeping sound. This Mac is 1 1/2 months old. Can anyone  help.

    You are under warranty. You can call Applecare and get advice from the tech rep, or you can bring it to an Apple store or authorized Apple service provider.

  • Just completed a clean install of CS6 Photoshop on my Yosemite Mac Book Pro and the Adobe Application Manager does not work and cannot install a fresh copy from Adobe

    Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy.  What should I do?
    I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM.  But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install.  It is like an infinite loop!
    Please, someone help!
    Thanks!

    HI gener7!
    I'm sorry but I am not on Creative Cloud.  I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application.  My AAM version is:  8.0.0160
    The link you provided was the update that I wanted to install but it does not work.  A window shows up during that install that says:
    We've encountered the following issues.
    Installer failed to initialize.  Please download Adobe Support Advisor to detect the problem.
    and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
    Thanks!

  • Started my MacBook Pro and the Mac OS X Utilities screen shows up. Not sure what to do.

    When I restarted my computer, it booted to the Mac OS X Utilities screen. I'm not sure what to do from here.

    Odd. It apparently booted into Recovery Mode.
    For good measure, choose Disk Utility, click on the Macintosh HD volume on the left and run Repair Disk and Repair Disk Permissions by clicking on the buttons. Then quit, restart and hold down the Option key prior to the startup chime. When a list of disk icons pops up, click on Macintosh and the arrow to boot from it.
    If this happens again in the future, use AppleExpert's instructions for resetting the default boot volume.

  • My iPhone keeps showing an error message and the external speaker wont work

    Ok I have had my iPhone 3GS about 3 months now and recently it has started showing an error message "This accessory is not optimized for this iPhone, you may experience noise caused by mobile interference and a decrease in mobile strength". The external speaker will not work either, the only sound it will produce is the ringtone. Any other sound, message tone, sounds from apps, songs on my ipod, sounds from videos, will not be produced! Although when i plug the head phones in the sound will work for everything and then this error message will come up again and the sound will stop working. It's like the phone thinks it is plugged into a docking system or something. Also the phone will lose signal for long periods of time and sometimes not come back unless i restore the phone. I have tried EVERYTHING and nothing has worked, can anyone help me please?

    Or you can try what lots of other people have found, and thats that the base connector is dirty and the contacts are shorted by some debris.
    The Apple store guys are good at cleaning them out - if you do it yourself, do not use any liquids at all.

  • Updated my iPhone 5s to 7.0.6 and the phone won't turn back on.

    Phone won't turn on after Apple update 7.0.6. Any ideas of the problem and solution?

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting, but it can cure some glitches.
    If this does not work, try to connect in recovery mode, explained here:
    iOS: Unable to update or restore

  • My iphone 3gs is working on ios5 and the spotlight search wont work at all

    HELP

    Or you can try what lots of other people have found, and thats that the base connector is dirty and the contacts are shorted by some debris.
    The Apple store guys are good at cleaning them out - if you do it yourself, do not use any liquids at all.

  • When I connect my iPhone 4S to my MacBook Pro, the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started". What does that mean?

    Hello,
    When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
    What does that mean?
    Thanks in advance for fixing my problem.

    I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
    EDIT: Here, this might help: http://support.apple.com/kb/ts1567

Maybe you are looking for