I could load Yamaha C7 grand in Logic Pro BUT I could not load in MainStage

Hi there, I tried to load Yamaha C7 grand in Mainstage, but i won't load but instead a "Organ sound" after i choose Yahama Grand. ALL the Yamaha grand in Logic could be loaded and sound perfectly ok. Could some one help me to solve my problem in Mainstage? Thanks a lot!

Hi
If all load OK in Logic, you could try saving the Channel Strips in Logic, then open them in MS?
CCT

Similar Messages

I am using logic pro x and do not know how to fade a track at the end of a song or change the volume in a portion of the track.

I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.

Hi
rmarlia wrote:
I am using Logic Pro X. I do not know how to fade the volume at the end of a song or raise / lower the volume in an area of the track. I also have a loud instand volume blip in a portion of a track that I would like to lower or eliminate.
Armadillosound wrote:
To create a fade out press T to open the tool menu and select the fade tool.
Completely inappropriate, and they all also not help with volume adjustments. Fades will only apply to Audio Regions in the Tracks area: they will not fade out the complete mix unless you first Bounce it, add that to the Tracks area, apply the Fades with the Fade tool, then Bounce in Place (Again).
Much much better to make use of Track automation to take care of Volume adjustments, and to Fade out the end of the song by applying Track Automation to the Output Channel
https://help.apple.com/logicpro/mac/10/#lgcpb1a1ea03
CCT

HT200055 I have flattened a take folder, but Logic Pro X will still not let me use the crossfade tool on the clip.

I have flattened a take folder, but Logic Pro X will still not let me use the crossfade tool on the clip. How can I crossfade a flattened take folder?

Please repost in the Final Cut Pro forum. Have you considered upgrading your machine, if you are still running Leopard your machine may be as old as 5 years old. While this should not matter you probably won't get the performance you want out of a demanding app like FCP.
Best of luck.

HT200260 I already bought logic pro 9 but now i have a new apple id, do i have to pay logic pro 9 again or not??

I already bought logic pro 9 but now i have a new apple id, do i have to pay logic pro 9 again or not?? Or if i save it on a disk can i re-draw it into my macbook?

You can also contact Apple directly providing proof (The original receipt) you bought it originally on a different Apple ID and under certain circumstances they will transfer the App you bought over to your new Apple ID
You will probably also need to know what the older Apple ID was, along with other information used with that account (Like the credit card used for example)
Call them and see what they say once you have all your information together...
An alternative if you are running iOS8 on any of your devices or Yosemite or Mavericks.. on a Mac, is to simply add the old Apple ID your Family Sharing account.. using your new Apple ID as the master account... then every app you bought under the old Apple ID (if it is still active) will be available to download under your new one...
http://www.apple.com/icloud/family-sharing/

When i´m closing a project in logic pro x plugins does not close... why?

When i´m closing a project in logic pro x plugins does not close... why?

My guess is you are simply clicking the 'Red X' in the top left of the window to close the current window and not closing the project....
To close the project, go to file/close project in the menu bar or...
press Option + Command + W

How can I use the sounds of the Yamaha Motif XF6 in Logic Pro 9?

I have Logic Pro 9 on my Mac Book. I also have a Yamaha Motif XF 6 synthesizer. Instead of using Logic's software instruments I would like to record the sounds of the Motif directly into Logic.
I have been told that an audio interface is necessary for this. What kind of audio interface would be good for this? Any in particular?
And, once I have obtained the interface, what steps do I need to take to hook up the Motif into Logic to utilize the Motif's sound bank?
Detailed steps would help, as this is new stuff for me.
Thanks!

Since this is a user forum only, and your questions will take a lot of time to answer you might want to check both the Logic manual and the XF6 manual. The XF6 has possibilities such that you may not need and Audio interface if the Firewire option is present.
Also you have a built in USB MIDI interface as well, you will need to download the Yamaha MIDI driver.
Read Exploring Logic Pro, especially chapter five, you can record your performance via MIDI, edit it and then commit to audio.
Dig in.

Instruments in Logic Pro 9 Library will not load: I try to add a new instrument on a project and get a "cannot be found" error.

Ladies and Gentlemen,
As a faculty member in the School of Music, I have just acquired a copy of Logic Pro 9.1.8 through my University. The programs and instrument packs were installed by our IT department and show as being fully installed on Logic Pro when I search for additional content through the Logic Pro tab at the top of the screen. The window shows that all 6 Jam Packs, Logic Pro & Main Stage Content (Essential and Additional) GarageBand content, and Surround content is installed. However when I try and add a new instrument on a project, most of these instruments cannot be found. I get the following error:
Audio file “KB_pizz_f_C1.wav” not found!
I then press the Continue Tab, and it looks for the instruments in an empty file that Logic creates in the Music section of the hard drive. I have investigated the sounds by going through the MAC Hard Drive>Library>Application Support>Logic>Sampler Instruments folder, and tried to copy the sounds into the Music>Logic folder created by the program. That does not work either. Even attempting to go into these Logic Pro instrument files one at a time has proved fruitless. I am told that the file cannot be opened.
The files appear to be installed, but cannot be accessed or opened. They all have that translucent grey appearance when I attempt to click on the icon. This is true for about 80% of the files in the instrumental library. Whenever I create an instrument, the EVP88 Electric Piano is installed by default. There are a few instruments that I can successfully replace this default instrument with, but a majority of the instrumental library remains unavailable. Can anyone help?

Kurt:
You might try a different way of adding the video files to the web page. This demo page has one where the file does not load until the play button is selected: Opening Item in a New, Precisely Sized Window. This demo page has 9 short videos on it using that method: PhotoPresenter Animated Slideshow Themes. Just add a screenshot of one of the movie frames or any photo you want and add the Play button on or below it.
You manually upload the movie file to your server so iWeb is not involved in the uploading the file at any time.
Similarly this demo page, QT movies via iFrame, has a method that has you manually uploading the file to the server and linking to it via iFrame code. That page also has other similar methods.
Another method is demonstrated in Roddy's iWeb for Musicians site on his Video page. Here you also upload manually.
OT

Can't connect Yamaha P-35 to Logic Pro X

Hello.
I am running an iMac with OS X Mavericks (10.9.2), 2.9 GHz Intel Core i5 Processor with 8GB 1600 MHz DDR3 memory.
I am using Logic Pro X and am trying to get my Yamaha P-35 Digital Piano to act as a Midi controller. I have a USB to MIDI adapter cable, consisting of both an In and Out 5-pin Midi cable running through to a USB plug. I have my USB plugged into my iMac and the MIDI plugs in my piano. There are 3 lights on the adapter cable, Midi, USB and one with a musical note above. Only the USB light is lit up.
My aim to use the piano as a controller, to play Logic Software instruments with but Logic seems to not be aware of the piano being plugged in. I am looked on Yamaha's drivers page also and there is not one for this device, only older models.
Any help would be appreciated.

Try reversing the in and out on the keyboard end.... if you havent tried that already.... as these cheap cables sometimes are mislabelled... and given how you are using the keyboard, you only need the out from the keyboard going to the in on the cable...
Other than that, yes, almost all of the cheap midi usb cables have the same issues.. Some work... some work some of the time... and more often some don't... not reliably at least..even if they are the same brand/model... There is no way to know for sure until you try them out.
The real solution is to get yourself a decent midi interface or better still, an Audio/Midi interface like a Motu for example... which has stable, reliable drivers... and a build quality using decent components. Using a cheap interface or cable with a Mac... is akin to putting $50 tires on a $300k Ferrari... They kind of work but the end result isn't real driving..... and you are degrading the Ferrari's performance down to that of a 15K family sedan

Yamaha Motif XF Into Logic Pro x?

I am trying to run multiple tracks out of my Motif XF keyboard into multiple tracks in Logic Pro X via firewire. I just want to record about 5 - 8 channels in Logic while I am playing multiple parts on seperate tracks on the keyboard.
Thanks for any help you can give me.

After initially messing around with the MIDI Environment box for a while, adding Channel Splitters, eventually I found out that it's as simple as:
In Project Settings > Recording, check the box to "Auto demix by channel if multitrack recording". And make sure you've got Software instruments for each channel needed.
Bingo.

Logic Pro X: One MIDI note won't play

I am having a strange problem with Logic Pro X. I use a Yamaha CP33 as my main MIDI keyboard, connected by USB. In the past couple weeks, a strange problem has emerged - one of the notes from the keyboard, the B-2, to be specific, just doesn't trigger. At first I thought the key was broken, but it's okay, because:
- all keys work fine when I use the keyboard's analog audio output
- all keys work fine in MainStage
- the non-functional key moves up and down if I choose to transpose the notes on the keyboard.
So I have concluded that it's a software issue specific to Logic. I have already tried reinstalling the Yamaha USB MIDI driver, it didn't help. Could it be some obscure setting in Logic that is messing things up? What do you suggest can I do to fix this?

Hi
You may have set up LPX to use that MIDI note as an automation control, or as a keycommand
a) Go to Preferences;Controller Assignments & check there
b) Go to Preferences Key Commands and check there
Might be quicker to reset aboth?
CCT

Logic Pro is download is not working

Just got logic pro 9 from the app store. After running the download where it says it is installing the 2GB of Basic Content, it loads the 2GB, asks for my password, and after entering the password, the program and download just shut down. What is causing that and how do I fix it?

Got the same problem and it is enough space left on the hard disc, more then 80GB.
Here's my install.log:
Dec 15 21:43:31 falcons-MacBook-Pro installer[976]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Dec 15 21:43:31 falcons-MacBook-Pro installer[976]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/var/folders/TO/TOUU4R41HfqbQO3jbUctNk%2B%2B%2BTM/-Caches-/com. apple.MusicApps/audiocontentdownload.apple.com/lp9_ms2_content_2011/ProAudioCore Content.pkg#ProAudioCoreContent.pkg
Dec 15 21:43:31 falcons-MacBook-Pro runner[978]: Administrator authorization granted.
Dec 15 21:43:31 falcons-MacBook-Pro installer[976]: Package file://localhost/var/folders/TO/TOUU4R41HfqbQO3jbUctNk%2B%2B%2BTM/-Caches-/com. apple.MusicApps/audiocontentdownload.apple.com/lp9_ms2_content_2011/ProAudioCore Content.pkg#ProAudioCoreContent.pkg not supported by PK
Dec 15 21:43:31 falcons-MacBook-Pro installer[976]: Will use IF session
Dec 15 21:43:31 falcons-MacBook-Pro installer[976]: PFPackage::packageWithURL - can't instantiate package: /var/folders/TO/TOUU4R41HfqbQO3jbUctNk+++TM/-Caches-/com.apple.MusicApps/audioc ontentdownload.apple.com/lp9_ms2_content_2011/ProAudioCoreContent.pkg
Dec 15 21:43:31 falcons-MacBook-Pro installer[976]: Error opening package "ProAudioCoreContent.pkg#ProAudioCoreContent.pkg".
Dec 15 21:43:31 falcons-MacBook-Pro installer[976]: Install failed: Das Installationsprogramm hat keine Software zum Installieren gefunden.
Any help would be very appreciated.

Hi. I've changed my hard drive on my macbook pro and wanted to reinstall logic pro but although I took the serial number from the "about" box it rejects it when I try to reinstall. It was an upgrade to Logic 8 originally. What can I do? Urgent!

Hello. I have installed a new hard drive on my Macbook Pro with OSX Tiger. I tried to reinstall Logic 8 Pro but it refuses the serial number when I try to install it. I took the serial number from the "About" box when Logic was still installed but no good. The software was originally an upgrade, and I don't think I have the disks for the previous version. What do I do? This is important because I only use the computer for music. Thank you.

There's actually an even simpler solution that doesn't include buying a new version of Logic. He can use his original version easily. Of course, that depends if the OP knows how to effectively use his computer though...

OS X Lion and Logic Pro 8.0.2, not compatible??

I just installed Lion and now when i try to open Logic Pro 8, it tells me it's not compatible with the OS... any help????

Same, just installed lion, and logic 8.0.2 doesnt run now.. seems a bit wierd how somehow an apple product doesnt run on apple anymore...
Can we download an update to 9 to work on lion (if so whats the link?)
I dont want to crack or hack so dont worry about that.
Or will apple release an update to make 8.0.2 work in lion
Main question will it be possible to upgrade this now unworking logic 8.0.2 from within OS Lion with an update or upgrade?
Links, price?
THanks

Logic Pro X: Audio file not found?

I have Logic Pro X, and this problem has never occurred before but...
I was mixing one of my songs and everything was perfect, then I made sure to save it.
As I reopened literally 10 seconds later (not sure why I even closed it) it was showing me a message that said "Audio file not found"
At least 12 audio files went missing out of nowhere. It's only the files recorded from Logic that are not found.
I tried to locate them through my Finder but I don't know where my audio files are stored onto my macbook, and it doesn't seem to be in an easily accessible place.
It's just weird because they were all fine just before I closed Logic, then they disappeared.
I checked the audio bin in Logic and they seem to be there but they seem corrupted.
If anyone can help, or at least show me where audio files are stored on your mac from recording through Logic, that may help.
Thank you.

To clarify:
Logic Pro X
I have also experienced this issue as a result of having recording delay set other than zero, and rectified it by returning to 0.
Otherwise,
[Command 8] or
Window > Open Project Audio, select audio files that appear flatline, click 'Audio File' menu at top left, click 'Refresh Overview(s)'.
No way I know of to auto-enable this.

I buy logic pro but i get no serial number to license it

Hi, i buy last night logic pro in the app store . I download it and install it, but now he want an Serial number for licensing.
i got no serialnumber!
any idea?

App Store apps do not require serial numbers. Did you have another version of this app installed before you bought the MAS version? Did you properly remove the previous version before installing the MAS version?
If no, you will need to uninstall all of the current installation of Logic Pro and then download and install the MAS version again. Use an app remover, such as AppZapper, AppDelete or the free AppCleaner.

I could load Yamaha C7 grand in Logic Pro BUT I could not load in MainStage

Similar Messages

Maybe you are looking for