I could not get firefox to work so i uninstalled it and tried to re-install it and now it wont install and im having to use IE. I want to get my firfox back so i can have my bookmarks back. Why cant i install it?
I also tried a system restore and it wouldnt work after that either. I can not even get it to install when i go to the website to install it, it goes through the whole process like it installed it, but it never shows up.
You can reinstall Firefox by overwrite it.(Remember download version lasted). Don't insintall your old version Firefox.And all bookmark,add-on will not be deleted.
Good luck!
Similar Messages
-
I am using WIndows 8 RP. Firefox used to work fine till yesterday. Yesterday I got a message that Firefox is updating, and since then I could not start Firefox again.
As the window starts and crashes there is no way I can see any error message.
I uninstalled Firefox, downloaded, and reinstalled again.
But no use, the problem persists.'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.'' -
Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
ThanksLiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well... -
Could not get firefox to start this time, have been using it for years
I have been using firefox for years on my hp laptop. It happened that now I could not get it opened. I have tried uninstalling and reinstalling it, still clicking on the firefox symbol and waited. It just stoped downloading. I have tried many times. Other browsers still work.
I have the same problem...Hotmail say to optimize the browser you use, so we need to know how to optimise FF 3.5.13 please..
-
when i try to sign on to to I message I get the error message. IMESsage activation, could not sign in. Please check your network connection and try again. I have a network connection and can access the internet. what do i need to do?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
I keep getting the Software Update for Firefox 5.0. I try to update after viewing the informatiion choosing English and MacOS X. It downloads and then I get the message: "Acrobat could not open ‘Firefox 5.0.dmg’ because it is either not a supported file type or because the file has been corrupted (for example, it was sent as an email attachment and wasn’t correctly decoded)."
I would be most grateful for any help; I am 78 and trying but not succeeding. Ah, the scourge of age.Sorry, Firefox 4.0.1 isn't supported any longer, that's why you are getting re-directed. Firefox 5.0 is a security update for 4.0.1; Firefox 4.0 didn't get that update, but Firefox 3.6.18 did. Best to stick with 3.6.18 until whatever you are using for those logins is updated for Firefox 5.0.
-
Each time I try to install itunes I get a windows installer message telling me that the installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.....
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
When I click on an Icon on my desktop to take me to a site (such as Google) I get a message that it could not find the location. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened. Then when I close the window I see that the message is still there. I have to close it separately. Any suggestions? Oh, and this only happens if Firefox is NOT already active. If I have another Firefox window open when I click on the Icon, it just opens as expected. This message appears no matter which site Icon I select. It did not happen before I upgraded to ver 9.0.
Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?
Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device? -
whem installing itunes on my mums new computer which is windows 7 i get this message everytime "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"
Let's check your Windows system.
1. Have you done all the important windows updates and service Packs on your system. If not do it now. START button, type in Windows Update and ENTER. Select 'CHECK FOR UPDATES'
2. Let's check your Windows system files for possible file corruption
SCAN and repair possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
3. Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally. -
I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps at all. And 2, Lr everytime I load it up it gives me the option to retry or switch to and it takes a while for me to even get anywhere with it I think it has something to do with the catalogs? I've been using these programs for a few years now on a Mac...no problem but when I use a PC when I'm away coz it's the (only) comp available these happen PC's are so useless! Please can anyone help??...
I can give a few suggestions on Photoshop CC 2014, but Lightroom is a separate forum and you should ask Lr questions there.
First close Photoshop.
Then start Photoshop by double-clicking on it's icon and very quickly after that, hold down the ctrl-alt-shift keys until you see the reset dialog. answer "Yes" to delete settings, and let Photoshop continue to load.
It's tricky to do and may take a few tries, but at least it should reset Photoshop CC 2014 to defaults.
Gene -
hi...m using a mac pro quad core.....its not booting up...i can only see the apple logo and a circle loading...could not get into the login screen...any suggestions please.....m in the middle of a project and now i have got this one
regards,
v.s.bharanWelcome to Apple Discussions!
Do you keep your data backed up?
If not, you should always do so*:
http://www.macmaps.com/backup.html
You never know when a hard drive or a directory might go bad. Having a bootable clone is a must.
That link also shows you some tools you can use to recover data.
If you aren't backed up, try buying those tools first, before attempting to repair the directory.
Directory issues can be fixed with these tools*:
http://www.macmaps.com/directoryfaq.html -
When trying to sign in to Face Time, I continually get "Face time Activation" "Could not sign in. Please check your network connection and try again". I am able to access the internet via Safari, so my network connection seems to be working. What am I doing wrong, and how can I access Face Time?
Hey sklingen,
Thanks for the question. I understand you are experiencing issues signing into FAceTime. The following article may help to resolve your issue:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M. -
E1200 - Could not get it to work with Apple Airport
Could not get it to install and gave up after tearing out my hair in frustration
What's great about it: Still wondering
What's not so great: Everything else
About me...
Internet phone user
Business Professional
No, I would not recommend this to a friend.
I use it in...:Small homeBefore I suggest you any troubleshooting steps, I would like to ask few questions. Like – in what manner you were trying to connect Airport Express with the Linksys/Cisco router E1200?
Basically, you can think of Airport Express as a wireless extension cord for replacing an Ethernet cable, a USB cable, and an audio speaker cable. So, it suppose to work wirelessly with the router. So, in this case you have to use the Linksys/ Cisco router E1200 as a Base Station, with the Apple AirPort as the repeater/secondary access point. (The protocol for this is called WDS. Apple's routers support it; the Linksys does as well.
Here are the steps to configure;
Configure your Linksys router (open a web browser to http://192.168.1.1):
Assign a wireless channel. You will have to set the same channel on the Airport Express.
Write down the MAC address for the wireless interface (under the Status tab).
Provide the security level which can match with the Apple Airport.
Configure your Airport Express (using Airport Utility):
Under Airport -> Wireless, set the Wireless Mode to "Participate in a WDS Network", and set the network name, security, password, and channel to match that on the E1200.
Now you'll have a new tab: under WDS, set the WDS Mode to "WDS remote” and the WDS Main to the MAC address you wrote down above. Also make sure to that "Allow wireless clients" is checked!
Under the Internet tab, set Connection Sharing to "Off (Bridge Mode)".
Click Update. Wait for the Airport Express to restart.
Check it:
Once the Airport Express is restarted, reconnect to your wireless network (if you've been disconnected). Make sure you can see both your main Linksys router (in a web browser) and the Airport Express (in Airport Utility). If you can only see one, it didn't work. Try disabling security on both. -
I set iCloud up last week and the next day when out in the field I could not get Outlook to open up. I want to change my settings so I can get mail at home or in the field, not just when i'm at home. I have a PC and fios internet with Verizon at home. I have a Sprint air card in the field or access an available wifi. I want to change my settings to allow for receiving email in the field. What's the point of an air card and icloud for backup fi it doesn't work in the field for some odd reason?
Apple - Support - Mail Setup Assistant
Maybe you are looking for
-
When I open a document and choose a Save As command, how can I do to the application open automatically the same directory that the original file is saved? If I have to Save As several documents in a directory with different names, it's a tedious tas
-
How can we use same material code for two different sales area
Hello friendsu2026 Hope you all doing well I am facing a problem and I will be thankful to all of you, for your suggestions Issue: I have a *material created in 3000/10/19 for domestic purpose *,now our company has decided to export it for that we ha
-
Lost 500mb of space after syncing ipod touch 4g
hello guys. i synced my ipod touch 4g yesterday to remove a single photo. my ipod has no songs, videos or anything else. after syncing, i was notified that i have a little space left (the one which asks you to go to settings or something, i forgot.)
-
ITunes 6.0.3 Won't Open!
I have just installed iTunes 6.0.3 and it won't open when I try to open it. I tried plugging my iPod in to see if that would open it but it wouldn't. It isn't a problem with privileges becuase I am my system administrator and it isn't firewall proble
-
i dont know what to do. will post the image here. https://picasaweb.google.com/107684221777898384480/October232012#5802413257442186338