I could not print a receipt from an e mail. The only part that would print was the heading. How do I print a receipt from e mail?

I could not print a receipt from an e mail. Only the header of the e mail would print. How can I print the entire receipt?

Try Mail/File/Export as PDF, open it in Preview, and see if you can print it from there.

Similar Messages

Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7. Do you think this is the reason why my iPad cannot find my wireless printer?

Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7. Do you think this is the reason why my iPad cannot find my wireless printer?

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

Hi, one day my music on itunes sounds great...the next the only songs that sound normal are the ones that were uploaded from a cd...the others all sound brassy...why? anyhelp out there would be great. thanks.

One day music on itunes sounds great, the next the only songs that sound normal are the ones loaded from a cd, the others sound brassy. Nothing was changed just normal apple updates.

one last thing: I'm also getting this problem here too:
https://discussions.apple.com/thread/5324398?start=15&tstart=0

HT1535 Transfered my music and video library from my laptop to my PC. Syncing my PC to my IPOD classic and my IPAD without incident. But when I try to sync my IPOD Touch to my PC, the only thing that will sync is the music I purchased. Help!

Transfered my music & video library from my laptop to my PC. Syncing my ipod classic and my ipad without incident to the PC. But when I try to sync my ipod touch, the only thing that will sync is music that I have purchased on that PC. Any ideas?

where on my computer am I suppose to make the individual picture files and have them to upload on my ipod touch.... I do have a photo library on my computer, but in the photo tab in itunes for the ipod touch and there is nothing checked for syncing, cause when I do check it it always says its going to replace everything i have in my photo library on my ipod touch..... So how am i suppose to have it checked and have it NOT replace pictures on it????
Also I cannot make more photo albums into my ipod touch, it just replaces the one album every time....
I am very frustrated cause I have tried the manuals and the apple support help etc and nothing pertains to my exact issue.....
Please if u could elaberate I would appreciate it alot.....
thank u

Every time I try and delete an album from my ipod using itunes but doing so manually as was suggested, it is also deleted from the itunes library that i have set up. How do I just delete albums from my ipod and not loose them from my pc itunes library?

I have an extensive itunes library on my pc. I want to delete albums from my ipod but still keep them in my itunes library. Everytime I try to delete by right clicking on the album and choosing delete, I also loose the album from itunes. I have just gotten an old iphone and put just classical and jazz on the iphone and want to delete those albums from my ipod but alas I will be loosing them from the iphone as well as soon as I sync with itunes in the future. I put settings into manual manage music but still the albums go off itunes. Any suggestions?

I'm thinking you sync to your computer over Wi-Fi, if correct, switch to sync when connected to iTunes, turn off sync over Wi-Fi. Hope this helps, Good luck. Cheers.

I cannot get ipod to start, Logo for power is the only one that appears but it will not recharge either by using pC or dock. I have used two different connecting wires but no difference in response

I cannot get Ipod to start. The only logo that comes up is the power needed but in spite of connecting the ipod to PC and using two different connection leads the ipod does not respond. I also tried to power it using a i station 7 but no difference. I tried all the usual pressing of both menu and play buttons. Is it fixable?

Thanks for your tip. I tried leaving the ipod in the I -Station 7 overnight and then reconnected it to my PC> It asked if i wanted to reset to factory settings. I did this and then the Apple logo came back on .After that a very sad looking logo of an ipod came on with www.apple.com/support/ipod underneath. I feel that either burial or cremation is my option now for this old ipod.

Hi , I would like to ask you about purchase item transfer to ipad from mac book Itunes, But This message will be notified on screen this ipad could not be synced because this computer is no longer authorized with that purchased item on this ipad.

Hi ,
I would like to ask you about purchase item transfer to ipad from mac book Itunes, But This message will be notified on screen
"This ipad could not be synced because this computer is no longer authorized with that purchased item on this ipad"
I did authorized in the store, but still did not transfer to the mac. Could you please to tell me what should I do it? Please let me know that as soon as possible.
Regards,
Thank you

The iPad is fine. But the computer you're syncing with needs to be authorised with the Apple ID that was used to buy the material on the iPad. You do this by picking the 'Authorize' item from the menu in iTunes and entering the account name and password.

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
===========================================================
This is a SQL Server 2012 Developer Edition of SSRS.
I am getting this error when navigating to http://servername/Reports. The reports site was working fine, until I installed a SQL 2014 Developer instance (including SSRS) on the same server.
I can still get to the http://servername/ReportServer site.
Neither of these are using Sharepoint.
Any help resolving this issue would be greatly appreciated.
Below is the stack trace.
===========================================================
[FileLoadException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Reflection.Assembly._nLoad(AssemblyName
fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0 System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Boolean forIntrospection) +416 System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +166 System.Reflection.Assembly.Load(String
assemblyString) +35 System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +190 [ConfigurationErrorsException: Could not load file or assembly 'Microsoft.ReportingServices.SharePoint.ObjectModel'
or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)] System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +1149
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +323 System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +116 System.Web.Configuration.AssemblyInfo.get_AssemblyInternal() +36 System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection
compConfig) +212 System.Web.Compilation.WebDirectoryBatchCompiler..ctor(VirtualDirectory vdir) +174 System.Web.Compilation.BuildManager.BatchCompileWebDirectoryInternal(VirtualDirectory vdir, Boolean ignoreErrors) +57 System.Web.Compilation.BuildManager.CompileWebFile(VirtualPath
virtualPath) +295 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +482 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext
context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile) +108 System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean
noAssert) +171 System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp, Boolean noAssert) +52 System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext
context, String requestType, VirtualPath virtualPath, String physicalPath) +53 System.Web.HttpApplication.MapHttpHandler(HttpContext context, String requestType, VirtualPath path, String pathTranslated, Boolean useAppConfig) +519 System.Web.MapHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+176 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +274
===========================================================

Hi Glen，
"The located assembly's manifest definition does not match the assembly reference." is generally caused by the loaded assembly's version is different than the expected version application refers to.
In this case, it should be caused by:
While starting Report Manager, the backend process ReportingServiceService need to load assemblies it refers to
ReportingServiceService reads the compilation/assemblies element from web.config(under Report Manager virtual patch)
If the compilation/assemblies is not existing, ReportingServiceService loads all assemblies from Bin folder. It can be verified from call stack System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory(). ReportingServiceService
uses System.Reflection.Assembly.Load with the assemblies' name only to load assemblies.
The Assembly.Load tries to load from the specify assembly by name from GAC at first. If it is found from GAC, it won't be loaded from Bin folder any more.
Since Reporting Service SharePoint Integration mode is installed, a same assembly of 'Microsoft.ReportingServices.SharePoint.ObjectModel' with different version might be installed to the GAC. That causes the error "The located assembly's manifest definition
does not match the assembly reference."
For more information about the error message and the loading process, please see:
http://blogs.msdn.com/b/junfeng/archive/2004/03/25/95826.aspx
https://msdn.microsoft.com/en-us/library/yx7xezcf(v=vs.100).aspx
Thanks,
Jinchun Chen

Could not load file or assembly 'Microsoft.QualityTools.Testing.Fakes' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))

hi
what the cause of this error?
Could not load file or assembly 'Microsoft.QualityTools.Testing.Fakes' or one of its dependencies. The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))

Hi,
Please try below methods:
1.remove all references ending with .FAKES (including the Microsoft.QualityTools.Testing.Fakes.dll reference).
2.removed the FAKES folder
3.Cleaned solution
4.Then readded all references back in.
Here are some similar threads,you could refer to :
http://stackoverflow.com/questions/26934260/ms-fakes-unit-tests-failing-after-visual-studio-2013-update-4
http://stackoverflow.com/questions/18337736/add-fakes-assembly-option-missing
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help with Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.

This was all working yesterday, but this morning, I cannot run in the dev fabric, or even setting the website project as a startup project directly, I get the following error:
Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'msshrtmi' could not be loaded.
=== Pre-bind state information ===
LOG: User = Andrew-VAIO\Andrew
LOG: DisplayName = msshrtmi
(Partial)
WRN: Partial binding information was supplied for an assembly:
WRN: Assembly Name: msshrtmi | Domain ID: 3
WRN: A partial bind occurs when only part of the assembly display name is provided.
WRN: This might result in the binder loading an incorrect assembly.
WRN: It is recommended to provide a fully specified textual identity for the assembly,
WRN: that consists of the simple name, version, culture, and public key token.
WRN: See whitepaper http://go.microsoft.com/fwlink/?LinkId=109270 for more information and common solutions to this issue.
LOG: Appbase = file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/
LOG: Initial PrivatePath = C:\Users\Andrew\Desktop\Beko2011Azure\Website\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\Users\Andrew\Desktop\Beko2011Azure\Website\web.config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Policy not being applied to reference at this time (private, custom, partial, or location-based assembly bind).
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/Temporary ASP.NET Files/root/cb955b02/eef106e2/msshrtmi/msshrtmi.DLL.
LOG: Attempting download of new URL file:///C:/Users/Andrew/Desktop/Beko2011Azure/Website/bin/msshrtmi.DLL.
ERR: Failed to complete setup of assembly (hr = 0x8007000b). Probing terminated.
Stack Trace:
[BadImageFormatException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +0
System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) +39
System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) +132
System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +144
System.Reflection.Assembly.Load(String assemblyString) +28
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +46
[ConfigurationErrorsException: Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +618
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +209
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +130
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +178
System.Web.Compilation.BuildManager.GetPreStartInitMethodsFromReferencedAssemblies() +94
System.Web.Compilation.BuildManager.CallPreStartInitMethods() +332
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +677
[HttpException (0x80004005): Could not load file or assembly 'msshrtmi' or one of its dependencies. An attempt was made to load a program with an incorrect format.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +9079228
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +97
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +258
Note that the dev machine is x64 Win7.
I have not tried deploying this to staging since the issue started as I'm a bit nervous of touching the staging/live environment until this is solved.
Removing the PlatformTarget element from the project file has no effect
Removing the msshrtmi.dll file from the bin directory of the website project ends up with
'Could not load file or assembly 'Microsoft.WindowsFabric.Common, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified'
I have used Git to revert to the last working build to no effect (But I don't have the obj/bin folders in GIT), but it has atleast reset the project files etc.
If I return msshrtmi.dll to the bin folder and switch the model and website projects to x64 there is no change
If I switch both to x86 then I get an error Could not load file or assembly 'BekoModel2011' or one of its dependencies. An attempt was made to load a program with an incorrect format.
which is the model project - presumably because to run on my x64 machine I need the 64bit version?
I really need to be able to debug and then publish some changes ASAP.
Andrew

Hi,
Is it true that you're using IIS to host the application? Could you check whether the process is x64 or x86 one via task manager or config in IIS manager?
http://blogs.msdn.com/b/rakkimk/archive/2007/11/03/iis7-running-32-bit-and-64-bit-asp-net-versions-at-the-same-time-on-different-worker-processes.aspx
Allen Chen [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694
You also may have to place the iPod in recovery mode. For how see:
iPhone and iPod touch: Unable to update or restore

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

False message: The document name you requested (/selector_test.html) could not be found on this server. However, we found documents with names similar to the one you requested.

When I specify http://www.celticmanner.com/selector_test.html to Firefox 6.01, I get the false message:
Multiple Choices
The document name you requested (/selector_test.html) could not be found on this server. However, we found documents with names similar to the one you requested.
Available documents:
/selector_test.txt (common basename)
The file http://www.celticmanner.com/selector_test.html IS PRESENT on the host.
The file http://www.celticmanner.com/selector_test.txt IS NOT. (It had been earlier.)
I do not find the text "selector_test.txt" anywhere on my partition C! Where does Firefox retain a pointer to this file that no longer exists? And why?
NB: The text "could not be found on this server" is sloppy. That message is not issued from a servcer, but from the instance of Firefox on my computer. The message should read "could not be found on the specified server".
B. Somers

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

HT1338 I am having trouble installing updates on my mac this is the error code the pops upThe update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that

can some one help me? I have been trying to update my MAC and it will not download because this message come up
(The update could not be verified. It may have been corrupted or tampered with during downloading. The update will be downloaded and checked again the next time that Software Update runs.)

For anyone that comes across this. I managed to fix the problem. It had something to do with the date on my computer. Mavericks installer apparently does a date check of some sort and that is where the error is coming from. Open terminal and check the system date. It may be wrong. Another poster in the forums told me how to to check the date and change it. Click here for the link to the explanation. Be careful because the date is in a weird format.

Could not open key: UNKNOWN\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceList\Media. Verify that you have sufficient access to that key, or contact your support personnel.

Hi guys !
My problem is in installation/uninstallation of iTunes:
Could not open key:
UNKNOWN\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceList\Media. Verify that you have sufficient access to that key, or contact your support personnel.
The error appear first time in installation iTunes 10.3.1.55.
The error repeat in QuickTime, Bonjour, Apple Mobile Device Support, Apple Software Update, just changing the green area.
How i fix this ?
Thanks.
PS: Im administrator.

Start>Run put regedit and press Ok.
1. Go to the key: HKEY_CLASSES_ROOT\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceLis t\Media
2. Right click in Media folder, select Permissions from the menu.
3. You will see that is no user, on the "Permissions for..." dialog box which appears next, press the "Add.." button and add in the "All"
4. Back on the first "Permissions for..." dialog box, click on each account in the top-list and make sure each has the "Full Control = Allow" and "Read = Allow" permissions
5. Click the "Advanced" button and the "Advanced Security Settings" dialog box appears
6. On the "Permissions tab" enable the checkmark box named "Replace all child object permissions with inheritable permissions from this object", then press the "Apply" button
7. On the "Owner" tab, highlight the "Administrators" name in the lower listbox, enable the checkmark box called "Replace owner on subcontainers and objects" and press the "Apply Button"
In my case, many errors appear before, but i fixing 1 by 1 and installation completed. Try and tell me later.

I could not print a receipt from an e mail. The only part that would print was the heading. How do I print a receipt from e mail?

Similar Messages

Maybe you are looking for