I could not read websites in tamil language(unicode)

When I try to read websites in tamil language example: http://ta.wikipedia.org , i see only boxes.
I use HTC Desire HD using Android 2.2
Android natively doesnt support tamil & dont have tamil font in it. I have rooted my phone and have tamil fonts copied.
I should be able to set default font to tamil font (example Lohit-tamil which I have in the system) to view tamil web pages.

hey guys....
follow these steps to read websites in tamil.
1) Download & Install Opera Mini
2) Type in your address bar: opera:config (without www.)
3) A settings will come, go to last option " Use bitmap fonts for complex scripts" select and save the settings.
Now u will be able to read Tamil Unicode Things...

Similar Messages

ERROR:Could not read archive file - during Processing Base System Part 2

Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!

Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b

Could not read from the source. Please check if it has moved or been deleted

hi all,
when i try to render a afx project from media encoder i get the following message
"Could not read from the source. Please check if it has moved or been deleted"
i've read on the forum that this is due to an old installation of Premiere.
I'm using a brand new computer. the only software installed is my cs5 master collection and the updates from adobe website.
win7 pro
i7
16 gig ram
cheers
s

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
Steps to reproduce bug:
1. i export anything by button "queue" from premiere to Encoder
2. Encoder will start encoding
3. Encoder does not show the window of media encoding (down left )
Results: sound of sheep occur,
in encoding error file is this reason of canceling the encoding :
01/02/2014 10:10:48 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Could not read any NLS message catalogue! while applying patch

Hey,
I am posting on behalf of someone.
We are trying to install an Oracle patch (the patch p3948480_9206_AIX64-5L) on AIX 5.3.
We get the error Message:
ERROR: Could not read any NLS message catalogue!
I have checked the Paths and install additional language packs to match the install of another machine we have the Oracle path installed on which hasnt helped.
the NLSPATH leads to directories which are correct.
Is it critical that the LANG environment variable be "C" ?
Thanks in advance
Derek

Oracle Universal Installer needs some files in the directory where the runInstaller (UNIX) or setup.exe (Windows) is running. So, when you invoke runInstaller (UNIX) or setup.exe (Windows), you should invoke it from the directory where this command is present, or you must specify the complete path.
~ Madrid.

Could not read boot block (input/output errror) powerbook g4

Hello
My friend gave me a powerbook g4 and a copy of osx lion, I would like to install it but the internal hardive is not available within the "select Destination" area of the installation process. I tried to repair the disk which is labelled Disk0s1, but shortly after it is underway i recieve this message.
**/dev/disk0s1 could not read boot block (input/output error) Error: The underlying task reported failure on exit. 1 non HFS volume checked, 1 volume could not be repaired because of an error.
Within disk utilities the Disk01s is grey, I can try to repair it but the above error occurs. Do you know what the problem is and how I can fix it?

Since you are going to install system fresh, it sounds like, you should erase the drive. Boot from the installer disc, then select the language but do not start the installer. From the menu bar, you should have either an Applications or an Installer menu. From one of the menus, you can then start Disk Utility.
From the drives and volumes pane, select the internal drive hardware listing.
This will now allow you to partition or erase the disc. Now click the Erase tab and select Mac OS Extended (Journaled) as the format and then click the "Erase" button. You can name the volume that will actually be created, like for instance "MacintoshHD" or whatever you want.)
Once the erase has completed, you need to check the information for the hard drive at the bottom of the window. Be sure that the partition scheme is Apple Partition Map. If for some reason it is something else, like GUID, you won't be able to install MacOS on it. You will need to click the Partition tab, click the "Options..." button and select Apple Partition Map, then click the "Partition" button.
Once this is done, then you can quit Disk Utility and you should be able to install Tiger on that HD.

Contribute could not read the shared settings file.....

We are using Contribute 4 via FTP connection. Suddenly, I
have one user today that is getting the following error when trying
to connect to things she should have access to.
The error: "Contribute could not read the shared settings
file for this Website because the file has been corrupted. To
re-create the shared settings file, an administrator must
administrate the website again."
As a sidenote, this user had recently been sent approximately
41 files for review, I have no idea if there is a connection or
not. This feature has worked fine for them before.
Anyone see this problem before? I did check and I have other
users that can access and edit the Website just fine. It seems
specific to this one user.
Thanks - Lainie

I think this has something to do with the PNG plugin.

Cisco SA 520 "Could not read headers"

Hello
We've recently purchased an SA 520 and have problems with a few websites as the Cisco device returns an error:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The server is down.
Could not read headers
Has anyone else experienced this problem? The websites in question are all working and worked for us on our previous system. Additionally, this is definitely the SA reporting the error.

Anybody else beside me having this problem? I have three SA520's installed in three different offices, and they are all doing the same thing. If I turn on Protectlink URL filtering, the customer will constantly, but intermittently complain about various website, even sites I have specifically listed in the over-ride list, will generate this error. They get the blue Cisco SA520 page stating either "Could not read headers" or "server is down". If they hit refresh a few times, the page will come up. This is happening with several users at each site. Some on XP, some on Win7. Some IE6, some IE7, some IE8. The only way to have the errors go away is to turn off Protectlink URL filtering, then all works fine. Of coarse, then they are running unprotected.
I have been using Protectlinlk on the RV042 and RV082 at several other customer's sites with great sucess for some time now, but the SA520 obviously has bugs with this. I have had this problem now with both the 1142 and 1165 firmware. I hope to GOD Cisco is able to fix these bugs soon. At this point, I have the Protectlink turned off in the hopes Cisco will release a firmware fix soon.
Come on Cisco, FIX THIS!!!

Mplayer-34426: libX11.so.6: could not read symbols: Invalid operation

After long job I get
/usr/bin/ld: libvo/vo_xv.o: undefined reference to symbol 'XGetWindowAttributes'
/usr/bin/ld: note: 'XGetWindowAttributes' is defined in DSO /usr/lib/libX11.so.6 so try adding it to the linker command line
/usr/lib/libX11.so.6: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
make: *** [mplayer] Error 1
==> ERROR: A failure occurred in build().
Aborting...
if it's useful, the PKGBUILD is
# $Id: PKGBUILD 144946 2011-12-11 15:27:00Z ibiru $
# Maintainer : Ionut Biru <[email protected]>
# Contributor: Hugo Doria <[email protected]>
pkgbase=mplayer
pkgname=('mplayer' 'mencoder')
pkgver=34426
pkgrel=1
arch=('i686' 'x86_64')
makedepends=('lame' 'libtheora' 'xvidcore' 'x264' 'faac' 'faad2' 'opencore-amr' 'a52dec' 'libpulse' 'unzip' 'git' 'fontconfig' 'yasm')
license=('GPL')
url="http://www.mplayerhq.hu/"
options=(!buildflags !emptydirs)
source=(ftp://ftp.archlinux.org/other/${pkgname}/${pkgname}-${pkgver}.tar.xz mplayer.desktop)
md5sums=('ff81117293e76b59e54debc439d8e612'
'c0d6ef795cf6de48e3b87ff7c23f0319')
build() {
cd ${srcdir}/${pkgname}
./configure --prefix=/usr \
--enable-runtime-cpudetection \
--disable-gui \
--language=en_US \
--confdir=/etc/mplayer \
--disable-mencoder \
--disable-termcap \
--disable-termios \
--disable-lirc \
--disable-lircc \
--disable-apple-remote \
--disable-apple-ir \
--disable-radio-v4l2 \
--disable-radio-bsdbt848 \
--disable-tv \
--disable-tv-v4l1 \
--disable-tv-v4l2 \
--disable-tv-bsdbt848 \
--disable-pvr \
--disable-rtc \
--disable-winsock2_h \
--disable-smb \
--disable-live \
--disable-nemesi \
--disable-librtmp \
--disable-bluray \
--disable-menu \
--disable-sortsub \
--disable-fribidi \
--disable-enca \
--disable-maemo \
--disable-macosx-finder \
--disable-macosx-bundle \
--disable-vstream \
--disable-w32threads \
--disable-ass-internal \
--disable-ass \
--disable-rpath \
--disable-gif \
--disable-png \
--disable-mng \
--disable-jpeg \
--disable-libcdio \
--disable-liblzo \
--disable-win32dll \
--disable-qtx \
--disable-xanim \
--disable-real \
--disable-libdirac-lavc \
--disable-libschroedinger-lavc \
--disable-libnut \
--disable-vf-lavfi \
--disable-tremor-internal \
--disable-tremor-low \
--disable-tremor \
--disable-speex \
--disable-libgsm \
--disable-ladspa \
--disable-libbs2b \
--disable-libdv \
--disable-mpg123 \
--disable-mad \
--disable-libdca \
--disable-mp3lib \
--disable-musepack \
--disable-vidix \
--disable-vidix-pcidb \
--disable-dhahelper \
--disable-svgalib_helper \
--disable-matrixview \
--disable-dga2 \
--disable-dga1 \
--disable-vesa \
--disable-svga \
--disable-sdl \
--disable-kva \
--disable-aa \
--disable-caca \
--disable-ggi \
--disable-ggiwmh \
--disable-direct3d \
--disable-directx \
--disable-dxr2 \
--disable-dxr3 \
--disable-ivtv \
--disable-v4l2 \
--disable-dvb \
--disable-mga \
--disable-xmga \
--enable-xv \
--enable-xvmc \
--disable-vdpau \
--disable-vm \
--disable-xinerama \
--disable-x11 \
--disable-xshape \
--disable-fbdev \
--disable-mlib \
--disable-3dfx \
--disable-tdfxfb \
--disable-s3fb \
--disable-wii \
--disable-directfb \
--disable-zr \
--disable-bl \
--disable-tdfxvid \
--disable-xvr100 \
--disable-tga \
--disable-pnm \
--disable-md5sum \
--disable-yuv4mpeg \
--disable-corevideo \
--disable-quartz \
--disable-ossaudio \
--disable-arts \
--disable-esd \
--disable-jack \
--disable-openal \
--disable-nas \
--disable-sgiaudio \
--disable-sunaudio \
--disable-kai \
--disable-dart \
--disable-win32waveout \
--disable-coreaudio \
--disable-select \
--charset=UTF-8
[ "$CARCH" = "i686" ] && sed 's|-march=i486|-march=i686|g' -i config.mak
make
package_mplayer() {
pkgdesc="A movie player for linux"
install=mplayer.install
backup=('etc/mplayer/codecs.conf' 'etc/mplayer/input.conf')
depends=('desktop-file-utils' 'ttf-dejavu' 'enca' 'libxss' 'a52dec' 'libvpx' 'lirc-utils' 'x264' 'libmng' 'libdca' 'aalib' 'lame' 'fontconfig' 'libgl'
'libxinerama' 'libvdpau' 'libpulse' 'smbclient' 'xvidcore' 'opencore-amr' 'jack' 'cdparanoia' 'libmad' 'sdl' 'libtheora' 'libcaca' 'libxxf86dga' 'fribidi'
'libjpeg' 'faac' 'faad2' 'libxvmc' 'schroedinger' 'mpg123' 'libass' 'libxxf86vm' 'libbluray')
cd ${srcdir}/${pkgbase}
make DESTDIR=${pkgdir} install-mplayer install-mplayer-man
install -Dm644 etc/{codecs.conf,input.conf,example.conf} ${pkgdir}/etc/mplayer/
install -dm755 ${pkgdir}/usr/share/mplayer/
ln -s /usr/share/fonts/TTF/DejaVuSans.ttf ${pkgdir}/usr/share/mplayer/subfont.ttf
rm -rf ${pkgdir}/usr/share/mplayer/font
#desktop file FS#14770
install -Dm644 ${srcdir}/mplayer.desktop ${pkgdir}/usr/share/applications/mplayer.desktop
install -Dm644 etc/mplayer.png ${pkgdir}/usr/share/pixmaps/mplayer.png
#oops, forgot to remove this, but it does not seem to be a problem
package_mencoder() {
pkgdesc="Free command line video decoding, encoding and filtering tool"
depends=('enca' 'a52dec' 'libvpx' 'x264' 'libmng' 'libdca' 'bzip2' 'lame' 'alsa-lib' 'fontconfig' 'giflib' 'libpng' 'smbclient' 'xvidcore' 'opencore-amr' 'cdparanoia'
'libmad' 'libtheora' 'fribidi' 'libjpeg' 'faac' 'faad2' 'schroedinger' 'mpg123' 'libass' 'libbluray')
cd ${srcdir}/${pkgbase}
make DESTDIR=${pkgdir} install-mencoder install-mencoder-man
find $pkgdir/usr/share/man -name 'mplayer.1' -exec bash -c 'mv "$1" "${1/mplayer/mencoder}"' _ {} \;
Last edited by Doctor Drive (2011-12-20 16:32:10)

May be related to this: https://fedoraproject.org/wiki/Understa … LinkChange

Adobe Media Encoder for CS4 error Could not read from the source

Hello,
I get an error when I try to export from Premiere CS4. It doesn't matter how I export. Seems like an easy fix, but I can't figure it out. Any help is appreciated:
- Source File: C:\DOCUME~1\ARTWHI~1\LOCALS~1\Temp\extra and b roll.prproj
- Output File: E:\Living Accused Movie Transfers\video\Cindy at table.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 16:10:34
1/21/2009 9:50:25 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been
deleted.
Thank you
Art

When you attempt to encode media with Adobe Media Encoder CS4 on Windows, the following error message appears in the text file (AMEEncodingErrorLog.txt) that opens when you click the error icon: "Encoding Failed. Could not read from the source. Please check if it has moved or been deleted."
If it's that correct, you removed an earlier version of Adobe Premiere Pro or Adobe Creative Suite on the same computer.
Do one or both of the following solutions:
Solution 1: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:\Program Files\Common Files\Adobe\dynamiclink.
Close all Adobe applications.
In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
Rename the newly created shortcut to just Premiere.
Important: The name of the shortcut must be exactly Premiere with no other characters.
Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
Move the Premiere shortcut that you created into the dynamiclink folder.
Solution 2: Remove and reinstall all Premiere Pro CS4 components or all Adobe Creative Suite 4 components.
Do one of the following:
Windows XP: Choose Start > Control Panel > Add or Remove Programs.
Windows Vista: Choose Start > Control Panel > Programs and Features.
In the list of installed programs, select Adobe Premiere Pro CS4, Adobe Creative Suite 4 Production Premium, or Adobe Creative Suite 4 Master Collection.
Click Change/Remove (Windows XP) or Uninstall (Windows Vista).
Follow the on-screen instructions to remove all components of Premiere Pro CS4 (including Adobe Encore CS4 and Adobe OnLocation CS4) or to remove all components of your edition of Adobe Creative Suite 4.
Re-install your Adobe software.

VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
Hello All,
I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues.
Any suggestions on the issue i am facing
error is :
could not read result repository: unknown transaction id in results:
or
could not read result repository: unknown request id in results:
Thanks
Satish

Hi Kotapati,
>>Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
If possible, I suggest you could share me simple load test for us so that we will further help you.
You could upload your load test to OneDrive and then copy link here.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Media Encoder crash in CS6. Could not read from the source. Check if it has moved or been deleted.

I'm having a problem getting Media Encoder to get past the dynamic link portion of encoding a time line sequence.
I can send it over to Media Encoder, but it crashes consistently after the yellow bar saying something about dynamic link.
I have CS6 installed in my computer here at work, it previously had CS5.5 installed on it.
I read some answers about CS4 having this problem and tried to create a shortcut and put it in the dynamic link folder, but that didnt work.
I would hate to have to reinstall the software here at work as the IT department is a pain- but I can't encode video on one of the computers we use here.
Any ideas on what may be happening and how I can solve the problem?
Thanks!
Its a Dell Workstation with Windows 7 Ultimate installed dualE5620 processors at 2.4GHz. .
only 6 GB RAM, and a RAID 5 hard drive setup with 3- one gb drives giving the C drive space of 1.8Gigs
Its got an NVIDIA Quadro NVS 420 video card.
I'm upgrading this computer to better work with editing video, so this is a good time to get this all cleaned up.
Im adding RAM (24GBs)- replacing the video card to a GTX 780 3GB running 3 monitors.
I'd also like to either split up the RAID (ugh)..or just add 2 internal SAS HDDs. to split up the video and the cache and the OS/programs as is usually done with editing video.
Thanks for your help in advance...
Mike

...more information...problem still not solved....
After searching more in the forums, I tried a couple more things:
I tried to restart AME and clearing the preferences. This didnt help.
I also deleted the ...appData/Roaming/Adobe/AdobeMediaEncoder/6.0 folder and all subfolders No help here either.
I also tried to import the sequence via AME rather than export via PP. This worked. The sequence loaded immediately and processed perfectly.
When I export via PP, I hit the queue button, it hangs for about 3 mins, then the yellow bar appears saying "Connecting to Dynamic Link server"
it then hangs for approx 3 mins again and then I get the Failed alert.
the error log reports:
Encoding failed
Could not read from source. Please check if it has moved or been deleted.
any help available here????

Error: Could not read Header Mapping in Receiver Agreement

Dear SAP experts,
Newly installed SAP G7A PI 7.1(Acceptance box) was already released to customer.
We are doing an initial test (BAT phase), wherein, our end-to-end scenario is, from a EP Portal application ---> G7A PI 7.1 --> Trading Partner via AS2 protocol.
G7A PI is connected to Trading Partner via AS2 protocol.
Currently, our EP Portal application is in-active at the moment, that's why we used 'manual XI submitter', to send a message from G7A PI itself going to Trading Partner.
The message was success in the Integration engine of G7A PI, and the output message was produced.
As the message reached the Adapter Engine layer of G7A PI, we encountered a specific error,
Delivering the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: com.seeburger.xi.connector.queue.TaskBuildException: Could not create CPAObjectMapper: InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement: while trying to invoke the method com.sap.aii.af.service.cpa.Party.getParty() of an object returned from com.sap.aii.af.service.cpa.NormalizationManager.getXIParty(java.lang.String, java.lang.String, java.lang.String), Could not create CPAObjectMapper: InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement: while trying to invoke the method com.sap.aii.af.service.cpa.Party.getParty() of an object returned from com.sap.aii.af.service.cpa.NormalizationManager.getXIParty(java.lang.String, java.lang.String, java.lang.String)
Basically, "Could not create CPAObjectMapper - InvocationTargetException caused by Could not read Header Mapping in Receiver Agreement"
I am thinking, one of the possible cause is that we used manual XI submitter, in G7A PI, instead of the utilizing the actual Sending system (EP Portal application).
Or possible cause is that the AS2 adapter in G7A is not yet stable, thus causing the issue.
We've already done successful connection when we're in GDD PI (Development box) during our SIT phase.
Objects in G7A were mirror of GDD PI.
Kindly advise for your inputs.
Thanks!
Gerberto

Hi,
It seems that the cause of the error is the unstable performance of the PI box, since, this was newly installed and there were patches that were not yet added.
Thanks for the support!
Gerberto

Could not read the profile path for user S-1-5-21-1272265863-3531003469-187

hi
I was doing the installation of the crm702 on MAXDB+WINDOWS.IN THE FIRST PHASE OF EXECUTION(CREATE USERS FOR SAP SYSTEM) I GOT THE ERROR MENTIONED BELOW.CAN SOMEONE HELPE ME :
An error occurred while processing option Enhancement Package 2 for SAP CRM 7.0 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step: Could not read the profile path for user S-1-5-21-1272265863-3531003469-18741865-1021 from the registry: The system cannot find the file specified. .). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:/crmfeb.

Hi,
Delete all keys in registry (regedit) with: S-1-5-21-1272265863-3531003469-18741865-1021. You can do it by find it - F3.
After that restart sapinst.
Regards.

Problem: 'Could not read from source' when exporting project.

Hi everybody
I am using Adobe Premiere CS4 on my MacBook Pro 15'' (i5 processor, 4 GB RAM, 500 GB Harddisc, 256 MB video memory (high-clockspeed))
Everything works well except of one big thing, every time when i try to export my finished project the Media Encoder tells me always the same thing directly after pushing the start button. 'Could not read from the sorce. Please check if it has been removed or deleted'.
I tried removing any offending plugins, i fixed the disk permissions.. But it all doesnt matter anything.
No matter what i try to export, no matter in what file format. It just doesnt work. I even tried exporting a project which only contains a video file of 5 seconds without anything more but it just doesnt work. Its impossible that i have touched or modified or replaced any source files...
Some help would be very very appreciated!!
Martijn

Welcome to the forum.
Perhaps this Adobe KB Article will be able to help you.
Good luck,
Hunt

"ERROR: Could not read block 64439 of relation 1663/16385/16658: Result too large"

Hi,
I've already archived a lot of assets in my final cut server but since one week there is a message appearing when I click on an asset and choose "Archive". The pop-up says: "ERROR: Could not read block 64439 of relation 1663/16385/16658: Result too large"
Does anyone know what's the problem and/or have any suggestions to solve my problem?! I can't archive anymore since the first appearance of this message.
What happened before?
-> I archived some assets via FCS and then transfered the original media to an offline storage media. That system worked fine for the last months and my normal server stays quit small in storage use. But now, after I added some more new productions and let FCS generate the assets, it doesn't work anymore...
It's not about the file size - I tried even the smallest file I found in some productions.
It's not a particular production - I tried some different productions.
It's not about the storage - there's a lot of storage left on my server.
So, if someone knows how get this server back on the road - let me know.
THNX!
Chris

I would really appreciate some advice re: recent FCS search errors.
We're having similar issues to C.P.CGN's 2 year old post, it's only developed for us in the last few weeks.
Our FCS machine is running 10.6.8 mac os and 1.5.2 final cut server with the latest
OS 10.6.x updates.
FCS is still usable for 6 of 8 offliners, but on some machines, searching assets presents "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."
Assuming the OS and/or data drives on the FCS machine were failing, I cloned the database drive today and will clone the OS drive tomorrow night, but after searching the forums and seeing similar error messages I'm not so sure.
FCS has been running fine for last 4 years, minus the recent Java security issues.
Thanks in advance, any ideas appreciated!
cheers,
Aaron Mooney,
Post Production Supervisor.
Electric Playground Daily, Reviews On The Run Daily, Greedy Docs.
epn.tv

I could not read websites in tamil language(unicode)

Similar Messages

Maybe you are looking for