I could not see my widgets on my dashboard

i installed a couple of widgets on my dashboard, a couple of defaults and some i downloaded from the apple widget page, they were fine (i could see them) the first time i installed them and then I put my iMac to sleep...when I went back to do some more work...my widgets that i just installed and kept would not appear anymore. i used the mighty mouse and the dashboard icon on the dock to access my widgets but they would not appear at all. I restarted the iMac thinking it would come back but it didnt. When I tried adding more widgets just to test it, by dragging the widgets to the dashboard, it would not add. I could not find an article that could help me, maybe there is someone out there who can. thanks...

I found some additional information from apple and other users. Appears that this is a bug with Leopard. Until a fix is available, what you need to do is disable "fast switching" between users. Then disable any parental controls on an account. Then you can go back and activate parental controls.
Seemed to work for me.
Good luck

Similar Messages

  • Could not see the data in the cube

    Hi all,
    Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
    I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new)  which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
    Can anyone plz help me out.
    Thanks in advance.
    Thanks,
    Preethi.

    Hi Balu,
    I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
    I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
    Hope its clear.
    Thanks,
    Preethi.

  • Inline item mx:Image ... in mx:itemRenderer could not see the defination of method

    I have following code and got a compilation error ("possiblely called an undefined function") because the <mx:Image ...> in the <mx:itemRenderer > could not see the defination of "aMethod" method:
    <mx:Form ....>
    <mx:Script><![CDATA[
    private function aMethod(evt:Event):void {
               // code...
    ]]></mx:Script>
    <mx:Canvas label="Tile View" width="100%" height="100%" >
              <mx:TileList id="photosTileList" dataProvider="{this.photoDP}" width="100%" height="100%"  >
                        <mx:itemRenderer >
                            <mx:Component>
                                <mx:Image horizontalAlign="center" source="{data.url.text()}"
                                    toolTip="{data.caption.text()}" width="55" height="38" complete="aMethod(event)"/>  <!-- It causes the error -->
                            </mx:Component>
                        </mx:itemRenderer>
             </mx:TileList>
             <mx:Image .... complete="aMethod(event)"/>  <!-- It is OK here -->
    </mx:Canvas>
    </mx:Form>
    I do not know why the inline <mx:Image> inside <mx:itemRenderer> can not see the "aMethod" function defination in the same mxml file.
    Any suggestions?

    You need outerDocument, and the method cannot be private, it should be public:
    complete="outerDocument.aMethod(event)"
    If this post answers your question or helps, please mark it as such.
    Greg Lafrance - Flex 2 and 3 ACE certified
    www.ChikaraDev.com
    Flex / AIR Development, Training, and Support Services

  • My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

    Hello Friends,
    I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
    1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
    2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
    (I'm using windows 7)
    Friends, Please help me with the above problems. It will be a great help.
    Thank You.
    R.SAMALA

    Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
    http://www.apple.com/support/ipod/service/prices/
    B-rock

  • I could not see photos after updated with ios 6(used wi-fi)

    I have upgraded with ios 6 on 21-Sep-2012, after that I could not see my photos on my phone 4.
    I used apple id for icould buy not able to verify.
    thanks,
    umapathi

    Same issue. But my iPhone 4 does it as well. Only thing is with my iPhone it maintains a persistent 3G connection so at least I'm getting my messages as they arrive. But if I relied solely on WiFi  and my device was in sleep mode, I wouldn't get any notifications.
    On my iPad 2 I've tried forgetting the network, renew lease, rebooted, airplane mode etc. Nothing works.
    It's not crippling my device but it's really annoying and it's not the way it should behave.

  • Manager could not see employee's data on MSS

    Hello Experts,
    One the Manager could not see employee's data on MSS (in iview). Only employee names appearing but not the other details.
    We have checked and debugged, the data is populating in the backend but on portal its only displaying employee names.
    We have checked the configuration, roles and it is also looking fine. Not sure why it is not displaying data on portal.
    Please help. Thank you.
    Regards
    Saurabh

    First off I want to thank you Siddharth for all your responses.  Ultimately, your responses helped me get on the right path for  resolving this issue. 
    I ended up taking this into debug and finding out specifically why these absences did not appear on the team calendar.  I'd like to begin by indicating, in my opinion, this is a bug/programming flaw.
    Within IF_EX_PT_ABS_REQ~AUTH_CHECK_AND_ANONYMIZE_DATA there was a check to determine if the rule group had the IT2001/2002 Authorization Check section, Employees: Deactivate Authorization Check and Managers: Deactivate Authorization Check boxes checked.  For 1 out of the 3 rule groups configured, one group did not have those boxes checked, while the other two did. 
    What happened, is when the program built it's list of PERNA's that report directly to this manager, the first person in the list happened to be in the rule group that did not have the Deactivate Authorization boxes checked.  However, the remaining PERNA's in the list were in another rule group that did have the Deactivate Authorization boxes checked.  Based on my interpretation, the team calendar should have ommitted the absences of the one person, but should have displayed the absences for everyone else in the separate rule group. The code only reads what rule group the first PERNA in the list is and applies that MSS_NO_AUTHCHECK value to all the other PERNA's in the list.
    Either the code should do a MSS_NO_AUTHCHECK lookup on every PERNA on the list or should check what rule group the approver/manager is in and apply it to all his employees.
    Game - Set - Match.......

  • Could not see SH schema details in AWM 11g.

    Hi all,
    I have installed oracle db 11g (11.1.0.6) and installed awm 11.1.0.7.
    I am trying to open db instance in AWM by SH Schma, but i could not see the dimensions which already in place (as this is oracle defined sample schema). What could be done to see the details of schema.
    regards
    chandra kanth.

    AWM allows you to connect to the database in two modes: 10g and 11g. In 10g mode you will see only the 10g style AWs, and in 11g mode you will see only 11g style AWs. I don't know which version of the SH AW you have, but it is worth trying both connection modes. You will see the option ("Cube Type") in the dialog where you enter the password.
    More generally you should upgrade your database instance to 11.1.0.7 at the least if you are planning to use OLAP, and there are recommended OLAP patches to be applied on top of that. See the following certification page for details.
    http://www.oracle.com/technetwork/database/options/olap/olap-certification-092987.html

  • Deskto is right aligned and could not see the brouser

    once i open the internet by browsing Firefox the screen resolution is right aligned and could not see the full screen

    Hi,
    Trace with St01, which authorization obj is posting and see the user is having authorization for the object in the T code.
    thanks
    sk

  • Approver could not see the active button 'Approve'.

    Hi Gurus,
    I am a beginner to SRM and EBP.
    I have a problem to solve immediately.
    In the purchase order approve screen, approver could not see the active approve button . It is grayouted in the screen. I have checked the roles for the approver , and found ok..
    Please help me where to look for the problem and how to get activate the approve button..I will  highly appreciate if any related documents can be sent to [email protected]

    Hi,
       Maintain the entry in tcode SWL1 for Attributes EC_DECISION and EC_MAIL for the WF task.
    BR,
    Disha.
    Pls reward points for helpful answers.

  • HT4059 could not see the ibook icon on ipod touch 5th generation

    I downloaded the ibooks app in App Store, but could not see the iBooks app on the screen. Why?

    You've checked all of your homescreens for it, and tried searching for it via the spotlight search screen (swipe the first homescreen to the right) ? There is a limit of 11 homescreens after which apps are only accessible via the search screen.
    If that doesn't find it then have you tried a reset to see if it appears after the iPod has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

  • I have iPhone4 with updated software 6.0.1. Voice nevigation for map is not working. I could not see the voice options in setting/mapp.

    I have iPhone4 with updated software 6.0.1. Voice nevigation for map is not working. I could not see the voice options in setting/mapp.

    Voice navigation is not available for the iPhone 4

  • HT201269 could not see the iphone icon in my Dell computer

    I have iphone4 and I could not see the iphone icon in my Dell computer when I connected with cable. In addition, it is showing that the MTP Driver is not installed properly in your computer. I wish to transfer iphone photos in to my computer. Please suggest me in this regard. thanks
    <Subject Edited by Host>

    Hi mallikb4u,
    Welcome to the Apple Support Communities!
    There are two separate steps you will need to take in this situation. The first thing I recommend you doing is following the first attached article to help you resolve your iPhone not showing in iTunes when connected.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Once you complete the steps listed above and you iPhone is showing in iTunes, I recommend reading over and using the instructions in the next article for importing photos from your iPhone to your computer.
    iOS: Import personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/HT4083
    Have a great day,
    Joe

  • Could not see Layout....

    'Hi,
        I have ECC5.0..Able to manipulate all the elements of wd framework,But I could not see layout portion of views.Browser in that window console out 'this program cannot display the webpage'..Is there any way I can make Webdynpro work in ECC5.0.
    Thanks
    Surendranath

    mostly the supporting software doesnot exist in the system...try to install the software

  • Could not see oracle database homepage in oracle 10g version

    hi ,
    i am trying to open database home page option of oracle 10g software, but could not do it.
    i have started the services ORACLEXETNS listener,oracle service XE, and could not see the database home page.
    i am new to oracle 10g,
    i am getting the error 'page cannot be displayed' .
    could some one help me regarding this.

    Are you taking about enterprise manager .Type a correct address in address bar to run web base enterprise manager.you can check whether enterprise manager is running or not by using command >emctl status dbconsole .Or you have some other issue.please write if there is any error.
    Regards

  • Could not see link to BOR object in attachment section of a dialog WI

    Hi,
        I have built a custom approval and a dialog WI (decision step) is sent to the approver for approval.
    In the preview, earlier I user to see a link to the BOR object in the 'Objects and attachments' section and when I hit that link the BOR's  default method (which is display in my case) is executed.
    For some reason, I could not see the link now. I think it was showing some months ago (not sure)
    Need your help in sorting this issue.
    Thanks,
    Amit Jain

    Hi,
    Please check the binding between the workflow and decision step. Make sure that there is an element in the task container of the BO type and the binding is perfectly present.
    Hope this will help.
    Thanks,
    Samson

Maybe you are looking for