I could not see photos tab under my iPhone in itunes.I use new version of iTunes

Hi,
I could not see photos tab while connecting my iPhone with iTunes which is new version 11.Kindly help me with this issue.
Regards,
Mastermouly

Is iTunes fully expanded? It's the last tab.

Similar Messages

  • Could not see Security Node under Global Explorer.

    Hi All,
    Could not see Security Node under Global Explorer, can some one guide is there any I can make changes to the setup to see the Security node.
    Thanks in Advance.
    --Satish                                                                                                                                                                                                                                                                                                                                                                                   

    Hi
    Is OWBUSER the repository owner? If not then log on as the repository owner. Otherwise it may be you have killed the panel and it has disappeared, see post here for resetting layout.
    You can have as many target users that you deploy into as you want.
    Cheers
    David

  • I could not see photos my contact sent me

    Dear skypers, please help me this case. I've already updated my skype to the lasted version, however I could not see photos my contacts sent me. All is just a square with no picture. Previously I could fix this issue by updating my skype, but this time it doesn't work as before. please see my attchached photo. Thanks!
    Attachments:
    10363673_728066673980216_7528487022392816923_n.jpg ‏122 KB

    What version of Windows are you on (XP, Vista, Windows 7, Windows 8 )? Is it 32-bit or 64-bit?
    http://support.microsoft.com/kb/827218
    What is the version of Internet Explorer installed on your computer?
    In Internet Explorer go to Help -> About Internet Explorer.
    P.S. Please, don’t say that you are not using Internet Explorer. This is irrelevant. Skype depends on Internet Explorer.

  • I could not see photos after updated with ios 6(used wi-fi)

    I have upgraded with ios 6 on 21-Sep-2012, after that I could not see my photos on my phone 4.
    I used apple id for icould buy not able to verify.
    thanks,
    umapathi

    Same issue. But my iPhone 4 does it as well. Only thing is with my iPhone it maintains a persistent 3G connection so at least I'm getting my messages as they arrive. But if I relied solely on WiFi  and my device was in sleep mode, I wouldn't get any notifications.
    On my iPad 2 I've tried forgetting the network, renew lease, rebooted, airplane mode etc. Nothing works.
    It's not crippling my device but it's really annoying and it's not the way it should behave.

  • 5th Gen Ipod does not show photo tab under preferences

    I am trying to get pics onto my Ipod. The ipod tutorials suggest going to a photo tab which I do not have. I can not update the Ipod because Itunes 7 says that Ipod is already up to date? Is anyone having this problems?
    5th gen ipod   Windows XP   Itunes 7

    The ipod tutorials suggest going to a photo tab which I do not have. I can not update the Ipod because Itunes 7 says that Ipod is already up to date?
    can you check something for me? what icon is showing up in the itunes sourcelist? is it a wee picture of your 5th G, or does it look quite different?
    what version of the firmware is being cited in the "summary" tab you see when you select the ipod in the sourcelist? is that the same version that you see in the "About" screen on your ipod?
    Where's the iPod About screen, and what's in it?

  • Could not see Java tab on Apache Tomcat 5.5.20 Properties in CCM

    Hi,
    After uninstalling and reinstalling BusinessObjects Edge 3.1, I can no longer see Java tab on Apache Tomcat 5.5.20 Properties in Central Configuration Manager (CCM). I can only see 2 tabs namely Properties and Dependency. Therefore, I could not start my Tomcat because I could not change Java maximum memory pool from 1024 to 768 in the Java tab.
    Please help.
    Hapizorr

    Hi Denis,
    Yes, it works. Thank you.
    Hapizorr

  • "The iTunes server could not be connected..." How do I install the new version of itunes now?

    Every time I try to check for updates I get this message across my screen.
    "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “ax.itunes.apple.com”, which could put your confidential information at risk. Would you like to connect to the server anyway?"
    After which it informs me the user could not be connected.
    I need to update so I can sync my phone that just got replaced. Is there any way to do this?

    Refer to this article:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/TS1814

  • Is there any way to have a music track not snap to the start point of the movie? Using new version on iOS.

    On iMovie for the Mac it's possibly to have a music track start at any point in a project I like. For the life of me I can't figure out how to get music on the iOS version to do anything other than snap to the beginning of the project. Any help would be greatfully received.
    I've tried it it using the latest version of iMovie for iOS.

    If it is a background audio track (green), then select it, tap ... in the inspector and choose 'Move to Foreground"  Now you can put it wherever you like.

  • No Photo tab under source list for 3rd generation ipod nano

    I have a 2nd generation ipod nano and recently purchased a 3rd generation ipod nano. I have the latest version of itunes, however, there is no photo tab under the source list. How am I supposed to import my photos?

    I am a brand new ipod user and I have not been able to find the summary, music videos and photos tabs. I have gone into every tab up on the Itunes tool bar and poked around but still can't find it. No such page opens up when I connect the nano. Can someone please help?
    Thanks in advance.

  • HT201269 could not see the iphone icon in my Dell computer

    I have iphone4 and I could not see the iphone icon in my Dell computer when I connected with cable. In addition, it is showing that the MTP Driver is not installed properly in your computer. I wish to transfer iphone photos in to my computer. Please suggest me in this regard. thanks
    <Subject Edited by Host>

    Hi mallikb4u,
    Welcome to the Apple Support Communities!
    There are two separate steps you will need to take in this situation. The first thing I recommend you doing is following the first attached article to help you resolve your iPhone not showing in iTunes when connected.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Once you complete the steps listed above and you iPhone is showing in iTunes, I recommend reading over and using the instructions in the next article for importing photos from your iPhone to your computer.
    iOS: Import personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/HT4083
    Have a great day,
    Joe

  • Could not see object list selector in SE80

    Hi,
    I could not see <b>object list selector</b> in SE80.  Any body is having idea Please
    help me.
    Regards
    (yugandhar)

    navigation:
    settings-->select tab (workbench/general)
    and select check boxes   repository browser and
    repository information system.
    regards.
    santhosh reddy
    reward if useful.

  • WHY DO I HAVE TO CLICK ON " GROUP YOUR TABS" IN ORDER TO SEE HOW MANEY TABS ARE THERE? WHY CAN NOT SEE THE TABS?

    help...........
    it happen, because i wanted to customize my fire fox and drag the tabs over navigation tool bar.. now i can not see the tabs unless i click on group your tabs button :( and can not change it any more

    By PM
    ''hi John, i can not see, how many sites are open, because i do not see the tabs! i am sorry but i do not know how to explain it:( I see a window with my bookmarks -toolbar, menu bar and navigation bar, but no tabs for the sites, i am on! thank you for taking time and answering! ''
    What happens when you open a new tab for instance use Keyboard shortcut Ctrl +T does that open a new tab that you can see. Please attach a screenshot of your ordinary Firefox page e.g. open on this forum. And a screenshot of the Group Your tabs view.
    * [[How do I create a screenshot of my problem?]]
    * [[How to make screenshots]]
    I could suggest trying the Firefox reset, but that may be rather premature
    * [[Reset Firefox – easily fix most problems]]

  • Could not see the data in the cube

    Hi all,
    Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
    I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new)  which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
    Can anyone plz help me out.
    Thanks in advance.
    Thanks,
    Preethi.

    Hi Balu,
    I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
    I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
    Hope its clear.
    Thanks,
    Preethi.

  • Inline item mx:Image ... in mx:itemRenderer could not see the defination of method

    I have following code and got a compilation error ("possiblely called an undefined function") because the <mx:Image ...> in the <mx:itemRenderer > could not see the defination of "aMethod" method:
    <mx:Form ....>
    <mx:Script><![CDATA[
    private function aMethod(evt:Event):void {
               // code...
    ]]></mx:Script>
    <mx:Canvas label="Tile View" width="100%" height="100%" >
              <mx:TileList id="photosTileList" dataProvider="{this.photoDP}" width="100%" height="100%"  >
                        <mx:itemRenderer >
                            <mx:Component>
                                <mx:Image horizontalAlign="center" source="{data.url.text()}"
                                    toolTip="{data.caption.text()}" width="55" height="38" complete="aMethod(event)"/>  <!-- It causes the error -->
                            </mx:Component>
                        </mx:itemRenderer>
             </mx:TileList>
             <mx:Image .... complete="aMethod(event)"/>  <!-- It is OK here -->
    </mx:Canvas>
    </mx:Form>
    I do not know why the inline <mx:Image> inside <mx:itemRenderer> can not see the "aMethod" function defination in the same mxml file.
    Any suggestions?

    You need outerDocument, and the method cannot be private, it should be public:
    complete="outerDocument.aMethod(event)"
    If this post answers your question or helps, please mark it as such.
    Greg Lafrance - Flex 2 and 3 ACE certified
    www.ChikaraDev.com
    Flex / AIR Development, Training, and Support Services

  • I could not transfer photos from iphone to macbook through iphoto. It is giving an error " could not be imported, file is in unrecognized format"

    I could not transfer photos from iphone to macbook through iphoto. It is giving an error " could not be imported, file is in unrecognized format"

    Did you look in iTunes?

Maybe you are looking for