I could not update my ipad OS from 7.0.4 to iOS8

When I go to Setting --> General --> Software update the loading button display forever "Checking for Update"
Any clues so I can update to latest OS?

Update directly using iTunes on your syncing PC.
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
Scroll down to "Update your device using iTunes" section

Similar Messages

HT1212 after over an hour with two Apple support reps I still cannot restore my Ipad that tells me "Ipad is disabled" I was directed to click install update which took over an hour but it didn't complete saying," ITUNES could not connect w/Ipad..hardwire

How do I restore IPAD functioning after receiving a message stating "Ipad is disabled" Note. user and passcodes are verified as enabled. Also my mfgr serial number was supplied. Downloading latest updates per direction via my HP hardwired to Ipad, failed after an hour with a message "Itunes could not connect w/Ipad because it was locked with passcode!"
thanks, Applesauce42 turning sour.

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I tried to restored my iPad1's iOS5 to factory setting. There are error messages. Now my iTunes could not detect my iPad anymore. How can I proceed from here?

Hi All,
I have problems with iOS5 installed on my iPad1.
After successfully installing the new iOS5, my iPad1 apps are jumbled up with my wife's apps. Some of my paid apps are missing.
So, i tried to restore to factory default. Now, my iTunes could not detect my iPad, and my iPad only shows the picture "to connect iPad to iTunes".
I restarted my iMac and checked that all softwares are up to date.
Please advise.
Many thanks.

If you restored from a backup, you simply restored the corrupt files again.
You could find the corrupt file through a slow process of eliminating apps and data - removing all content - and then syncing content back again - slowly adding apps back on - until the problem surfaces again - and the you could pin down the last apps or apps that you just added as being the problem apps/files. You may find the corrupt file - and you may not.
Your backups can be deleted by going to iTunes on you computer and go to Edit>Preferences>Devices. You will see your backups/backups in that window. Click on the backup and then click on delete backup - if that is what you really want to do.

I deleted all Apps on iPad as they were associated with an out of date Apple ID and I could not update them, but the "App Store" logo still shows that there are 2 to be updated and when I go there I cannot delete. Please assist. Thanks.

I deleted all Apps on iPad as they were associated with an out of date Apple ID (which I have forgotten the password) and I could not update them, but the "App Store" logo still shows that there are 2 to be updated and when I go there I cannot delete. Please assist. Thanks.

Why don't you explain what happens when you try to delete these two apps that are showing that they need updates. You can only delete them if they are actually installEd on the iPad. Are they on the device?

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

The specified module could not be found. (Exception from HRESULT: 0x8007007E)

Hi,
We have an exisiting .NET MVC project which uses crystal reports versions 2008 (dlls of version 12.0.). No we have Crystal Reports 2011 for.NET SDK is installed and I've updated all the crystal related dlls (Enterprise.Framework.dll, CrystalDecisions.Chared, CrystalDecisions.Web ...) to newer version which is 14.0. After this upgrade, when I run application, I am getting the following error:
The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[FileNotFoundException: The specified module could not be found. (Exception from HRESULT: 0x8007007E)]
   System.Reflection.Assembly._nGetModules(Boolean loadIfNotFound, Boolean getResourceModules) +0
   System.Reflection.Assembly.nGetModules(Boolean loadIfNotFound, Boolean getResourceModules) +40
   System.Reflection.Assembly.GetTypes() +28
   System.Web.Mvc.TypeCacheUtil.FilterTypesInAssemblies(IBuildManager buildManager, Predicate`1 predicate) +161
   System.Web.Mvc.TypeCacheUtil.GetFilteredTypesFromAssemblies(String cacheName, Predicate`1 predicate, IBuildManager buildManager) +63
   System.Web.Mvc.ControllerTypeCache.EnsureInitialized(IBuildManager buildManager) +115
   System.Web.Mvc.DefaultControllerFactory.GetControllerTypeWithinNamespaces(RouteBase route, String controllerName, HashSet`1 namespaces) +58
   System.Web.Mvc.DefaultControllerFactory.GetControllerType(RequestContext requestContext, String controllerName) +634
   System.Web.Mvc.DefaultControllerFactory.CreateController(RequestContext requestContext, String controllerName) +58
   System.Web.Mvc.MvcHandler.ProcessRequestInit(HttpContextBase httpContext, IController& controller, IControllerFactory& factory) +118
   System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContextBase httpContext, AsyncCallback callback, Object state) +46
   System.Web.Mvc.MvcHandler.BeginProcessRequest(HttpContext httpContext, AsyncCallback callback, Object state) +63
   System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData) +13
   System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8770194
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
We have another ASP.Net project, which is working fine after I update older crystal dlls to newer ones. This project is working fine.
Thanks in advance

This error I am getting, after I update the "CrystalDesicions.Web.dll" from version 12 to 14.0. Any I dea on this?
After, I verified with fusin log and ProcessMonitor, they are reporting on this:
path to BusinessObjects.Licensing.KeyCode.Decoder.dll is not found. Does this dll is used by CrystalDecisions.Web.dll?
and I don't have any mixed reference.
Any help?

ITunes could not update the carrier settings on your iPhone

When I try to download and install the new carrier settings file, I get the message "iTunes could not update the carrier settings on your iPhone. You do not have enough access privileges for this operation." (I got a similar message when I tried to download and install the OS update.)
I've been able to work around the problem by creating a different user and installing from there. But I'd like to be able to find and correct the cause of the error message instead of using a workaround. It seems like there's a file or folder somewhere that has somehow become read-only. Does anyone know where iTunes downloads the carrier settings and OS update files?

Jim VanLeeuwen wrote:
You will find them in separate folders within your user account Library/iTunes folder.
That was it. Somehow the owner of ~/Library/iTunes got changed to root.
Jim VanLeeuwen wrote:
Have you tried using Disk Utility to Repair Permissions?
Right after I posted the message I thought that the age-old placebo of repairing permissions might actually fix my problem. Because of your quick reply I found the ownership problem before repairing permissions. So here was the perfect chance for a test. Repair Permissions ran successfully but the owner of ~/Library/iTunes was still root. Repair Permissions fails the test.
I manually changed the owner to steve and was able to download and install the carrier settings.
Thanks!

PC Suite: "Could not update contacts" - "Kunne ikk...

I got my new Nokia 6220 Classic yesterday and went immediately start to manage my contacts. I have pictures on about 70 to 202 contacts.
When I had to add a picture to a contact, PC Suite posted an error "Could not update contacts" Since my phone was set to via Bluetooth I tried with the USB cable without success. I rebooted phone and PC but it was the same.
I uninstall PC Suite and tried again but the USB cable and Bluetooth, without success. Today, I am at my job where I use the USB interface. Exact same error. I tried to update the firmware on the phone, but with the same, because there is not a newer version. But I get the same problem. The calendar works as it should, but messages do not work, here comes the message "The message could not be sent." - I can (From job, not at home) see the messages which have come, but can't answer or create new messages ..
Now I run a PC Suite Cleaner and reinstalled PC Suite. Same problem.
What should I try and what can be wrong?
I am happy using PC Suite and I use it very much! I want it to work .. )
Please.. ;o)

Hmm... I think I have solved this..
I started by taking a Backup this morning.
Now I finally desided to delete all and start over. I made another Back up, Restored the Back up from erliere. Then set contact memory to SIM and back to Phone...
And now it works?!?!?!!?
Only a few photoes to some contacts has to be redone, and som contacts appear more then once.. But My Suite works!
Suuiiittee!! (Sweeet!)
I really hope some one elles but me figures this out..

Could not update OS of iPhone

Computer running windows XP
Could not update OS of iPhone 5 from 6.0 to 6.1.2. Download process hang after only 1% Download
Internet Security software Norton Antivirus. Could Norton prevent the download?

Thanks. It works. I am surprise that Norton Antivirus will stop the connection with an Apple Download site. I should pass this information to them.
The second problem was when I backup the IPhone 4 and try to restore that to iPhone 5. Nothing went through. I noted that the backup file was named user;s iPhone. When iPhone 5 was connected, it automatically backup the phone's data to user's iPhone!!!. So I changed the name of the iPhone 4 backup and managed to restore the data to iPhone 5. It is because I was using iTune in a windows XP setup. Most annoying.
If Apple want to get the windows community to use its phone, they need to make the transfer of old phone data to the new phone foolproof. I don't use an iPhone. Better information on the Support Site will help.

Could not update his iphone to os 5

My husband could not update his iphone to os 5 from his computer (due to itunes not being upgradeable) so he jumped on mine and upgraded, he later mentioned the warning about losing all content. He did back up on his computer, thinking he could go to his computer to get all his info and apps back after upgrading. UGH! So now I am wondering, can that backup that is on his old mac be transferred to my Mac book Pro, and fix the problem. If so can some kind soul direct me to easy instructions?

My husband could not update his iphone to os 5 from his computer (due to itunes not being upgradeable) so he jumped on mine and upgraded, he later mentioned the warning about losing all content. He did back up on his computer, thinking he could go to his computer to get all his info and apps back after upgrading. UGH! So now I am wondering, can that backup that is on his old mac be transferred to my Mac book Pro, and fix the problem. If so can some kind soul direct me to easy instructions?

When restoring and updating my iPhone I am getting the following message " iTunes could not update to the carrier settings for your iPhone.an unknown error occurred (1630)

When restoring and updating my iPhone I am getting the following message " iTunes could not update to the carrier settings for your iPhone.an unknown error occurred (1630).can anyone please with a knowledge tell me what I should do please. Thank you

The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........

Windows could not update the computer's boot configuration. via UEFI installation

I recently performed a clean WIndows 8.1 installation using my new Hard drive. However, under UEFI mode from BIOS, everytime the setup process reaches the "Installing Updates" stage, I kept on receiving an error "Windows could not update the
computer's boot configuration, Installation cancelled.
I was a bit puzzled as everytime I install Windows 8.1 via LEGACY mode from BIOS, setup finishes! I cannot tell whether I need to mod my BIOS or what.
please help.
raymund r

Hi,
Please make sure that Delete all partitions/volumes on the disk # (ex: Disk 0) that you want to install Windows 8.1 as UEFI on until that disk # shows as unallocated space.
Try again to install Windows 8.1 again.
If it still fails, please post back the setuperr.log and setupact.log under C:\$WINDOWS.~BT\Sources\Panther\ for our research. You can copy them out in WinPE command mode.
Also, I would like to check if you use bootcamp to install Windows 8.1 on Mac computer. If so, check the solution here:
https://discussions.apple.com/thread/5491283?tstart=0
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Kate Li
TechNet Community Support

I can not update my installed apps from the App Store Update page. I can individually update from the App Store Purchased page. I tried a soft reset but still unable. Any suggestions?

I can not update my installed apps from the App Store Update page. I can individually update from the App Store Purchased page. I tried a soft reset but still unable. Any suggestions?

You are doing all that you cn do right now other than to update the apps in iTunes on your computer and sync them to the iPad.
There has been a problem with the App Store updates tab for a few days now and we are all waiting for Apple to fix it.
Look at all of the discussions on the iPad forum that are talking about this right now.

Error ''windows could not update the computer's boot configuration"

i have an Hp pavilion dv 6 -3045 product wr747ea#abe ,till now i installed windows 7 on it several times but this time after i formated the partition and started the instalation from usb at completing the installation a message popup ''windows could
not update the computer's boot configuration''.Also i tried with another copy of windows 7 also booted from usb but i get same message at same step. I used a memory stick and bootable windows 7 from usb with Rufus program.
Please any sugestions ?

Hi,
Please make sure you have format the system drive and perform a clean install, not just override or upgrade from the previous system.
The bootloaders for Windows Vista and Windows 7 are quite similar, you could have a look at this article and see if it's helpful to you:
When I try to upgrade an earlier version of Windows to Windows Vista, I receive an error message: "Windows could not update the computer's boot configuration"
http://support2.microsoft.com/kb/931697
Karen Hu
TechNet Community Support

Windows could not update the computer's boot configuration Server 2012

I'm trying to install Windows Server 2012 on another partition (V:) that I create directly from Disk Management. After I create it, I do a simple format of the partition.
Next, I try to Install Windows Server 2012, directly on the recent partition, after the setup is completed, Windows Server 2012 boots to the Getting the devices
ready section, but stops and throws me this error.
Windows could not update the computer's boot configuration
After that the computer, restarts and it goes on and on unable to create a multi-boot environment. What's killing me is that I have done this on the past like 10 times and never run to this problem.
I'm running Windows 7 Home Premium on an ASUS K45 64 bit.

Hi,
You can try adding a new boot entry by using bcdedit tool:
Adding Boot Entries
http://msdn.microsoft.com/en-in/library/windows/hardware/ff541231(v=vs.85).aspx
Or you can build a usb-bootable deivce to install the image:
Walkthrough: Create a Bootable Windows PE RAM Disk on a USB Flash Disk
http://technet.microsoft.com/en-us/library/dd744530(v=ws.10).aspx
Hope this helps.

I could not update my ipad OS from 7.0.4 to iOS8

Similar Messages

Maybe you are looking for