I could not use my mac with projector, because it doesn't show my power point, just home screen.

I could not use my Mac with projector. The projector does not show my power point, just the wallpaper picture. What should Idi, where can I setting it?

What format is the video in?

Similar Messages

Could not use the clone stamp tool because the area to clone has not been defined

Freshly installed Elements 10. Can not use the option-mouse click to define an area for the clone stamp. The error I get is:
Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point).
New Mac Mini. Had the same problems in Elements 9 so I installed the 10 trial. Is this a key binding error? Did not have this issue with Elements 9 on my Mac Air or my Windows 7 system.
I'm not a newbie and know how to use the clone tool. I won't say I'm an expert so if it's something related to layers please throw out some ideas.

This problem came back up. I hadn't used PSE since last November and was frustrated to run into it again. I don't think it's a layers issue afterall.
I use a wireless keyboard and mouse on Mini and mouse on Air, although keyboard for Air is upstairs at a desk with monitor for occasional use. Regardless blue tooth is on for these devices. Problem exists. Turn bluetooth off on Air and the problem is gone. It must be related to option key when bluetooth is on, I guess some different mapping. Even when I have bluetooth on and try to use Option key on the Air keyboard it does not work.
So now where do I look for configs to check?

Could not use the spot healing brush because of an internal error!

Hi All. I have been trying out the Photoshop CC trial and all is well but all of a sudden I have been getting the "could not use the spot healing brush because of an internal error" message when I'm using the healing brush rapidly! I'm sending the tiff file from Capture One Pro 8 as a Tiff file so I'm not sure if this has anything to do with it.
Many Thanks

Hi it does not crash but I looked in the Photoshop Crashes folder anyway and it was empty! The message flags up and then press OK to remove it.

Could not use the clone stamp tool because the area to clone has not been defined (option-click to d

Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. can any one help? I have reset the tools restrted my computer. i am at a loss...

Are you working with more than one layer? If you are working with multiple layers it makes a difference when selecting source spot and then trying to clone to a different layer. I find that I have to be sure I am selecting the corresponding layers for source and then for application when working within multiple layers.
At least for me this is the case when getting that type of message. I am very new to this program though, so maybe someone else has a more concise answer for you.
Good luck and write again if this doesn't help.
Moon52
Sent from my iPhone

When I try to use the Smart Brush I keep getting this message "Could not use the Smart Brush tool because it is not a valid Photoshop document"

When I try to use the Smart Brush I keep getting this message "Could not use the Smart Brush tool because it is not a valid Photoshop document". Can someone please help me fix this? It's never done this before until now...

First go to the editor preferences>general and click this button, then restart the editor and try again. If that doesn't do it, more info, like your version of PSE and your operating system:

I could not use my Mac Mail today.

I can not use my Mac Mail today.

What problems are you having? Please describe in detail all you have attempted to do in order to resolve the issue.
Which os version are you using? It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions. As well as the version of Mail you are using which you also did not mention.

Could not use 11g OWB with 10.2 database repository

Hi all,
I am using 10.2 database and 10g R2 OWB and in the forums I read that 10g R2 have problem (no materialized view created when pre-aggregating ROLAP cube .
So i downloaded the 11g OWB standalone, but I could not login into the sqlplus of 11g OWB, as mentioned in (http://www.oracle.com/technology/obe/11gr1_owb/owb11g_update_extend_knowledge/less1_setting_up/less1_setting_up.html)
I have tried to login with password that i have for 10g database and also one i mentioned in configuring WF (both were same) ,also change_on_install and oracle .
Could anyone please suggest me how to login.
Please also suggest if that bug as mentioned above exist or if there is any workaround/patch so I can use 10g r2 OWB itself.

Thanks for the response, Greg
I understand ur point completely, I might have sounded confusing when i said repository. I actually meant 10.2g database.
As u mentioned I followed that step: But when i did steps mentioned below i could not login inside:
Note: The method by which you invoke SQL Plus is important. Do not invoke SQL Plus from Start > Programs > Oracle database home folder or Warehouse Builder folder! Instead, invoke SQL Plus from Start > Run > cmd.exe. Type the Path command and press Enter. You want to check that Warehouse Builder is near the front of the path statement, so that the SQL Plus session will invoke from the Warehouse Builder installation. If not, you may need to temporarily set the path, such as Path=<Warehouse Builder home>\bin. Then invoke SQL Plus as SYS with SYSDBA privileges. For example, at the command line you might type: sqlplus sys/<sys password> as sysdba.
what password for sys should i use ?
I used following paswords but none worked: pasword for sys account while installing 10g database, oracle, change_on_install.
At installation of OWB 11g it doest not ask for any password also.
Best regards,
Deepank

"Could not use the clone stamp tool because of a program error". How to fix this fault?

When I try to use the Clone Stamp Tool I am met with the message shown above. I have tried in all the ways I could find to beat this: different photos, switched the computer off and on again, run a de-bugging program through it (Advanced System Care 5 Pro) and Microsoft's own stuff. The problem exists solidly and, without one of its most important picture repair tools Photoshop is pretty much useless.
I have just set this new Photoshop Elements 10 program up on my Windows 7 (64) laptop. I have plenty of memory and a large enough hard drive; the machine is fairly new, stable and does not usually suffer from programming problems. I have found nothing on any of the Adobe Forums, or in other sites, to give me a hint as to what has caused the problem other than a bad program disk. My first conclusion was that I should reinstall the program, but it appears that I will then lose one of my two registration rights, that strikes me as being ridiculous as reinstallation is surely the most logical thing to do with a potentially faulty program disk! But I would have to uninstall to reinstall, and that's when the the second registration cuts in I am advised. I have tried every way I can think of to beat this to no avail. I'll be truly grateful if someone can help me out on this. Thank you!

Thanks guys! I'm afraid that I'm still not sure: I've been told that uninstalling - after of course deactivating - amounts to a life gone... Yet according to the set of licence rules Adobe has, you're allowed to copy programs in a mirror image which, of course, would be used for a clean wipe - and surely that contradicts their set of rules? The rules seem to imply that that would be okay: no life lost. My concern is that through no fault of my own I have what appears to be a duff program; it's out of warranty now (my fault - I didn't install it until I could buy a more heavy-duty laptop). If the rule is "two-strikes-and-your-out, then I lose my last reactivation after THIS installation. I will get in touch with Adobe - but I live in the UK, and therein lies the problem: the equivalent of $39 dollars for the chat and whatever else it might cost is off-putting to me I'm afraid. If I could find out whether or not Adobe has a patch or something I would be a lot more happy about it all - the reinstallation after all may NOT cure the problem and I'd be stuck with a bunch of coffee cup coasters! Hey, ho...

Could not use the color replacement tool because it only works in full color modes

Hi, when trying to use the Color Replacement Tool, I get this error. I'm not sure how to get in full color mode. Please help.

Go to Image>Mode and be sure it's RGB and not index color or something.

Why I could not use "find my iPhone" with my Mac.?

I can not open the icon of "find my iPhone" on my Mac..

yes, I just can open a moment ago, thank you, but why let lost trace my iPhone while it stolen? any other way let me can find back the trace record? thanks!
Apple Support Communities Updates <[email protected]> 於 2014年12月15日下午10:12 寫道：
You received a reply
Barry Hemphill <https://discussions.apple.com/people/Barry+Hemphill?ac_cid=op123456> has replied to your question. You can view the full discussion <https://discussions.apple.com/message/27291392?ac_cid=op123456#27291392> in Apple Support Communities.
why I could not use "find my iPhone" with my Mac.? <https://discussions.apple.com/message/27291392?ac_cid=op123456#27291392>
Sign in to iCloud:
https://www.icloud.com <https://www.icloud.com/>
Then click on "find my." Find my iPhone must be turned on on the phone.
Barry
Correct Answer <https://discussions.apple.com/email/thread/6725298/correct/27291392> Helpful Answer <https://discussions.apple.com/email/thread/6725298/helpful/27291392>
Use the buttons above to tell Barry Hemphill and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to Barry Hemphill, go to the discussion <https://discussions.apple.com/message/27291392?ac_cid=op123456#27291392> in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile <https://discussions.apple.com/user-preferences!input.jspa>.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved <http://www.apple.com/legal/> | Privacy Policy <http://www.apple.com/legal/privacy/> | Terms of Use <https://discussions.apple.com/docs/DOC-5952> | Apple Support <http://www.apple.com/support/>

How to I get a link with a "Mail to" address to open up a Compose window in my Yahoo mail, rather than in the Mail progrom on my Mac. I do not use the Mac Mail program.

How to I get a link with a "Mail to" address to open up a Compose window in my Yahoo mail, rather than in the Mail progrom on my Mac. I do not use the Mac Mail program.
== This happened ==
Not sure how often
== always

Thank you, "the-edmeister" -- You render a great service, one that lifts my spirits.
Your answer also taught me to be a little more persistent, as I had started looking at Preferences, and just didn't notice the icons (including Applications) at the top of that window that would have led me to my answer.
Dave

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?

When I compose an email in either gmail or yahoo, the cursor lags behind for about 2 seconds. This does not happen when I compose an email with Safari or Chrome. I am using a Mac with Firefox version 3.6.3. Any idea why this happens?
== This happened ==
Every time Firefox opened

try
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit   I writ again my problem    i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5

On Thu, Jun 14, 2012 at 12:54 PM, mahdi ehsani <[email protected]> wrote:
On Sun, Jun 10, 2012 at 7:29 PM, Apple Support Communities Updates <[email protected]> wrote:
Apple Support Communities
Re: after install windows 7 32 bit there is no sound my mac is os x 10.7.2
created by The hatter in Boot Camp - View the full discussion
This solved my question
This helped me
you have RealTek on your workstation and just download the current driver which is easy to findwww.realtek.com
This solved my question
This helped me
Did this help? Go to the message, sign in, and reply or mark the response as correct or helpful
Start a new discussion in the same community/choose-container!input.jspa?contentType=1&containerType=14&container=2143&ac_ci d=op123456
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
© 2012 Apple Inc. 1 Infinite Loop, MS 303-3DM, Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Apple Support Communities Terms of Use | Apple Support
hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5   Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result
please help us by address site please please .....
<Edited by Host>

hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

I could not use my mac with projector, because it doesn't show my power point, just home screen.

Similar Messages

Maybe you are looking for