I could wish for a plugin to manage to open a LibreOffice calc sheet given as an URL in a HTML-page

I have a bookmark page in HTML pointing to a series if topics in my pet-hobby.
I would like to have the possibility to point to a (local) href in the list and open the subject as a calc-file in LibreOffice or OpenOffice just as easy as can be done with an image file etc.

Similar Messages

Is it possible to configure Firefox for Android so it doesn;t open a new tab every time a new url is sent to the browser?

We are using a web based service to register people's mood when they touch an NFC card against the tablet. Every time someone taps their card against it, it open up a new tab, and they then register the mood they are in.
We recently got to a situation where we had 150 tabs open which gives us concerns that at some point the tablet could just slow to a crawl or fall over.
The tablet is unmanned and so closing the tabs after every entry manually is not an option either.
Ideally we would like the browser not to open a new tab every time. Is this possible?
Thanks a lot

You should ask this on https://mail.mozilla.org/listinfo/mobile-firefox-dev instead of a end user forum. It may require building a custom APK of Firefox.

" plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
Shyam

Hi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam

I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

I can't get my password manager working. It remembers passwords for websites but when I enter in a new password (because this had to be changed) or when I have a new username + PW that I wish to save, the password manager does not appear.

If you updated your existing account then try logging out of it on the iPhone by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.
If you created a new account then you can log out of the old account and in with the new one as above, but any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can re-download its content and download updates to its apps.

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

If I Could Ask for Just One Thing in Siebel What Would it Be?

Hi All,
Think this is too interesting. A while back I was on a call with Oracle and was asked what one thing I would ask for if I could ask for anything in Siebel. At that time I drew a blank I could not think of an answer. I have two good ones now and want to see if this makes sense.
First – make the quality of Siebel releases even better than they are today. The quality of Siebel is very good but I would like to see it made even better. I wonder if part of this solution might be to not have so many code braches so more focus could be put on just one version. E.g. Instead of 8.0.0.0, 8.0.0.1 and 8.0.0.2 all being worked why not just put all the effort into 8.0.0.3 and making it super stable? Just an idea but improved release quality is wish #1.
Second – when the Siebel OM encounters an exception (e.g. address violation) don’t terminate the whole process and all the other threads (users) running. TOAD does this so we know it is possible. If TOAD encounters an address violation it pops up a message and allows me to report it back to their technical support but does not crash. We would need to discuss what should happen in Siebel but terminating the whole process and all the running users is painful for Siebel customers.
Take care,
R
Robert Ponder
Lead Architect and Director
Ponder Pro Serve
cell: 770.490.2767
fax: 770.412.8259
email: [email protected]
web: www.ponderproserve.com

I was a bit unpleasantly surprised the automatic restart of the client after a compile was broken in Siebel 8. This was announced in 7.x as a productivity improvement for the Siebel developers, so I would say this should be part of the test scenarios for Siebel. But thanks for the fixpack.
One thing I noticed on my current project is that it would be nice to have a conditional expression on the State Model level itself. That way it is much easier to manage a State Model for a limited set. Otherwise you have to create all possible State Changes and put conditions on them.
Seeing that Runtime Events can work with conditions on two levels, I would see no significant hurdles to implement it for State Model.
And one little big annoyance is that you can't login with enter for the customer facing applications. Might not look like a big issue, but almost all web apps I use allow you to use enter after user and password. And don't forget you are ruining the first impression.
To end on a more positive note, I'm quite happy with Siebel 8.0 from a developer point of view. Keep up the good work and let's see how long I can stay a Siebel consultant. ;-)

Question.Why don't the apple company ever make a memory card that people could use for their apple product just in case customers run out of memory on their apple product?

Question.Why don't the apple company ever make a memory card that people could use for their apple product just in case customers run out of memory on their apple product?

One thing the iPad lacks is a file manager. There is no file explorer native on the iPad. If you started adding plugin cards, then you add the need for that. And, in PC's, most viruses spread via the file explorer (the definition of a virus is a malicious program that propagates itself across multiple programs)
There are a few drives out there for iDevices. Such as the WiDrive and others.

Help define the requirements for an Oracle Spatial management tool

Hi,
We are developing a tool that, we hope, will be indispensable for all Oracle Spatial and Locator dbas/users. We've released version 1.0, but we need your help to define the requirements for the next version.
What features would you like to have in a management tool for your spatial databases?
The features we've got so far:
1. Viewing of vector data in a map + attributes
2. Loading from shapefiles
3. Exporting to shapefiles
4. Validating metadata, indexes and spatial data.
We are adding editing of vectors in the next version - basic stuff for add, update and delete.
But there must be a lot more. What do you find difficult to do in Oracle Spatial/Locator? What would you like in a tool such as this?
Any feedback either to myself or the forum is much appreciated.
cheers,
Andrew
[email protected]
PS If you like to have a look at what we have done so far, go to http://www.geometryit.com/products/spatialConsole.php

Andrew knows what I have asked for but for others to think about and to start
the ball rolling, here's what they are:
1. Ability to enter own SQL commands but with PARAMETERS for attributes
and shapes as in the following examples:
SELECT ...
FROM my_spatial_table a
WHERE a.ATTRIBUTE = :attr
AND MDSYS.SDO_RELATE(a.shape,:polygon,'mask=anyinteract') = 'TRUE'
When executed the attribute value is asked for via a input box (data type?)
and the user is asked to define the SDO_GEOMETRY for the :polgygon parameter via mouse clicks on the screen.
Similarly, this would work for INSERT, UPDATE and DELETE...
INSERT INTO my_spatial_table (shape) values(:polygon)
The data type of an attribute parameter could be determined in two ways:
a) By querying the Oracle catalog;
b) By using a "PARAMETERS" command before the query as follows
PARAMETERS name type [(size)] [, name type [(size)] ...]
The PARAMETERS declaration has these parts:
name     The name of the parameter.
type     The type of the parameter.
size     The size of the parameter in characters or bytes.
2. When executing an SQL SELECT statement I would like the tool
to suggest the HINTS that are needed to improve performance.
3. Following on from 2, I would like to Tick an option that would return the
EXPLAIN PLAN that the query optimizer used when executing my query.
4. The tool has to support ALL Oracle's spatial vector data types.
5. It would be nice to be able to work with GeoRasters. Since Spatial Console
imports/exports shapefiles why not the same for rasters. However, the problem
with supporting foreign data formats is WHERE DO YOU STOP!!!!!
6. You could allow for the styling of the Spatial Console to be stored in the MapViewer catalogs or use the MapViewer catalogs when styling an Sdo_Geometry if it exists (I note that your tool extracts the SDO_METADATA
why not the MapViewer metadata as well)?
regards
S.

HT203200 I made yearly subscription to Chandamama junior English and Telugu magazines which are released on monthly. I could download for only 2months and cannot download any more. Please help

I have made yearly subscription to Chandamama junior english and Telugu magazines which are released monthly by publishers. I could download for only 2months from itunes store and now cannot download any more. No error message. When I enter my itunes store password, it simply ignores. Please help.

Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please.

How install my jar+native package for JRE plugin

I cannot figure out how to deploy a plugin consisting of a Java package that calls native code. The calling order is:
Applet -> installed classes in lib/ext/my.jar -> DLL in C:\\WINDOWS\SYSTEM32
I have gotten my plugin to work on Windows IE using the Microsoft JVM, and on Netscape using LiveConnect, and on Mac using MRJ. It also works with stand-alone Java applications. But I cannot get it to work with Applets when I am using the SUN JRE plugin for Java!
I can call the classes in the JAR file but they can't loadLibrary( the DLL ).
I put my JAR file in "C:\Program Files\JavaSoft\JRE\1.3.1_04\lib\ext".
I put my DLL in "C:\WINDOWS\system32" which is in the "java.library.path".
I was hoping that by installing the JAR file in the lib/ext folder that it would elevate its privelege and allow it to call loadLibrary().
I don't want to have to sign each Applet. My plugin is installed using a digital certificate. Once installed it should give regular Applets the ability to call my native code.
I am hoping to simply use a signed Java installer for the plugin that will copy my JAR file and DLL to the right places.
If you use IE or Netscape without the SUN plugin, you can try my plugins here:
http://www.softsynth.com/jsyn/plugins/
http://www.javasonics.com/plugins/
I'm tired of telling people to disable the SUN JRE plugin and enable the Microsoft JVM in order to use my plugins.....
Any ideas?
Thanks,
Phil Burk

I found a solution to my own problem. The problem was that classes in a JAR file installed in the "java.ext.dirs" path could not call System.loadLibrary() when called from an Applet.
The solution was to explictly make use of the priveledged status of the extension classes as follows:
Boolean result = (Boolean)
AccessController.doPrivileged(new PrivilegedAction()
public Object run()
System.loadLibrary("mylib");
return null;

Is adjusting permissions for LightRoom based archive management worthwhile?

I'm trying to set up an archive that is managed through a LightRoom Catalog. I was wondering if anyone has done this before and adjusted the permissions of their files to read only to ensure that LightRoom Catalog metadata changes do not alter or get saved to files.
I plan to have the archive set up in 3 locations with copies of the LightRoom Catalog. I will need to be able to add keywords and collections to a catalog at 2 of the locations. I am interested in using permissions to ensure that the catalog is the only file that needs to travel between the locations. I don't want to get into a situation in which altering the LightRoom Catalog might alter files and necessitate that I either save new metadata to files with each keyword/collection addition or that I regularly synchronize the entire archive to ensure all 3 copies of the archive are mirrors of one another.
I have three serious concerns about the longterm viability of managing file permissions:
1. I worry that it will be difficult to manage the user/s who have the privileges to manage these permissions and that it will be difficult to do so in different locations and on different computers
2. I worry about whether permissions management might introduce some form of file corruption
3. I worry about the time involved in altering an entire archives worth of permissions to read only and the time involved in reversing this every time I want to unarchive content for new projects
I have also posted this question to Luminous Landscape here: Adjusting Permissions for LightRoom Catalog Based Archive Managment. Worthwhile?

... and adjusted the permissions of their files to read only to ensure that LightRoom Catalog metadata changes do not alter or get saved to files.
By default, Lightroom does not write anything to your photo files. Of course, there's no way to prevent a user from changing this default behavior and writing information to the files. I suppose making the directories read-only helps, but people could still change that. If the directories are on a server, then only the server admin could change the permissions.
2. I worry about whether permissions management might introduce some form of file corruption
I never heard of such a thing, but this is an operating system issue, not a Lightroom issue.
I worry about the time involved in altering an entire archives worth of permissions to read only and the time involved in reversing this every time I want to unarchive content for new projects
I don't think you understand how Lightroom works. There would be no need to reverse anything to "unarchive" the content — although in my opinion, the idea of "archiving" content in the first place doesn't feel right ... if the photos are imported into Lightroom at one time, leave them in Lightroom, don't go through an archive process removing the photos from Lightroom followed by unarchive process, that is something that is ineffective and causes numerous problems with non-expert users. When you import photos into Lightroom, the photos still remain on your hard disk somewhere, Lightroom does not actually keep a copy of the photo. Lightroom keeps pointers to the photo's locations and stores any metadata and edits. Removing a photo from Lightroom (archiving) is the equivalent of deleting the metadata and edits, and I cannot see a reason to do that.
So, bottom line, to answer your title question, "Is adjusting permissions for Lightroom based archive management worthwhile?" — without further discussion of your setup and goals, I see no reason to even spend your time on this, unless you are the server admin of the location where the photos are stored, in which case then the answer is go right ahead and make them read-only.

IWeb Bugs and a wish for the future. :)

Hi there,
Two issues that I've found moving my photoblog to iWeb, and I'm wondering if they are bugs or issues that the community knows about:
1. I've changed the template I used a lot - font colours, background, etc. Now when I create a new blog entry, it uses the old, standard template and I have to change everything again. Is there a way to make iWeb realise that I've changed my "default" template settings so all new entries remain the same? It seems not. This is my feature wish.
2. Related to this, I solve this problem by just duplicating one of my existing pages and then changing the photo and content and date. The PROBLEM with this is where i think the bug exists. In iWeb, when I click Next/Previous, it goes between the different entries in chronological order, as expected... but when it publishes to .Mac, the next/previous buttons are really messed up, linking to articles/pages that are not even close to being near them in order. I've been able to determine that:
a. Create three new entries in iWeb. Works good.
b. Duplicate the middle entry, put it LAST in the order.
c. The NEXT button on this new, last entry links to the third item, just as the original 2nd item did before I duplicated it.
Is there any way to make iWeb re-calculate the next and previous buttons before you publish it? Or even better, any Apple folks around that can confirm/escalate this?
UPDATE: It's also possible that iWeb is ordering the next and previous buttons based on the time the entry was created in iWeb, rather then the time specified on the entry. If you are porting older entries from a previous blog, this can be a pain because you're not necessarily putting entries in from oldest to newest.
Either way - the behaviour isn't as expected: next and previous buttons ordered by the date specified in the iWeb 'Entries' window.
3. This is more advanced, but seems a bug none the less. I use .Mac publishing, because it's integrated and easy. But I also have my down domain, which I have configured to just "forward" to my .Mac folder. So, when someone goes to www.mydomain.com, the server connects to web.mac.com/me/iWeb/ and makes the request, translating the path. This works really great (save some initial headaches with character encoding), but comments in iWeb blogs don't work when you do this.
They work directly when you go directly to .Mac, but something about the comment system requires that the client browser accurately present the URL to the .Mac server, and in my case, it's reporting my domain name. As a result, when you click to add a comment, you get a "there has been an error" page and it dies.
If this little annoyance could be fixed in a point release version of iWeb, that would be AMAZING.
4. Lastly, one more wish for the future. .mac domain hosting. Domains aren't just for businesses - lots of people have them for their blog/photos/etc now. If I could make my domain point to my .Mac web hosting without any messy translation, I'd be in heaven. I don't even care if I only get my single e-mail address on the domain - just the hosting would be so excellent.
MacBook Pro 1.83 Mac OS X (10.4.6)

It sounds like it! I ported about 10 new posts from my old MovableType installation last night and am seeing the same behaviour - duplicating entries definately breaks the chronological order of next/previous.
Apple?
Is there a place I can file a formal bug report?

Available APIs for process and package management

Hello All and welcome to my Hello All:
Welcome to my inaugural post. I am a complete noob to Solaris (although I have been using Linux for 5+ years) and am in the process of trying to get a handle on what local C/C++ APIs (if any) are available for management. Specifically, I am looking to find out about process and package management.
For process management, basically I would like to know is there some kind of interface to the the prstat application (ie. Memory and CPU utilization). Does something like this exist?
For package management, I am looking for the ability to add, remove, and query the package �database�. Correct me if I am wrong, but the Solaris package �database� seems similar to that of a Debian system (at least from the perspective that the informational files are stored as plain text in a well-defined directory [ie /var/sadm/pkg/]).
I have installed Solaris 10 on an x86 machine with a full installation; however, of the installed development kits (listed below) nothing jumped out at me.
-bash-3.00# ls -1d /var/sadm/pkg/*devel
/var/sadm/pkg/SUNWaspell-devel
/var/sadm/pkg/SUNWevolution-devel
/var/sadm/pkg/SUNWevolution-libs-devel
/var/sadm/pkg/SUNWgnome-a11y-base-devel
/var/sadm/pkg/SUNWgnome-a11y-libs-devel
/var/sadm/pkg/SUNWgnome-a11y-reader-devel
/var/sadm/pkg/SUNWgnome-a11y-speech-devel
/var/sadm/pkg/SUNWgnome-audio-devel
/var/sadm/pkg/SUNWgnome-base-libs-devel
/var/sadm/pkg/SUNWgnome-camera-devel
/var/sadm/pkg/SUNWgnome-common-devel
/var/sadm/pkg/SUNWgnome-component-devel
/var/sadm/pkg/SUNWgnome-config-devel
/var/sadm/pkg/SUNWgnome-desktop-prefs-devel
/var/sadm/pkg/SUNWgnome-file-mgr-devel
/var/sadm/pkg/SUNWgnome-hex-editor-devel
/var/sadm/pkg/SUNWgnome-img-editor-devel
/var/sadm/pkg/SUNWgnome-libs-devel
/var/sadm/pkg/SUNWgnome-media-devel
/var/sadm/pkg/SUNWgnome-panel-devel
/var/sadm/pkg/SUNWgnome-pilot-devel
/var/sadm/pkg/SUNWgnome-print-devel
/var/sadm/pkg/SUNWgnome-project-devel
/var/sadm/pkg/SUNWgnome-terminal-devel
/var/sadm/pkg/SUNWgnome-text-editor-devel
/var/sadm/pkg/SUNWgnome-vfs-devel
/var/sadm/pkg/SUNWgnome-wm-devel
/var/sadm/pkg/SUNWgnutls-devel
/var/sadm/pkg/SUNWjpg-devel
/var/sadm/pkg/SUNWlibexif-devel
/var/sadm/pkg/SUNWlibgcrypt-devel
/var/sadm/pkg/SUNWlibpopt-devel
/var/sadm/pkg/SUNWmozilla-devel
/var/sadm/pkg/SUNWmoznspr-devel
/var/sadm/pkg/SUNWmoznss-devel
/var/sadm/pkg/SUNWogg-vorbis-devel
/var/sadm/pkg/SUNWopenjade-devel
/var/sadm/pkg/SUNWopensp-devel
/var/sadm/pkg/SUNWpcsclite-devel
/var/sadm/pkg/SUNWpng-devel
/var/sadm/pkg/SUNWpostgr-devel
/var/sadm/pkg/SUNWPython-devel
/var/sadm/pkg/SUNWTiff-devel
I've placed orders for Solaris Internals and Solaris Performance & Tuning (that should arrive tomorrow), but I was hoping that someone could give me a gentle push (or perhaps a swift kick) in a general direction. :)
Thanks.

For process management, basically I would like to
know is there some kind of interface to the the
prstat application (ie. Memory and CPU utilization).
Does something like this exist?Not prstat (although you could 'truss' it and see some of what it's doing to collect the information). kstat is available with a C interface and through perl/shell. It has several CPU fields. It's certainly useful for monitoring, but read-only. I'm not sure what you're looking for in terms of "management".
Also 'dtrace' can provide tons of dynamic information, but that's not necessarily what you're looking for.
For package management, I am looking for the ability
to add, remove, and query the package �database�.
Correct me if I am wrong, but the Solaris package
�database� seems similar to that of a Debian system
(at least from the perspective that the
informational files are stored as plain text in a
well-defined directory [ie /var/sadm/pkg/]).Yes, although it's based on the SysV packaging system. I don't believe there's any API for it outside of the 'pkg*' utilities.
Darren

Standard BW reports for SAP HCM Performance Management

Hi all,
I'm preparing a blueprint workshop for SAP HCM Performance Management and the customer wants to see the reporting in BW. Does anyone have experience with standard BW reports for this HCM solution and could someone please provide me with screenshots of these reports?
Thanks!
Marijn van Amelsfort
SAP NL

Hi,
Did you get the solution?
I also have the same requirement but did not find any solution.I have posted a similar question on SDN.
Re: Require links for ESS , MSS and TMS
please reply if you have answer.
Thanks,
Ravi

Which parameters are required for generating a solution manager key?

Hello All,
I generated a key in Solution Manager, to install a SAP NW 2004s SR1.
But I receive an error during the installation from the SAPINST:
"SAP Solution manager key for the instance number... is invalid ".
I already changed the parameters for generating the key, changed the instance number, hostname, but I still receive the same error.
Could someone tell me which parameters exactly are required for generating a solution manager key?
thanks
Thomas

Dear Sri,
this is exactly what I have entered, I still get the same error message.
My entries in SAPINST:
SAPinst founds one system instance on the host with
the Instance number 00,
the Instance name SCS00.
And ask for the Central Instance parameters:
there I enter 01 for the central Instance number,
the hostname
and the solution manager key generated for the instance number 01!
best regards
Thomas

I could wish for a plugin to manage to open a LibreOffice calc sheet given as an URL in a HTML-page

Similar Messages

Maybe you are looking for