I couldn't send mail from my ipod.also couldn't browse anything

I couldn't send mail from my ipod.also couldn't browse anything.. its coming " smtp.gmail.com is failed"..

Try the standard fixes:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Delete the mail account from the iPod and recreate it
- Restore to factory settings/new iPod.

Similar Messages

  • Sending e-mails from an iPod Touch

    I ned to send ocaisional e-mails from my iPod Touch.  At the moment I cannot do so and get the error message that the sender address was rejected by the server.  I have checked the settings for e-mails and they appear to be correct.  I am able to receive e-mails.  If anyone can advise me as to how to overcome this problem, in simple terms please, i would appreciate it.

    Spearthrower wrote:I am trying to send them using the e-mail app.  It is the backup file for the N+otes app that has highlighted the problem  However, when I try to send other e-mails I also get the error message : "The sender address <my [email protected]> was rejected by the server" 
    I'd delete the lot and start again. It may be a simple typo - like btinternewt! Did you try the alternative outgoing server port? 
    You can click the white star next to this message if you think it was helpful.

  • Send Email from my Ipod

    I have problem to send emails from my Ipod. I dont know, am i st...., But there is always message" Can not send email the connection to the outgoing server"null" failed.
    How can i fix this, please....

    I am now getting this "null" message when trying to send mails using my yahoo account. incoming mails still ok and have previously sent via touch on this account. have tried deleting and then reinstalling but no joy

  • Error: Not able send mail from OWA 2010. When I send mail, the mails go to Drafts Folder.

    Error: Not able to send mail from OWA 2010. When I send mail, the mails go to Drafts Folder. I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send. 
    Screen Shot: http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
    Scenario: I have below configuration of exchange 2010 server Setup:
    1. Windows Domain Controller with Global Catalog on Windows Server 2008 which only for Windows 2008 Server Native.
    Server Name: WDC2010
    Domain: Blazex.Com
    2. Hub/Client Access Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
    After that installed the Hub/Client Access Exchange role servers.
    Server Name: HC2010.blazex.com (This is not a Addition Member server or ADC)
    Role: Hub and Client Access Server.
    3. Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
    After that installed the Mailbox Exchange role servers.
    Server Name: MBX2010.blazex.com (This is not a Addition Member server or ADC)
    Role: Mailbox Server.
    4. 2nd  Mailbox Server: It is installed on Windows Server 2008. As per Microsoft recommendation, I have just installed Windows Server 2008 and then join this computer to Blazex.com.
    After that installed the Mailbox Exchange role servers.
    Server Name: 2MBX2010.blazex.com (This is not a Addition Member server or ADC)
    Role: Mailbox Server.
    5. Client Windows 7: It is installed on Windows 7 Ultimate Workstation. As per Microsoft recommendation, I have just installed Windows 7 and then join this computer to Blazex.com.
    Workstation Name: WIN7.blazex.com
    Role: Workstation
    Error Description: I have installed everything correctly but when I tried to open the OWA and trying to send mail from OWA. The mails do not deliver and mails become saved in Drafts folder. I tried to re-send messaged from Draft also but not able to send. 
    Screen Shot (Same As Above): http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/Error%20-%20Not%20Able%20to%20Send%20Mail%20from%20OWA%202010.docx
    I don't know what I am missing but I think there is some configuration I need to do on Hub/Client Access Server (HC2010).  I tried to access the mailbox on XP Client system through OWA. I get the same problem as Win7.
    Can someone please help me on this?
    Thanks and Regards
    Shambhu

    Hi Subhash,
    I have done the troubleshooting but I didn't find any problem at server side. I will send you mail also with all EXBPA report and as well DC, HC and Mailbox servers' Application Log and System Log.
    Below are the questions's answers which was asked by you:
    1.     Please check whether you can send email via Outlook.
    I am not able to open the MS Outlook. Please check all details in this thread : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
    2.     Please run EXBPA to have a health scan.
    I have run the EXBPA and didn't see any critical Problem. I have took the screen shot and report. Please have a look in below screen shot link:
    a. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/EXBPA.docx                                                                            - Final Report
    b. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.BaseLine.200906270226501077.data.xml                        - Baseline Health Check
    c. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Connectivity%20Test.200906270223318201.data.xml      - Connectivity Check
    d. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Health%20Check.200906270125477730.data.xml            - Health Check with 2 Hr. Baseline option
    e. http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/ExBPA.Permission%20Check.200906270224343377.data.xml      - Permission Report
    The error which I received in EXBPA, that allready ignored by you and told that it is bug in EXBPA. Have a look here: http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/d4bb03bb-db84-4a8b-83ba-19937d7dcacf
    3.     Please check application log, whether any error event logged there. They could come from ADAccess related error or etc.
    I didn't see any ADAccess event on the server. For this I have left my lab PC open and I will check again.
    4.     We find that if mail .que gets corrupt, then this issue will occur, please try to move the affected user to another store and then test the issue.
    I am facing this problem with all users (7 users). Anyway I moved one user from one server Mailbox Database (2mbx2010) to Other Server Mailbox Database (mbx2010). After that
    a) Rebooted the Workstation
    b) Login successfully with same user.
    c) Delete the Old MS Outlook Profile
    d) Create New profile for same user without any problem.
    e) Tried to login in MS Outlook and got the same error. : http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/c491c5c7-7d6f-48ff-97fa-6bf83d94e53c
    f) Open the OWA successfully for Same user.
    g) Tried to send mail but again mail went to Drafts Folder.
    5.     I noticed that you test the issue after you close outlook. I recommend you to reboot your pc and then access
    mailbox via OWA to test the issue.
    I tried you suggested option, but sorry it also couldn't help.
    6.  You also check your disk space.
         All Servers have Enough Disk Space. Check the EXBPA Report.
    7. You may run EXTRA to get log information for further troubleshooting.
      Need more time for this.
    8. Please save application log, system log as *.evt file, then send them with EXTRA,EXBPA report to [email protected] .
       I have sent it as your mentioned mail address OR, you can get the mentioned log from below link also:
       a) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_APPLICATION.evtx           - DC/GC Application Log
       b) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/WDC2010%7C_SYSTEMEVENT.evtx          - DC/GC System Log
       c) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_APPLICATION.evtx              - Hub/Client Application Log
       d) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/HC2010%7C_SYSTEM.evtx                      - Hub/Client System Log
       e) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_Application.evtx                - Mailbox Application Log
       f) http://cid-31ba948d0da4d57e.skydrive.live.com/self.aspx/.Public/MBX2010%7C_System.evtx                      - Mailbox System Log
    There will be some error log you will be that the system is not able to communicate with DC/DC, MBX or HC at everyday around 3 AM or some time 6 PM Evening also. These error came because I have installed VM on Windows 7 Workstation and after 45 min or one hrs. if I don't work on PC, then pc goes to sleep. so you may ignore these alerts.
    I hope my answer will give you some clue and I expect more help from your side.
    With Best Regards
    Shambhu Sharma

  • Word couldn't send mail because of MAPI failure, Unspecified error.

    This issue is crossposted in Microsoft Answers Word and OUTLOOK.  I am posting here in hopes that someone at Mircrosoft may have a solution or at least elevate the issue to someone who does.
    http://answers.microsoft.com/en-us/office/forum/officeversion_other-word/word-could-not-send-mail-because-of-mapi-failure/f62678fe-ef1d-42b5-8cfe-1e43d6a1d609
    http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/word-couldnt-send-mail-due-to-mapi-failure/1f03cf74-9258-411b-9e2b-e41cb5006d71
    I dabble with VBA and write and maintain several amateur Word Add-Ins.  Accordingly, I have Word 2003, 2007, 2010 and 2013 installed on my PC.  They get along fine.  However, I am unable to "Share" or "Send" an open Word
    document as an E-mail attachment in any version!  In each case Word returns an error mesage "Word couldn't send mail because of a MAPI failure, Unspecified error (the same issue occurs with Excel and Powerpoint except the error dialog is a bit different.)
    Using Word 2003, I (CAN) "Send to (Mail recipient for review)" in which case OUTLOOK is opened with the document as an attachment.  I can also "Send to Mail Recipient" from Windows Explorer, in which case the Word file is attached to
    an OUTLOOK message, and I can create an instance of OUTLOOK and send mail from Word using VBA.
    I have repaired all Office versions.  I have removed the registry keys for all office versions and repaired all versions again.  I have run "fixmapi" until I am blue in the face. I have renamed the MAPI32.DLL files and ran sfc \scannow
    to ensure that the MAPI32.DLL file is not corrupt.  In view of these actions and in view of what I can do, something tells me that the MAPI files are fine.
    So what is this "Unspecified error?"  This problem is rife on the internet and most of the "canned" solutions have been marked "Answered" by some MS support engineer.  These "canned" solutions might have
    fixed the issue at one point, but they don't work now.  At least not for me.
    Thanks.
    Greg Maxey Please visit my website at: http://gregmaxey.mvps.org/word_tips.htm

    Hello Greg,
    I noted that there are 2 knowledge articles that describe scenarios where you may encounter this error.
    KB 291152 You receive a "Word couldn't send mail because of MAPI failure" error message when you try to send a Word document as an e-mail attachment in Word 2002
    http://support.microsoft.com/kb/291152/EN-US
    KB 929362 You cannot send a file by clicking Send in a different program when Outlook 2007 is running as administrator
    http://support.microsoft.com/kb/929362/EN-US
    Please let me know the following:
    1. What version of Outlook are you using?
    2. Do you have Outlook open when you attempt the File > Share > Email as attachment from Word? If not, does the error occur if you open Outlook, open Word and then try to send the email?
    3. If you close/reopen Word and then try the send again, do you get the same error?
    4. Are you running either Outlook or Word in an elevated mode?
    5. What happens if you start both Outlook and Word as "Run As Administrator". You may have to right-click each applications' .exe file to be able to choose the "Run As Administrator" option.
    6. Do you get the same error when using File > Share > Email as attachment using Excel?
    7. In Internet Explorer, open the Internet Options. On the General tab within the browsing history, delete your temporary Internet files and website files
    8. Does the issue occur in selective startup mode?
    Steps to setup selective startup mode:
    Click on the Windows Start button, in the Search box type msconfig and then hit enter. This should open up the System Configuration Utility. Make the following adjustments within each tab.
    Services Tab:
      - Check the option 'Hide All Microsoft Services'
     - Click on button 'Disable All'
    Startup Tab:
     - Click the button 'Disable All'
     - Go back through the list and enable any Microsoft items
    Click Ok. It will say “You must restart your computer for some of the changes
    made by System Configuration to take effect”. Hit the ‘Restart’ button.
    When the PC reboots try to run your test again.
    To return back to a normal boot launch msconfig again and choose 'normal startup' on the general tab, click Ok and then reboot the PC.
    Regards,
    Dennis

  • Can no longer send mail from other apps

    Problem:
    If I go into any app (other than Mail) and try to send a message (via email) and I either get nothing or some apps will say that "Mail needs to be configured in order to do this."  After doing a restore on my iPod touch (4th Gen., running the latest iOS5) I had only configured a few accounts under "Mail, Contacts, Calenddars", and *was* able to send mail from other apps just fine.  Now that I have 13 accounts I cannot; not only is Mail configured and working fine (by itself,) but I now only have one account with "Mail" activated, and it is indeed set as the "default account" in Settings anyhow.  This is frustrating since some apps depend on email to let me export its data but is also a nuisance since it makes it more difficult for me to share content with others.
    Has anyone encountered this bug and/or have a tip?

    It is possible the Evil Starbucks empire has blocked SMTP sending as an antispam measure. You would need to log in to your email server using the smtpauth protocol. For example, Earthlink has an smtpauth.earthlink.net server for secure sending, which I was able to use sending from any public AP. Possibly T-Mobile has a similar authorized server.
    But nowadays I just use Gmail, they make it easy and reliable to send from anywhere because they use a custom smtp port. Yeah, Gmail solved a multitude of problems with mobile sending.
    Aluminum PowerBook   Mac OS X (10.4.7)  

  • How to send mail from servlets

    m having troubles sending mail from servlets...
    how do you use the SimpleMailUser object needed in the session?
    a sample code on this would be of great help, thanks!

    <html>
    <body bgcolor="white">
    <font size=5 color="black">
    <%@ page import="javax.servlet.http.HttpUtils" %>
    <%@ page import="java.util.*" %>
    <%@ page import = "java.sql.*" %>
    <%@ page import = "java.io.*" %>
    <%@ page import= "sun.net.smtp.SmtpClient" %>
    <%
         String from,to,subject,msgbody,serverName;
         try
    from = request.getParameterValues("from")[0];
    to = request.getParameterValues("to")[0];
    subject = request.getParameterValues("subject")[0];
    msgbody = request.getParameterValues("msgbody")[0];
    serverName = request.getParameterValues("server")[0];
         catch (Exception e)          // Generally Speaking, an Error getting one of these
                                       // Values means that it wasnt passed in; inform the user
              out.println("You must call this JSP from this ");
              out.println("<A href=\"FormMail.htm\"> form</A>.<BR>");
              out.flush();return;
    %>
    Hold On A Moment while I try to Send Your Mail... <BR>
    <%
         out.flush();
         // Here are the real guts of the mail sending
         try
         sun.net.smtp.SmtpClient sm = new sun.net.smtp.SmtpClient(serverName);
         sm.from(from);
         sm.to(to);
         PrintStream msg = sm.startMessage();
         msg.println("To: ");     // Note dont use + for Performance
         msg.println(to);
         msg.println("Subject: ");
         msg.println(subject);
         msg.println();
         msg.println(msgbody);
         msg.println("==============");
         msg.print("This mail brought to you by JSP MAIL..from a user at IP ");
         msg.println(request.getRemoteHost());
         sm.closeServer();
         out.println("Your Mail Has Been Sent!");
         catch (Exception e)
              out.println("The mail couldn't be sent, probably because the mailhost wasnt set correctly.<BR> ");
              out.println("The error message I am getting is: ");
              out.println(e.getMessage());
    %>
    <BR>
    <BR>
    Click here to send another!

  • I cannot forward or send emails from my ipod this has just recently happened. Used to work before ok

    i cannot forward or send emails from my ipod this has just recently happened. Used to work before ok

    Do you have more than one mail account on the iPod?  For out-going mail, the Mail app will first use the outgoing server associated with the account and then go to the out-goings servers for other accounts.  To check go to Settings>Mail..>Outgoing Mail Server SMTP.  Some providers do not allow mail to be send for other than the from that providers mail address.  (e.h.,can' send AOL mail via a Hotmail outgoing server).
    To me is sounds ilke the APL outgoing server is not on line. Also try resetting the iPod, nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • Ipad 2 suddenly decided it couldn't send mail on mobile me smtp server any known fixes

    Ipad 2 suddenly decided it couldn't send mail on mobile me smtp server any known fixes?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try a Reset - iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    Or this - Delete the account in Mail and then set it up again.
     Cheers, Tom

  • Sending mail problem on iPod Touch

    Suddenly, and I mean suddenly, I cannot send mail from my Touch. It tells me that "sender address is invalid." I checked all my settings and my contact info and all is correct. Anyone have any idea what's going on? I can get mail but can't send without that warning message.

    If you can send mail from your mac, did you try to replace the account settings on your iPod, using this option in the info pane, advanced section? Then try again to send mails.

  • Cannot send mail from mac mail or Entourage

    Hi guys,
    Wondered if anyone out there can shed some light on this little problem.
    I use Entourage for my emails & all was working fine until yesterday. I can receive mail from all and sundry but I can't send anything. I subscribe to ntlworld internet service and if log onto my email through their webmail, then it's fine. I've tried sending mail from mac mail and I get the same problem. I've been onto microsoft support & gone through all the troubleshooting with Entourage. The Entourage techy suggested it was my internet provider blocking my emails as they think I'm a spammer?? I phoned ntl & they insist it's nothing to do with them as I can send/receive from the website. (If I send an email with the address @ntlworld it's fine, but any other address i.e. all my clients/mates etc just stays in my outbox.
    Nothing on any of my settings has changed so I'm at a loss what to do next.
    Any suggestions greatly appreciated.
    Thanks, Mel

    it may be that your server (internet provider) has just started blocking outgoing mails not authenticated by them.
    Go to your account set up...
    and fill in the following details.
    SMTP SERVER: smtp.mac.com
    then click on advanced sending otions...
    click on override default SMTP port... type 587
    click on SMTP servber requires authentication...
    use same setting as receiving mail server.
    try this...

  • Cannot send mail from my ipad

    I cannot send mails from my ipad, I have checked settings with my mail server and they tell me that everything is OK, they don't know what may be causing the problem, any ideas?

    TBS2.
    There is no way for anyone to know if your problem is identical to the problem reported by maria_diaz. She didn't mention anything about getting the "relaying" message. I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

  • Cannot send mail from any mail account

    I have a Mac Mini, late 2014 model, running OS X Yosemite version 10.10.2.   I have constant difficulty sending mail from any of my mail accounts; these are iCloud, Googlemail, Yahoo and a personal one which uses 123-reg.co.uk.  I am currently located in Greece, but have been having trouble for ages, even in the UK.  I can receive mail, but I don't seem able to send it.  Error message is usually simply cannot send mail using this server, select a different server.  However, when connection doctor is run, all servers appear to be connected and I am logged in.  Any ideas please?

    rosiehwilson wrote:
    Hi, not sure why that is relevant, but we arrived at the end of January this year.  Here is a screen shot of a recurring problem, although in this case Gmail is not connected to the internet, which it usually is.  Hope this helps.
    Your outgoing Gmail servers not working, everything else seems OK.
    So, what is not working for you (other than Gmail Sending)

  • Unable to send Mail from POP account

    I have an Iphone 4 and have upgraded the IOS from 5-1 to 6.1.3. Since then I have been receiving all my mails but i have been unable to send mails from my POP account. the notification "Cannot Send Mail. A copy has been placed in your Outbox. The receipient, "xxyyzz @ gmail . com " was rejected by the server" displayed. Please Help. the same thing happens when I configure my POP account on my Son's Iphone4, and there is no problem in receiving and sending mails from my Outlook. Please Help!!!!!
    Can i revert back to IOS5.1.1?????

    Contact your email provider and get the correct settings to use for the outgoing mail server (SMTP) on a mobile device. If it's email provided by your ISP, they have likely blocked email from outside their network from relaying to prevent spam.

  • Cannot send mail from .mac account in Entourage

    I am a new mac user so my troubleshooting skills are very weak. Until about one week ago, i was able to send mail from both my hotmail account and my .mac account. Now, i get this error (just on my .mac account):
    An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic.
    i read through much of the support articles, but did not find my specific error. can anyone help??
    thank you
    mknz
    MacBook Pro   Mac OS X (10.4.7)   new mac user
    MacBook Pro   Mac OS X (10.4.7)   new mac user

    it may be that your server (internet provider) has just started blocking outgoing mails not authenticated by them.
    Go to your account set up...
    and fill in the following details.
    SMTP SERVER: smtp.mac.com
    then click on advanced sending otions...
    click on override default SMTP port... type 587
    click on SMTP servber requires authentication...
    use same setting as receiving mail server.
    try this...

Maybe you are looking for

  • Error while creating transformation from DSO to InfoCube

    Hi Gurus,    When i am creating tranformation from DSO to InfoCube getting an error,        " The unit/currency 'Source Currency 0CURRENCY ' with the value 'space' is  assigned to the key figure 'Source Key Fig. ZAMT_PLC ' with the value    '8.50 ' "

  • I give up: Trying to change to app with In App Purchase

    This should be such a simple process and procedure. I have an app priced at .99 in iTunes. I have been trying to change it to a free download, first 7 pages of app free preview, with an In App Purchase of .99 to view the rest of the app. Have followe

  • How to install IIS in OBI

    It needs IIS before install BAM. But how to install IIS in OBI XP? Although I can find some VM image which already installed BAM. But I think this is not convenience. Thanks, Melody

  • Weird keyboard problem - "7" "U" "J" "M" keys not working properly

    The "7" "U" "J" "M" keys work sometime. I took it in to an apple store for repair. They replaced my keybord ($163 includes labor). I am still having the same problem. Also, my password contained one of the non-working keys (bummer), so I purchased an

  • Can the Q10 be used as a FAX

    Is there any way that I can send a Fax using my Q10.  I am a novice so go slow on the deails since I will probably have trouble keeping up with  you experts. thanks in advance Mark P