I covered my camera port on my macbook pro, however people on-line still inform me that they are still able to see me

I covered my camera port on my macbook pro, however people on-line still inform me that they are still able to see me

Use a alias, but you might have to use a zip code that matches the location used.
Also if you click the right button there is a way to bypass the registration, like register later or something, Apple has it hidden. Also to bypass the internet connection to send the registration off.
Never place your name on a Mac or PC, it's spread throughout the entire machine, in emails, on the network in plain sight etc.

Similar Messages

  • How can I please manage to get my contacts back in my MACBOOK PRO? On synchronizing with my iphone over icloud they are completely disappeared. Help is very much appreciated. Thx in advance.

    How can I please manage to get my contacts back to my MACBOOK PRO. They are completely disappeared after synchronization under iCloud with my iphone s4. Help is very much appreciated. Thx in advance.

    Unfortunately there is obviously no one who could help.
    I simply logged in over icloud.com and copied the contacts onto my monitor screen..... :-( Not the best idea, I know, but in fact I can look up my contacts.
    someone there with a better help???????????????????

  • My Thunderbolt-port equipped 15" Macbook Pro (Early 2011) works with other monitors but not with my Thunderbolt Display.

    I just got a thunderbolt monitor and excitedly, I plugged my early 2011 thunderbolt port equipped 15" Macbook Pro (running 10.8.2) into it and... no image on the monitor.
    Ok, so I know that the TB display works because I plugged a mid-2012 13" Macbook Pro into it (running 10.7.5) and it works perfectly. In fact, I'm using it to type this message right now.
    Other details:
    - in both the displays preference pane and about this mac/system info, the 15" mbp recognizes the display, yet... no picture either clamshell open or closed. restarted with it plugged in and not plugged in, no difference. also? sound comes through the monitor.
    - ALSO, i plugged in a mini displayport monitor into the 15" port, and it displayed fine, so the port seems to be doing something.
    see my conundrum?

    It should just work - if it's not working with your 2011 model (works just fine with my 15" late 2011, right out of the box) I would get in touch with AppleCare as soon as possible and see what the senior techs may have to say...
    Clinton

  • My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

    My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

    I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
    http://www.apple.com/retail/geniusbar/

  • Why can I no longer use my exterior speakers connected to the USB port on my MacBook pro

    QuestionWhy can I no longer use my exterior speakers connected to the USB port on my MacBook pro ?

    Have you checked the Sound Preferences under the System Preferences and set it to USB speaker for the sound output? Sometimes it can change on its own or after and update of an App or the OS?

  • How to install software (on CD) for Sony DCR-SR68 video camera on my 2009 MacBook Pro

    How do I install software for a Sony DCR-SR68 video camera on my 2009 MacBook Pro? The manual that came with the camera says the software cannot be installed on "a Mackintosh", that I should contact Apple.

    BrianKeyes wrote:
    The manual that came with the camera says the software cannot be installed on "a Mackintosh"
    I think that's pretty clear, don't you? (And, if it does say "Mackintosh", I'll eat my bowler hat.)
    You can't use the supplied software with Mac OS X. Either install Windows on your Mac, if you wish to use this software, or find out (eg, by googling) what other Mac users do with this camera.

  • Should the USB port on my MacBook Pro charge my phone?

    Should the USB port on my MacBook Pro charge my phone?

    wait i misread as iphone
    well it depends what type of phone you have

  • Is anyone having a problem connecting 400 firewire thru an adapter for the 800 firewire port on a Macbook Pro 2011? It does a kernel panic every time I connect it. Is there a "proper way" to connect it?

    Is anyone having a problem connecting 400 firewire thru an adapter for the 800 firewire port on a Macbook Pro 2011? It does a kernel panic every time I connect it. Is there a "proper way" to connect it? Just in case it makes a difference I am trying to hook up an Avid Mbox Pro for Pro tools.

    What is the part number and model of Firewire adapter?
    I have used them in the past without any problems whatsoever.
    Allan

  • USB ports in my macbook pro stop working

    For a few months now the USB ports in my Macbook Pro stop working. The mouse is unable to move the pointer, therefore, I have to use the trackpad to select things. Then, when i try to shut it down it refuses to shut down, so I have to hold the on/off button to turn it off. When I turn on the laptop, the problem goes away. It's been happening more often for the last few weeks. Is there a problem with the software or is it the fact that I never used a base to raise the laptop, until recently, to let air in below so it doesnt heat up so much?
    Any help is appreciated.

    Hi h,
    Try an SMC Reset: http://support.apple.com/kb/HT3964

  • My nano will not charge. Which is correct port on my macbook pro for this?

    my 6 th. generation nano will not charge plugged into my computer. Which should be the correct port on my macbook pro for this?

    Any standard USB port should do the job.  Have you tried using a different cable?
    B-rock

  • How can you safely clean your magsafe and other ports on a macbook pro?

    How can you safely clean your magsafe and other ports on a macbook pro?

    MagSave, yes. Other ports cannot be safely cleaned although you can blow air in to clean out dust.

  • Lighting bolt port shuts down macbook pro

    lighting bolt port shuts down macbook pro once the cable is pugged in. What is the cause of this problem

    Hi reginaldt,
    If your Mac unexpectedly turns off when you plug in a cable (unclear if you are describing a USB Lightning cable or a Thunderbolt cable) and you have checked to make sure there is no debris in either the cable jack or port, you may want to try resetting the PRAM and SMC:
    Apple Support: About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    If the issue persists, you may find the troubleshooting steps in the following article helpful:
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
    http://support.apple.com/kb/TS4636
    Regards,
    - Brenden

  • Provide USB port power during Macbook Pro Sleep mode

    My old Macbook used to go to sleep, with lid closed, and charge my phone via USB cable.
    With my i7 2010 15" Macbook pro however, I cannot see how to configure this same feature. Basically when the lid closes, the unit goes to sleep, including the USB ports.
    In order to charge my phone, I am forced to leave the computer on.
    This seems like a giant step backward for a traveler like myself, one of the main reasons I made the investment in the new Macbook Pro was for the great new battery life.

    I have the same problem. This was working, but it seems that after the last security update all USB ports are turned off completely, so my iPhone and iPad (both of which I leave connected to the USB ports) do not get charged. This is a big deal with my iPhone.
    Is there a configuration parameter on my MBP I should check?
    Thanks!

  • Have macbook pro with OS X yosemite 10.10.1 that i need step by step procedures to clean so I can give it to someone else, need help

    have macbook pro with OS X yosemite 10.10.1 that i need step by step procedures to clean so I can give it to someone else, need help

    Before you sell or give away your computer, in addition to the steps listed in this support article, take these steps:
    1. Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
    2. Reset the PRAM and the SMC, which might contain personal information.
    3. If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
    4. If you activated FileVault in OS X 10.7 or later, turn it off.
    5. If you use Boot Camp, the partition must be deleted.
    6. If you created any other data partitions on the internal drive, remove them in Disk Utility.
    7. If the machine has an internal hard drive, erase the one remaining data partition with the option to zero out data. An SSD doesn't need to be zeroed.
    You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by starting up in Internet Recovery mode (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
    If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer to the buyer.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
    The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either. The buyer will have to purchase them.
    Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

  • On my old ipod I had a different user id and pass word.  I would like be able to transfer all my music to my macbook pro and iPod.  How do i do that?

    On my old ipod I had a different user id and pass word.  I would like be able to transfer all my music to my macbook pro and iPod.  How do i do that?

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

Maybe you are looking for

  • Cannot sign in iTunes, Cannot sign in iTunes

    At my Iphone , Appstore , I cannot sign in Itune account. It kept saying my ID or Password is incorrect..This cannot be, as I can sign in on this community wt this ID & Password!

  • How do I get central error notification in one PC from network PCs

    We were using labview 2011SP1 in multiple setup, So I want the central system should popup if any error occured in network setups.  Kindly explain me how to pass error message over network.

  • HT2509 How to use duplicate cleaner for I Photo?

    I downloaded duplicate cleaner for I Photo and could not get it to work. When it posted to go to Library in finder and I do not have library listed but I do have pictures listed (which are files) so it would not work when I cloicked to activate the c

  • Defining a table field as radiobutton

    Hi experts, I have a client table with two fields defined as char 1. Now, when creating the screen for SM30, I want these two fields as radiobutton. In the layout, I have created them as radiobutton but now, I don't know how to group them. It underst

  • How to set a Caption/title in ALv

    Hi frnds, Can you tell me how to set a caption/title to a ALV grid. Regards Anuj