I create my keynote on my computer with keynote 09 version 5.3 and now it says I cannot oopen it without a new version???

Having created a keynote presentation on my desktop in keynote 09 version 5.3, suddenly it says it won't open without a newer version???what?

Hello valrolfer,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Upgrade notification message when opening an iWork document
http://support.apple.com/kb/TS1060?viewlocale=en_US
Best of luck,
Mario

Similar Messages

  • My daughters iPod touch 4th gen has been disabled from her locking it with a password,forgetting the password,and now it says disabled connect to iTunes .  The problem is the computer it was set up on is no longer operational.

    I tried to use iCloud to restore but she never set up iCloud. I tried to wipe it with find my iPhone but she never set that up. I put the iPod into recovery mode and connected it to an iTunes account on a different computer but it does not pick up the iPod. When I connect it to iTunes not in recovery mode it says to unlock the iPod before it can connect to iTunes. I don't know where to go from here besides blowing it up or putting it in a microwave. Please help. Thank you.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT1695 why would my new computer with windows 8 set up fine and now all of a sudden I cannot connect to the internet on my IPaD

    I have a new computer an Dell Inetel Celeron 2020 with Windows 8.  I had interent connection on my old desktop and to my Iphone and Ipad, however now I cannot get my Ipad to connect to the internet whatsoever.  i have messed with this since Wednesday of last week and I am exhausted from it.  Please help.

    So just the ipad cannot connect to the network? Does it connect to any other network?
    Try this:
    Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
    Go to settings, turn wifi off. Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
    Go to settings/genreral/reset/reset network settings. Then try to connect to network.
    If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
    If problem persists, then check for firmware updates on your router.(you check router manufacturer suppot website for downloads and instructions).
    Wifi Settings greyed out or dim
    http://support.apple.com/kb/TS1559
    Recommended wifi settings
    http://support.apple.com/kb/HT4199

  • How can I edit an iMovie 10.0.3 project on a different computer with an older version?

    I am trying to caption a video using the Titles feature. However, 10.0.3 has a bug that won't allow font changes in titles, which is making the captions inconsistent in terms of size and font, which looks terrible. How can I fix this? Is there any way to share the project with a different computer with an older version of iMovie, to make the edits there? So far, the video will transfer but the other project files (including the captions) won't open in the new version.

    You can't use a project created in iMovie 10 with earlier iMovie versions.  If you are only adding titles you could always re-import the video into a Mac running an earlier version of iMovie or share the iMovie 10 video to file and import into the earlier version.
    Some titles in iMovie 10 do allow changing font and size though.  Its a matter of trying out the various options.  If you are running Yosemite its worth upgrading to version 10.0.6 which I think improved title adjustment options as well as a number of other things.
    Geoff.

  • "Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

    Team,
    I am trying to Install Exchange on my Lab, getting below error
    message.
    The Schema Role is installed on Root Domain and trying to install
    exchange on Child domain.
    1 Root Domain - 1 Child domain. both are located on single site.
    “Setup encountered a problem while validating
    the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
    replication to complete.”
    Followed below articles:
    http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
    http://www.petenetlive.com/KB/Article/0000793.htm
    transferred the schema roles to different server on root domain, still no luck.
    can someone please help me.
    regards
    Srinivasa k
    Srinivasa K

    Hi Srinivasa,
    I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
    1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    After finishing this,
    2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
    3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
    4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
    5. Finally, run the setup program
    Hope this will help you
    Regards from Visit ExchangeOnline |
    Visit WindowsAdmin

  • I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel

    I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
    When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.

    StevenD: FYI, I did NOT give you the one star rating. I would never do that!
    StevenD wrote:
    Ow. Someone is grumpy today.
    Well, this is an assignment, so it is probably homework.
    Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
    This would make no sense unless all of it was just covered in class!
    This is not a free homework service with instant gratification.
    OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
    "...but have no idea where to begin".
    open notepad.
    decide on a format, possibly one line per indicator.
    type the document.
    close notepad.
    open LabVIEW.
    Open the existing VI with all the indicators.
    (are you still following?)
    look at the diagram.
    Who made the program?
    Does the code make sense so far?
    Is it a statemachine or just a bunch of crisscrossed wires?
    Where do you want to add the file read?
    How should the file be read (after pressing a read button, at the start of the program ,etc.)
    See how far you get!
    Message Edited by altenbach on 06-24-2008 11:23 AM
    LabVIEW Champion . Do more with less code and in less time .

  • How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some

    Hi
    As my topic says
    How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some custom presets?
    Assume you have Flash Builder 4.5, CS Extension builder 2.0, Xcode 4.5.1 running under MacOS 10.8.

    I understand why you need updated running headers in your book. To a sighted reader these serve as a guide to where you are and help you find things quickly.  In addition, if you are exporting your data to XML or HTML from the tagged PDF it would also be important to have these in the proper location. 
    But for accessibility purposes, it doesn't have to be there because the screen reader reads everything in linear order, line by line.  No one is looking at the page.  A user listening to the screen reader read the page is going to hear this heading, just before the actual word itself. So they will hear the first word on the page twice.  It's not the end of the world if it's there, but such headings are not necessary for accessibility unless they are not repetitive and contain information that is not otherwise available.
    So I would say, fine if you need them or want them there, it's just one word. 
    I think you should try exporting your book to PDF (or even just a chapter of the book) and look at the tags panel in Acrobat to see if you are getting the result you want.  I can't tell you exactly what you should do to get those results, you are using a plug-in I don't have. 
    I can tell you I didn't have to add the headers to any article at all, they just automatically export if the other articles in the file are added and you don't select the header style option "not for export as XML."
    You may not experience the same results with your plug-in, but I think it will probably work the same way. 
    Give it a try and best of luck.

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • TS1389 Authorizing a computer with the latest version of iTunes

    Hello, I am trying to authorize my computer with the Apple ID so I can download some songs onto my computer, but the support FAQs show me old answers that no longer apply to the new iTunes updates.. so can someone please tell me how to authorize my computer with the latest version of iTunes?

    If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
    If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (90888)

  • HT1386 This article seems to be based off of an older version of iTunes. With iTunes 11 I have no left side column. The screen shot is not what is on my computer with the latest version of iTunes.

    This article seems to be based off of an older version of iTunes. With iTunes 11 I have no left side column. The screen shot is not what is on my computer with the latest version of iTunes. I need help putting music and pictures on my new iPad from iTunes, the new iPad and latest version of iTunes. Thank you.

    On iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC - it should then look similar to that article.
    Syncing music : http://support.apple.com/kb/HT1351
    Syncing photos : http://support.apple.com/kb/HT4236
    Note that synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync - so you need to include all the photos that you want on the iPad from your computer in each photo sync.

  • I created a spreadsheet on my mac with numbers, and now it tells me  I have to buy a newer version of numbers to access the spreadsheet I created with the old program.  if I wanted problems like that I would go back to using windows

    I created a spreadsheet on my mac with numbers, and now it tells me  I have to buy a newer version of numbers to access the spreadsheet I created with the old program.  if I wanted problems like that I would go back to using windows

    Hi sar23,
    You may have inadvertently created or edited the document in the new Numbers 3.0 (which is free; you don't have to buy it) and are now trying to open it with the old Numbers 2.3.
    Both versions can be on your Mac at the same time, and can run at the same time.  The icons are similar so it's easy to confuse them (old on top here, new on bottom).
    The new Numbers 3.0 is in your Applications folder. The old Numbers 2.3 should be in a subfolder in the Applications folder named iWork '09 or similar.
    If you accidently edited an old document in the new version and want to take to take it back to the old version, you can export it:
    SG

  • When i try to set up facetime with my Apple ID it does not let me saying it cannot verify my account?

    when i try to set up facetime with my Apple ID it does not let me saying it cannot verify my account? if i change my ID on the ipad deos it change it on my computer aswel?

    Hi
    I would try this since Apple TV is built to allow multiple Apple Ids
    On you Apple TV
    General > Settings >Itunes Store > Add New Account (put yours in here)
    Then Switch account to your Apple Id
    Cheers

  • Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Hello surig84,
    Thank you for providing the details of the issue you are experiencing when syncing your iPad.  I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore?

    When I plug my iPhone into my computer to sync my iTunes I get a message that says "iTunes cannot read the content of the iPhone" and wants me to restore my phone back to factory settings. Any suggestions so that I don't have to restore? I have all of my stuff backed up on iCloud but I really don't want to go through the hassle of wiping it clean and putting everything back on.

    This is a post from a user named edgar999 and it worked PERFECTLY:
    "OK - this is how it works:
    In order to backup from iCloud you cannot use iTunes!
    Therefore disconnect your device from your computer.
    Turn on your device and go to Settings and then go to General.
    At the bottom of this submenu there is a buttom "Reset"
    If you push that buttom you see 6 different Erase settings to chose from!
    Chose "Erase All Content and Settings" because this will wipe everything from your device and will let you restore from iCloud!  (I tried the top "Reset All Settings" but that did not let me use iClouds afterwards!)
    Once you pushed that buttom your device will be wiped clean and after some time you will see the Device Welcome Screen like on a new device!
    After choosing your location you will be asked to setup your WiFi-conection. After  you joint to your Wifi you will be given the choice to restore the iPad from a backup from the iCloud. Choosing this backup will prompt you with your apple ID and password.
    Restoring from a backup can take some time.  The process uses your Wi-Fi connection to download settings, content and data.  If you had a lot of content on your device, this can take a while.  The restore screen should give you estimates at each stage of the restore process, starting with restoring the settings and then booting into the iPad.  When the iPad home screen appears, the device will continue the restore process by downloading all of your applications.
    If you are restoring from a backup because you have run into problems with your device that can only be solved by restoring it, you can first choose your latest backup. If you still have problems, you can move on to the next latest backup, repeating the process until (hopefully) the problem is cleared."
    THANK YOU edgar999!!!!

  • HT201210 I started update connected to my work computer....it started update and now it is asking me to connect to Itunes, which I have but my work computer doesn't have my Iphone information..... I can't use my phone now when I start up it says connect t

    I started update connected to my work computer....it started update and now it is asking me to connect to Itunes, which I have but my work computer doesn't have my Iphone information, it says I have the latest software, my only option is to "restore phone" which I don't want to do here at work as none of my apps or music are showing up ..... I can't use my phone now when I start up it says connect to itunes.....

    Mozilla has nothing to do with a Microsoft product activation key.
    That "test" page should be viewed in Internet Explorer and not with Firefox, as it may use ActiveX which isn't compatible with any Mozilla product.
    [https://support.mozilla.com/en-US/kb/ActiveX]

Maybe you are looking for