I created a custom ringtone that shows up as a ringtone but isn't on phone!

I created a custom ringtone, 22 seconds. All went well - it appears as a ringtone in my itunes music, and in itunes, under my phone (3g), as a ringtone. After several attempts at syncing (have never had a problem syncying anything), it does not appear under settings, general, sounds, ringtones. Can anyone help?

I think i've found the answer
In "music" my ringtones had also been added but with a "!" next to the ringtone. When you click on this the message reads something like "cant find location"
If you delete all the ringtones in "music" (the ringtones in "ringtones" don't get deleted") then sycn the phone then all my ringtones transfered to my Iphone
Yay

Similar Messages

  • How to create a text tag that shows up in a file but not on the sceen.

    I need some help, I'm a newbie with enough skill to be dangerous.  If someone can point me in the right direction has to how to use the F keys to apply the tagging mentioned below and the direction of how to do the tagging and make the tag invisible
    in a text editor but not the text file.  That would be great.  If you wish to show some code examples that's OK, but if not I can stumble through and learn while doing it from your directions on how to get it done.
    I will start with an example of what I'm trying to do; using the old desktop pub program Ventura.  They had (what I'm calling a tag) tags in from of ASCII text in a file to tell the program what it was and what to do with it, I. E.; "Title@this
    is the title text" the next line could be "Body@this is body text".  When loaded the "Title@" would not be there on the screen.
    I'm trying to create some text that uses a similar concept but not for formatting of text like Ventura. 
    I want to be able to highlight some text in an editor and then have it place some sort of tag for the highlighted text so that I could use it to do something upon that text and only that text; in concept the text "Bob Brush was a painter." I would
    highlight Bob Brush and somehow assign a tag that would be "name" and then highlight "painter" and be tagged with "job".
    The text file would then have something in it to distinguish "Bob Brush" and "painter" as what each is name and job.  (as a note I'm not trying to make a database or form just using this simplified concept to get my idea across
    because I get to wordy).
    Thanks in advance BK
    blk

    Hi bik,
    >> how to use the F keys to apply the tagging mentioned below and the direction of how to do the tagging and make the tag invisible in a text editor but not the text file. 
    It is unclear to me. Like you mentioned F keys, how does it work for?  And Could you show us some code with a simple sample or a capture? It could be better to help us understand more.
    In addition, I found a related thread
    Tag editing in a WPF TextBox. Not sure if it is useful for you. Thanks.
    Have a nice day!
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can I create a custom formula that checks if a PC file exists? (CR10)

    Post Author: lgayosso
    CA Forum: Formula
    Hello,
    I need to create a formula that validates whether a PC file exists or not to display a message ('File Found' or 'File not found'). I created a custom formula that displays the appropriate message based on a report field composed of the FilePath + FileNameWithExtension that works correctly if the field includes a value or not (Basic Syntax below):
    If {ctDocumentImages.ImgPath} <> ""  Then    Formula = "File Found"Else    Formula = "File not found"End If
    Now I want to validate that the {ctDocumentImages.ImgPath} value corresponds to an existing file; that is, I need to check that the file specified at {ctDocumentImages.ImgPath} location truly exists to determine that the file is actually 'found'. How can I accomplish this?
    Any help is greatly appreciated,
    Lucio

    Post Author: lgayosso
    CA Forum: Formula
    [email protected]:
    ( my file connection name was CrystalReports_Reports.File Name)  I have generated a report, that shows all my rpt file names, size, last updated.... etc )
    Go to database expert, create new connection, select file system data, your starting directory will be
    genplex\E\JEMS51_Server\Imaging\Int\2007\.....  you can then report on the file names found in that directory / subdirectory, etc...  When creating the link you can select all files, or just *.rpt  for example
    Ok, so you define more than one connection on your report to be able to access the File System Object, right? The problem is that my reports are generic and meant for distribution for customers where no generic base folder will exist. The value of the starting directoy is then unknown, FilePath+Name then can be any value.
    Lucio

  • How to create a popup window that shows detail information when press submi

    hi,all
    how to create a popup window that shows detail information when press the submit button ?I mean,when I press the button "Sumit"there will appear a popup window that shows the detail information you typed before.it means are u sure to submit,it is like some confirmation window.
    how to do achieve this ?help plz .
    best regards
    hlee
    Edited by: hlee on 2011-4-15 上午1:26

    hey,vee
    thanks for your response,but i had already read this thread before i put up a new question.any way,thanks.
    best regards
    hlee

  • My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

    My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out.

    I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out. I am trying to determine what is wrong with the drive.
    I need the data on the drive and it won't show up in Disk Warrior. I have tried different Mac's and different USB cords only to find the same outcome. When selected in Disk Utility the information read as such...
    Disk Description : WD Elements 1023 Media                      Total Capacity : 500.11 GB (500,105,740,288 Bytes)
    Connection Bus : USB                                                               Write Status : Read/Write
    Connection Type : External                                                     S.M.A.R.T. Status : Not Supported
    USB Serial Number : 575837314135304D36373132        Partition Map Scheme : Unformatted
    As the drive shows in Disk Utility there must be some life left in it surely. There is a possibilty that the physical connection between the USB cord and the external drive is damaged but since the drive shows up I believe it's unlikely... before I give it to the pro's is there anything else I can do to diagnose the issue?

    Hello,
    I have just experienced the same thing!
    Although my external drive shows in Disk Utility, it does not show in Finder.
    And the Verify/Repair buttons are also greyed out.
    Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
    I was wondering if you solved your problem, & if so, would you share your solution.
    I´m afraid to Erase in case I lose all my Data on the drive.
    Thanks in advance for your reply!

  • I have a ipod touch that shows wifi in the settings but i can not click to turn on to access my wifi

    i have a ipod touch that shows wifi in the settings but no way to turn on wifi or access wifi

    Hi chevy_dude13!
    I have an article here for you that addresses this issue:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Why i cannot change ringtone on my iphone?there is a tick on the changed ringtone but when ringing the phone still the old ringtone is ringing.my phone is iphone 4s

    there is a tick on the changed ringtone but when ringing the phone still the old ringtone is ringing.my phone is iphone 4s

    ashibobytariq wrote:
    Same thing happened to me, m still searching the solution, plz let me kno too if u find any wayout.
    If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • All websites I visit everyday are blocked by a virus that appears to be from Mozilla (but isn't) and wants personal info to unblock the parent control. My viru

    I tried to go to websites I visit everyday and they are all blocked by a virus that appears to be from Mozilla (but isn't) and shows mozilla logo and said my website was blocked by Mozilla parent control and you have to sign up for it. It asks for all the personal info that you NEVER give online so I knew it was a virus. I am writing this in safe mode. My Vipre will not pick up this virus and Malware bites won't either. I deleated Mozilla and reinstalled it but it didn't work.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • How do I create a custom screen to show after a person logs in we are using windows 7

    I have been asked to create a custom welcome screen that would load after a person logs into their computer. This screen is to have links to applications.  But I need this to show after they log in and before they see their desktop. and I
    need it to be full screen size.
    this is mandatory:
    I need this to show up AFTER people have logged in, and b4 they see their Desktop.  auto adjustment to fill the screen  and the screen will have multiple images with them being hyperlinks to the various applications. The kicker is we
    are running windows 7.  Of course one of the links will go to the desktop.(basically shut down the window screen)
    I seem to recall there is a way of doing this using group policy to trigger a screen and possible using HTA or VB6 method or a scripted page but I'm not sure how to accomplish this...
    This is coming from upper upper management  and they have it mocked up in access 2013.
    How do I do this or even accomplish this screen for windows 7.
    PS:
    I realize that windows 8/8.1 has this type of thing built in, but the company is NOT ready for windows 8/8.1

    I built a System Message HTA for my previous employer that was used in a computer lab setting. It was a nice way to inform the users about things happening in the lab, as well as a nice way to ensure people knew who to contact if there were problems.
    The HTA lived on a network UNC and each computer had a shortcut to the HTA in their All Users Startup folder (C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup). While you could push the shortcut with GPP, likes the others recommended, that's
    about all you should do with Group Policy. This was neat - I had the HTA run custom .cmd files (in a hidden window) when it loaded (the Windows_onLoad subroutine) and then when it was closed by the user (button press that called an ExitProgram subroutine).
    This allow me to capture who was logged on, how long the HTA was open, and what computer they were using. In a computer lab such as that one, it was nice to have additional way to track who was using what computer and when. Good luck and let us know if there
    are any more questions - I really enjoyed that project.
    Edit: Added additional info.

  • Trying to create a FMS query that shows available stock quantity on each Sales Order line

    Using SAP B1 v 8.82
    I realize that I may be going about this in completely the wrong way.  Here's my code:
    SELECT (T0.OnHand - T0.IsCommited + (SELECT SUM(ISNULL(T3.U_BO, 0)) FROM RDR1 T3 INNER JOIN OITM T4 ON T4.ItemCode = T3.ItemCode WHERE T3.U_BO > 0 AND T3.ItemCode = $[RDR1.ItemCode])) [available]
    FROM OITW T0
    INNER JOIN RDR1 T1 ON T1.ItemCode = T0.ItemCode
    INNER JOIN ORDR T2 ON T2.DocEntry = T1.DocEntry
    WHERE T0.WhsCode = 'ATL' AND T1.WhsCode = 'ATL' AND T2.DocNum = $[ORDR.DocNum] AND T1.LineNum = $[RDR1.LineNum]
    GROUP BY T0.OnHand, T0.IsCommited
    There is a UDF that I call upon in the RDR1 table called BO.  I created this field so that if a person wants to wait for a new batch they can "backorder" it.  In another UDF called "Available" I set up a user-defined value based on the above query.  The end result should be that whenever someone enters an item, the query finds the level of stock in the warehouse, subtracts the amount already committed, and adds back in any backorder quantities on other orders for the same item.  For example, say there's 1000 units of ITEM1 in stock, 2000 are ordered on SO # 1 and 500 are ordered on SO # 2.  The salesperson who created SO # 1 wants to wait for a new batch and types "2000" in the BO field.  I try to enter a new SO # 3 for 300 pieces.  When I key in ITEM1 on the first line, the field "Available" should update to say "500" (1000 - 2500 + 2000 = 500).
    It seems to be working, but only after the document is added.  In the example above I enter SO # 3 with a qty of 300 and when I go back to that SO I see that "Available" shows 200.  Ideally I'd like to see it say 500 while I'm working in the SO before I add it. 

    Edit2: Okay it so it works fine for any items that have a history, but it seems that if the item hasn't ever been on a Sales Order (i.e. it's not found in the RDR1 table) I get "no data found".  How can I make it simply return OnHand - IsCommited if it doesn't exist in the RDR1 table, but do the below query if it does?
    Actually that's not true.  I've got it working now.  I changed the query a bit and the update trigger, and it feels like it's working exactly like I wanted.  Query below if you're interested.
    /*Available FMS Sales Orders*/
    SELECT (T0.OnHand-T0.IsCommited+(SELECT SUM(ISNULL(T3.U_BO, 0)) FROM RDR1 T3 WHERE T3.ItemCode = $[RDR1.ItemCode]))
    FROM OITW T0
    INNER JOIN RDR1 T1 ON T0.ItemCode = T1.ItemCode
    WHERE T1.ItemCode = $[RDR1.ItemCode] AND T1.WhsCode = 'ATL'  AND T0.WhsCode = 'ATL'
    I have it on Auto Refresh -  When Field Changes "Document Total" - Refresh Regularly.
    Edit1: fixed grammatical error.

  • I have synced by I-phone to I-tunes to sync custom ringtones but they do not show up on I-Phone.  They are in the syncing que in I-tunes but not on phone.  Can someone help here.

    I am having problems syncing the I-Phone ringtones from I-tunes to the I-Phone.  These are custom ringtones and they do show up in the I-tunes ringtones and syncing seems to work but they are not on the I-Phone?

    1. CC 2014 uses different folder for CEP extensions. If you installed both CC apps and CC 2014 apps, Extension Manager CC will install CEP extensoins to both "~/Library/Application Support/Adobe/CEPServiceManager4/extensions" and "~/Library/Application Support/Adobe/CEP/extensions". Please check if you can find your extensions in the latter folder.
    2. Flash based extensions are no longer supported by PS CC 2014. So if some of your extensions are Flash based, even if they are installed to the folder above, PS CC 2014 will not load them. You have to install their HTML based counterparts. Refer to
    http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html , http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html and http://blogs.adobe.com/crawlspace/2014/06/2014-release-of-photoshop-cc-faq.html#plugins

  • Is there a way to create a Smart Mailbox that shows Sent emails only?

    Hi there,
    I am trying to find a way to create a smart mailbox that only shows emails I have sent.
    If I receive 20 emails today, 10 yesterday say, I have a Smart MB where I have set up emails received today, another SMB for emails received yesterday and another SMB for emails I've received in the past week. I can very easily see what has come in during the last few days or whatever.
    What I also have are rules that move all emails received and sent to specific folders. The idea is that I will have nothing in my INBOX. The problem is that although it's easy to set up views to see what emails I've received on any day using the calendar option, I can't see a way of doing this to see what emails I've sent.
    So, if I receive 20 emails today and I replied to 3 of them, those 3 will get sent to whatever folder I've allocated for them - I put all emails TO/FROM in one folder for each email address. This way I don't have 2 email folders TO and SENT for each recipient.
    My problem is that I want to ONLY look at what I've sent today or maybe yesterday etc. if I can set things up the same way as receiving emails, But I can't seem to do this.
    Seems strange that there are options to see filter out what's coming in but not what is being sent! But if there's a way to do this, it would be appreciated.
    Regards,
    Maz

    Mail creates a Sent mail folder automatically when you set up an account. All your sent mails are kept there. You configure how it saves your sent mail here:
    You should see the mailbox in Mail's sidebar:

  • How would one Create a "Custom Cursor" that can move BEHIND certain layers?

    In terms of Flash expertise I am on the the doddering divkid level -- but have mananged to create a custom cursor; a hand that I want to move about over most layers but under one specific layer. Currently, no matter the layer order, when published the cursor image jumps straight to the top.
    Is there a property I can imbue in the would-be "top" layer or a way of editing or modifying the custom mouse cursor actionscript that would bring about the desired result?
    Many thanks in advance for your time and expertise...........................peace

    you can easily attach the cursor between the specific layers you want using an empty movieclip and add your cursor movieclip to the emptyMC using the class name. Look at the screenshot and follow the code. it works
    and here is the code:
    import flash.display.MovieClip;
    var whytehand:MovieClip=new cur();
    emptyMC.addChild(whytehand);
    emptyMC.mouseEnabled = false;
    emptyMC.addEventListener(Event.ENTER_FRAME, fl_CustomMouseCursor_5);
    function fl_CustomMouseCursor_5(event:Event)
        emptyMC.x = stage.mouseX;
        emptyMC.y = stage.mouseY;
    Mouse.hide();
    Thatz it!

  • How can I create a custom step that does nothing but make calls to a dll

    What I'd like to end up with is a Custom step that
    1. Takes several string parameters
    2. Makes several calls to functions in a DLL
    3. Returns and stores error codes returned from the function
    I've been through the KB article "How Do I Make a Custom Step Type".
    This got me about halfway there; while helpful, it didn't provide a
    reference for some of the questions I had, specifically:
    1. What sort of sequence action type should I start with (to use as a template)?
    2. If I start with a "Call Executable", do I need to specify the module when I incorporate the step into the sequence?
    3. How does one pass parameters in and out of a custom step type?
    4. How does the step type report progress/errors to the report?
    Thanks in advance.
    Mike

    Hi,
    To interface to a DLL you will need to use either the DLL Adapter or the CVI Adapter, not the Call Executable adapter.
    Have you been through the Using LabWindowsCVI with TestStand manual. This should answer all your questions, all the chapters are relevant.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

Maybe you are looking for