I created a large Flash Pro file which includes buttons and I want to share it with others

I created a large Flash Pro file which includes buttons and I want to share it with others. It's too big for e-mail and youtube and dropbox don't support fla files. I'm new to Flash and I would appreciate a simple solution!
Thank you!

Thank you! But based on the link you gave me it seems like I should only have to do step 1 since I am not trying to embed my file into a web page. After I uploaded the SWF file to the Google Drive it still will not play. It keeps opening in Adobe Device Central and won't play anything. Should I go ahead and do step 2?
I really just want the video available to share with others. It seems like this shouldn't be very difficult.
Thanks!

Similar Messages

  • I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do?  How can I get the data off this disc?  I can see it has been already burned, so files are on there?

    I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do?  How can I get the data off this disc?  I can see it has been already burned, so files are on there?

    Try cleaning the lens and see if that will restore functionality to the DVD drive.  Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth)  around a business card and insert it gently inside the slot.
    If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
    Ciao.

  • Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file bu

    Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file but not working. What is the matter and how can I deal with it?

    I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.

  • How to read a file which has header and without header

    Hi,
    I have a file to file scenario wherein there are txt files in the source system, some of which has header and some without header.
    How does the sender adapter dynamically identify a file with header and without header.
    I knew that File content Conversion in the sender adapter with "Recordsets per message = 1" can read the header.  But how to handle dynamically.
    Thanks in advance for suggestions and advice.
    Regards.
    Praveen

    Hi,
    Let me give a more clear picture:-
    One of my file which has header and the corresponding values is listed hereunder:
    PERNR;KID;PNALT;NACHN;NAME2;VORNA;TITEL;TITL2 and so on.....
    ;1200;1200;Angus;; and so on.........
    Other file which has no header but only values in it:-
    1200;1200;;Werner;Angus and so on.......
    The structure remains same for all the files.  The only difference is that some of the file has header in it and some without header.  The Message Type is mentioned hereunder:-
    DT_LegacyEmployee (Category - Complex Type)
         Employees (Category - Element, Occurence - 1)
              Employee (Categroy - Element, Type - DT_LegacyEmployee_Row, Occurence - 0...unbounded)
                   PERNR
                   KID
                   PNALT
                   NACHN
                   NAME2 and so on......     
    I read the file in record row.  The file conversion parameters in the file sender adapter are mentioned hereunder:-
    Document Name - MT_LegacyEmployee
    Document Namespace - http://abc.com/xi
    Recordset Name - Employees
    Rescordset Structure - Employee,*
    Recordsets per Message - 1
    Key Field Type - String (Case Sensitive)
    Employee.fieldSeparator - ;
    Employee.endSeparator - 'nl'
    Employee.fieldNames - PERNR,KID,PNALT,NACHN,NAME2,VORNA,TITEL,TITL2 and so on........
    How do we dynamically identify whether the file has header or not.  Even if the file has header or without header, the file needs to be picked and transferred to the target system.  Kindly clarify.
    Regards.
    Praveen

  • Register XSD-Files which includes Other XSD-Files

    Hallo
    i have two XML-Schemata. One is included by the other.
    Here is an example:
    This is the XSD, which is included by the other (metadata.xsd):
    <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
         <!-- Metadatenbereich für das xml-Dokument selbst-->
         <xs:element name="metadata" type="metadataType">
              <xs:annotation>
                   <xs:documentation>ROOT ELEMENT von Metadata</xs:documentation>
              </xs:annotation>
         </xs:element>
         <!-- Glossar: Metadatenbereich + Glossarinhalt als Liste von Glossareinträgen -->
         <xs:complexType name="metadataType">
              <xs:sequence>
                   <xs:element ref="identifier"/>
                   <xs:element ref="category"/>
                   <xs:element ref="creator"/>
                   <xs:element ref="creation_date"/>
                   <xs:element ref="publisher"/>
                   <xs:element ref="language"/>
                   <xs:element ref="title"/>
                   <xs:element ref="basic_year"/>
                   <xs:element ref="statistic"/>
    This is the XSD, which include the other XSD (lexikon.xsd):
    <?xml version="1.0" encoding="UTF-8"?>
    <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" elementFormDefault="unqualified" attributeFormDefault="unqualified">
         <!-- Includieren der Metadaten-->
         <xs:include schemaLocation="metadata.xsd"/>
         <!-- ROOT Element von Lexikon-->
         <xs:element name="lexikon" type="lexikonType" xdb:defaultTable="LEXIKON">
              <xs:annotation>
                   <xs:documentation>ROOT ELEMENT</xs:documentation>
              </xs:annotation>
         </xs:element>
         <xs:complexType name="lexikonType">
              <xs:sequence>
                   <xs:element ref="metadata"/>
                   <xs:element ref="lexikonEntries"/>
              </xs:sequence>
              <xs:attribute name="lexikonKat" type="xs:integer">
                   <xs:annotation>
                        <xs:documentation>für spezielle UnterkategorienTypen zu den Lexikas</xs:documentation>
                   </xs:annotation>
              </xs:attribute>
         </xs:complexType>
         <!---->
         <!-- GLOSSAR-ELEMENTE -->
         <!---->
         <!-- ExplicationTxt-->
         <xs:element name="explicationTxt" type="explicationType"/>
         <xs:complexType name="explicationType">
              <xs:choice>
                   <xs:element ref="verweis"/>
                   <xs:element ref="txt"/>
                   <xs:element ref="para"/>
    Both documents have i copied to a webdav-folder. Now i want register the documents.
    BEGIN
    DBMS_XMLSchema.registerSchema(
    schemaurl=>'http://190.1.1.148:8080/home/DEV/xsd/lexikon.xsd',
    schemadoc=>sys.UriFactory.getUri('/home/DEV/xsd/lexikon.xsd'));
    END;
    The following error-message is displayed:
    ERROR at line 1:
    ORA-31000: Resource 'metadata.xsd' is not an XDB schema document
    ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 0
    ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 166
    ORA-06512: at line 2
    I made the XSD-Files by XMLSpy. The Documents are well-formated and valid.
    When i make a new XML-File based ONLY (of course) on lexikon.xsd everything works fine with XMLSpy.
    How must i register these documents? Is it possible? Or can´t i register XSD-Files which includes others?
    Thank you very much
    cu
    Heidi

    Heidi,
    register the metadata.xsd first inthe same way and then register the lixikon.xsd.
    it should work.

  • I have few PDf files on my computer and I want to add them to my ipod touch, please tell me the procedure on how should I do that? Secondly I want to run these Pdf files through the ibook app, as it also have the Pdf file sections

    I have few PDf files on my computer and I want to add them to my ipod touch, please tell me the procedure on how should I do that? Secondly I want to run these Pdf files through the ibook app, as it also have the Pdf file sections

    You should be able to just place them in your Books library in iTunes and check to ensure that your Book library is configured to sync to your iPod when you sync your iPod to iTunes.

  • The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

    The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed.  Thanks!

    If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
    If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership. 
    Please refer to : Lightroom and Creative Cloud FAQ
    Regards
    Rajshree

  • I have a macbook pro 15 inch mid 2012 and I want to change the hard drive, what specifications do I need to search for?

    I have a macbook pro 15 inch mid 2012 and I want to change the hard drive, what specifications do I need to search for?

    Does a Seagate - 1TB Internal Serial ATA III/Serial ATA II Solid State Hybrid Drive for Laptops - Multi with the following specifications may work??
    Height
    4 inches
    Width
    2.75 inches
    Weight
    3.5 ounces
    Color Category
    Multi
    Minimum System Requirements
    PC: Windows XP, Vista, 7 or 8; MacBook®, MacBook Pro or Mac Mini: Intel®
    processor; OS X; Linux; internal Serial ATA III or Serial ATA II support

  • Hi! I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is

    Hi!
    I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences > sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is listed in "shared folders" but under "users" everything is grayed out (it says "read and write" for "everyone" - but "read and write" is grayed out, and it doesn't let me add or subtract users). Now I can access all of the folders I shared from my imac except for the externalhard drive. What's going on?

    Hi RRFS!,thanks for help.I forgot to tell that hard drive has 2 partitions 1:format :Mac OS Extended (Journaled) and that works properly,2:format:MS-DOS (FAT32) and when i "get info" for both :first has shering & permitions:You can read and write - with name and privilege, second has shaing & prermissions:You can read and write- without name and privilege

  • I have a Indesign CC file and I want to open it with Indesign CS6

    I have a Indesign CC file and I want to open it with Indesign CS6

    See the FAQ
    Re: how to save down from INDD CS5 to CS4
    You can view all the FAQ at the beginning of the Forum InDesign

  • I recently changed my plan to the photoshop plan which includes photoshop and Lightroom but LR won't let me go into the Develop Module or the other Modules because it says Develop Module is disabled. Please renew your membership to reactivate. I'm still a

    I recently changed my plan to the photoshop plan which includes photoshop and Lightroom but LR won't let me go into the Develop Module or the other Modules because it says Develop Module is disabled. Please renew your membership to reactivate. I'm still a member so why won't it let me go into Develop Module? or any of the other modules?

    The Photoshop LR CC is active but you have not yet activated it. The activation server shows it. Please log out & log back in of the CC desktop CC.
    The Complete CC purchased last year is active till 11th of July. In case after logging out & logging back in does not resolve the issue, please contact Customer support Contact Customer Care
    Regards
    Rajshree

  • I own a MacBook Pro 15-inch early 2011 and I want to upgrade the ram to 16 or 8gb is it ok to use a corsair brand memory?

    I own a MacBook Pro 15-inch early 2011 and I want to upgrade the ram to 16 or 8gb is it ok to use a corsair brand memory?

    Welcome to Apple Support Communities
    Of course. Corsair RAM is compatible with your Mac and the Early 2011 MacBook Pro supports 16 GB of memory. Make sure you buy the correct memory for your MacBook Pro. See > http://www.corsair.com/us/memory-by-product-family/mac-memory-upgrades.html

  • How do you print a list of bookmarks which includes addresses and properties?

    How do you print a list of bookmarks which includes addresses and properties?

    Which properties do you want included?
    See also:
    *[[/questions/748417]]

  • Create sprite in Flash Pro?

    You can create a movie clip within the Flash Pro interface and then use it with actions script. But how do you create a sprite element in the Flash Pro interface (by that I mean creating it without using action script)?
    Best regards,
    Åsa

    While creating the movieclip, export for actionscript with the base class as Sprite as like above.

  • Can I work on a Premiere Pro file, which has dynamic links, while it is exporting?

    Will further edits interfere with or change the export? What if I make changes to a dynamically linked file in After Effects? I just want to make sure it is okay to make changes during an export.

    What version of Premiere are you using?
    For CS6:
    When you send a Premiere Sequence to Media Encoder via the "Queue"
    option, Premiere saves a copy of the Premiere Project here (Win):
    C:\Users\<username>\AppData\Local\Temp
    Media Encoder uses this copy as the reference while encoding,
    so you are able to continue to work in Premiere without problems.
    However, Media Encoder (and its 'Temp' Premiere Project) will
    continue to look to the original Dynamically Linked Ae files for encoding.
    If you want to continue working on an Ae comp while an encode
    in in progress in Media Encoder, you should save an incremental copy
    of your Ae file (Ctrl+Alt+Shift+S) before you make any changes.
    If you do this, it will not interfere with the ongoing encoding.

Maybe you are looking for

  • How to reference the Parent view Object attribute in Child View object

    Hi , I have the requirememt to generate Tree like struture to display Salary from joining date to retirement date in yearly form.I have writtent two Pl/SQL function to return parent node and child nodes(based on selected year). 1.First function --> I

  • Can i use firefox on an XPceleron 2.70 cpu with 1 GB ram

    I want to use Firefox on this computer but it is not a recommened Pentium 4. Will it work on a lesser cpu?

  • Blocking of complete Vendor MAC Address

    Hi All, is it possible to Block or Disable a complete Vendor MAC - like  Apple 7c:6d:62:x:x:x - with using Wildcards on a Wireless LAN Controller? Background is, that the Customers IT-Department is only allowing the use of one Vendor, so every MAC Ad

  • Borderlayout problem, make North a bit larger

    Hi, I want to create an applet with a border layout, I have the following code to define the layout: setLayout (new BorderLayout (0,5)); add ("North", infoline); add ("Center", screen); add ("East",vert_scrollbar); add ("South", txtinput); At the Nor

  • Fonts display strangely

    Can anyone explain why my fonts don't always display properly in Safari? I can see most of the text but everynow and again, I get a window with what can only be described as greek text and punctuation marks.