I created a new itunes, but when i add the music i added it from my external hard drive by accident, so when i disconnect it and wish to play music without having it connected, obviously it asks me to located my songs, i dont want to locate each song help

i created a new itunes, but when i add the music i added it from my external hard drive by accident, so when i disconnect it and wish to play music without having it connected, obviously it asks me to located my songs, i dont want to locate each song and i dont want to have to add all my music again, is there anyway of changing the location to a new folder all at once? for example, if it is my computer/harddrive/music/.... can i change it to mydocuments/musis/...
and having the exact same music folder so all the further directions are accurate?
thanks
please i need help

pass the music on your external hard drive to the computer then drag the to Itunes

Similar Messages

  • Itunes doesn't sync music that was transferred from an external hard drive

    I transferred a song from an external hard drive onto itunes on my laptop. The song plays through itunes on my laptop after I've disconnected the external hard drive, but it won't sync the song to my iPhone. I have a lot of music on that ext. HD and I'd like to listen to it on my iPhone.

    Hi, Alex 58. 
    Thank you for visiting Apple Support Communities. 
    Try opening iTunes with the external drive connected and sync the music over to the iPhone.  If all media is located on the external drive, iTunes will not sync the requested media to the device without the drive connected.  You may need to remove the sync music preference and reapply it for the media to transfer. 
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/ph12313
    Cheers,
    Jason H. 

  • I imported files from an external hard drive to Itunes on a new computer.  they imported & play fine, but the ratings & playlists are gone & i am unable to update any info.  I found a file name playlist on old drive & imported now most files are missing!

    I imported files from an external hard drive to Itunes on a new computer.  they imported & play fine, but the ratings & playlists are gone & i am unable to update any info.  I found a file name playlist on old drive & imported now most files are missing!  Help!

    Can you locate the iTunes Library.itl file on the old drive? Ideally you would have simply copied over the entire iTunes folder structure from <User's Music> on the old computer into <User's Music> on the new one to transfer the library will all playlists, ratings, play counts etc. intact.
    tt2

  • How do I fully import my itunes music from my external hard drive to my new HP computer so that I don't need the external HD attached to listen to my music? It won't promt me to fully import songs when I import the folder from the EHD.

    When I select File> Add folder to library and then press "select folder" after finding the iTunes music folder I wish to import from my external hard drive, it does not promt me whether to fully import it or not. After the importing is complete, the external hard drive must be attached in order for me to listen to my music. I do not wnat this; I wnat my music fully imported so that I don't need my EHD. What can I do? Thanks!

    To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions

  • I recently restored my laptop and also iTunes from an external hard drive, but when I play songs, it says the original file could not be found. How do I locate and fix this?

    I recently restored my laptop with Windows 7 and imported my iTunes library from my external hard drive. When I try to play songs, it says it cannot and that the original file could not be located. How do I fix this?

    Put the files back where iTunes expects them to be.

  • I recently reset my computer and copy my music from an external hard drive to my itunes library.  When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found".  need help

    I recently reset my computer and copy my music from an external hard drive to my itunes library.  When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found".  But when I have my external hard drive plug in the song will play with no problem.  What do I need to do to play my music without having the external harddrive plug in ????????  Please help

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • I have a new Windows tablet computer with limited hard drive space, and cannot transfer my itunes library to the hard drive. Can I run t media from an external hard drive? If so, how do I transfer my files?

    I have a new Windows tablet computer with limited hard drive space (32 GB), and cannot transfer my itunes library to the hard drive. Can I run itunes from an external hard drive? I have tried to follow some of the directions on this site, but am having no success. Thanks.

    iTunes will run fine with the media on an external drive.
    However, I suggest that a tablet computer with a tiny hard drive is not ideal as the primary computer for managing an iTunes library, even a small one. If you have another machine, perhaps a big, boxy, inexpensive old desktop with a decent amount of storage, that might be a better choice.
    http://support.apple.com/kb/HT1364

  • I get error 8062 when trying to copy files from one external hard drive to another. It starts out copying files, but after 10 minutes or so it stops and I get the error 8062. The hard drive tech support says the problem is in my Macbook Air.

    I cannot copy my doc and photos and videos from one external hard drive to a second external hard drive -- both plugged in to my MacBook Air -- I get Error 8062 and the copying (which seemed to be going on for 10 minutes) stops and nothing gets copied.
    As any Macbook Air owner knows, there is SO LITTLE storage capacity on the computer that you have to back up big files onto an external hard drive to avoid getting the other annoying error that says you have no more memory/storage capacity/whatever the proper term is, and you cannot use the computer.
    Backstory: Before this error cropped up, I had backed up lots of files to an external drive and then removed them from my computer. But then the external hard drive got corrupted and I could not access my entire photo library. Had to pay $850 to Kroll Ontrack to recover those files. I have now bought 2 new external 1 Terrabyte  hard drives as protection against another such disaster. BUT I cannot copy the files from the first hard drive where all my reovered files now sit, to another backup hard drive.
    Feeling vulnerable. Please help.
    SusaninNY

    From the menu bar, select
     ▹ System Preferences ▹ Energy Saver ▹ Power Adapter
    and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
    If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    Test the drive with another Mac. Test another drive with this Mac.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    Start up in Safe Mode and test.
    If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock.

  • I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect to my MacBook it erases everything on had on there. Can someone please help with this problem?

    I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.

    dwgar1322 wrote:
    I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
    Yes, you have WD software installed  REMOVE IT !! 
    WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
    (also dont use WD drives anymore)
    Read all about it here:
    https://discussions.apple.com/thread/5475136?start=255&tstart=0
    See their website on removing the destructive WD software here:
    http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
    Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
    http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/

  • I have just restored data from an external hard drive, but half of my iTunes songs are getting the error "original file cannot be located."  Where are these files?

    My Windows 7 PC just had to be reformatted, and I have retrieved all of my files from an external hard drive.  About half of my iTunes library is working fine, the other half pop up the error statement "original file cannot be located."  If they haven't come off my external drive, where are they?

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • When I try to import .olm files from my external hard drive back up, where do they go? It says on different forums they go to the "on my computer" folder but they are not there

    When I try to import .olm files from my external hard drive back up, where do they go? It says on different forums they go to the "on my computer" folder but they are not there.
    I go through all the instructions but then my emails do not appear. I'm starting to panic a bit!

    You might want to try asking on the MS Office Outlook forum - http://answers.microsoft.com/en-us/mac/forum/macoutlook - since those are Outlook files.
    Also note which method you're using to create a backup.
    Clinton

  • How do I stop ITunes from loading songs into library when played from an external hard drive

    How do I stop ITunes from loading every song I play into my library from an external hard drive?

    Mac OS X: Double-Clicking a File Opens the Wrong Application - http://support.apple.com/kb/TS2291
    -= Changing the application used to open all files of a certain kind (written with reference to OSX 10.4 but may not have changed) =-
    1) In a Finder window highlight a file of the kind you want to change the application to open that kind of file.
    2) While that file is highlighted, select File > Get Info or press command (apple or propeller icon) + i to get a file information window.
    3) In the lower part of the info window there is an "open with" menu with a list of applications.
    4) If your application is already in the box then it is the default application for opening that kind of file and you don't need to do anything more.  Close the get info window.
    5) If the application showing in the menu is not the one with which you wish to open the file then select a new application. If your application does not appear there then select the "other..." and track down the application (usually in the Applications folder at the main level of the computer).
    6) If you wish to change all files of this type to open with this application in future, make sure the "change all" button is selected.
    7) Close the get info window.

  • HT2518 How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

    How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

    Hi, did you try iTunes>File>Import?

  • HT1386 I have a new computer. I have copied Itunes library from an external hard drive. Itunes now tells me I cannot sync with my Ipod as it thinks the 20gb on the computer are different to the 20gb on my Ipod touch! What have I done wrong? How can I fix

    I have a new computer. I have copied Itunes library from an external hard drive. Itunes now tells me I cannot sync with my Ipod as it thinks the 20gb on the computer are different to the 20gb on my Ipod touch! What have I done wrong? How can I fix it?  Alan

    See:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek

  • How to migrate iTunes Library from an external hard drive to a new Mac Book Pro?

    How to migrate iTunes and iPhoto librarys from an external hard drive to a MacBook Pro?

    With iTunes:
    iTunes: How to move your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    do not confuse moving your whole folder and library with moving just media files as in
    iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
    Quick answer if you let iTunes manage your music:  Copy the whole iTunes folder and all its subfolders and files intact to Home > Music on your computer. It will replace the one that may already be there and anything you have in it will be lost -- you could give the folder a different name just in case, and delete it yourself later.  Unplug the external and start iTunes.

Maybe you are looking for

  • ERROR WHILE OPENING INTERFACE

    Hi, When i open interface iam getting ODI error "Cannot get the technology language" Details:_ java.lang.NullPointerException      at com.sunopsis.dwg.dbobj.SnpLeTechno.initializeNonPersistantFields(SnpLeTechno.java)      at com.sunopsis.dwg.dbobj.ge

  • Displays no longer recognised, it is my video card?

    I have two Dell 22" widescreen monitors, and two computers plugged into both them via the DVI and VGA inputs. One is a 2x3.2 GHz Quad-Core Intel Xeon Mac Pro and the other is an older G5 PowerPC, both are running Leopard, the G5 is on 10.5.4, the Mac

  • Trouble connecting to ethernet network

    For the past 6 months i have been connecting my network via ethernet usin a cat 5e connection.Recently i was at a friends place plugged my laptop into his cat6 cord connection and it worked fine.However when i came back 2 my place and tried to connec

  • PA-RISC to Itanium. Oracle 10.2.0.4

    Hi gurus !!! We are planning to move form HP-UX PA RISC 11.11 + Oracle 10.2.0.4 to Itanium 11.31v. We've read carefully, many documentation and notes, but we are not sure about Oracle. How we install oracle on Itanium ?.  Which manual we need to foll

  • Weblogic 11g load balancing configeration

    how can configure load balancing in weblogic 11 server