I created a wireless network with my Time Capsule but would like to connect this network to a WiFi Hotspot for Internet Access

I have created a Wirelss Network at home with the Time Capsule and would like to connect this network to the Internet.
I can't use LAN Cable to connect to it anything becasuse I usually use the WiFi that runs through my building.
Can I connect the Time Capsule to the WiFi hotspot somehow so that all computers on my network have Internet access and if so, what do I need?
I need this done because the computers can only be connected to either the WiFi network or to my Time Capsule Network at any given time.
Or is there a way to be connected to both networks simultaneously?
I have two PC's and two Macs.
Thank you for any support and I apologise for my ignorance. I am not too good with networking.
I have tried the silliest of things like connecting a router to the TC only to then realise that the TC had an inbuilt router.
I tried connecting a USB WiFI adapter to the USB Port on the TC but it doesnt detect it that way apparently.
Please help!

I have a kinda same problem @ https://discussions.apple.com/thread/3531642
Please reply (somebody)!
JeremyZ

Similar Messages

Replacing an Airport Express with a Time Capsule but it won't connect to the internet.

Hello, I hope somebody can help.
I am trying to replace an Airport Express with a 2TB Time Capsule but it won't connect to the internet, via an ADSL modem.
I have tried everything I can think of, powering down all devices, re-setting all devices, but nothing seems to solve the problem.
When I first tried to set up the Time Capsule, there was an option to replace the Airport Express using the same settings.
But there were repeated error messages of 'No DNS Servers' and 'PPPoE server couldn't be found'.
I also had messages that the password for PPPoE wasn't correct, but when I plug the Airport Express back in again, everything works fine.
What could the problem be?

99% of issues with authentication are wrong password or wrong username.. eg it can be strange like the user name is missing the domain.. whereas the Airport Express works fine without it.
Ring your ISP and make doubly sure you have exactly the correct username and password.
If it still doesn't work, put the adsl modem back into router mode and try it again directly on the modem.. if it works ok on the modem but fails on the TC that is possible and can be caused by pppoe client using incorrect authentication type, CHAP or PAP which the TC does not allow you to select AFAIK.. some ISP do not give enough time to get the router to switch on auto to the correct authentication method.
In the end run the modem as router and bridge the TC. It will work just as well for most installations in bridge as the modem in bridge.

My macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?

This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get.

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and back

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and backing up data wirelessly via time machine.
I have a Mac Pro, iPhone 6, iPad, Apple TV and Time Capsule. No home Internet.
Is is possible to have my iPhone 6's wifi hotspot used to provide Internet to my wifi network on time capsule? Has anyone else had success doing this? I'm not a tech head and really know very little about things like this. Thanks. Jen

You can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !!

I have an older Macbook, and it has "n" wi-fi bt I need software to unlock it. It is supposed to come with the time-capsule but there is no software that I can find. Does anyone know were it is? supposed

I have an older white Macbook. It is supposed tohave "N" networking but needs to be unlocked. The software is supposed to come with the time-capsule, but I can not find it, also I checked with a friend who just bought an airport extreme and he can't find any software. Does anyone know where this software is located?

I think you are looking for this: AirPort Extreme 802.11n* Enabler for Mac - Apple Store (U.S.)

I just set up my Time Capsule and would like to back up my old MacBook with Tiger (10.4.11) to it

I just set up my Time Capsule and would like to back up my old MacBook with Tiger (10.4.11) to it so I can access the files with out taking up space on my new MacBook Pro. Since I've purchased this time capsule I've heard that using it as a "server" it not ideal, but at this point I don't have a lot of other options. Any advice on the best way to back up my old computer and be able to access these files from my new computer??

Open Macintosh HD and look for the Time Capsule icon under the SHARED heading on the left side of the Finder window
Click on the Time Capsule icon and a folder representing the drive will appear to the right. The folder will be named "Data" unless you have changed the name of the drive.
You may need to click Connect As in the upper right hand corner of the window and enter the Time Capsule device password to get the folder to display the first time that you do this.
Once the folder is displayed, double click the folder to mount the drive on the desktop. You can drag/drop files onto the icon. This is going to be very tedious, but it can be done.
I would suggest that you look at an application like Carbon Copy Cloner to automatically backup the files that you select. Then you can schedule the applcation to automatically backup any files that have changed each day.
More info here: Carbon Copy Cloner - Home

I try to backup my Lacie Rugged Thunderbolt with my Time Capsule but the Lacie is not active (grey) in the Time Machine preferences. Why ?

I try to backup my Lacie Rugged Thunderbolt with my Time Capsule but the Lacie is not active (grey) in the Time Machine preferences. Why ?

@LaPastenague
Morning / Afternoon.
We may have an unfair advantage in that the Internet gets here faster than it does "down there".

How do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it when you just play a slideshow.

how do you shuffle the image order when creating a new slideshow in apterture 3? i would like to do this automatically when creating a new slideshow. i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow. i know you can sort it by different fields, but i want it to be random. thanks.

If you want to rearrange images in random order you can try an AppleScript:
retrieve a list of selected images from Aperture
shuffe the list properly
create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
Here is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
on removeItem(ims, i)
-- remove the item at position "i" from a list ims
          if ims is {} then return {}
          if (length of ims is 1) then return {}
          if i < 2 then return rest of ims
          if (i = length of ims) then return (items 1 thru (i - 1) of ims)
          if i > (length of ims) then return ims -- should be error?
          return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
end removeItem
on shuffle_items(ims)
-- shuffle the items of the list "ims" randomly
          local numitems, ims_shuffled, nextrest, nextpick, i
          set numitems to length of ims
          if length of ims < 2 then return ims
          set ims_shuffled to {}
          set nextrest to ims
          repeat until nextrest is {}
                    set i to (random number (numitems - 1)) + 1
                    set nextpick to item i of nextrest
                    set beginning of ims_shuffled to nextpick
                    set numitems to numitems - 1
                    set nextrest to removeItem(nextrest, i)
          end repeat
          return ims_shuffled
end shuffle_items
on shuffleIms()
-- retrieve the selected images from Aperture
-- and display them in random order in full screen mode
          local imageSel, shuffled, i
          tell application "Aperture"
activate
                    set imageSel to (get selection)
                    set shuffled to my shuffle_items(imageSel)
                    set fullscreen to true
                    if imageSel is {} then error "Please select some images."
                    repeat with i from 1 to count of shuffled
                              reveal {item i of shuffled}
delay 3 -- chnage that to the time you want
                    end repeat
                    set fullscreen to false
                    return shuffled
          end tell
end shuffleIms
shuffleIms()
Some more code snippets to go from here:
To create an album:
                    tell library 1
                              if not (exists album "shuffledAlbum") then
make new album with properties {name:"shuffledAlbum", image version:shuffled}
                              end if
                    end tell
And to add the images from the shuffled list to the album:
                    repeat with i from 1 to count of shuffled
                              duplicate item i of shuffled to album "shuffledAlbum"
                    end repeat
Regards
Léonie

I bought a 3tb Time Capsule and would like to stream movie from it to my Samsung Smart TV. Do I need Apple TV or Another App?

I bought a 3tb Time Capsule and would like to stream movies from it to my Samsung Smart TV. Do I need Apple TV or Another App?

TC is not a media device.. it has no media smarts at all.
And Apple TV is not a media player .. it is strictly a streamer.
Apple have built their entire media system around itunes.. so without itunes running on a computer nothing will happen.
The TC is unsuitable as location for your iTunes library as well.. you are simply slowing down the access to the library and making streaming more prone to glitches.
TC is for TM backups.
Use your Mac with iTunes library on an external hard disk if it is too big to fit in the internal disk.
The samsung TV cannot use the TC either because it needs a DLNA server extension on the storage.
There is however one way.. and not recommending it.. just saying it can be done.
Depending on how your media files are formatted.. you can use a WD live TV.
Because WD TV is a full media player and can play raw media files (almost any format) directly from a media source without DLNA, you can play your movie files.. but IMHO it is much easier to simply get a WD MyCloud or any cheap NAS.. that has built in DLNA media server.. almost all do.. and then your TV can play the media directly without any other player.

Using WRT300N router but would like to connect to a Wired network about 200 ft away

I have a wirelessnetwork using WRT300N router but would like to connect to a Wired network about 200 ft away Can you tell me what I should buy to make it work ? Thank you

But the Wired network is in another building about 200ft or more away fromthe wireles network..and I cant run the ehternet cable to it...Pls advise. THank you

?My music and pod casts will not play. I have followed the instructions many times. I would like to toss this equipment.

?My music and pod casts will not play. I have followed the instructions many times. I would like to toss this equipment. help please.

What happens when you try?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all media and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Time Capsule - Can it run as DHCP router, create a wireless network and plug into switch for wired network all at the same time?

I have a closet with Wired connections from all over the house terminating in it. I also have the internet modem and a switch in this closet. My old setup was a netgear in the closet creating a wireless network and also feeding the Ethernet ports all over the house. In my room, I had an Airport express (a month old) bridging the wifi to make the wifi network larger. The Express was hard wired from the wall and my mac mini was using it's wifi (printer was plugged into other ethernet port). Everything was working great.
Fast forward to last week. My Netgear died. So, I bought a time capsule. My plan was to move the Express to the closet and have it create the wifi network and also then run cat 5 cord from express to the switch to feed all the wired wall plugs. Reset it and set it up to create the wifi network as well as DCHP NAT. Wireless was running great on it. Then I plugged in the Cat 5 in the second Ethernet Port to the switch. Wifi stopped working and none of the computers would connect using wired connections either. They would see a 'network' but nothing would work. I would unplug the Cat 5 feeding the swtich and the wireless would start working again. Plug the Cat 5 back in and wireless would stop.
So I thought I would try the Time Capsule in the closet and see if I could get it to work. Pretty much the same thing, except at this point I figured out if I went in and told it NOT to create a wifi network the wired portion worked fine and all the wired computers in the house worked fine. Of course, then I didn't have Wifi.
I'm not clueless when it comes to networking, but I can NOT figure this out! Can either the Time Capsule or Express Create the wifi network AND also feed the data to the switch for all the wired computers?
To simplify this is what I want my end result to be. I prefer the Time Capsule to be the wireless connection extender, but if I have to have the Express do it, I'm fine with that.
1. Express in the closet creating the wifi network as well as feeding the data to the wired connections via my switch.
2. have the Time capsule in my room at the opposite end of the house plugged into the hard wired connection to extend the wrieless network as well as have wired connections such as my printer and my Mac Mini.
If I can get #1 to work, I don't think I'll have any problems with #2. Help!

I have an equally complex setup with a managed switch actually but I have never seen the TC have this kind of issue.
What I do notice is you have changed the TC from defaults.. you are using a non-default IP range.
I have run across issues like this where people move things from default.
I would like you to start over.. factory reset the TC. That will set it back to default router mode.
Do the min setup on the TC..
1. Change all names from what you were using. That includes the TC name and wireless name/s
Make them short, no spaces and pure alphanumeric because that is the correct way to network. Apple default names with spaces and apostrophes are fundamentally bad.
2. With just the TC plugged into the switch.. and a single computer connected by ethernet. Power cycle the whole network.. this allows the switch to clear all the old MAC address.
3. Test on the computer just ethernet. Turn the wireless off.
The computer must use dhcp and must get an ip from the TC.
It has to get the correct Router.. ie Gateway.. I wish apple could stick with proper network terminology.
And it must get same address or valid DNS server address/es.
If it fails.. please plug ethernet directly to the TC.. bypassing the switch.
You should get the standard IP addressing and internet connection.
If not please post the screenshot from the Mac of the network preferences showing the ethernet setup.
I need to see what address it does get. I need you to make sure the ethernet is the TOP of the list. So rearrange the order of network connection. With the airport off it should just go to the top of the list.
If it appears to be working .. but a browser cannot connect, open a terminal and ping an internet address.
Ping the actual gateway address the ISP gives you and ping the ISP dns address.

Wifi Working With New Time Capsule But Can't See It To Configure Settings?

I had an airport extreme but recenlty purchased an airport time capsule. When I initially plugged it in, by airport utlity saw it and it asked me to set up a password. But then I noticed there was no internet signal getting to the time capsule. We wound up replacing the DSL Router and now the internet is up and running. But now when I open the airport icon, the time capsule doesn't even show up. When I open the airport utility through finder it shows the time capsule but blocks me from accessing anything. So I can't go into any set up configuration for changing passwords, setting up guest network or setting up the back up to the time capsule. I don't see any downloads for a new utility for the time capsule, so I'm assuming it's the same as for the airport extreme? What do I need to do in order to be able access the configuration areas?

Reboot the TC.. it is hard for poor OSX to find it.
No luck.
Just press reset and start again.
Do a new clean setup.. please use all SMB names this time, short, no spaces and pure alphaumeric.
Ensure ipv6 is set to link-local on both the wireless and ethernet if you use it. Wireless is essential even if you use ethernet you cannot do setups without wireless.
Still got trouble??
What is the OS on the computer and therefore version of the airport utility.. you will have huge problems with Mavericks.. as that is its nature.

Wireless printing with Brother - Time capsule

I try to get my printer Brother DCP-J715W up and running, but I can't connect to the router, Time Capsule.
Any suggestions? Is it a problem with WPS or AOSS, don't know exactly what it is, but that's what the error report says ...
Tx, Aldert

Using extend a wireless network on a TC wirelessly is a major no no and I quote from the web
Wi-Fi extenders (sometimes called wireless repeaters) seem like the obvious choice for helping a wireless router cover an entire house with Internet access. Essentially, they pick up a wireless signal just like your tablet or laptop, then rebroadcast that signal, giving you a second access point to connect to. But there’s a big problem with that which kind of cripples the functionality of extenders. Networking expert Tim Higgins wrote this about extenders on SmallNetBuilder in 2011:
“No matter what they are called or technology they use, repeaters start out with a minimum 50% throughput loss. The reason is that a repeater must receive, then retransmit each packet using the same radio on the same channel and with the same SSID. If the repeater is very efficient, then your loss will be close to 50%. But if it’s not, throughput loss can be higher.”
This is why I think you have to restart with cabling to the TCs

Replaced Airport Extreme router with Airport Time Capsule-now printer won't connect to network

I had no issues with connecting to the Airport Extreme. I have recently replaced the Extreme with an Airport Time Capsule (the new one that is 802.11 ac). All of my other products were able to detect the WIFI router and connected with no issue once I entered the password. However, the HP 2710 finds the WiFi router, allows me to select it but when I enter my password and click OK, it comes back after several minutes saying that it can't connect to the network. I checked the IP address and it's all 0.0.0.0 - it's won't establish an IP address either.

Hello @theros1093 , and welcome to the HP Forums, I hope you enjoy your experience!
I understand that you're having issues connecting to your router. I would like to help!
I'd recommend powering down your computer. Once it's powered down, go to the printer and select Setup , select Network, and select. Restore Network Defaults. Power down the printer. Once it's all shut down, unplug the router power for 60 seconds, and plug it back in. After it broadcasts, power on the printer and computer, and reconnect to the wireless network.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I created a wireless network with my Time Capsule but would like to connect this network to a WiFi Hotspot for Internet Access

Similar Messages

Maybe you are looking for