I created an imovie that runs 2hrs 14min but can't get it to burn on a DVD

I creatded an imovie that runs 2hrs 14min but can't get it to burn onto a DVD.
Any recommendations?

Hi
iDVD - don't care about GBs - ONLY - Time = Movie + Menus - as follows
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
If You NEED to put in more than 120 minutes onto a SL DVD - Then I would use Roxio Toast™ as this can squees in between 7 to 10 hours onto this - BUT AT A BARELY USABLY QUALITY.
VHS tapes recorded in EP- mode will look brilliant in comparision
Just as info:
SP = 240 minutes on a standard VHS tape
LP = 480 minutes
EP = 720 or more ?
Yours Bengt W

Similar Messages

My itunes is on an old computer. So old that I can't update it and so Haven't used it in two years. How can I move it to my new laptop and make sure this doesn't happen again? Very frustrated that I've spend $$ but can't get my music.

My itunes is on an old computer. So old that I can't update it and so Haven't used it in two years. How can I move it to my new laptop and make sure this doesn't happen again? Very frustrated that I've spend $$ but can't get my music.
I want so set up itunes on my laptop and make sure that I get all of my old music and any music shared from my sons' itunes accounts. Do I have to set up itunes on my new laptop first and then use the same logins? Really concerned about losing any music, etc.

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

Applet is running in simulator but can't get on the real card.. PLEASE HELP

Hi,
I have been able to run my applet succesfully in a simulator, and it tested okay. My problem is that I can't get the sap or cap fil on my real card (gp211pkis)... I have read that it could be becaurse I need to specify a security domain AID...
Please help...
======================= Upload file into a card
CMD: Install for load
-> 80 E6 02 00 0E 09 A0 00 00 00 62 03 01 0C 05 00 00 00 00 00
<- 90 00
18 blocks to load ...
CMD: Load File
-> 80 E8 00 00 CC C4 82 0D AC BA CA CA FE 20 01 1C 63 6F 6D 2E 67 65 6D 70 6C 75 73 2E 65 78 61 6D 70 6C 65 73 2E 6F 70 70 75 72 73 65 09 A0 00 00 00 62 03 01 0C 05 43 66 69 6C 65 3A 2F 44 3A 2F 47 65 6D 70 6C 75 73 2F 47 65 6D 58 70 72 65 73 73 6F 2E 72 61 64 33 2F 65 78 61 6D 70 6C 65 73 2F 47 58 50 32 31 31 5F 50 4B 5F 49 53 2F 4F 50 50 75 72 73 65 2F 6F 75 74 2F 07 4F 50 50 75 72 73 65 0A A0 00 00 00 62 03 01 0C 05 01 00 00 0D 24 1F 8B 08 00 00 00 00 00 00 00 95 58 09 78 54 D5 15 FE EF 9B 35 C9 10 66 80 51 12 12 4C 01 25 4C 02 44 22 3B 06 B3 01 81 90 C4 CC 24 31 48 4D 86 99 17 18 4D 66 E2 2C 21 A8 45 4A A9 D6 2E 96 C8
<- 69 85
*** ??? : OP.error.E8.6985

hello
your install for load command is not correct.
in data field you must specify security domain AID.
for example , issuer security domain AID : A000000003000000
install for load command :
80 E6 02 00 16 09 A0 00 00 00 62 03 01 0C 05 08 A0 00 00 00 03 00 00 00 00 00 00
you can use smart card Toolset Pro for sending this command.
in toolset Pro. leave Le field blank.
Best Regards,
siavash

I see that firefox is installed but can't get epub books to open. have a cruz android but unable to open any books downloaded.

Cruz Android but unable to open epub books.

Usually when you uninstall/reinstall you are given the option to retain all your settings including add-ons. If you can't get started, though, I really can't help any further.
As a long shot you could try opening Firefox from your Start Menu or Programs folder. If that works, you should create a new Firefox icon. Drag your Firefox from the Start Menu to the Desktop(it doesn't actually move) and it will offer you the option of creating a desktop icon.
As a very long shot you could check the Properties of the Desktop icon and see if anything is out of place.
When you say it doesn't show up on the screen do you mean it doesn't open at all or it opens to a blank screen? Try pressing F11 if you get a blank screen - you could be in full screen mode.

I created an administrator account without a password but can't get in to delete other users

I was trying to delete an administrator level user and created a new administrator user with no password. I cannot access either now and want to get rid of them both. No passwords are working...help..!

OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

I recently purchased a camera that creates RAW files not currently acceptable to my PS CS5I downloaded Adobe Camera RAW 6.7 but can't get it to process my RAW files.

I am on a Mac running OS 10.9.5. I run Photoshop CS5 12.1 x64. When I tried to download AdobeCamerRaw -6.7 I got a message the AdobePatchinstaller couldn't be opened because the identity of the developer cannot be confirmed. I then changed the settings in my system preferences to permit the opening of the AdobePatchinstaller. I then closed bridge and phootshop, restarted them, but no luck. When I view my images in Bridge I see the thumbnails of my jpg images, but instead of thumbnails of the RAW images I just get a a thumbnail that says RAW and a picture of a jewelers loop over a couple of snapshots. I used Grab to capture that logo-like thumbnail, but can't get it into this page.

What brand and model of camera do you have?

Creating a job that runs a Tcl script

Hi,
We currently have a scheduled job running a Tcl script on a 8.1.7 DB. My question is, can I still use the same setup in 10g DB (i.e. creating a job that runs Tcl script)? If I can, how am I gonna do it?
Thanks,
howie

It depends on how you scheduled the job in 8.1.7 DB.
By Cronjob? Yes you can do the same to connect to 10g
By DBMS_JOB?. Yes you can do it in 10g and in addition, can improve it with DBMS_SCHEDULER
Via OEM? Yes in can use Enterprise Manager to create a Job that runs the Script.

I need to create an APP that runs on an Android Tablet to play mp4 video stored on the SDCARD. I ha

I need to create an APP that runs on an Android Tablet to play mp4 video stored on the SDCARD. I have tried using VideoPlayer and passing NULL to the Connect() method, but while this will play a video from a shockwave SWF it will not play it as an APP from a .apk file.

There are several apps in the App Store. Look at them to see what might meet your needs. There is a keynote app that might be best for you.

Create a validation that runs when a button is pressed

Hi good people from this forum, I was wondering if it's possible to create a validation that runs when a button is pressed.
I'm using Oracle Apex 4.2.2 with Oracle Apex Listener 2.0 and Oracle Database XE 11g
Thank you so much for your time
P.S. On another note, How can I change my display picture =P?

You can create a validation and give it's condition like 'When Button Pressed' and select a button name or select the Condition Type as 'Request=Expression1' and give request(button name) in Expression1.
Thanks
Lakshmi

I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension

I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension

Thank you GeeD. I'm still stymied.
I have moved the Event and Project Folders to the "top-layer of the drive" as the instructions state, right alongside the System Folder, Users Folder and Applications Folders.
When I open iMovie 10.0.8, the Events and Projects Folders are empty:
When I select File/Update Projects and Events, I get an alert box that says iMovie couldn't find any:
Not knowing exactly what is meant by the "top layer" in the instructions, I moved the Events and Project folders back inside the "Movies" folder where I found them (but then not where I would call the "top" layer, but rather "iMac/Users/Home/Movies/iMovieProjects". Then I tried to "Update Projects and Events" and received the same alert: "iMovie could not find any projects or events to update."
Then I tried to update iMovie 9.0 (iMovie '11 version 9.0 (1073)) to version 9.0.9 .
[As an aside, the nomenclature of iMovie drives me nuts. The latest version is 10.0.8, which us newer than iMovie '11.]
Back to the update of version 9.0 to 9.0.9.
Presumably because I have version 10.0.8 installed, I got this alert box:
So, I cannot update version 9.0
and I cannot "Update" the Events and Projects created in version 9.0.

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

TS3219 i am setting up an ipod touch for my daughter, created her an account, had it verified, but when I get to the section that reads 'connect to itunes' I plug it into the computer with her log in and nothing happens. HELP. I have been at this for 4

i am setting up an ipod touch for my daughter, created her an account, had it verified, but when I get to the section that reads 'connect to itunes' I plug it into the computer with her log in and nothing happens. HELP. I have been at this for 4 hours

Hello GJS6,
Thank you for the details of the issue you are experiencing when trying to connect your daughter's iPod touch to the computer. I recommend the following article:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thank you for using Apple Support Communities.
Best,
Sheila M.

I can run a slide show using apple tv and itunes but can't get the slides to run in a specific order

I can run a slideshow (of pictures) using Apple TV and ITunes but can't get the pictures to run in the order I set them up with in my hard drive directory

Welcome to the Apple Community.
Websites and third party Apps need enabling before they will allow AirPlay of Video content. Some Website/App developers have not enabled their products, some simply haven't got around to it yet, others have stated that they won't be enabling AirPlay (likely as a result of licensing issues).
I have created a User Tip to list Apps that have been tested with Video Airplay, if you have any Apps that you have tested please leave details in the comments at the bottom of the User Tip or email me if you don't have commenting privileges.

Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

Siri says she can't read my email from the iphone5s lock screen when I'm using the standard headphones, but I could do that on 4s. How can I get my 5s to do that?

Hi Liz,
Sorry to hear you are having a similar problem. Last night I went to the tool bar at the top of iphoto, clicked on "File", then clicked "Browse Backups" in the drop down menu.    I have an external hard drive that is set up to Time Machine.   The Browse Backups opened the iphoto pages in the Time Machine. I selected a date one day ahead of the day I performed the now infamous update, and it showed my iphoto library as it had existed that day.   I then clicked "Restore Library" at the bottom right corner of the Time Machine screen.   Roughly 2 hours later my iphoto was back to normal.   When I opened iphoto there was a message saying I need to upgrade my program to be compatible with the new version of iphoto(version 9.2.1). I clicked "Upgrade" and within seconds it had done whatever upgrading it needed to do.
The only glitch in the restoration was that it restored the library as it appeared last week, so I no longer had photos I had imported this past weekend.   I simply went back to the Browse Backups in the drop down menu, when Time Machine opened I selected the page showing my pictures from this weekend and again said to Restore Library.   Roughly 45 minutes later the library was restored including the most recent photos.
I am now a happy camper.
I don't know if any of this will be of help to you because your email says you are having trouble with photos imported after the upgrade was performed.   Have you had any pop up notices when you first open iphoto, that tell you you need an upgrade to be compatible with the new iphoto?     If so have you clicked "upgrade"?
Good luck Liz, if you have Time Machine running as a back up to your library, maybe you wil be able to get help there, by following my instructions above.   Otherwise,   good luck with your investigations.   I'd be interested in hearing how you make out.
Karen

I have Mac OSX, version 10.4.11; I loaded Firefox 4, lost 3.6.16, and now I found out I can't run Firefox 4. Can I get 3.6.16 back?

I have Mac OSX, version 10.4.11; I loaded Firefox 4, lost 3.6.16, and now I found out I can't run Firefox 4. Can I get 3.6.16 back? I am not sure what to do. I dragged my old firefox icon to the desktop and it disappeared. The new icon has a white circle with a slash, and won't open because I have an older version Mac

You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

I created an imovie that runs 2hrs 14min but can't get it to burn on a DVD

Similar Messages

Maybe you are looking for