I created an iMovie using pictures from my camera roll, I exported the movie to the camera roll and then deleted all of the pictures. Now I can't get the movie to play. Did deleting the pictures cause my IMovie to disappear? How can I get my movie back?

I created an iMovie using pictures from my camera roll, I exported the movie to the camera roll and then deleted all of the pictures. Now I can't get the movie to play. Did deleting the pictures cause my IMovie to disappear? How can I get my movie back?

Download and open this program, lets you look around your I phone as if it was a disc drive, might find em in the iphones drive.
http://www.macroplant.com/iexplorer/

Similar Messages

  • How can I search the stage for a given Movieclip and then add all instances of it to an Array? AS3

    I would like to Add multible instances of one Movieclip, (Library Name = Bats | instance name = none), inside of another Movieclip (instance name = back.visuals) // (By HAND) NOT by addChild(mc_name); // Easy
    If anyone could help me out with code to do the next steps:
    Search the Movieclip, (instance name = back.visuals), that contains the Movieclips, (Library Name = Bats | instance name = none), manually added to the stage by hand.
    Then for all instances of this movieclip (Library Name = Bats | instance name = none) add them to an Array.
    Thank You,
    Dyami

    I think we are having some missed communication. I do not wish to Change Flash's IDE or deveolp new features for flash. I was wondering if there was a way to do my question with AS3. something along the lines of :
    var enemyList:Array = new Array;
    for (var index:int = 0;index < back.visuals.numChildren;index++)
        var wall:MovieClip = back.visuals.getChildAt(index) as MovieClip;
    /* Check to see if wall is of a Specfic MovieClip */
    /* if (Above is True){ enemyList.push(wall) };

  • Using Firefox, when I open Google, e.g., and go to a website, I am not able to close the site without closing Firefox first and then closing all tabs. I would like to keep Firefox open. How do I close the site and then Google?

    All details are contained in the question.

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

  • Is there a way to select MULTIPLE tabs and then copy ALL of the the URLs and titles/or URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; However, I prefer to use a Firefox feature rather than download an add on. Thanks.

    Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?

    Hi LRagsdale517,
    You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
    Please let us know how it goes.
    Best,
    Sara

  • I want to delete my icloud-account from my iphone 5 and then register again, because I want to change my email-address/account name. What would be the steps to follow? How do I make sure I do not lose any information stored on/in my iphone 5?

    I want to delete my icloud-account from my iphone 5 and then register again, because I want to change my email-address/account name. What would be the steps to follow? How do I make sure I do not lose any information stored on/in my iphone 5?

    You would have to delete the existing iCloud account and create a wholly new one - you cannot change the @icloud.com email address of the one you already have.  To make a new one, you will also need an new AppleID as any AppleID can only have one iCloud account associated with it.
    Deleting the account will not delete anything off your device (if prompted for things like contacts, choose to keep them).  You will have to sync everything anew with the new account as you cannot move your sync'd content, your old backups or anything else from one iCloud account to another.  You will have to set up sync again and let it sync to the new account, and then make new backups to the new account as well.

  • How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

    How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums.  Please help.

    You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
    If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

  • HT4623 I screwed up.  I was trying to SYNC and something (error msg) happened.  I tried to continue the SYNC and now my IPhone is dead.  All I can get when I turn it on is a picture, from bottom  to top, I have an WSB connector, an up arrow, and an iTunes

    I screwed up.  I was trying to SYNC and something (error msg) happened.  I tried to continue the SYNC and now my IPhone is dead.  All I can get when I turn it on is a picture, from bottom  to top, I have an WSB connector, an up arrow, and an iTunes icon.  I can't use the phone.  And it's my only phone.  What can I do to rectify this situation.

    It's telling you to connect to ITunes and restore your phone. This will have to be done with a USB cable and iphone connector that came with your charger.

  • When we go to view albums from our iphoto library on apple tv it takes forever to load and then it only plays between 24 and 35 photos then goes back to the start.  Then it goes through again and displays 1 more photo each time. Please help!

    When we go to view albums from our iphoto library on apple tv it takes forever to load and then it only plays between 24 and 35 photos then goes back to the start.  Then it goes through again and displays 1 more photo each time. Please help!

    It's likely that your Library database has been damaged in all the crashing.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • I added some songs to my itunes but now my itunes won't play the songs - it says it can't locate the song although the Itunes match is turned on and it says all of my songs are in the cloud - anyone have any thoughts

    i added some songs to my itunes but now my itunes won't play the songs - it says it can't locate the song although the Itunes match is turned on and it says all of my songs are in the cloud - anyone have any thoughts

    Did you delete the hard copy of the songs from your computer after you uploaded them?
    If so just highlight the said songs and delete but do not check the box that says delete from iCloud and your songs should play fine. 
    This happens when the original file is moved from the location that itunes was looking for it at and if you did this because you uploaded it then it will still be in the cloud you just need itunes to read from cloud and not think it's supposed to be finding the original file

  • I Connected My IPad 1st Generation To The Computed To Have It updated And I Lost All of My Pictures, How Do I Get Them Back?? Help, Please!

    I Connected My IPad 1st Generation To The Computed To Have It updated And I Lost All of My Pictures, How Do I Get Them Back?? Help, Please!

    Did you backup the iPad first? If you did - restore from the backup in order to restore the photos in the Saved Album on your iPad. If the photos were synced to the iPad, then sync them back again via iTunes.
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    If you did backup first, you will be restoring your most recent backup and you should be OK. But know that when you restore from a backup, you restore everything that is in that backup onto the iPad .... All documents, device settings, all data and so on. You cannot just select photos to restore to the iPad. It's all or nothing.

  • HT1212 I just updated my Ipad 2 to IOS7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. I tried using the OIS7 passcode I use on my Iphone  and it did not work and now my Ipad is disabled

    I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I  tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode

    I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
    I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring.

  • Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

    Hi,
    Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
    Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
    I have done some Google and found that we need to add something in Essbase.cfg file like below.
    1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
    Possible Problems
    Analytic Services could not lock enough blocks to perform the calculation.
    Possible Solutions
    Increase the number of blocks that Analytic Services can allocate for a calculation:
    Set the maximum number of blocks that Analytic Services can allocate to at least 500. 
    If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
    In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
    Stop and restart Analytic Server.
    Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
    Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting. 
    Determine the block size.
    Set the data catche size.
    Actually in our Server Config file(essbase.cfg) we dont have below data  added.
    CalcLockBlockHigh 2000
    CalcLockBlockDefault 200
    CalcLockBlocklow 50
    So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work?  and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
    Regards,
    Naveen

    Your calculation needs to hold more blocks in memory than your current set up allows.
    From the docs (quoting so I don't have to write it, not to be a smarta***:
    CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
    When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
    Example
    If the essbase.cfg file contains the following settings:
    CALCLOCKBLOCKHIGH 500  CALCLOCKBLOCKDEFAULT 200  CALCLOCKBLOCKLOW 50 
    then you can use the following SET LOCKBLOCK setting commands in a calculation script:
    SET LOCKBLOCK HIGH; 
    means that Essbase can fix up to 500 data blocks when calculating one block.
    Support doc is saying to change your config file so those settings can be made available for any calc script to use.
    On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

  • I have updated my ipod and it deleted everything including my photos and i did not save my photos on any other device, How do i get them back?

    I have updated my iPod and it deleted everything including my photos and I did not save my photos on any other device, How do I get them back?

    You didn't import all of your pics regularly?  Particularly before an update?
    They may very well be gone.
    You can try restoring from backup.

  • Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

    Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

    Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
    If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
    To remove the image capture preferences:
    If Aperture is running, quit Aperture,  and log off and on again.
    Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/  then hit return.
    In the window that opens remove "com.apple.ImageCapture.plist"
    and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture  something .plist  remove them too.
    then try again.
    And if that still does not help, remove the Aperture preferences as well:
    ~/Library/Preferences/aperture.plist
    Regards
    Léonie
    P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
    You can reveal it also  from the Finder's "Go" menu:
    Finder > Go,   then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

  • I recently had to get a new computer.It required me going from windows xp to 7 I am trying to put it one the new computer but I get following message  Windows installer could not be accessed could be in safe mode.How do I get around it? need it to charge

    I recently had to get a new computer.It required me going from windows xp to 7 I am trying to put it one the new computer but I get following message  Windows installer could not be accessed could be in safe mode.How do I get around it? need it to charge my ipod on my computer.

    I have used PCs for years, and still do at work.  But, last year my wife bought me a 15" MBP with the anti-glare screen (I was getting ready to buy for myself).  It took me all of 1 week to completely get used to the UI for OS-X, and now I really prefer it over the Win7 UI.  I have no experience with Win8.  Here are my thoughts:
    1) You can get a good computer using either a Win8 machine or a Mac.
    2) You will pay less for an equivalent PC.  But not as much less as some would have you believe.  You need to take into account the all aluminum body of the Mac (vs most PCs being plastic) and the size of the display.  And, don't forget that there is a lot of bundled SW on the Mac that you will actually find useful and would have to purchase for the PC.
    3) You can probably do everything you need on the PC platform with the right SW (you probably already know this since you are using one already).
    That said, I think some things are easier on the Mac.  For example, GarageBand is a standard part of the Mac SW installation.  I got up and running recording directly from my bass into a track with a song imported from iTunes on another track in a snap.  I only had to purchase a Jam adapter ($99) for the bass so I could come in over USB instead of using the audio in port (which did work, by the way).  You can do the same on a PC, but you have to purchase the SW from somewhere.  And, it probably isn't cheap.
    I use VMware Fusion to run those Win programs I already owned because it was much less expensive to buy Fusion than to replace them.
    I would not return to a PC for my own use, given a choice.  But, I would be very careful about getting my wife a Mac without careful thought as she is not as tolerant of learning new things as I am.
    So, there you go.

  • Can rent a movie from the iTunes store on my computer, and then stream it to my apple TV (2nd gen)?

    Can rent a movie from the iTunes store on my computer, and then stream it to my apple TV (2nd gen)?

    Thank you alleycat. I have two rental movies in my iTunes library in the rentals section top left of the window that have not been played. I have home sharing turned on on both my apple TV and my Mac. Both machines are completely software updated. I can see all of my owned movies in the Computer>Library>Movies section of the menus, but neither the rentals themselves nor a rental fouler are anywhere to be found on the apple TV. I dropped by the apple store on the way home from work and they suggested that it should be working just as you described, and suggested a restore, which I've performed. Still no rentals from the Mac library are visible on the apple TV. Any ideas?
    Riversmith

Maybe you are looking for