I created project save as image but final project doesnt show up anywhere

i stayed up literally all night working on a christmas slide show project
i already saved it as an image file once
woke up and stated it was complete
great
went to burn it
however its not anywhere on my computer
stated if finished in 48 minutes
ok where is it
not where i selected it to save
this is odd
i have done this before no problem
other than beginners bad luck
the think is i am saving it now
and my hard drive light is flashing
set it save to a folder
however its not there
disc space is being used
and on my last one
disc space was taken
yet its not there
i did a search on my computer for it
the title
even did a .img search
nothing
ok its doing all the work
where exactly is it going?
i save it as an image
burn thru external hard drive
as i said before
it stated complete
ok where was it completed to?

If you haven't done any other projects in iDVD, open it and Save As Disc Image again -- but before you click Okay, look to see where iDVD wants to store the file -- chances are that's where the others are stored.
John

Similar Messages

  • I deleted my note by accident i do have notes on icloud. so i had half the note saved but the other half was very important and hard to right. i restored my ipod on i cloud back up but it still doesnt show i put so much time in that anyway to get it back?

    i deleted my note by accident i do have notes on icloud. so i had half the note saved but the other half was very important and hard to right. i restored my ipod on i cloud back up but it still doesnt show i put so much time in that anyway to get it back?

    How did you delete the Note? If you did a "select all" and "cut", open the Note and shake your iPhone to undo the cut action.

  • I recently had my iphone 4s screen repaired because the screen was cracked. It was all ok and then a few weeks later something strange happened. My touchscreen works, but the screen doesnt show, you can see the light in the background but no picture?

    I recently had my iphone 4s screen repaired because the screen was cracked. It was all ok and then a few weeks later something strange happened. My touchscreen works, but the screen doesnt show, you can see the light in the background but no picture? has anyone got any ideas as to what the problem is, is it self-repairable or even repairable at al?

    The LCD Display connector has partially come loose from the logic board connector, and simply needs to be pressed back down into place. Or the front screen assembly is now faulty, and needs to be replaced again.

  • Flash Builder flash pro project doesnt show code hintings for library assets exported for AS ?

    Flash Builder flash pro project doesnt show code hintings for library classes exported for AS ? So is there any way I can fix this ? Only way I could think of is export a swc from the fla... is there a more convenient way to do this ?

    anyone ?

  • My itouch camera will not work. sometimes the shutter wont even open. other times it opens but the camera doesnt show anything but a black screen. how do i fix this??? please helpp

    My itouch camera will not work. SOmethimes the shutter wont even open. other times it opens but the camera doesnt show anything but a black screen. how do i fix this???

    Basics from the manual are restart, reset, restore.

  • TS3367 My iphone 5 does not show facetime icon in settings, i know there is no app on iphone for facetime but there is facetime in settings but my iphone doesnt show facetime in settings

    My iphone doesnt show facetime in settings, i can not turn on/off facetime. Please tell me how to fix this, i also have restrictions off.

    Thank you for the information... Here is the Bad News...
    iPhones sold in Saudi Arabia and several other countries have FaceTime disabled.
    Sorry... But... This CANNOT be changed.
    See this Discussion  >  https://discussions.apple.com/message/15858866
    More Info here  >  FaceTime in the Middle East

  • HT1657 i rented the twilight movie, how the heck do i watch it. it doesnt show up anywhere!! but says i rented it . i did it yesterday. help !!i am so frustrated!!

    i rented the twilight  movie, how the heck do i watch it. it doesnt show up in my library but says i have it rented.

    Go to your music library on itunes, click on the box in the top-left corner of your window that says Music, once you do this there will be an option to click on movies, click on it, and then there will be a little bubble near the top of your window that says rented, click on the bubble, and that will take you to your rented library.
    Note: For itunes 11.0.1 and up.

  • Can apple fix my broken ipodtouch 4g if you can hear the sound but the screen doesnt show

    can apple fix my broken ipodtouch 4g if you can hear the sound but the screen doesnt show

    They will not fix it. What they do is replace rather then fix.
    After Apple has examined it, they will determine if it is covered by warranty or not. If it is not, you will have to pay for the replacement.
    Allan

  • Save as Image, but modify file name From Page_[0-9]+.jpg to -%04d.jpg

    I have a PDF that was compiled from multiple tiffs of a scanned document. The Tiffs are no logner around, and we want to regenerate them from Acrobat. Easy enough. However, we cannot adjust the padding on the file name.
    For example we save a 10 page document as document1.jpg will result in jpg's saved as the following: document1_Page_01.jpg, document1_Page_02.jpg, etc.
    If the document was 100 pages it would save as: document1_Page_001.jpg, document1_Page_002.jpg, etc.
    I am comfortable writing a bash,python, or some other script to rename all these files to %04d (0001,0002.jpg), but ideally is there anyway to accomplish this from acrobat.

    You could try the basic DOS rename utility. However, it may only work with the short name version of the files, not the long names. Go to a DOS window and type "rename /?" without the quotes to get information on the process. You can typically use standard placeholders in the file names. Some DOS commands will deal with long file names if you enclose them in quotes, but I doubt it here. There may be some windows utilites available that can also do this.
    The use for multiple documents is documented at http://www.lagmonster.org/docs/DOS7/z-ren1.html and that might help give you ideas. I would suggest you copy some of the files to a test folder to try things out. In fact, I would suggest you do all the processing on a copy or your original folder of files.

  • My husband and I had been sharing an iTunes account, which resulted in his apps and music being synced to my iPhone and mine to his. . . very annoying.  So I created a new iTunes account, but now no devices show up in the sidebar so I can't sync my phone.

    My husband and I had been sharing an iTunes account, which meant that when he synced his iPhone, all his apps and music appeared on mine as well, and vice versa.  This was annoying, so I created my own account and have changed the Apple id on my phone.  However, when I try to sync it on iTunes, no devices at all show up in the sidebar.  What am I doing wrong?

    Whenever a menu choice is grayed out, that is because you have Restrictions turned on in Settings.  Be sure to turn it off.
    You are confusing an itunes store account with an icloud account.  You two can continue using the same ID for itunes (thus sharing purchased music, apps, etc.), but you really should have separate accounts (different IDs) for icloud, since an account is intended for one user to keep his/her devices in sync.
    To create a new icloud account, go to
    http://www.apple.com/icloud/setup/
    Then go to Settings>icloud and scroll to the bottom of the screen and tap Delete Account.  (have restrictions turned off)  That will disconnect the device from the account but will not delete data in icloud or other devices.  Then sign in using the new ID.

  • To save chat history but it must not show on contacts

    I want to save the chat history's and know how to do it,but I don't want it to show on my contacts is there a way I can take it of that it doesn't show or do it on a other way that it can save on the memory card or device.

    pleeease a little help to 10 guys........ :-)

  • Created a new user profile but it does not show on Login screen or fast sw

    I have created a new profile that I want to be an admin profile. The creation of the profile went ok. I can see and edit the profile. When I reboot or logout, the login menu only show the inital profile that I set up when I got the system. The new user id also does not show up when I go to my fast switch menu.
    My original user id is set to automatically logon when the system is started. I did try and set the new userid to be the one that started automatically on bootup and then both profiles appeared in the startup menu and fast switching menu.
    If I switch back to having my original user id be the id that automatically logs in on bootup then the new user id disappears again from the login and fast switch menus. I really don't want to startup on my admin id.
    Any ideas?

    No not yet. I am still researching the problem. I was hoping someone in the discussion forum could help. Let me know if you find a resolution.

  • Scanned document but it doesn't show up anywhere...

    Everything seems to connect and work but after the scanning is done both computer and scanner (Brother MFC 7820n) just sit there...nothing loaded Preview or anywhere else.
    Any suggestions???

    You're welcome.
    ...but can you tell me how to set a destination folder?
    I think I am using brother control center but I just see a "scanning" dialog box on my screen during the process.
    Based on what you wrote, I gather that you invoke scanning on the Brother machine. That is fine, but to set preferences...
    1. Is there a Control Center icon on your menu row? It looks like a mini version of the following:
    If no, you can launch the app from HD/Library/Printers/Brothers/Utilities
    If yes, click the menu icon and select Open
    2. In the Control Center window, click the button Configuration, then the popout option SCAN, and then the popout option File.
    3. In the Scan to File window, you should see parameters for setting File name file, File type, and Destination Folder. There is also a check box for "Show Save As window" which would allow you to customize the destination for each scan. Click image below to see larger version.
    Note: The above is based on OS 10.5.8 and although my memory is rusty, it is very similar in OS 10.4.x
    HTH and Thanks for the star!

  • HT1386 my device is plugged in to power, my computer and iPhone are both on the same Wi-Fi network, but my phone doesnt show up

    I have a 16 gig iPhone 4s with AT&T and a PC on windows 7 ultimate. i just updated it to iOS 5.1.1 and now it doesnt appear in itunes. it appears when the device is plugged into the computer but not at any other point does it. i restarted my PC, my iPhone and my router and nothing changed a thing. i re enabled Wifi sync and i re installed iTunes. Nothing has worked !! Please help !

    Actually I think we need to wait on an update from iTunes to update its compatability with the new iPhone software. They usually release a new version of iTunes with the iOS. So I hope to see an update from apple by the end of the week or maybe even today.
    Needless to say. I am experiencing the same issue as well. I've tried all the proposed fixes listed above. It's gotta be a software compatability issue.

  • My ipod connects to my laptop and shows up in My Computer but it doesn't show up anywhere in ITunes. HELP

    My ipod connects to my computer, and shows up in My Computer so i can access the photos but not in ITunes so i cant access my music and movies, ive tried trouble shooting and the other suggestions from this site but nothings working. It hasn't always done this, it did use to show up in ITunes

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

Maybe you are looking for