I currently have a DELL Inspiron E1707 Laptop and I conne...

I currently have a DELL Inspiron E1707 Laptop and I connect to the internet via my Linksys WRT54GS Wireless Router.  For the past 2 days I can connect to the internet but sites take forever to load or just don't load at all.  I went to Intel PRO/set Wireless Troubleshooter and the event viewer says:  CTA Plugin is not installed or supported.  I have googled this problem and still have not found a solution or where I can install the plugin.  I did find that this is somewhat common and has to do with the CISCO system/Linksys Router.  I hope one of your specialists has a solution to this problem.  Please get back to me regarding this issue.  Thank You!

Change the wireless channel from 6 to 9 ...
Also under advanced wireless settings you can change few more settings ....
Change the Fragmentation
Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings"....

Similar Messages

  • I have a Dell Inspiron 530S computer and a Dell Photo 926 printer. Using Firefox with the printer, how do I scan a blank form into the computer and fill it out there and then print out the completed form with the printer?

    Basically, the problem arose when I got a package from the Veterans Administration requiring me to fill out some complicated forms. Using my equipment and Firfox, I have been unable to do it.
    == This happened ==
    Not sure how often
    == I applied for Agent Orange evaluation

    That's not really a Firefox support issue.
    Check with Dell support and ask if the scanner software is capable of saving the form as an actual form, instead of as an image as most scanners do.

  • Dell Inspiron 1300 laptop wont connect to router anymore

    Eveything was great untl I had to change the encryption code on the router, now I cant get the laptop to connect to the router anymore. Nothing was changed on the computer and the only thing that was changed on the router was the encryption code. The Dell laptop has a 1370 mini wireless card in it running windows XP, and I updated it last night to the latest driver. My Dell Inspiron 1525 laptop has no problem connecting to it. The wireless router is a WRT54GS. I have also started wireless zero configuration and checked the box to let windows control my wireless. And the box in properties that says "Enable IEEE 802.1authentication for this network" is not checked.
    Sometimes when I try to connect it, it will say connected when it isnt connected to anything. Other times when I try to connect it will connect to another wireless internet in the neighborhood that doesnt have any encryption. And then other times I get the message that says "windows was unable to find a certificate to log you on to the network". I got it to connect when I took the the encryption off the router but for some reason it doesnt want to connect with encryption on it. I am using WEP 64bit. I checked all the settings on both the laptops and the wireless settings are exactly the same. I dont understand why mine will connect and the other one wont.  Any ideas?

    You can try manually adding the network on your computer, Also change the SSID on the router if it is linksys(default).
    To add the network manually try the below mentioned settings.......
    Click on Start and go to the Control Panel and double click on Network Connections, right click on Wireless Network Connection disable it and then Re-enable it .
    Right click on Wireless Network Connection and click on Properties,Now on this window, click on the second tab Wireless Network and give a check mark on "Use windows to configure my wireless" and then remove all the network names present in the Preferred Networks Window. Then click on OK...
    Right click on the Wireless Network Connection again and click on View Available Wireless Networks and try to re-connect to your network...
    Now it will give you the opportunity to put the network/security key, make sure you enter the correct network key and confirm it...
    It will connect...
    That should resolve the issue for you.

  • Dell Inspiron 5547 laptop touch pad issue

    I have Dell inspiron 5547 laptop. I have touch pad issue. Touch pad is looks it's working but It's not working properly. I can't click on file or any where else. I call dell for support they first uninstall all drivers for Touch pad and re install it. After that it works goods for 2-3 days and once again problem is same.
    After that I call once again dell support and they send technician to my house to change touch pad after he change, in few days problem is same.
    After that I send my laptop to support center and after getting system back I have same issue.
    so I call once more times and they send technician to change hard drive with inbuilt OS. After that In just 2 days I have same problem. Now I request dell to replace my system and I am waiting for their approval But If any One have Any solution then please Reply me 
    Thank you

    Hi Raj7108,
    I would advise you to download and install the ‘TouchFreeze’ software from the link below and check for issue resolution.
    http://bit.ly/oS0Hd
    Please let me know if this helps.

  • HP ELite L2201x and Dell Inspiron 1525 laptop?

    Hi, I bought an HP Elite L2201x Monitor, and I want to connect it to my Dell Inspiron 1525 laptop. 
    I got a display port to HDMI port cable but my laptop doesn't recognize at all the HP monitor, it is like if it were not there!
    Any advice? I thought about using the port I use to conect to a proyector, but idk if that makes sense at all!
    Thanks for your help!!!

    >I got a display port to HDMI port cable but my laptop doesn't recognize at all the HP monitor, it is like if it were not there!
    display port and HDMI are two completely different solutions.
    Also a display port source can deliver hdmi signals (so this way the cable will work), a hdmi source often (always?) can't support dp signals.
    This is how I understand this FAQ:
    From http://www.displayport.org/faq/;
    Q: I am the owner of a new 27″ iMac, which I was planning to use as a high- resolution display for an HDMI equipped Blu-Ray player. I have purchased the DP-to-HDMI adaptor after being advised by Apple technical that it would function as an input, but having tried it, discovered that the device will only OUTPUT. My question is, why won’t the adaptor pass signal the other way, and what is the adaptor doing if it’s not powered, and it’s tiny, that it can’t do backwards?
    A: DisplayPort-to-HDMI adaptors and DisplayPort-to-DVI adapters are very simple and only operate one way. For instance, when a DP-to-HDMI adaptor is connected to a PC that supports DP++ (multimode) capability, the PC senses the presence of the adaptor and sends HDMI signals over the DisplayPort connector rather than DisplayPort signals. No signal conversion is performed by the HDM adaptor. HDMI signals are merely passed through. The unique DisplayPort adaptor capability enables the PC to connect to a variety of displays via the DisplayPort connector including HDMI, DVI, and VGA. VGA adaptors are more complex and perform active signal conversion from DisplayPort to VGA. These adaptors also operate only one way. Unfortunately, HDMI does not support conversion to other display formats as does DisplayPort.
    HTH
    V.
    *** Say 'Thanks' with Kudos ***

  • I have a Dell Inspiron 1545 and I can't download Adobe flash or Adobe acrobat reader, when I try to play my games it says update flash and when I try to download it the screen comes up blank

    I have a Dell Inspiron 1545 and I can't download Adobe flash or Adobe acrobat reader, when I try to play my games it says update flash and when I try to download it the screen comes up blank

    Try the offline installers:
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    For Adobe Reader: http://get.adobe.com/reader/enterprise/

  • We currently have two ipods on my laptop.Last week we purchased another laptop. Both laptops use the same email address. I'm not sure what to do so he can now use his ipod on the new laptop. Please give specific instructions.

    We currently have two ipods on my laptop (my laptop Vista). Last week we purchased another laptop(Windows 7). Both laptops use the same email address.I'm not sure what to do so he can now use his ipod on the new laptop. Please give specific instructions.

    Copy everything from the old computer to the new one.

  • Strange bluetooth problem dell inspiron 1545 laptop

    Hello friends, I've got a full working install of arch on my dell inspiron 1545 laptop. At first, bluetooth was working with the blueman-applet. After an upgrade to bluez(i suppose), it suddenly stopped working. The laptop bluetooth is on, the device is discoverable, it even successfully recognizes the phone I'm trying to pair. But earlier, it was showing the phones name but now it only shows the mac address in blueman and in "hcitool scan" output, it shows:
    hcitool scan
    Scanning ...
    00:1B:EE:16:63:5E n/a
    I've got the following bluetooth services running:
    bluetoothd hidd rfcomm
    Here my /etc/rc.d/bluetooth file:
    #!/bin/bash
    # Start/stop the Bluetooth daemons
    . /etc/rc.conf
    . /etc/rc.d/functions
    DAEMON_NAME="bluetoothd"
    HIDD_NAME="hidd"
    RFCOMM_NAME="rfcomm"
    PAND_NAME="pand"
    DUND_NAME="dund"
    DAEMON_EXEC="/usr/sbin/bluetoothd"
    HIDD_EXEC="/usr/bin/hidd"
    RFCOMM_EXEC="/usr/bin/rfcomm"
    PAND_EXEC="/usr/bin/pand"
    DUND_EXEC="/usr/bin/dund"
    DAEMON_ENABLE="true"
    HIDD_ENABLE="false"
    RFCOMM_ENABLE="false"
    DUND_ENABLE="false"
    PAND_ENABLE="false"
    RFCOMM_CONFIG="/etc/bluetooth/rfcomm.conf"
    HIDD_OPTIONS=""
    DUND_OPTIONS=""
    PAND_OPTIONS=""
    [ -f /etc/conf.d/bluetooth ] && . /etc/conf.d/bluetooth
    case "$1" in
    start)
    stat_busy "Starting bluetooth subsystem:"
    if [ "$DAEMON_ENABLE" = "true" -a -x "$DAEMON_EXEC" ] ; then
    stat_append " $DAEMON_NAME"
    $DAEMON_EXEC
    sleep 1
    fi
    if [ "$SDPD_ENABLE" = "true" -a -x "$SDPD_EXEC" ] ; then
    stat_append " $SDPD_NAME"
    $SDPD_EXEC
    fi
    if [ "$HIDD_ENABLE" = "true" -a -x "$HIDD_EXEC" ]; then
    stat_append " $HIDD_NAME"
    $HIDD_EXEC $HIDD_OPTIONS --server
    fi
    if [ "$RFCOMM_ENABLE" = "true" -a -x "$RFCOMM_EXEC" -a -f "$RFCOMM_CONFIG" ]; then
    stat_append " $RFCOMM_NAME"
    $RFCOMM_EXEC -f $RFCOMM_CONFIG bind all
    fi
    if [ "$DUND_ENABLE" = "true" -a -x "$DUND_EXEC" -a -n "$DUND_OPTIONS" ]; then
    stat_append " $DUND_NAME"
    $DUND_EXEC $DUND_OPTIONS
    fi
    if [ "$PAND_ENABLE" = "true" -a -x "$PAND_EXEC" -a -n "$PAND_OPTIONS" ]; then
    stat_append " $PAND_NAME"
    $PAND_EXEC $PAND_OPTIONS
    fi
    add_daemon bluetooth
    stat_done
    stop)
    stat_busy "Stopping bluetooth subsystem:"
    stat_append " $PAND_NAME"
    killall $PAND_NAME >/dev/null 2>&1
    stat_append " $DUND_NAME"
    killall $DUND_NAME >/dev/null 2>&1
    if [ -x "$RFCOMM_EXEC" ]; then
    stat_append " $RFCOMM_NAME"
    $RFCOMM_EXEC release all >/dev/null 2>&1
    fi
    stat_append " $HIDD_NAME"
    killall $HIDD_NAME >/dev/null 2>&1
    stat_append " $SDPD_NAME"
    killall $SDPD_NAME >/dev/null 2>&1
    stat_append " $DAEMON_NAME"
    killall $DAEMON_NAME >/dev/null 2>&1
    rm_daemon bluetooth
    stat_done
    restart)
    $0 stop
    sleep 1
    $0 start
    echo "usage: $0 {start|stop|restart}"
    esac
    exit 0
    Here goes the /etc/conf.d/bluetooth file
    # Bluetooth configuraton file
    # Bluetooth services (allowed values are "true" and "false")
    # Run the bluetoothd daemon (default: true)
    #DAEMON_ENABLE="false"
    # Run the sdp daemon (default: false)
    # If this is disabled, hcid's internal sdp daemon will be used
    #SDPD_ENABLE="true"
    # Run the bluetooth HID daemon (default: false)
    HIDD_ENABLE="true"
    # Activate rfcomm ports (default: false)
    RFCOMM_ENABLE="true"
    # Run bluetooth dial-up networking daemon (default: false)
    DUND_ENABLE="true"
    # Run bluetooth PAN daemon (default: false)
    PAND_ENABLE="true"
    # rfcomm configuration file (default: /etc/bluetooth/rfcomm.conf)
    #RFCOMM_CONFIG="/etc/bluetooth/rfcomm.conf"
    # Options for hidd, dund and pand (default: none)
    #HIDD_OPTIONS=""
    #DUND_OPTIONS=""
    #PAND_OPTIONS=""
    DAEMON_ENABLE="true"
    HID2HCI_ENABLE="true"
    The output of lsusb | grep -i bluetooth
    Bus 003 Device 014: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
    Output of dmesg | grep -i bluetooth
    Bluetooth: Core ver 2.15
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP ver 2.14
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    Bluetooth: SCO (Voice Link) ver 0.6
    Bluetooth: SCO socket layer initialized
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM ver 1.11
    Bluetooth: Generic Bluetooth USB driver ver 0.6
    any help regarding the problem is highly appreciated.
    [Edit] I tried doing /lib/udev/hid2hci(weird location i guess), but its asking me to enter sys device path which I've absolutely no idea of.
    Last edited by pratik_narain (2010-07-23 03:54:49)

    Bumping in hope for a reply

  • My Dell Inspiron runs Vista, and I cannot change the home pages on my browser

    I have a Dell Inspiron 530S running Vista. I updated Firefox to 5.0. I want to change the home page for one of the tabs. I change the tab to what I want, I go to Options - General - Use Current Page, and it seems to register. I then close Firefox and reopen it. When I do this, I get the old home page - not the one that was on the screen when I selected Options-General-UseCurrent Page on that tab.
    What do I do in order to have that tab come up with the page I want when I invoke Firefox?

    Make sure it says "'''Show My Home Page'''" in the first dropdown menu at the top before you try to change it.
    See also: [[How to set the home page]]

  • I have windows 7 on my laptop and i can't get my songs to work.

    I have windows 7 on my laptop and the current version of iTunes. For the past two days I cannot play songs from my music or purchased list. I can't even play the sample of a song in the iTunes store. I click on play on it does nothing. What's wrong?

    Another standard diagnostic step is to try Firefox's Safe Mode to see whether it is caused by a custom setting or add-on.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in [http://support.mozilla.org/kb/Safe+Mode Safe Mode] using
    Help > Restart with Add-ons Disabled
    In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
    Does Firefox behave any better?

  • Can i use adobe cloud on more than 1 computer as i have an imac a windows laptop and a macbook ?

    can i use adobe cloud on more than 1 computer as i have an imac a windows laptop and a macbook ?

    Yes, You can install and use the Adobe application on 2 computers (not more than 2).
    You can get the details, http://www.adobe.com/products/creativecloud/faq.html
    Can I use the software I download from Creative Cloud on multiple computers?
    Yes, you can use Creative Cloud desktop applications on two computers at once, regardless of operating system, for the individual associated with the Creative Cloud membership. See theproduct license agreements page for more information.

  • I currently have a WPN824 v3 Netgear router and I'm trying to set up my Apple TV. I'm able to connect it to my wireless network but my airplay feature is currently not working.

    I currently have a WPN824 v3 Netgear router and I’m trying to set up my Apple TV. I am able to connect it to my wireless network but my airplay feature is currently not working. The icon does not appear on any of my devices. My ipad and ipones all are currently up to date and are all joined to the same network. Is it the way that my router is configured. Please help let me know what I need to change in my router settings or does my router not work with Airplay. Or is there a simple fix.

    you don't mention which products you use
    only ipad2 and up support mirror
    and only iphone4s and up support mirror
    other devices only use airplay for apps which support tvout options

  • Hi, I have recently bought a new laptop and when I went to add new songs to my iphone and ipods and there is no music there when i signed into my account on itunes.  How do I get it on there?

    Hi, I have recently bought a new laptop and when I went to add new songs to my iphone and ipods and there is no music there when i signed into my account on itunes.  How do I get it on there? thanks

    Copy the entire iTunes folder (not just the music folder) from your old computer to your new one, using one of the methods outlined here: http://support.apple.com/kb/HT4527.

  • Can someone please help!!! me i have a HP Pavilion dv6636nr laptop and no sound

    i have a  HP Pavilion dv6636nr laptop and were my sound icon is located it  has a (x) on it and it says no audio output device is installed I've tried everything i download the audio driver from hp ssoftwear & downloads and i get a error msg that  reads driver installation failed :could not find the device for this driver can someone pleaseeeessss!!!!!!!!!!!!!!!! help

    someonehelpmaddy wrote:
    My Mac knows that it is connected to the montior...
    Open your Displays system preferences.  Is there an Arrangement tab and does it show two screens?  If no Arrangement tab then your mac does not know it has two screens.  Maybe smc and pram reset will shake it free and maybe not.  Maybe there's something wrong with the connection.  Thunderbolt plugs are similar to mini-displayport plugs so make sure the plug is pushed firmly in so that essentially all the metal part disappears inside the socket.  The plugs can be a little tricky in that you need to make sure the plug is fully seated in their socket.
    If you do see two screens in the Arrangement tab then click Detect Displays and Gather Windows to get the Displays preferences of the other monitor on to your main monitor.  Check the resolution and if there is a refresh rate check that as well.

  • HT201210 I updated iTunes on my Dell Inspiron lap top and it corrupted my iTunes. I uninstalled all of the newly installed files.  I also uninstalled iTunes.  Now whenever I try to install iTunes, I ge a message that saya, "An Apple Application support is

    I updated iTunes on my Dell Inspiron lap top and it corrupted my iTunes. I uninstalled all of the newly installed files.  I also uninstalled iTunes.  Now whenever I try to install iTunes, I get a message that says, "An Apple Application support is required to run iTunes on this computer. Please uninstall iTunes, then install iTunes again."
    Tried it 2 times and no luck.  Any advice for me?
    Maureen

    I get a message that says, "An Apple Application support is required to run iTunes on this computer. Please uninstall iTunes, then install iTunes again."
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Maybe you are looking for