I'd appreciate any help setting up my SPA 2102 w/ my D_Link wireless DIR 601
hello all
Not sure if this has been addressed before...
i found this link but my setup is slightly different.
http://forums.linksysbycisco.com/linksys/board/message?message.uid=227491&comm_cc=US&comm_lang=en
presently, I have a dry loop phone line---> speedtouch DSL modem---> D-Link DIR-601 and the LAN 1 going out 2 the main computer and LAN 2 going out 2 the SPA 2102
I can get my D-Link system working fine w/o the SPA or I can just hook up the SPA w/o the D-Link and then both phone/internet works fine.
Both have been registered separately using the 192.168...addy
but getting the Internet/VoIP/Wireless has been impossible....so far...
any suggestions???
thx in advance,
B.
Message Edited by MIIM on 03-27-2010 03:48 PM
Basically you're cascading 2 routers. If that is so, you're creating double NAT network. As much as possible, it is recommended to connect the SPA2102 as a primary router because Voice requires more bandwidth.
This should be your network setup: DSL Modem - to the WAN port of SPA2102 - to the WAN port of the Dlink router.
If I'm not mistaken, these 2 devices are having the same IP. Change the LAN IP of the Dlink router from 192.168.0.1 to 192.168.1.1.
Similar Messages
-
i'm trying to add an email account and followed on screen directions but after "verifying account" screen i got "new account" and no options highlighted but "cancel" The mail server is our local phone company. Appreciate any help.
Hello there, shallotte07.
The following iPhone Troubleshooting Assistant should get you through all the steps to set up mail:
Apple - Support - iPhone - Setting up Mail Assistant
http://www.apple.com/support/iphone/assistant/mail/http://www.apple.com/support/iphone/assistant/mail/
Remember that some Service Providers require particular settings, and you may need to contact them directly to acquire that information. Check out the "Email cheat-sheet" section in the information that follows:
If iPhone can't find your service provider's settings, this article can help you obtain the necessary account settings from your provider.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.
You can go to the Apple online store and purcahse a copy of Mountain Lion. This will give you a redemption code, which you can use to download Mountain Lion from the App Store. Unfortuantely, I'm not aware of any other way to legally purchase it. I have never seen Apple release Muontain Lion on DVD.
In terms of Apple Service, they just need the serial number of the machine to check the purcahse date. It is usually correct, to within a few weeks. A quick Google search should give you the correct number to dial.
I hope this helps. -
I have installed Mountain Lion 10.8.1 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.
I would delete the account and try to re-enter it. Also, you have to let your firm's IT department know that you want to sync work email on your personal devices before they actually work.
-
I am trying to restore my iphone3g but I can only get to item 8 and then it stops and says ( could not be restored unknown error occured)
I cannot get to step 9 to complete restore and to reactivate my phone...I would appreciate any help thank You krisi do that but it keeps getting stuck on the 'preparing to restore i phone' screen for a few mins before coming up with 'unknown error 1603'.
Just doublechecking. Have you worked through the 1603-specific instructions from the following document?
[Update and restore alert messages on iPhone and iPod touch|http://support.apple.com/kb/TS1275] -
My camera Canon G3 (i know it's old) no longer connects to iPhoto (8.1.2) on my iMac, I have checked with my friends iMac same model iPhoto version and it works fine using my cable, I would appreciate any help getting this sorted
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
My dynamic form - issue with saving data (urgent-i would greatly appreciate any help)
Hello,
I have some problems with this dynamic form (created in livecycle) http://www.pathology.ubc.ca/Academic_Activity_Data_Form_Jan_4_2013.pdf . It doesn't save data unless I add a' new row' to any of these tables. There are a few text fileds and if I type anything in there data won't be saved unless I trigger it by adding randomly a table row. This is big problem as this form will be used for updates and if I want to change any of my entered records I will always have to remember to 'add a new row' otherwise just adding/changing text won't be saved. This might sound confusing but you will understanding what is going on if you type in your name and save the form and then type in your name, add a table row and save the form (first case won't be saved second will).
I would greatly appreciate any help.
DebbieHi Marco Russo ,
= CALCULATE (
SUM ( [measure] ),
PARALLELPERIOD (
SAMEPERIODLASTYEAR ( DateTime[DateKey] ),
0,
QUARTER
I have used the above DAX function it is working fine and i have applied same for Year , Quarter and Month
But when i remove month filters (Slicer) and Year filters in Power view report
it is showing total Year values for Year and Quarter values
for Quarter etc..
Like below i am getting
Last Yr Month Amt Current Yr Month Amt Last Yr Qtr Amt Current Yr Qtr Amt Last Yr Current Yr
10000 30000 10000 30000
30000 30000
but i need Blanks in report if i am not selecting any filters
thanks,
Sreeni -
I am unable to use Muse in-browser editing. I have followed the activation instructions both in Muse and invited users. I have an active site, but when I enter my site URL plus /admin, the graphic dots move but the site goes nowhere and I am never given a chance to enter my email and password. I would greatly appreciate any help. I am thanking you in advance, Bleu
I'd keep trying the other way. You may have hit it when BC was doing an update or something. If it works one way it should work the other way. But sometimes BC can be kind of temperamental and you have to do a little dance or something to get it to work. But it generally comes around and fixes itself in short time.
Have you tried the other way again? -
hi, photoshop crashed and the file I was previously working in, on the same version of Photoshop says "Could not complete your request because the file is not compatible with this version of Photoshop." I'll appreciate any help. Thank you.
CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras -
Iphoto diet & iphoto 6 error!! would appreciate any help/feedback
I recently installed iPhoto 6.0.6. and since then, when I run iPhoto Diet (3.1) an apple script error message comes up.
It says: File alias Macintosh HD:Users:michellechin:Pictures:iPhoto Library:Modified: wasn't found. (-43)
HELP! what does this mean? and how can I make iPhoto Diet run properly again?
Would appreciate any help very very very much.
Thanks in advance,
Michelle.
Powerbook G4 12" Mac OS X (10.4.9)Michelle
It means that the application cannot find the Modified folder, which should be in your iPhoto Library Folder (inside your Pictures Folder).
Have you contacted the developers of iPhoto Diet?
http://www.rhythmiccanvas.com/software/iphotodiet/
Regards
TD -
In iTunes, I have a number of tones stored. I don't know how to access them to add to listed people on my iPhone. I would appreciate any help.
Drap and drop the tones from iTunes onto the phone. Select the contact you wish you add the tone to. Click edit and select ringtone.
-
Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer. I would gratefully appreciate any help in solving this?
I have the same problem; used Migration Assistant to transfer all my pix from PC to MacbookPro, however dates of pix were not transferred. Date created as the date of transfer. Cannot sort my pix according to date.
Anybody has an answer? -
I am having a problem with adding selected numbers in a column. When I select "sum" the whole column is added, not just the selected cells. I would appreciate any help how to rectify? Many thanks. Francis Anthony
I don't know if this is the best way but it's pretty easy.
1.) Select the cell you want the sum in.
2.) Select the sum function
3.) In the line where you see =sum(B2:B8) using your finger tap the B2:B8
4.) Use the backspace key to delete the B2:B8 and it will then show "value"
5.) You can now tap any cell you want in the sum
6.) When finished tap the green check mark button at the end of the sum line.
That pretty much sums it up.
Good luck.
Steve -
My MacBook uses Mac OS X Version 10.6.8. I am unable to access some websites, such as Facebook and Google, but I can access other sites such as MSN and Amazon. I have emptied the Safari cache with no change. Appreciate any help in solving this problem.
My MacBook uses Mac OS X Version 10.6.8. I am unable to access some websites, such as Facebook and Google, but I can access other sites such as MSN and Amazon. I have emptied the Safari cache with no change. Appreciate any help in solving this problem.
-
I have a huge mess I would appreciate any help possible with Itunes!
I've had Itunes forever now and it's been fine. With this last upgrade, it's created some problems. Half of my new playlists created have disappeared. The music is still there in the library, just the playlists are gone which was enough to fill a 60 gb ipod. Itunes now reads at the bottom I have 1022 GB of music - my hard drive is 250gb so that's obviously incorrect. My iphone will not recognize my calendar or my contacts in Office 2003 with all updates - so basically it's hosed. Someone had given me a link to uninstall it which I did. I restarted. Then I uninstalled apple mobile something or other and restarted. Then I deleted the itunes folder from program files emptied recycle bin and then restarted. I then proceeded to re-download and install itunes. I went through the hour process of uninstall and restart then install. I get everything finished and open itunes expecting to see a fresh clean slate and it's exactly the same. What did I do wrong since I followed these instructions at the bottom for uninstalling http://docs.info.apple.com/article.html?artnum=305845
I need help. I figure at this point I'll take my losses with my playlists I have spent years building just to have everything working again. I appreciate any help you can give.Assume you mean "invitations" and not "innovations"?
If you have pages 4, just do File > New From Template Chooser and select Invitations under the Page Layout category.
Maybe you are looking for
-
IPod Touch 4G upgrade to iOS 5 went badly, now won't sync.
iPod Touch 4G upgrade to iOS 5 went badly - backup corrupted. Reset iPod and installed as new device in iTunes 10.5 but would not sync. After many attempts and another reset, it has now synced apps, contacts, and movies but only immediately after a
-
I recently did the latest update, and then I charged my Ipad 2 afterwards. I went to use my Ipad 2 days later, and it would not even turn on. Then after a couple minutes, the apple logo appeared as if it were loading. It continued to do this for a fe
-
get this message when trying to authorize my computer. This apple id has not bee used with the itunes store. Do i have to purchase something, before i can authorize my computer.Thank you in advance for any answers received.
-
Mapping Roles/Groups between Oracle EBS R12 and OBIEE 11g
Hi, We are implementing OBIEE 11g with Oracle EBS R12 as source system. Also we are using Out of the box RPD for Oracle EBS R12. But we are facing lot of challenges to map OBIEE 11g groups and EBS roles and responsibilities. We do not have prior expe
-
How do i restore when in recovery mode and itunes does't recognise it
i tried to restore my ipod and accidently unplugged it, now itunes is telling me that itunes has detected an ipod in recovery mode. and that i must restore my ipod before using it in itunes. but i can't figure out how to restore it with out it showin