I 'd like to know regarding a method to separate a standby node from CE
Hi community
I have a question regarding a method to separate a standby node from CE.
I would like to know if it is possible to run the vary off command on standby node while active instance is working.
For example,
-shutdown standby instance on standby server.
-run vary off and exportvg command on standby node while active instance is working.
Version Info
-OS : AIX 6.1
-DBMS : Sybase CE 15.5 with 2Node
-Shared Volumn : DS8700 ( 4TB )
In this case, I would like to know if there is any side effect on Active instance.
Our CE version is ASE15.5 ESD5.3 on AIX.
Thanks in advance
Regards
Taiwoo Kim
To make sure I understand, you have a two node ASE cluster....one of which is active, the second is idle. You want to detach (for some reason) the disks from the second node of the cluster.
From the cluster viewpoint, provided you shutdown the ASE instance on that node and don't run any cluster utilities on that node (e.g. sybcluster, quorumutil, etc.) - then whether the disks are attached or not is likely not going to be an issue. It would be no difference to the surviving node than if you shutdown the other node completely (host included).
What concerns me is that you obviously are planning something that affects that volume group - e.g. moving it to a new machine??? Swapping HW??? Updating OS volume management firmware??? If swapping HW, remember, the quorum has the list of participants in the cluster - so unless the new hardware hostname/ipaddr matches the old, you will need to modify the quorum entries (TechSupport can help with this) - although the better approach would be to build a new node of the cluster on the new HW (temporarily a 3 node cluster) and then remove the old node from the cluster. If updating OS firmware, just be careful that the patch doesn't cause problems with IO fencing by changing the SCSI PGR versions or something.
Similar Messages
-
We have 4000 transports...would like to know the best methods of transports
We have 4000 transports...would like to know the best methods of transports.I understand mass transports and consolidation of transports through transport organiser can be of help ..However would like to understand more on the following points
1)In both the cases, how dependencies between transports will be managed.
2)How Sequencing will be managed?
3)Which is recommended and under what circumstances?
4)Pros and cons of each?
Thanks
ShamnaHave those transports already be transported (e.g. from Dev to Test?) - if so the transports from Test to Prod must be in the exact same sequence you transported them into Test because only then the coding status will be exactly the same.
If there was no transport yet then you usually transport in the sequence of the transport numbers - however if they have not yet been transported you don't know, if there are dependencies between different transports unless you kept a kind of log.
In that case the savest way to transport everything is to combine all objects of all transports into one transport and then let that one run into Test and Prod. That way you would not have to worry about sequence problems where a newer version is overwritten by an older version.
However the big transport only works if all the objects in those 4000 transports are not locked in any open request. You can create that transport by using SE03 and choosing 'Merge Object Lists' - just paste all the transports into the selection field and execute. You don't have to do all 4000 at once but do it in packages.
Hope that helps,
Michael -
Hello everyone. As a new Mac user, I would really like to know the easiest way to move my music files from my old PC to my MacBook? Do I move only the files, the entire iTunes and how? I have a lot of music so it is not a solution with iPod/iPhone.
Your best option is to post this in the iTunes forum.
Ciao. -
I would like to know the list of possible output (export) file codec from FCP X. For example, can I export in FLV format? Where do I find the list, which gives me all the details about it? Or is there only one output codec? Thanks
That's an excellent analogy. While FCP cannot export FLV. It is possible to do a very simple substitution. If you export a QuickTime movie using the .mov suffix with the H.264 codec, you can change it to FLV simply by changing the suffix to .flv. This is an acceptable format for Flash movies on most web sites, if that's where you're trying to go.
-
I have quite a few CDs that I have ripped to the hard drive of my xbox 360, and I would like to figure out how to load them on my ipad. Any help would be greatly appreciated. Thank you
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you let iTunes manage your music: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Start iTunes with the option (shift on Windows) key held down and guide it to the new location of the library. -
I have just starting having problems with my @mac.com account because I still have an old computer. Un fortunatelly so many years this is my main account and no option to send e-mail are possible.
Is this related with the transitional process from moving to an @icloud.com account?
regardspvonk wrote:
First of all, your profile says you are using OSX 10.5.8 which is incompatible wth all features of icloud, although users have been able to use icloud's email with older versions. With the transition to @icloud.com accounts, it's difficult to say what the effect is regarding older versions of OSX. I've read posts by others who are still using these versions and have now been having problems with emails.
iCloud mail is a standard Imap account, any version of OSX (or Windows) with an Imap compatible mail client can use it. -
Anyone can help me?
Regards,
CrisNo idea what you are talking about
however as a rule of thumb if it isn't on the Apple .com online store Apple do not sell it -
I am the System Administrator of my computer. I have managed to limit most of what my nephew can do via general Windows functions. However, I need to prevent him from changing his Firefox Options (listed under the Tools menu). He has already changed items that leave my computer vulnerable and although I've explained to him that he should not change anything in the Options area, he continues to do it. If there is not a way for me to prevent him from changing anything in Options, then I have no alternative than to prevent him from using the computer at all. I hope it doesn't come to that.
''"...although I've explained to him that he should not change anything in the Options area, he continues to do it. If there is not a way for me to prevent him from changing anything in Options, then I have no alternative than to prevent him from using the computer at all."''
Maybe taking away his privileges will could teach him a valuable lesson------respect other people's property! -
This is a problem I've been chasing, looking for a solution, since I registered my computer in January 2013. In spite of registering under about 5-6 different user IDs and passwords, I'm never able to get logged-in. I have disabled all security and autofill options, deleted all cookies, lowered my security settings to minimum, and changed internet settings. I've even used the Forgot Password link and answered all questions but I'm always sent back to the log-in page and it either recycles back to the log-in page or tells me the user id or password is incorrect. Over a month ago, CalvinP said the issue had been escalated. To where? I've not had any attempts to contact me or anything. I'm really sorry I decided to stay in the HP family. Got to be the lousiest support going. Why doesn't Ms Whitman do something about the obvious indifference to the people that has made HP what it is? Does anyone, not associated with HP, have any ideas? Believe me, I will not purchase another HP product.
This question was solved.
View Solution.His posts lately are originating from Facebook...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
Method to remove a given node from the list?
Anybody know how to do it?
import java.util.Iterator;
import java.util.HashSet;
import java.util.Set;
* A doubly linked list as introduced in lecture 6 in IN2002. Template for
* coursework 2a in 2006.
public class DLList implements Iterable {
* Inner class for doubly linked list nodes.
class DLNode {
Object info; // the data element
DLNode next; // the next node
DLNode prev; // the previous node
DLNode(Object argInfo) {
info = argInfo;
private DLNode head, tail;
private int count;
* Appends an object at the tail of this list.
* @param argOb The object to append.
public void appendAtTail(Object argOb) {
DLNode node = new DLNode(argOb); // new node
if (tail == null) { // empty list
tail = node; // set the tail
head = tail; // and head
} else { // non-empty list
tail.next = node; // connect the
node.prev = tail; // new node
tail = node; // set the tail
count++; // udpate count
* Deletes the given node maintaining the list structure.
* @param node The node to delete, must be in the list.
private void delete(DLNode node) {
..............................??? -
hello - I have done a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version - thank you
>I have managed to download the footage onto Picture Motion Browser
Isn't Picture Motion Browser available for Windows only? If so, why are you posting in an Final Cut Express forum? My apologies if I'm incorrect.
-DH -
HDD failure, I'd like to know how to get Windows 7 back on it.
Hello everyone, I've had a HDD issue lately, but before I move on to describe my issue, here are the specs of my notebook:
HP Pavilion dv6-3264ca
AMD Triple-Core CPU 2.2 Ghz
6GB RAM
128MB ATI Graphic Card
750GB Toshiba HDD
Windows 7 64-bit
The issue:
Recently I've had a very unfortunate HDD failure. The recovery partition wouldn't even load. I tried booting my notebook on Linux with the HDD still attached, and it wouldn't read. I extracted the HDD and placed it in an HDD-enclosuer and it still wouldn't load on Windows XP or Vista or 7. It would however read in the device manager of Windows and also in the BIOS.
I needed to extract some high-priority data from there so I managed to retrieve all my data safely through a data recovery service, but now the drive is rendered useless. I was told a low-level format might be able to help it be usable again, and if that were to happen, the recovery partition would then be removed in the process.
In addition to that, I would like to install Windows 7 64-bit onto the drive, but the notebook box did not come with an installation CD, which is quite frustrating. Is there any way HP can let me download Windows 7 through some warranty service?
I have a one-year warranty on my laptop.
So in closing, I would like to know if I can get Windows 7 back onto my HDD for free, or if I need to go about buying Windows 7 again.
Any advice from you kind folks?
This question was solved.
View Solution.Hi,
Here are Two options.
1. If you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD.
http://www.mydigitallife.info/download-windows-7-iso-official-32-bit-and-64-bit-direct-download-link...
Use the disc to perform the installation, enter the Windows activation key found on the underside of your notebook when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
2. You can order a replacement set of Recovery Discs using the link below - these cost around $30 if you live in the US.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I am receiving charges and would like to know if you can tell me what the AppleID is that is buying the songs
We're just fellow users here and have no access to any information about your account. Nor in most cases will Apple be able to give you such information. If your credit card is being charged for purchases that are not showing in your iTunes Store account's Purchase History, contact your bank and report the charges as fraudulent.
Regards. -
I work in schools and would like to know if a school opens an iTunes account to purchase apps, how many iPads can that app be loaded onto legally?
One iPad per purchase, assuming the iPads will be used by different users. If the school wants to purchase an app for multiple iPads, they have to have one license for each iPad. In the US, there's an academic volume purchase plan:
http://www.apple.com/itunes/education/
Regards. -
I recently experienced an issue on my ipad2 related to location services. While connected to a wifi network, I found that apps requiring location services would not work properly and I would receive a pop up notice asking me to turn on location services. For example, the maps app would display a pop up stating "cannot determine location". My NHL gamecenter app would not allow me to watch live feeds; a pop up advised me to turn on location services. In each case, location services was in fact on.
I checked my settings, shut down the apps, restarted them, shut down the iPad and rebooted it to no avail. The internet connection was working fine as best as I could determine. The wifi network was at a guest home and the router was recently replaced. I returned to my home wifi and everything worked fine. The next day, I returned to the guest Internet connection and everything seemed to work once again. However, while watching a NHL game, during the last seconds of an overtime shoot out, I lost video and it was attributed once again to location services being disabled. Of course I checked and nothing in my settings had been altered. I went to my iPhone (3GS) and pulled up the gamecenter app and was able to watch the end of the game( via wifi connection...same network).
So, I am puzzled as to what could be causing this problem. If anyone else is having similar issues, I would like to know as well as if there are any solutions or feedback from Apple regarding this type of problem.....Dave.As the King says, if your friends wifi router was relatively new, it likely has not been picked up by Apple's location based information database system and thus there is no location information associated with it. So your iPad had no way of getting its location.
The wifi location databases are traditionally updated by wardriving - literally companies employ people to drive around sniffing out active wifi signals and associating an approximate location to it. Some companies also have web sites to submit that information if owners wish to (Apple does not seem to have one though), and the various companies with wifi location databases buy and sell their information. Bottom line is though, it can take weeks, months or sometimes even longer for a residential router to get picked up - depends on where you live (more rural, likely the longer time it takes).
When I moved from VA to NC it took up to 6 months for mine to reflect my new location (I checked it once the week I moved in, and then periodically thereafter, and it finally was getting it right after about 6 months) and I live in a pretty densley populated area (triangle NC).
Maybe you are looking for
-
How do I get my music from Media Center to my iphone 4s. Itunes 10.5 won't import the MC music library, and MC won't recognize and synch to the iphone plugged into the USB port so I can't load playlists from MC to my iphone. Itunes help doesn't work.
-
Address Book: Can't edit contact or add new
I have two computers and an iPhone that should be synching Address Book and iCal amongst themselves on Mobile Me. Recently, the iBook G4's Address Book has had some features disabled: the "edit" button is grayed out, the "+" button is grayed out, and
-
Forward key on 17 inch PB not working. Please advise.
I've looked everywhere but can't seem to find a fix for this: The forward (end) key will no longer advance the cursor letter by letter. However, using option plus the forward key will advance the cursor to the end of the word. This means that the key
-
EDPAR and idoc segment E1EDKA1
Hi I have read all threads related to EDPAR but didn't get any satisfactory answer. I have maintained entries in EDPAR table thru t-code VOE4. I understand that I need to pass 'customer' and 'external partner' number in idoc to automatically de
-
How do i open a File save dialog box in forms? Is it possible in reports?