I'd like to make sur the update from iOS 5 to iOS 7 is done OTA and that you don't need to plug in to iTunes to upgrade when your device is in iOS 5. thx

Can you tell me if the upgrade from iOS 5 to iOS 7 is made OTA and that you don't need to plug in to iTunes using your PC. thx

If running iOS 5 or later, update can be OTA or via iTunes.
Be sure to have a good backup. OTA requires at least 3 GB
free on your iPhone, less if done via iTunes. Make sure your
iPhone is fully charged and you have a good wifi connection
before attempting OTA update.

Similar Messages

My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

Most of your purchases content can be downloaded again via the Purchased tabs in each of the store. I realize that this will be a problem for the iTunes Store on the iPad, but that has nothing to do with apps, since apps are in the App Store.
If you backed up synced with iTunes before you restored the iPad, your content should be in iTunes on your Mac and you should be able to sync it back again.

How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English

How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English
== This happened ==
Every time Firefox opened
== From the beginning

Some add-ons:
Default FullZoom: https://addons.mozilla.org/en-US/firefox/addon/6965 (I use this one)
No Squint: http://urandom.ca/nosquint/
Also:
http://support.mozilla.com/en-US/kb/Page+Zoom
http://support.mozilla.com/en-US/kb/Text+Zoom
http://kb.mozillazine.org/Browser.zoom.siteSpecific

I have multiple devices, an iPhone and an iPad, and would like to have the same Game Center setting on each device. I have game I have invested a lot of time into, and if I have to replace my iPad Id like to make sure the settings transfer.

To piggy back on my question, I would also like my Game Center settings to be the same on my iPad and iPhone so I can access the same game. Right now they are different, although the sign on and password to both are identical. Thanks in advance....

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

TS1389 What do you do if you keep getting the error message that the i Tunes library file cannot be saved, and that you don't have permission, etc...?

I noticed this message quite a few times over the last few months. Now the album that I just purchased won't save in i Tunes. I am really looking for a way to fix this so I can enjoy my music, especially since I have already been charged for it. I e-mailed apple tech support about the fact that the album has disappeared, but although I have waited the forecasted 48 hours, I have yet to receive an answer. It's rather frustrating.

I didn't know that iTunes had a 64bit download. I have Windows 7 Home Premium with 64bit operation system. I downloaded the iTunes for 64bit and it seems to have corrected the problem. I haven't received the message yet since I did this.

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this applicati

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?

Would you please provide details about your setup?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

HT2513 I have just upgraded to the icloud and now I am getting an error message on ical - saying "make sure the URL is correct", I haven't changed anything so why is it now an issue? any ideas?

I have just upgraded to the icloud and now I am getting an error message on ical - saying "make sure the URL is correct", I haven't changed anything so why is it now an issue? any ideas?
The full message sasy "The calendar https:// cal.me.com:8443/principas/users/(server number) was not found on the server. Make sure the URL is correct.

10.6.8 cannot access iCloud's facilities - you can set Mail up manually and there is a hack which some people have used to sync calendars (see below) - you cannot sync any other type of data.
This is the situation with iCloud and Snow Leopard:
Your email, calendars, and 'Find my iPhone' will be migrated to iCloud. Contacts and Bookmarks cannot be migrated from a Snow Leopard Mac.
Your iDisk, together with website hosting and Gallery, will continue to work as before until next June.
Syncing of Dashboard Widgets, Dock Items and Keychains between Macs, and Mail Accounts, Mail Rules, System Preferences, Signatures & Smart Mailboxes between Macs & iOS devices, will cease altogether.
You will be able to access email and calendars on the iCloud website at http://icloud.com provided your browser is reasonably up-to-date.
You will not be able to sync contacts or bookmarks from a pre-Lion Mac.
You will be able to enter the server settings for email manually in the Mail application and access your email.
You will not be able to sync your calendars directly.
Some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. BusyCal is an iCal-like calendar application with extra facilities: it can sync with the iCloud Calendar while running on Leopard, Snow Leopard or Lion.
There appears to be no method of syncing contacts (though Address Book on a Mac can be synced with Google or Yahoo address books - I don't know how reliable this is).

Unable to retrieve clouds on VMM server. Please make sure the server name is correct and try connecting again

I getting this annoying error "Unable to retrieve clouds on VMM server. Please make sure the server name is correct and try connecting again." I've followed the recommended documentation for setting up SPF and Azure using the following:
http://www.hyper-v.nu/archives/mvaneijk/2013/01/installing-and-configuring-system-center-service-provider-foundation/
I've gone thru the troubleshoot steps from the following:
http://blogs.technet.com/b/scvmm/archive/2014/03/04/kb-the-windows-azure-pack-service-management-portal-does-not-retrieve-cloud-settings.aspx
http://social.technet.microsoft.com/forums/windowsazure/en-US/363e7dae-7370-4605-bc8d-b98fa6dc9d8e/unable-to-register-vmm-server
So you don't need to send me those links.
I found a few others which pointed me to the event logs WindowsAzurePack\MGmtSVC-AdminAPi and AdminSite. In these event logs, I see a lot of event ID 12 and 1046. The contents of event id 12 is the following:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite
Date: 6/19/2014 3:27:55 PM
Event ID: 12
Task Category: (65522)
Level: Error
Keywords: None
User: IIS APPPOOL\MgmtSvc-AdminSite
Computer: usw-azure-01.uswired.com
Description:
Error:ManagementClientException: Resource not found.
<Exception>
<Type>ManagementClientException</Type>
<Message>Resource not found.</Message>
<StackTrace><![CDATA[
at Microsoft.WindowsAzure.Server.Management.ManagementClientBase.<ThrowIfResponseNotSuccessful>d__2b.MoveNext()
at Microsoft.WindowsAzure.Management.TaskSequencer.<>c__DisplayClass1e`1.<RunSequenceAsync>b__1d(Task previousTask)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetResourceProviderAsync>d__2e7.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetAutomationResourceProvider>d__2b6.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)]]></StackTrace>
<HttpContext>
<User IsAuthenticated="true" Name="USWIRED\Administrator" />
<Request>
<RawUrl>/SystemCenterAdmin/GetAutomationResourceProvider</RawUrl>
<UserHostAddress>fe80::c179:19c8:c5f2:7309%12</UserHostAddress>
<Headers>
<Header Key="Cache-Control" Value="no-cache" />
<Header Key="Connection" Value="Keep-Alive" />
<Header Key="Content-Length" Value="2" />
<Header Key="Content-Type" Value="application/json" />
<Header Key="Accept" Value="application/json, text/javascript, */*; q=0.01" />
<Header Key="Accept-Encoding" Value="gzip, deflate" />
<Header Key="Accept-Language" Value="en-US" />
<Header Key="Host" Value="usw-azure-01.uswired.com:30091" />
<Header Key="Referer" Value="https://usw-azure-01.uswired.com:30091/" />
<Header Key="User-Agent" Value="Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko" />
<Header Key="x-ms-client-session-id" Value="c343c29d-20b1-412b-be94-879409205700" />
<Header Key="x-ms-client-antiforgery-id" Value="0crwi2qNk20bMr6C04/vKd4L28WG1nd8JKBdOlCCp+xlph40YeL2oTdmeiTkPmE272S2dqmGQMNo+FElKkG2MdR0Xhq41RU/t8PrFjcG0Vgx4a8dgZLbfKVURo9n84F1XWtJOkTTUK/OeNVWBrK1+w=="
/>
<Header Key="x-ms-client-request-id" Value="dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z" />
<Header Key="X-Requested-With" Value="XMLHttpRequest" />
<Header Key="DNT" Value="1" />
<Cookies>
<Cookie Name="AdminSiteFedAuth" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (2000 characters)" />
<Cookie Name="AdminSiteFedAuth1" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (424 characters)" />
<Cookie Name="__RequestVerificationToken_Admin" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (128 characters)" />
</Cookies>
</Headers>
</Request>
</HttpContext>
</Exception>, operationName:SystemCenterAdmin.GetAutomationResourceProvider, version:, accept language:en-US, subscription Id:, client request Id:dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z, principal Id:USWIRED\Administrator, page request
Id:c343c29d-20b1-412b-be94-879409205700, server request id:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-AdminSite" Guid="{5E78D550-1384-5A96-C12A-CB6DA7BC6365}" />
<EventID>12</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65522</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-06-19T22:27:55.971935000Z" />
<EventRecordID>399</EventRecordID>
<Correlation ActivityID="{FAA512AF-E0A9-4F2A-80EF-09F72D2F7918}" />
<Execution ProcessID="3424" ThreadID="2308" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational</Channel>
<Computer>usw-azure-01.uswired.com</Computer>
<Security UserID="S-1-5-82-4118156790-2181488624-806685255-2797011695-3958995103" />
</System>
<EventData>
<Data Name="message">ManagementClientException: Resource not found.
<Exception>
<Type>ManagementClientException</Type>
<Message>Resource not found.</Message>
<StackTrace><![CDATA[
at Microsoft.WindowsAzure.Server.Management.ManagementClientBase.<ThrowIfResponseNotSuccessful>d__2b.MoveNext()
at Microsoft.WindowsAzure.Management.TaskSequencer.<>c__DisplayClass1e`1.<RunSequenceAsync>b__1d(Task previousTask)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetResourceProviderAsync>d__2e7.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetAutomationResourceProvider>d__2b6.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)]]></StackTrace>
<HttpContext>
<User IsAuthenticated="true" Name="USWIRED\Administrator" />
<Request>
<RawUrl>/SystemCenterAdmin/GetAutomationResourceProvider</RawUrl>
<UserHostAddress>fe80::c179:19c8:c5f2:7309%12</UserHostAddress>
<Headers>
<Header Key="Cache-Control" Value="no-cache" />
<Header Key="Connection" Value="Keep-Alive" />
<Header Key="Content-Length" Value="2" />
<Header Key="Content-Type" Value="application/json" />
<Header Key="Accept" Value="application/json, text/javascript, */*; q=0.01" />
<Header Key="Accept-Encoding" Value="gzip, deflate" />
<Header Key="Accept-Language" Value="en-US" />
<Header Key="Host" Value="usw-azure-01.uswired.com:30091" />
<Header Key="Referer" Value="https://usw-azure-01.uswired.com:30091/" />
<Header Key="User-Agent" Value="Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko" />
<Header Key="x-ms-client-session-id" Value="c343c29d-20b1-412b-be94-879409205700" />
<Header Key="x-ms-client-antiforgery-id" Value="0crwi2qNk20bMr6C04/vKd4L28WG1nd8JKBdOlCCp+xlph40YeL2oTdmeiTkPmE272S2dqmGQMNo+FElKkG2MdR0Xhq41RU/t8PrFjcG0Vgx4a8dgZLbfKVURo9n84F1XWtJOkTTUK/OeNVWBrK1+w=="
/>
<Header Key="x-ms-client-request-id" Value="dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z" />
<Header Key="X-Requested-With" Value="XMLHttpRequest" />
<Header Key="DNT" Value="1" />
<Cookies>
<Cookie Name="AdminSiteFedAuth" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (2000 characters)" />
<Cookie Name="AdminSiteFedAuth1" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (424 characters)" />
<Cookie Name="__RequestVerificationToken_Admin" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (128 characters)" />
</Cookies>
</Headers>
</Request>
</HttpContext>
</Exception></Data>
<Data Name="requestId">
</Data>
<Data Name="subscriptionId">
</Data>
<Data Name="clientRequestId">dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z</Data>
<Data Name="principalId">USWIRED\Administrator</Data>
<Data Name="version">
</Data>
<Data Name="pageRequestId">c343c29d-20b1-412b-be94-879409205700</Data>
<Data Name="acceptLanguage">en-US</Data>
<Data Name="operationName">SystemCenterAdmin.GetAutomationResourceProvider</Data>
</EventData>
</Event>
Event ID 1046 is
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite
Date: 6/19/2014 3:32:56 PM
Event ID: 1046
Task Category: (116)
Level: Error
Keywords: None
User: IIS APPPOOL\MgmtSvc-AdminSite
Computer: usw-azure-01.uswired.com
Description:
Could not connect to Resource Provider. Error: Resource not found.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-AdminSite" Guid="{5E78D550-1384-5A96-C12A-CB6DA7BC6365}" />
<EventID>1046</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>116</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-06-19T22:32:56.854137500Z" />
<EventRecordID>413</EventRecordID>
<Correlation ActivityID="{C20DBEAD-388F-4CF4-80FD-21C6419CC2F1}" />
<Execution ProcessID="3424" ThreadID="2768" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational</Channel>
<Computer>usw-azure-01.uswired.com</Computer>
<Security UserID="S-1-5-82-4118156790-2181488624-806685255-2797011695-3958995103" />
</System>
<EventData>
<Data Name="errorMessage">Resource not found.</Data>
</EventData>
</Event>
The other thing I notice is that when trying to connect to the VMM. It's trying to use domain\username, yet when I try logging in with domain\username via the SCVMM Console. I get the You cannot access VMM management server (Error ID: 1604).
I'm not sure if this is why I can not add the VMM to WAP. Any help would be appreciated. Thanks
Nick

Hello,
I am not sure about the answer but I guess these steps will solve your problem:
1) Log in to the SPF server by using an account that is a member of the SPF_Admin local group.
2) Open an elevated Windows PowerShell window.
3) Type the following commands, and press Enter after you type each command:
Import-module spfadmin
New-SCSPFTenant -Name Administrator -SubscriptionId 00000000-0000-0000-0000-000000000000
4) Close the WAP Server Management Portal, and then reconnect to it to update all items.

[svn:fx-trunk] 12936: -make sure the bundles directory for airspark is not included in the package fixes bug SDK-24552

Revision: 12936
Revision: 12936
Author:   [email protected]
Date:     2009-12-14 19:40:23 -0800 (Mon, 14 Dec 2009)
Log Message:
-make sure the bundles directory for airspark is not included in the package fixes bug SDK-24552
-remove (from svn) the en_US/docs directories for textLayout because these directories and dita files are created by asdoc in the doc target
-updated the main build.xml to not include the playerglobal project
-updated fat-swc targets in osmf,automation_spark,automation_flashflexkit,automation,airspark, and textlayout to remove the doc directory.
QE notes: make sure copylocales works properly
Doc notes: no
Bugs: SDK-24552
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24552
    http://bugs.adobe.com/jira/browse/SDK-24552
Modified Paths:
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/frameworks/projects/airspark/build.xml
    flex/sdk/trunk/frameworks/projects/automation/build.xml
    flex/sdk/trunk/frameworks/projects/automation_flashflexkit/build.xml
    flex/sdk/trunk/frameworks/projects/automation_spark/build.xml
    flex/sdk/trunk/frameworks/projects/osmf/build.xml
    flex/sdk/trunk/frameworks/projects/textLayout/build.xml
Removed Paths:
    flex/sdk/trunk/frameworks/projects/airframework/bundles/en_US/docs/
    flex/sdk/trunk/frameworks/projects/automation/bundles/en_US/docs/
    flex/sdk/trunk/frameworks/projects/automation_flashflexkit/bundles/en_US/docs/
    flex/sdk/trunk/frameworks/projects/automation_spark/bundles/en_US/docs/
    flex/sdk/trunk/frameworks/projects/framework/bundles/en_US/docs/
    flex/sdk/trunk/frameworks/projects/rpc/bundles/en_US/docs/
    flex/sdk/trunk/frameworks/projects/textLayout/bundles/en_US/docs/

Well, I've tried compiling a package and I have modified the PKGBUILD file to look like this now. (Keeping it as simple as possible)
pkgname=dvbcut-svn
pkgver=16
pkgrel=1
pkgdesc="DVBCUT-svn is an application that allows you to
edit MPEG files. ie: Remove TV ads. (SVN version: Fri, 01 Dec 2006)."
url="http://dvbcut.sourceforge.net"
depends=('qt' 'libao')
makedepends=('subversion' 'scons')
conflicts=('dvbcut' 'ffmpeg')
provides=('dvbcut')
source=()
md5sums=()
_svntrunk=https://svn.sourceforge.net/svnroot/dvbcut/trunk
_svnmod=dvbcut
build() {
cd $startdir/src
svn co $_svntrunk --config-dir ./ -r $pkgver $_svnmod
cd $_svnmod
msg "SVN checkout done or server timeout"
msg "Starting make..."
make || return 1
# vim:syntax=sh
I then run makepkg PKGBUILD and let it do its thing
It ends with this...
scons: done building targets.
==> Removing info/doc files...
==> Compressing man pages...
==> Stripping debugging symbols from libraries...
==> Stripping symbols from binaries...
==> Generating .PKGINFO file...
==> Generating .FILELIST file...
tar: *: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
==> Compressing package...
tar: *: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
==> Finished making: dvbcut-svn (Sun Jan 21 19:08:28 UTC 2007)
I'm not sure what's causing this error message.
tar: *: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
I'll try installing it and see how it goes.

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

Application cannot proceed. Internal error occured. Contact your administrator. Error msg: Unable to connect to the database. Please make sure the database information specified in admin/includes/config.php are correct.

After clicking in email link, I get the following message on Firefox page : " The application cannot proceed!
An internal error occured. Please contact your administrator and describe the steps you took before you encounter this error message.Error msg: Unable to connect to the database. Please make sure the database information specified in admin/includes/config.php are correct."
The email asked to install the latest Adobe Flashplayer version to have it working. I installed it, also updated my plug-ins and checked in safe mode that the extensions were not the problem. I also deleted the cookies an cache. Nothing seems to be working so far. I have the lastest version of Firefox 8.0.1 as well as Roboform 7. I noticed that the latest Firefox version has (x86) tagged to it. Does it refers to an 86 bits because my computer uses 32 or 64 bits only. I tried also different browsers and the message kept appearing. How do I resolve this problem?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

TF400525: Make sure the SQL Server Reporting Services service for this instance is running.

I am trying to install TFS 2012 update 4 on single server installation.
I am getting below error:
TF400525: Make sure the SQL Server Reporting Services service for this instance is running.

Hi CFSA,
Thanks for your post.
If you want install TFS 2012 Server with Reporting Server, you must ensure the provided Reporting Services is running first.
As Daniel said, please check that in SQL Server Configuration Manager to ensure Reporting Services is installed and running.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I make sure the content fits the browser?

I'm having a little trouble making content on a website fit in different browsers. It seems to be making extra space on the right side in safari and a LOT of extra space on the right side in firefox. How do I make sure the content will fit and be centered?
Thanks in advance!

That question is a little like asking "how do I build an airplane?" It's just too vague and open ended for us to give you a meaningful answer.
Answers to layout questions are contained in your HTML and CSS code. For quickest help, please post a link to your online page.
Nancy O.

[svn:fx-trunk] 8190: make sure the HaloClassic theme is not copied into the package b/ c it is no longer supported in flex 4

Revision: 8190
Author:   [email protected]
Date:     2009-06-24 12:26:02 -0700 (Wed, 24 Jun 2009)
Log Message:
make sure the HaloClassic theme is not copied into the package b/c it is no longer supported in flex 4
bug: https://bugs.adobe.com/jira/browse/SDK-20729
qa: no
doc:
checkintests: pass
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-20729
Modified Paths:
    flex/sdk/trunk/build.xml

Gordon, it looks like its been a while since you made this post. Not sure how valid it is now...   I am particularly interested in the LigatureLevel.NONE value. It seems that it is no longer supported.
How do I turn of ligatures in the font rendering?
My flex project involves trying to match the font rendering of Apache's Batik rendering of SVG and ligatures have been turned off in that codebase. Is there any way (even roundabout) to turn ligatures off in flash?
Thanks,
Om

Make synchronous the update process of the FB01 transaction.

Hello, we are using the BTE 1080 that is inside of the FB01 transaction
to execute a "call transaction" to the F-51. At this point we use the
FI accounting document data (identified by: {BUKRS, BELNR, GJAHR})
"created" by FB01 as an input to the F-51 "call transaction".
Due to the update process in the FB01 is asynchronous (in update task)
some times the update process delays longer than usual and the F-51 fails
because is unable to find the FI accounting document data in the database.
We could use the "wait" instruction to wait for a period of time until the
"update task" write data to the database, but we don't know how much
time it will take. We would like to know if it is possible to make synchronous
the update process of the FB01 in order to warranty the existency of the
data in the database that will be used by the next transaction F-51.
Thank you and best regards,
José.
Edited by: Ivan Gonzalez on Sep 15, 2010 2:48 AM

Hi,
I don't think it's possible. You can do a simple select from BKPF and if the new document is already there then don't wait. Otherwise wait for reasonable time and check again.
Cheers

I'd like to make sur the update from iOS 5 to iOS 7 is done OTA and that you don't need to plug in to iTunes to upgrade when your device is in iOS 5. thx

Similar Messages

Maybe you are looking for