I'd like to report a possible violation of the ToU
Dear hosts,
this "discussion"
http://discussions.apple.com/thread.jspa?threadID=2715872&tstart=0
is, in my opinion, an extreme example of how users misuse the forum to garner points and advance their status.
The question(s) by user captfred are so obviously, deliberately "created" in order to award points to another (?) user, it makes me sick.
Another user seems to have similar sentiments
Dumpfbacke wrote:
Congrats, Roger !
Took the last hurdle in stride, haven't we ? Well with a little help from ones friends ...
Hey, who would expect that captfred, a long time contributor to Apple Discussions and a Level 3 user, would know how resetting the SMC and PRAM on the MBA works, let alone searching for the information in the Apple support knowledge base. How convenient
BRILLIANT !! Us lowly L2's can learn a lot from you two how to "game the system".
Have a nice day !
Thank you.
Dr. Mabuse,
Thank you for bringing this to our attention, we have looked into the matter.
The user you are referring to has reached level 3 so it is doubtful that the user was created specifically to award points. It does appear that they created the topic specifically to get someone else the last points they needed to reach level 4.
If there was a history of the users gaming the system it would be a problem, however on investigation it appears harmless enough. One user wanted to get another user they respected to Level 4, something that would have happened regardless. We see it more as someone recognizing the efforts of another user and thanking them by giving them those last few points.
It's not something we encourage, and if there is a pattern we would need to take action however in this case it seems harmless enough.
-Eric
Similar Messages
-
In ALV report is possible to display the subtotals in separate column
Hi,
I have made one ALV report, i need to show the subtotals of ekpo-brtwr (Gross Value) grouped by or sorted by
ekko-ebeln (Purshasing Doc) but in separate column not at the end of the line items of each purshasing doc
any idea how can i do this?
let us say i have the following cols in my report:
ekko-bukrs
ekko-ebeln,
ekko-aedat,
kko-lifnr,
ekpo-brtwr
i want to add one more col for example (T-Gross) and to fill it with the suptotals of (ekpo-brtwr) sorted by the
ekko-ebeln (Purshasing Doc).
thanks a lot.If you need one more column, then you need to expand the field catalog table and data table as you did for all other fields and you need to code the logic to calculate the subtotals and populate the new column, but if you want to have row, that will be easy. For more info you can [refer |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4063c42a-2549-2c10-fab6-a8c99d98b9b5?quicklink=index&overridelayout=true]this:
-
How do I make Internet commerce with the MacBook Pro in the program iWeb. I've made the website and would like to ad a site where it possible to commerce with debit cards. Is there anyone who can help?
Some info on this and the following two pages...
http://www.iwebformusicians.com/Internet-Music-Sell-Distribute/Website-Buy-Page. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
JRC Export to Text like Crystal Report Designer Export
We need to Export report to Text like Crystal Report Designer Export using JRC. Is this possible? I see export ReportExportFormat CSV, PDF and RTF only. These exports are working, But I need plain text that looks like Text export of Crystal Reports Designer. I see this working in RAS 2008. What I can do to get this with JRC. I am using Crystal Reports 2008 to design reports.
Thanks for any help.
Regards
Raveendra
ClarificationThank you Jitin.
What could be solution to this problem?
If still I want to go with JRC, Can I write some Java code to perform this export?
I see TextExportFormatOptions and its not working.
If I want to export automatically to text format, what other choices are there?
Basically I need to execute report and generate text file automatically. Text file should look like Crystal Report Designer Exported Text file.
Thank you for your time.
Regards,
Raveendra -
Is it possible to change the position of beining of text in a standard report
Hi,
I am wondering wether it is possible to change the position of the test (the starting point) in a standard report. I would like to print a label with different texts at different positions. If its not possible in a standard report is there any other way to do it.
Thank you,
Mudda.Hi Mudda, I don't see any way myself to set any particular starting position for your text. It looks like the best way to emulate this behavior would be to add a new line with lots of tab characters or spaces to place your new text at a specific offset from the left. You can also use Append Table to Report and wire in a 2D string array with only a few positions filled in with your various text labels as shown below. This will space text labels pretty well across the page. Try it out and see if it works for you. You could be more clever and build the 2D array programmatically if you wanted more control over position.
Message Edited by Jarrod S. on 06-02-2006 05:37 PM
Jarrod S.
National Instruments
Attachments:
Set_Report_Position.JPG 69 KB -
How to design Customized ALV report like normal report !
Hello Friends,
I like to design a ALV report, with sub headers, sub totals, summary total and other summary details like percentage sale, which is not relavent to the fields displayed in the ALV.
I know it is possible to get total of the displayed field, but is it possible to design flexible ALV report like normal report.
Could U please provide example code, if available.
Thank you,
SenthilHI,
Just check this example.
REPORT ZLAXMI_ALVEXER2 MESSAGE-ID ZZ .
*& TABLES DECLARATION *
TABLES: VBAK.
*& TYPE POOLS DECLARATION *
TYPE-POOLS: SLIS.
*& INTERNAL TABLE DECLARATION *
DATA: BEGIN OF ITAB OCCURS 0,
ICON TYPE ICON-ID,
VBELN LIKE VBAK-VBELN,
AUDAT LIKE VBAK-AUDAT,
VBTYP LIKE VBAK-VBTYP,
AUART LIKE VBAK-AUART,
AUGRU LIKE VBAK-AUGRU,
NETWR LIKE VBAK-NETWR,
WAERK LIKE VBAK-WAERK,
END OF ITAB.
*INTERNAL TABLE FOR FIELD CATALOG
DATA: WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV
WITH HEADER LINE,
*INTERNAL TABLE FOR EVENTS
DATA: IT_EVENT TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT,
*INTERNAL TABLE FOR SORTING
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT TYPE SLIS_SORTINFO_ALV,
*INTERNAL TABLE FOR LAYOUT
WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
*& VARIABLE DECLARATION *
DATA : V_REPID TYPE SY-REPID,
V_PAGNO(4) TYPE N,
V_DATE(8) TYPE C.
*& CONSTANTS *
CONSTANTS: C_X TYPE C VALUE 'X'.
*& SELECTION SCREEN *
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN,
S_VBTYP FOR VBAK-VBTYP DEFAULT 'C'.
SELECTION-SCREEN: END OF BLOCK B1.
SELECTION-SCREEN: BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) TEXT-003.
PARAMETERS: P_LIST RADIOBUTTON GROUP RAD1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) TEXT-004.
PARAMETERS: P_GRID RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN: END OF BLOCK B2.
AT SELECTION-SCREEN.
PERFORM VALIDATE_SCREEN.
*& START OF SELECTION *
START-OF-SELECTION.
CLEAR: ITAB, ITAB[].
V_REPID = SY-REPID.
PERFORM GET_DATA.
PERFORM DISPLAY_DATA.
*& END OF SELECTION *
END-OF-SELECTION.
*--DO ALV Process
V_REPID = SY-REPID.
*--Sort the Output Fields
PERFORM SORT_FIELDS.
*--Build Field catalog for the Output fields
PERFORM BUILD_FIELDCAT.
*--Set the Layout for ALV
PERFORM SET_LAYOUT.
*& Form GET_DATA
text
TO GET THE DATA FROM TABLES INTO ITAB
FORM GET_DATA .
SELECT VBELN
AUDAT
VBTYP
AUART
AUGRU
NETWR
WAERK
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM VBAK
WHERE VBELN IN S_VBELN AND
AUDAT > '04.04.2005'
AND NETWR > 0.
LOOP AT ITAB.
IF ITAB-NETWR < 10000.
ITAB-ICON = '@08@'.
ELSEIF ITAB-NETWR > 10000 AND ITAB-NETWR < 100000.
ITAB-ICON = '@09@'.
ELSEIF ITAB-NETWR > 100000.
ITAB-ICON = '@0A@'.
ENDIF.
MODIFY ITAB INDEX SY-TABIX.
ENDLOOP.
ENDFORM. " GET_DATA
*& Form sort_fields
FORM SORT_FIELDS .
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'VBTYP'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'NETWR'.
WA_SORT-SPOS = '2'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
ENDFORM. " sort_fields
*& Form build_fieldcat
*FORM BUILD_FIELDCAT .
IT_FIELDCAT-COL_POS = '1'.
IT_FIELDCAT-FIELDNAME = 'ICON'.
IT_FIELDCAT-KEY = 'X'.
IT_FIELDCAT-OUTPUTLEN = '10'.
IT_FIELDCAT-SELTEXT_L = 'LIGHT'.
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS = '2'.
IT_FIELDCAT-FIELDNAME = 'VBELN'.
IT_FIELDCAT-KEY = 'X'.
IT_FIELDCAT-OUTPUTLEN = '10'.
IT_FIELDCAT-SELTEXT_L = 'SALES DOC NUMBER'(009).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS = '3'.
IT_FIELDCAT-FIELDNAME = 'AUDAT'.
IT_FIELDCAT-KEY = 'X'.
IT_FIELDCAT-OUTPUTLEN = '4'.
IT_FIELDCAT-SELTEXT_L = 'DOCUMENT DATE'(010).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS = '4'.
IT_FIELDCAT-FIELDNAME = 'VBTYP'.
IT_FIELDCAT-KEY = 'X'.
IT_FIELDCAT-OUTPUTLEN = '4'.
IT_FIELDCAT-SELTEXT_L = 'CATEGORY'(011).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS = '5'.
IT_FIELDCAT-FIELDNAME = 'AUART'.
IT_FIELDCAT-OUTPUTLEN = '4'.
IT_FIELDCAT-SELTEXT_L = 'DOCUMENT TYPE'(012).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS = '6'.
IT_FIELDCAT-FIELDNAME = 'AUGRU'.
IT_FIELDCAT-OUTPUTLEN = '12'.
IT_FIELDCAT-SELTEXT_L = 'Order reason'(013).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS = '7'.
IT_FIELDCAT-FIELDNAME = 'NETWR'.
IT_FIELDCAT-OUTPUTLEN = '12'.
IT_FIELDCAT-SELTEXT_L = 'NET VALUE'(014).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS = '8'.
IT_FIELDCAT-FIELDNAME = 'WAERK'.
IT_FIELDCAT-OUTPUTLEN = '12'.
IT_FIELDCAT-SELTEXT_L = 'SD DOC CURR'(015).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
*ENDFORM. " build_fieldcat
*& Form set_layout
FORM SET_LAYOUT .
IF P_LIST = C_X .
WA_LAYOUT-WINDOW_TITLEBAR = 'LIST DISPLAY'(016).
WA_LAYOUT-ZEBRA = 'X'.
*-- ALV LIST DISPLAY
PERFORM LIST_DISPLAY TABLES ITAB.
*-- ALV GRID DISPLAY
ELSEIF P_GRID = C_X.
WA_LAYOUT-WINDOW_TITLEBAR = 'GRID DISPLAY'(017).
WA_LAYOUT-ZEBRA = 'X'.
PERFORM GRID_DISPLAY TABLES ITAB.
ENDIF.
ENDFORM. " set_layout
*& Form list_display
FORM LIST_DISPLAY TABLES P_ITAB .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT[]
IT_SORT = IT_SORT[]
I_SAVE = 'U'
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " list_display
*& Form GRID_DISPLAY
FORM GRID_DISPLAY TABLES P_ITAB .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = IT_FIELDCAT[]
IT_SORT = IT_SORT[]
IT_EVENTS = IT_EVENT
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GRID_DISPLAY
*& Form VALIDATE_SCREEN
text
--> p1 text
<-- p2 text
FORM VALIDATE_SCREEN .
DATA: LV_VBELN LIKE VBAK-VBELN.
IF NOT S_VBELN IS INITIAL.
SELECT VBELN
INTO LV_VBELN
UP TO 1 ROWS
FROM VBAK
WHERE VBELN IN S_VBELN.
ENDSELECT.
IF SY-SUBRC <> 0.
MESSAGE E000 WITH 'INVALID SALES DOC'.
ENDIF.
ENDIF.
ENDFORM. " VALIDATE_SCREEN
*& Form display_data
text
--> p1 text
<-- p2 text
FORM DISPLAY_DATA .
DEFINE M_FIELDCAT.
ADD 1 TO WA_FIELDCAT-COL_POS.
WA_FIELDCAT-FIELDNAME = &1.
WA_FIELDCAT-REF_TABNAME = 'VBAK'.
WA_FIELDCAT-DO_SUM = &2.
WA_FIELDCAT-CFIELDNAME = &3.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
END-OF-DEFINITION.
DATA:
LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
M_FIELDCAT 'ICON' '' ''.
M_FIELDCAT 'VBELN' '' ''.
M_FIELDCAT 'AUDAT' '' ''.
M_FIELDCAT 'VBTYP' '' ''.
M_FIELDCAT 'AUART' '' ''.
M_FIELDCAT 'AUGRU' '' ''.
M_FIELDCAT 'NETWR' 'C' 'WAERK'.
M_FIELDCAT 'WAERK' '' ''.
ENDFORM. " display_data
Regards
Laxmi -
Create subscriptions for Powerview reports like SSRS reports in SharePoint 2010
Hi,
I have created the power view reports in SharePoint 2010 and now I want to create an email subscription for Powerview reports like SSRS reports in SharePoint 2010. Is it possible? If not, is there any workaround?
Thanks,
Suresh.Hi Suresh:
Unfortunately, you can't setup subscriptions in PowerView like you can on SSRS. I would suggest you to open up a connect item here and request for this feature - http://connect.microsoft.com/SQLServer
Hope this helps.
Faisal Muhammed My Blog -
Is it possible to take the CDR data from a v4.2 Call Manager and copy it to a separate server where it would be made available for reporting? We are not interested in migrating the CDR data to v6 because of the concerns it introduces to the upgrade process. Is it possible to get the raw data and somehow serve it from a different machine? (knowing it would be 'old' data that stops as of a certain date). If so, what would be the complexity involved in doing so?
It seems like the CDR data lives within MSSQL and the reporting interface is within the web server portion of the Call Manager... that's as far as we've dug so far.Hi
It is absolutely possible to get the data - anyone you have in your org with basic SQL skills can move the data off to a standalone SQL server. This could be done most simply by backing up and restoring the DB using SQL Enterprise Manager.
Moving the CAR/ART reporting tool would be more difficult... if you do actually use that for reporting (most people find it doesn't do what they need and don't use it for anything but basic troubleshooting, and get a third party package) then the best option may be to keep your publisher (possibly assigning it a new IP) and leave it running for as long as you need reporting.
You would then need a new server to run your upgraded V6 CCM; you may find you need this anyway.
Regards
Aaron
Please rate helpful posts... -
Does report generation possible frm 2 diff projects within single database
we have two seperate projects created in our eme DB. also we have few results present in first project say P1 and Few results are present in Project 2 say P2
Query is
Does it possible to generate Single report for P1 and P2?
if it is possible then this will be a big relief for us.
thanks
gajananpyes only if it is stored in the same database. If both projects results are stored in the same databse, you may view the crystal report graphs that is provided in addition to the built-in reports that is viewable using the report tab. To open the crystal report viewer, go to tools and select Crystal Report Viewer. So, once you have selected the report whose data you would like to see from both project, then click on Add Filters.
In the Add Filters popup, move all the projects you want from available to selected. Once you are completed adding filters, then click OK on the view report popup to render an html report with data from both the projects. Please let me know if this answer was helpful. -
I would like to know if is possible to use the old iSight with the macbook pro (mid 2009)?
Hi,
If the Mac has Firewire then you can use the External iSight
(Other readers
If you have Firewire 800 then you will need an adapter to use the Firewire 400 camera - Search for the word Adpater and see posts by EZ Jim for more details)
Don't daisy-chain the camera with Hard Drives
The camera only uses a data rate of 200Mbps and the differences in Hard Drive data speeds can be an issue.
The External iSIght should work no matter what Firmware is on there currently.
There is some evidence that having the 1.0.3 version (Open the System Profiler > Hardware > Firewire) on the device makes it more compatible/useable in later OS versions
The Updater is included in Tiger and Leopard.
Hard Drive/System/Library/CoreServices/iSight Updater/iSight Updater.app
An OS Update could "trigger" this to be run if you have Tiger
It can also be run as a Standalone.
It is Not present in Snow Leopard and although the documentation says this Firmware is an Audio update some people report that the camera needs the 1.0.3 Firmware to run.
(that could simply be the "Flashing" the Memory involved resets it enough to work)
10:22 PM Wednesday; June 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
How to show more than one record at a form-like style report?
Hi All,
I developed a form-like style report
I want it to show more than one record at once (At the same page)
I tried that by setting the value to "Maximum records per page" property for the repeating frame to 10
but when I close the property palete and open it agian the value is returned to 1 !!!
how to show more than one record at the same page?????
Thank uHi,
there's perhaps another property like "page protect". If than 2 records didn't fit at one page there's a page break. Or is there any object inside the repeating frame with page-break properties? Sorry .. it's like looking into a chrystal ball ...
Regards
Rainer -
Grouping in rtf template like oracle reports - a newbie question
Hello all
I am new to BI Publisher and have probablly a silly question to ask.
I have a basic query that returns a flat xml file which looks something like this. it will have multiple rows.
<ROWSET>
<ROW num="1">
<DATE>01-DEC-2007</DATE>
<PACKAGE>XXX </PACKAGE>
<DROP_OFF>Hotel1</DROP_OFF>
<ROOM>1</ROOM>
<NAME>Test Customer</NAME>
<PROBLEM_RECORDED>N</PROBLEM_RECORDED>
<EXCEPTION>1</EXCEPTION>
</ROW>
</ROWSET>
Because i am fairly new to xml i am at a loss trying to work out how i can form a template that will effectively allow grouping at say
1. Date Level
2. Package Level
3.Drop Off level
4. put all other data in here
In reports i would just do groups and alter the layout accordingly. Obviously if i had an oracle report version of the sql that generates the xml then i could just generate the xml from the report and i would get the xml i am looking for .
But I am working with basic sql not reports and am wondering What do I have to do with my xml to get it looking live the grouping I mention above, given all i have to play with is the example xml I included. I am really bamboozled and think i am missing something simple.
I dont want to have to write multiple queries with different groupings using cast , multiset as I thought one of the benefits of BI Publisher was one query multiple layouts.
Thanks
LisaIf you haev word plugin installed,
please follow the documentation and try using that,
load the xml in the word plugin
and then select insert table/form and then you can do the drag and drop,
and group by each fields.
http://blogs.oracle.com/xmlpublisher/2006/10/30
http://blogs.oracle.com/xmlpublisher/2007/10/30 -
Is it possible to use the JAVA Report Engine SDK to modify DESKI reports?
Post Author: Nadine
CA Forum: JAVA
Hi, is it possible to add a complex filter to a DESKI report using the JAVA report engine sdk?
In the developer tutorials for this API, I've only found references to WEBI in terms of modifying reports, though it seems to be possible to view DESKI reports with this sdk.
I am a bit confused in terms of the scope of this API and how I would use it in regard to DESKI.
Many thanks for any suggestions!
NadinePost Author: Ted Ueda
CA Forum: JAVA
Current (XI R2) version of ReportEngine API only supports refreshing/viewing functionality for Desktop Intelligence documents. Document modification/creation is only supported with Web Intelligence documents. Queries aren't modifiable for Deski using ReportEngine API - you can only do so using Desktop Intelligence Reporter SDK, which is COM based.Sincerely,Ted Ueda -
Save the report in PDF format on the server: is it possible?
Hi all,
Is it possible to save the report in PDF format on the server?
In other words, in a web application:
1) the user requests a report
2) the report produced in PDF format, is saved on the server, where is the Java Reporting Component
3) the report, in PDF format, is sent to the client's user
Thanks a lotPrintOutputController.export, get the byte stream, save on server.
Sincerely,
Ted Ueda -
Hello I would like to report game loft order and chaos that's I but rune stones buy my visa around 300 usd and runes was on sale but thy don't add the rune stones it's 5700 Rune stones I report to game loft 6 time and thy ignore me I'm here to Complaint that to iTunes I wish you help me for this complaint cause this game loft always ignore people only take moony and no replay . Ty
You are not addresing Apple here. Were are all just users like yourself. Contact Apple/iTunes by:
How to report/refund an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
Maybe you are looking for
-
I Am trying to download an ebook to my new iPad mini. I already had an account for my ipad2 but forgot the pw. I successfully changed the pw, but it still won't let me sign on. Says incorrect pw. Ultimately I would like all 3 of my devices (iPhone)
-
When I print or copy I SELECT black unless I need color. Today I need to copy very important materials to mail, I am disabled, cannot run to the store, and I can't copy because the yellow is empty. Why is the yellow toner empty if I am selecting blac
-
F.27 ACCOUNT STATEMENT NOT PICKING OPEN ITEMS
When I run F.27, and fillin all required fields, and click execute but get a message that no data exists. THough there are balances for this particular customer but in F.27, it is not picking up that customer. What am I missing. I have chosen the cor
-
Want to download the segment structure into xsd or wsdl
Hi Guys, I want to dwonload the segement structure (E1KNA1M) into XSD or WSDL. Then i can import into XI as datatype, How can i download the segment structure into XSD? Thanks Srinivas
-
JMS consumer is not receiving any messages. am i missing something ?
Hi bellow is the consumer code, my consumer is not receiving any messages even though there are messages in the queue. I have tried to debug the code. but the consumer is not calling the onMessage() method even though there are messages in the queue.