I'd like to select print paper size with using AxAcroPDFLib method depend on user

I'd like to select print paper size with using AxAcroPDFLib method depend on user
request. Is it possible? in AxAcroPDFLib?
Is there any method to select print paper size in the C# programming.
Or if you know another method, please introduce how to use.
Thank you for your cooperation always.

I am pretty sure that you can only do this from JavaScript or from C/C++ APIs.

Similar Messages

I cannot select the Paper Size when I try to print with HP Photosmart B110a with Windows 8.1 64bit

I cannot select the Paper Size when I try to print with HP Photosmart B110a
The same printer was working OK with my old PC with OS Windows 7
However I got a new PC with OS Windows 8.1 64bit
I installed the new driver for HP Photosmart B110a that I dowloaded from HP site. Driver forWindows 8.1 64bit.
In addition to not being able to chose the paper size, also when I go to Printer Properties in Options, all the characters are non-ascii.
Do you know what may be the problem?
Thank you

Hello Nanu64,
Welcome to the HP Forums.
I see that you are having some issues when attempting to print from your computer.
I also see that you stated that not all the options are available in the printing preferences options. This could be because the installation was not complete or it failed.
I suggest that we do a complete uninstall/ reinstall as well as some additional steps.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
If you have the printer connected to the computer with a usb cable, please remove the cable from both ends and leave it disconnected until further notice.
The next link that I have for you will give you detailed instructions for Uninstalling the Printer Software. Once the uninstall is complete, reboot the computer so that the changes take affect.
When the computer is back up and running, please disable any firewalls or anti virus protection you may have running. We don't want anything getting in the way of the reinstall.
The following download is the HP Photosmart Full Feature Software and Drivers. Save this download to the desktop of the computer so that it creates its own icon. This will make it easy for us to find when the download is complete.
Double click the new icon and follow the installation instructions. The installation will give you connection options (Wireless , usb or Ethernet), if connecting usb, please wait for the prompt to connect the cable. Connecting the usb cable before hand can cause an issue with the installation.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Not able to print to custom 4x6 paper size with Pages 5

I'm having a lot of trouble printing to a custom 4" x 6" paper size with pages 5. I create my custom size, switch the page setup to use that size in landscape orientation, and everything looks fine. Then when I go to print the document the destination paper size is set to "Suggested Paper: US Letter" instead of "Custom" as it used to be. If I do print on US Letter paper then its properly lined up at the top left corner, but if I print on 4x6 it is all cut off. I've tried scaling it to fit on my 4x6 size in the destination paper size menu, but that just shrinks the whole thing to fit in the center of the 4x6 in portrait orientation.
I am able to do this fine in pages '09, however I've already converted over 40 recipe cards to work with pages 5 and they don't export back to pages '09 properly.
If anyone has any suggestions on how to get this to work I would really appreciate them!

Hi,
here a short extract like i do it:
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
    METHODS:
   HANDLE_PRINT_TOP_OF_PAGE
         FOR EVENT PRINT_TOP_OF_PAGE OF CL_GUI_ALV_GRID,
ENDCLASS.                    "LCL_EVENT_HANDLER DEFINITION
* Event-Händer Implementierung
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
METHOD HANDLE_PRINT_TOP_OF_PAGE.
      PERFORM PRINT_TOP_OF_PAGE.
ENDMETHOD.
ENDCLASS.
CREATE OBJECT GR_EVENT_HANDLER.
SET HANDLER
GR_EVENT_HANDLER->HANDLE_PRINT_TOP_OF_PAGE FOR GR_ALVGRID_LEFT.
CALL METHOD GR_ALVGRID_LEFT->SET_TABLE_FOR_FIRST_DISPLAY
FORM PRINT_TOP_OF_PAGE.
LINSZ = SY-LINSZ - 16.
WRITE: / 'Report:   ', SY-REPID,
           AT LINSZ 'Datum:', SY-DATUM.
WRITE: / 'Benutzer: ', SY-UNAME,
           AT LINSZ 'Zeit: ', SY-UZEIT.
ENDFORM.
hope it helps.
Regards, Dieter

Photosmart C410: How do I associate a custom paper size with the photo tray?

Our Photosmart 3310 recently broke down and I purchased a C410 to replace it. I sell a small item online that I ship in 3 5/8 x 6 1/2 envelopes. With the 3310, I had figured out a way to print the envelopes from the photo tray. While Word 2007 allows me to select the photo tray, the printer would not print from there until I created a custom paper size in the printer preferences dialog box.
One of the reasons I got the C410 was for the photo tray. It's a real pain to have to swap out the regular paper and stick in one evelope every time I want to print another envelope. Well, unfortunately, that's what I've been doing. I select the photo tray in Word, but the printer goes right ahead and prints from the main tray. I had forgotten what I did to make it work on the 3310, so I experimented with that printer's drivers until I figured it out.
My problem is that the software interface for the C410 is different than that for the 3310. I can't figure out how to associate a custom paper size with the photo tray. To test my theory this evening, I told Word that my envelope size was 5 x 7. The printer didn't hesitate to take an envelope from the photo tray. Of course the return address went into a dark void because the envelope is not 5 x 7.
The difference between the two interfaces is that the 3310 has both printing shortcuts as well as "Print Task Quick Sets." The C410 only has printing shortcuts.
If anyone can help me, I'll be very grateful! I've probably spent hours trying to get this figured out, and I have no idea what to do.

Hi,
Which Microsoft product (application) are you using ? Printer supports the following custom sizes:
From ADF: Custom-sized media (ADF) between 127 to 216 mm wide and 241 to 305 mm long (5 to 8.5 inches wide and 9.5 to 12 inches long)
From input tray: Custom-sized media between 76.2 to 216 mm wide and 101 to 762 mm long (3 to 8.5 inches wide and 4 to 30 inches long)
You need to select right custom size from the application.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am unable to select the correct paper size when printing photo's in iPhoto 11. When I select the paper size in the custom window for 4x6 prints the prints only appear on an 8 1/2x11 page. My Mac is a year old iMac running 10.8.2.

I am unable to print 4x6 photo's using iPhoto 11. When I do they only print out on lettter size paper even though I enter 4x6 in the custom window in the print size menu. My older Snow Leopard system using iPhoto 9 the paper size window offered a 4x6 paper size which worked well.

Selecting paper size in the first sreen tellis iPhoto what papery you are going to use - it does not tell the printer what paper to use - printer specific options on on the last (second or third if you customize the print) screen where you tell the print any specifics like paper source (typically printers need to you tell them where a specific paper is loaded - they do not really know the sizes in each paper tray)
LN

Printer selects wrong paper size

when I sent a document to the eprinter it selects photo paper instead of typing paper. How do I correct this? I have changed the preferences to no avail

Why type of document is it that you are sending. By default our ePrint servers will print a photo on 4x6 and a pdf or .doc on a 8.5x11. As of the moment, there is no way to change this.
M. Moss
Click on the BLUE KUDOS button on the left to say "Thanks"
If my reply solves your issue, please mark it as solved to help fellow users fix their similar issues!
Though I am an HP Employee, ALL of my posts express MY opinion, and not of HP, whatsoever.

Print Paper Size Problem after Mavericks Upgrade

I migrated my Apps, Data and System Settings from a Macbook running OSX Lion to a new Macbook Pro running Mavericks.
The problem I now have is that the application 'Family Tree Maker 2' cannot get the paper size right. No matter which Paper size I select, it is shown as half size in the Application Print Preview screen and this error carries through to actual printing.
so A4 210 by 297 mm displays as 5.8 x 4.1 inches (which is Half Size).
The problem is significant because the application formats it's output to fit into half of the available space.
I have unsuccessfully tried;
- removing and reinstalling the Application.
- Adding my Brother Laser printer with the latest Mavericks compatible driver.
- Resetting the printing system.
- Repairing disk permissions
- Adding a new User Account
- Deleting plists associated with com.ancestry
iWork Pages is working correctly.
I have raised this with ancestry.com however it appears that I am the only person that has experienced this problem.
Any suggestions would be appreciated.

Problem is worse than that. Whilst the Paper is shown as half size, the family tree diagram boxes are produced twice as wide as they should be.
If I select A4 Paper, a diagram that would fit on one page is now spread across two.
If I select A3 Paper, the preview indicates the paper size as A4 8.3 x 5.8 inches however the diagram size and position on the paper are unchanged and I just get loads of white space around the outside of the diagram.
It does sound like an Application problem but it is still working fine on my old OSX Lion machine. Something has happened in the migration.

Selection of paper size

i have to create sap script on free printed layout.preprinted paper size is 8.5*12 inches so in se71 basic settings , form page which page format i required to select .
ex .dina4 or dina3 like so... which page format is suitable for 8.5*12 inches .
but dina4 is taking 8.5*11 inches .
so i want 8.5*12 inches which page format is suitable.
my basis consultant is not able to give the solution.
if any one gives answer i will appreciate them.

Hi Rao,
Please don't open new thread.. Try to reply in the same thread.
Now for your Scenario you need 8.5*12 inches,
Check table TSP08( Paper formats). It contains all the list of page formats.
Check in all units for example 8.5 * 12 inches ==> 215.9 * 304.8 MM or GOTO SPAD and create one for yourself.
Then in your SAPscript use the desired page format.
Reward points to all useful efforts.
Regards,
SaiRam

JAva Printing (Paper Size)

Hello
I've got a big problem when printing some labels to a printer from java.
The label printer is a Toshiba Tec B-SV4
I need to print some labels to the printer. The labels have a 4 by 4 inch size.
The first thing I do is select the printer:
        PrinterJob printerJob = PrinterJob.getPrinterJob();
        try {
            printerJob.setPrintService(services[selectedService]);
        } catch (PrinterException ex) {
            ex.printStackTrace();
        }Then I pass some attributes:
PrintRequestAttributeSet printRequestAttributeSet = new HashPrintRequestAttributeSet();
        MediaSizeName mediaSizeName = MediaSize.findMedia(4,4,MediaPrintableArea.INCH);
        System.out.println(mediaSizeName.toString());
        printRequestAttributeSet.add(mediaSizeName);
        printRequestAttributeSet.add(new MediaPrintableArea(0, 0, 288, 288,MediaPrintableArea.INCH));I also set the page format:
        PageFormat pf = new PageFormat();//pj.defaultPage();
         Paper p = new Paper();
         p.setSize(288,288); // about 4in x 4in
         p.setImageableArea(0,0,288,288);
         pf.setPaper(p);
        printerJob.setPrintable(this,pf);
        printerJob.setPrintable(this,printerJob.pageDialog(pf));The problem comes when printing.
If I show the native print dialog to the user (WindowS), the correct paper size for the label is not selected.
Instead, if I show the cross-platform printDialog, the correct paper size doesn't appear in the options, the options shoud be "User, 2 x 4, 4 x 4, 4 x 6", instead, you just can select between "2 x 4 and 4 x 6".
In the native version, all options appear
Any suggestions?
ThanlYou

I was wrong when I typed the code into the forum, the actual code shoul look like follows:
        PrintRequestAttributeSet printRequestAttributeSet = new HashPrintRequestAttributeSet();
        MediaSizeName mediaSizeName = MediaSize.findMedia(4,4,MediaPrintableArea.INCH);
        printRequestAttributeSet.add(mediaSizeName);I solved the problem (not the best solution but functional) installing some generic drivers from:
http://www.nicelabel.com/downloads/drivers/tec.php
maybe this can help someone with the same problem.
The fact is I would like a better solution rather than using 3rd party drivers.
Thanks for your anwser Franck.

Epson R2880 - Will not print - paper sizes

I am having major problems with trying to print to a R2880. I have recently purchased it and have had problems with printing to it from the beginning. Sometimes it works but mostly it doesn't.
The Epson driver is 6.2 which is the latest. I am running Leopard. Do not want to upgrade to SL cause what I read shows FCS2 does not run on it.
Keeps on telling me that the "Paper source selected in the printer doesn't macy the paper loaded in the printer" which is of course bollocks.
I have tried the solution offered by a previous post which was to got to the print preview and then Cmd - P and then choose the right paper. Worked fine on an A4 but when I did the same for a 10 x 15 cm no go.
It suddenly started working the other day but when I chose a selection of 10 x 15's (varied portrait / landscape aspects) to print it did not orientate them correctly. The paper was installed in a portrait arrangement yet not one of the photos printed on the page correctly.
What a waste of time this printer and Aperture are.
Can anyone help on this most frustrating problem. I have had this printer for a few months and have only managed to print a handful of photos !
Regards

Hi Colin,
The R2880 is a little finicky when it comes to paper source. A couple of questions:
• What paper are you using? What size? Are you using the back tray or the main tray? I had a ton of problems with the back tray and that very error. I now always use the main tray, but it depends on the paper you use since certain types can only be loaded in the back.
• Are you making sure the preset you choose is for +sheet feeder+ and not +roll paper+?
The Preview solution you read about is probably mine and was brought on by SL. Fortunately 10.6.2 fixed that problem but I've still had the paper source error come up a couple of times - I need to open the print settings for the preset I want to use and save it again (it's as though it needs to be reminded that it should use the sheet feeder, even though that setting is saved right there in the preset).
My first thought was that your problem might have to do with the non-conventional paper size, but I also make custom 16x12 prints on 13x19 paper and don't have problems at all.
I'm guessing it's probably a combination of settings and paper type...

Safari won't let me change printer paper size

I am having a bizarre problem printing USPS labels from Safari. For some reason it shows my paper size as 13x19 in the printer dialog and there is no way I can change this (I tried in the printer driver and through System preferences and the changes would not "take"). I have three HP printers and only one of them can print 13x19 paper. I tried changing the default paper size on all three printer drivers but they all will only show 13x19, so if I try to print a 8x11 document on any of the printers, it won't print scaled normally to 8x11 paper - instead I get large font prints that are cut off. I tried different "scale to fit" settings in the drivers and nothing worked.
Finally, I switched to Firefox and it worked perfectly!
Interestingly, when I try printing a normal webpage from Safari, it WILL print on 8x11, but not a USPS label!
If anyone can help I would greatly appreciate it.
Thanks
Peter

Safari won't let me customize a new computer on the Apple store website.
Try emptying your Safari cache. From the Safari menu bar click Safari > Empty Cache
If that doesn't help, go to the menu bar again, click Safari > Reset Safari
Select the top 5 boxes, click Reset.
Quit then relaunch Safari, try the Apple Store http://store.apple.com/us
If you have installed any extensions, back to the menu bar, click Safari > Prefereces then select the Extensions tab. If you have any installed, turn that OFF, quit then relaunch Safari to test the store.
And make sure Java is enabled in Safari > Preferences - Security
edit by: cs

I have recently bought an HP Colourlaserjet CP1215 printer paper size problem

I have recently bought an HP Colourlaserjet CP1215 printer and would like to print on custom sized card of 280 x 140 mm to make a greeting card 14 cm x 14 cm, which I believe falls under the custom size options.of (127 - 356) mm (3 - 8.5) x (5 - 14) inches) The design either prints at the bottom right ofthe page or not at all. I have made sure my software and the print settings are the same, but it still doesn't work. If I am only supposed to print on the sizes given in the literature why is there a custom print option? Help, please
Many thanks
GMJ

Have you got any chance with this issue. It seems I cannot change the paper size as well!!!!!!

Can I programmatically change the printer paper size from ActionScript?

Hi,
I'm a newbie Flash/ActionSript developer and I have been searching for answers for a while with no luck. I wonder if I can get some pointers from this forum.
I'm trying to programmatically print a movie clip to 8.5" x 11" plain paper regardless of the current paper size setting in the printer. e.g if the user's printer is currently set to use paper size A4, can I change the setting to Letter (8.5" x 11") from ActionScript at runtime? I use PrintJob class for printing the movieclip.
According to the ActionScript online API spec ( http://www.adobe.com/livedocs/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context =LiveDocs_Parts&file=00002066.html), I can only READ the paper size setting after the call to PrintJob.start. I can't believe that we are not allowed to change the setting. Maybe I missed something here. Can somebody help me out?
Thanks in advance!

check your duplicate thread.
and, please don't cross-post.

Can I programmatically change printer paper size from ActionScript?

Hi,
I'm a newbie Flash/ActionSript developer and I have been searching for answers for a while with no luck. I wonder if I can get some pointers from this forum.
I'm trying to programmatically print a movie clip to 8.5" x 11" plain paper regardless of the current paper size setting in the printer. e.g if the user's printer is currently set to use paper size A4, can I change the setting to Letter (8.5" x 11") from ActionScript at runtime? I use PrintJob class for printing the movieclip.
According to the ActionScript online API spec ( http://www.adobe.com/livedocs/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context =LiveDocs_Parts&file=00002066.html), I can only READ the paper size setting after the call to PrintJob.start. I can't believe that we are not allowed to change the setting. Maybe I missed something here. Can somebody help me out?
Thanks in advance!

you can't change the paper size used in client side printer.

Can I print to different paper sizes with AirPrint and Safari?

I am the organizer of a trade show coming up.
We are using a web based registration system for attendees.
To print the attendee badges, we simply log in to the site through the net, and print them. I have an HP CP1525nw loaded with 3x5 index cards that will slide into the badge holders.
When printing from the Mac, I simply go to Page Setup, set the paper size and orientation and print.   It works great.
However, we would love to use iPads for our registration staff. Not only are they less expensive, but they are portable, and totally wireless.   We can access the site just fine, and the badges show great on the screen.   The website generates the badges as a .pdf file and they load into the browser.
When printing from the iPad, the badges print HUGE, filling an entire 8.5x11 size page.   With the 3x5 card stock loaded in the paper tray, they still print huge, only showing the portion of the badge on the 3x5 card in the location it would be had there been letter size paper in the tray.
Any ideas?
I've considered formatting another badge for letter size, and having it print only where the 3x5 card would fall... but that is a huge tweak that I think should be unnecessary.
How do I print to different size paper from my iPad?
Thanks for the help in advance.
--Brian

Thanks for the info.
It will let me send the PDF to eprint.... and there are paper size choices.
However, they only offer Letter, Legal and A4.
My printer DOES support 3x5 index cards. But, the option is not listed.
Any other ideas?

I'd like to select print paper size with using AxAcroPDFLib method depend on user

Similar Messages

Maybe you are looking for