I'd like to stop seeing the warning about iDrive

When I open numbers or pages, I got a warning that iCloud Drive is not compatible with Mavericks.  Fine--I'll wait until I upgrade later this year, but how can I stop getting the warning every time I open one of these applications?

In the iCloud preference pane, uncheck the box marked Documents & Data.

Similar Messages

  • ATV stopped seeing the wifi network

    Immediately after having done the latest firmware upgrade few days ago, the ATV stopped seeing the wifi network. Even if I type the network name in manually, no luck, it can't find it. Clearly an issue due to the latest update. The problem is that since it cannot connect to internet, it won't even reset to factory settings. Any help?

    It isn't an issue with the latest update per se, otherwise everyone else would have the same problem, it's an issue with your specific equipment, whether that be a faulty Apple TV, a corrupt install or something to do with your network. The difference being either your Apple TV is broken or it can be resolved.
    Can it see any other networks.
    Have you tried restarting it.
    Have you tried restoring it.
    Have you tried temporarily diabling network security.
    Have you tried adjusting any network settings.

  • How do i stop getting the page about syncing, it opens a window everytime for this action

    how do i stop getting the page about syncing, it opens a window everytime I start firefox

    It sounds like it's loading as (part of) your homepage. Have a look in Tools | Options | General.
    See [[How to set the home page]] for more info.

  • About the warning about changes message.

    Hi all,
    There is a messageChoice on the page,and the messageChoice must fire an action.But if the action is fired,then I click on the other tab or link, warning about changes message will not occur and directly farward to the other page.Is that possible that popup the warning about changes message after the messageChoice's event was fired ?
    Thanks,
    binghao

    Hi,
    this question is hard to understand. I don't see a messageChoice component in ADF Faces, can you give more details to your usecase and the components involved
    Frank

  • How can I see the information about a file used in a sequence?

    How can I see the information about a file used in a sequence?

    You can use pretty much any two or multiple button mouse on a Mac, right out of the box.
    I use this one: http://www.apple.com/mightymouse/

  • Since the last update, every time I open "Numbers" I get a notice that a font is missing.  How can I stop seeing this warning?

    Since the last update for "numbers", everytime I open numbers I get a notice that a font is missing.  I don't care that it's missing and I would like to not see that message.  How can I get rid of it?

    A document you had open at the time you quit Numbers has a font that you do not have (probably Calibri).  You can change the font to one you have OR close the file before you quit Numbers.  Numbers will open files you had open when you quit.
    Looks like:
    The other thing you can do is check the box "Close windows when quitting an application" in "System Preferences > General"

  • My IMac has stopped seeing the keyboard. I have changed the batteries and the green light comes on saying it is looking to pair with the IMac but without success. I am left with the IMac switched on and I am unable to enter a password.

    I have been using my IMac without a problem when I left it and went back to enter the password the IMac did not see the keyboard. I have changed the batteries and the green light comes up on the keyboard and then starts to flash indicating it is looking for the IMac but nothing happens. I have tried another set of new batteries with the same result. Is there any known problems in this area. The IMac is 5 months old.
    Thank you for any help

    What operating system does your iMac have? (please always post your operating system to prevent confustion).
    If it's pre-Lion you will have to set Mail up manually:
    Entering iCloud email settings manually in Snow Leopard or Leopard
    Entering iCloud email settings manually in Tiger

  • Computer stopped seeing the external drive 500MB Canvio USB3

    Hi
    Had a slight accident with my external device while using a backup program, pressed clone not backup from C: partition to the external drive. I realised after i did it, so cancelled the operation after about 1%. Noe the drive (E will not appear on this computer or any other. Can i recover or do i have to reformat the external drive and if so how do i reformat it? Thank you.
    Stuart

    Check if the external USB HDD appears within the Disk Management.
    1. Go to Control Panel → Computer Management
    2. In the left pane, under Storage, click Disk Management.
    3. Here you should see the different HDDs / partitions.
    4. Select the external USB HDD
    5. Right-click the volume that you want to format, and then click Format.
    6. To format the volume with the default settings, in the Format dialog box, click OK, and then click OK again.
    7. click Finish.
    More info in MS knowledge website
    http://windows.microsoft.com/en-us/w...disk-partition

  • I keep receiving the warning about dropped frames? How do I fix it?

    I have already changed it off of Unlimited RT.

    You can just turn it off. That warning simply means that FCP can't call the frames up and/or apply the effects (if any) fast enough to play the timeline in 100% real time. So it drops some frames while playing the timeline back at play speed.
    This is only an issue if you are playing out the timeline to tape, if not, and you are going to output the timeline as a file - then you don't need to to worry about it.
    Final Cut will just do its best to show as many frames as it can as it plays, but when you export the timeline, all the frames will be exported.
    The warning is a legacy warning from the days of videotape. You can switch it off by unchecking the warn next time box, or going the menu Final Cut Pro > User Preferences and on the General Tab, uncheck the box for "report dropped frames during playback".
    Having said all that, it looks like you are working with camera files that H.264 or variants, is this correct?
    You should convert all the footage to ProRes and then edit on a ProRes timeline. H.264 footage is problematic in FCP-7.
    MtD

  • Intel Mac Mini - Does not eject Discs or see the disc that is stuck

    It seems like the mac has just stopped seeing the CD drive. I put a disc in there (an installer disc - not a CDR) and the disc didn't mount... I thought it was odd and tried to eject it. no go (not even the sounds like it is attempting to eject). I check system profiler and it lists:
    ATA Bus
    - MatshitaDVD-R UJ-846
    So, the profile reads the drive.
    I tried restarting the machine holding the mouse button down and no luck.
    Even by pressing the eject button, I do not see the greyed out eject symbol on the desktop that usually appears when you hit eject.
    Any ideas anyone?

    The open firmware method doesn't work on intel macs unfortunately (at least the command-option-f-o method).
    starting with the eject key didn't work either...
    in the end, I cracked open the case, popped the top of the drive off, removed the disc by, re-assembled. Note that at this point the computer still thinks there is a disk in the drive. However, upon attempting to read a disk (that isn't there) on boot, the computer realizes this and unlocks the releasing mechanism, so it "ejects" clearing the drive bay.
    To be safe, I rebooted a few times... then booted from CD a few times... then booted normally. All seems to be ok.
    I do not recommend this method to anyway. This should be done as a last resort by Apple techs. The only reason I did this is because I am pretty far away from any apple service center. For me, I have an external burner attached so had I destroyed the CD drive, I would still have been "ok". Again, this most likely voided my warranty, and I do not suggest this to anyone.

  • Don't see the external drive

    So I just installed Tiger. I still have OS 9 with Classic.
    Two problems but I will separate them and post only one here.
    1) I have an external drive, OWC Neptune firewire 300 GB with 20 folders or so. But now, after installing Tiger, when I click on the external drive (the icon is visible in OS X but not in Classic) I see only the Hard Disk Speed Tools (1 folder with 7 files that are technical). I don't see any of my folders and files I saved-- about 1 GB more or less)
    Please tell me it's not gone !
    Why is it that the external drive icon is visible in OS X but not in Classic ?
    Also I tried to see how much GB I have on the external drive but it doesn't give me any indication. When I click ->Get info it shows size : 3.2 MB

    Hi eew, Thank you for your answer.
    When Classic is running, OS X is controlling the computer, and your access to external drives is the same as when Classic is turned off. Are you confusing Classic operation in OS X with booting the computer into OS 9 (OS X is not running at all)? The difference may seem to be purely a matter of semantics, but it isn't.
    1) No, when I turn on my computer it runs on OS X but Classic is also available (I turned the option to turn on both) but what appears on the screen is OS X.
    2) > Are you confusing Classic operation in OS X with booting the computer into OS 9 (OS X is not running at all)?
    I think I must put an OS 9 disk to boot into OS 9 don't I ? (I mean now that I have Tiger) The OS 9.0.4 disc is sitting comfy in a disc holder.
    OS X is always present. When I shot down/wake up it is OS X. Then I see a file (I guess you can call it that) with the title "Classic starting up using "system folder" on "MacIntosh HD" and see the bar in progress. but nothing else. Then the Classic logo (the 9 in a square) is on the top bar. But the desktop doesn't show anything. If I click on the Classic logo and - -> "Start Classic" then, and only then do I see the familiar (and lovable) OS 9.2.2 on the blue background with the 2 faces loading.
    3) >When you start your computer up in OS 9, you aren't using Classic you're running OS 9.
    Hum, same as above, this is IF I put a OS 9 disc.
    I installed OS X so I don't have OS 9 anymore to start. It start on Tiger with OS Classic also available.
    So it is not completely true when they say in the installation option "Tiger will load (in single partition) on top of OS 9" since in fact it uses something new which is Classic. So I install OS X therefore OS 9 is not used anymore. And OS X contains a folder with this idea of a OS 9 substitute called Classic. It is not OS 9 and it is not OS X it's something in between.
    4) >Under those circumstances, you won't be able to see any unpartitioned 300GB hard drive, internal or external, even if OS 9 drivers are installed.
    Huh ? I installed the external drive when I still had OS 9.0.4 using the firewire connection.
    The external drive came with a disc. The installation/set up said :
    "Mac OS X : -Drivers not required. Proceed to hardware installation.
    Mac OS 8.6-9.2.2- Firewire :
    Insert the HDST CD (they mean by that the Hard Drive Speed Tools) and follow the instructions provided by the installer. You may need to install Apple's Firewire drivers, see the tech center for details"
    I put the disc, followed the instructions and it says installation succesfull.
    I did not install or open any other files /folders present on the external drive.
    I saw the external drive logo on my desktop, I copied 20 files or so in it. I opened them to check if everything is OK before I trash the original so I don't understand you saying I won't be able to see any unpartitioned 300GB hard drive.
    I didn't partition the external drive. I just installed it, open it and start copy files on it.
    5) As for the
    "You may need to install Apple's Firewire drivers, see the tech center for details"
    I didn't see any warning about that and as I said, I started using the exter. drive. "You may need" and You must" are 2 different things. I assumed everything is OK since I used the external drive without problem. Wrong assumption ?
    Days later I upgraded incremently to 9.2.2. (first 9.1 then 9.2 etc) and I still used the external drive to copy files hours before installing Tiger (to make room for Tiger).
    Now I have Tiger.
    And they said Mac OS X : -Drivers not required.
    Beside I see it on OS X so that's not a problem
    Actually I just tried right now to see if the external drive works by dragging a file on it and nothing happened. With OS 9.0.4 it immediately started to copy and I could see a bar showing me the progress.
    I open the Drive and see that the Hard Disc Tool files folder (which has 7 files) has at least 3 files that has a connection with Classic: One is called "Integrity Classic" the other "Quick bench Classic" and another "Disk Defrag Classic HDST" Not sure if it has any connection with OS 9 Classic ? I guess yes because
    When I click to see what it is I get a message
    "Sorry, this program is not compatible with OS X or OS X Classic mode. Please reboot your computer into Mac OS 9 to run this software."
    6) Will that solve the problem ? But if I reboot using OS 9 (the disk) wouldn't that jeopardize Tiger ? And a need to re-instal Tiger ? Maybe it won't erase it (or will it ?) but I will have to work (erggh!) on re-doing stuff ? That is why I want to install OS 9 on the external drive.
    7) I'm thinking of installing OS 904 (from the disk that came with the computer 5 years ago) on the external drive (and then I will upgrade to 9.2.2 ) so I will have the real OS 9, the one I like, the one I'm used to (Not the pale Classic) and which I prefer to Tiger.
    Is that a good idea ?
    I will have Tiger on my internal HD and I will have OS on the external. Then I can forget about Classic which is confusing ; It is not OS 9 and it is not OS X it's something in between. (I will not bother to erase Classic or reinstall OS X alone or anything like that it's there, it will stay there but I will not use it.)
    Although I will use Tiger 90% of the time.
    I feel guilty for being so long.
    But reading is good

  • Windows 8.1 will not see the Printers host name or ip address

    I have tried installing an OfficeJet Pro 8615 on two different Windows 8.1 computers (wireless)  but did not connect.  Pirnter is connected to network wireless (192.168.111.153). Router is 192.168.111.1. The printer was installed from a Vista (wired) desktop and it connected and printed fine. Both 8.1s can ping router but not the printer. Host name install does not work either. Router is a new Cisco RV180w. It works fine everywhere else. Printer wireless power is 5 of 6. Have looked for shared devices setting on Win 8.1 but have not found it yet. Win 8.1 computers are both 64bit and the install download showed 64x. I am running out of things to check. Can anyone help me? Win 8.1 computers sees other devices on the network but not the printer. Print & Scan Doctor does not see the printer either.
    Now I am having the same problem with a Win7 (64) install. It can't see it either. Once I plugged this one into the network then it saw the printer and installed and printed. But if I unpluged the network wire and made it wireless then it stopped seeing the printer. So I am having some  kind of a wireless issue.

    Hi @EdEdata ,
    Thank you for visiting the HP Support Forums and Welcome. Thanks for all the details of what you have done and the restuls. (Very helpful) I have read about your HP OfficeJet Pro 8615 Printer not connecting wireless and is not seen by the Print and Scan Dr. Here is a document on printer does not keep a wireless connection.  Try assigning a Static IP address. You might have to change the channel.
    Make sure your computer is connected to 802.11b/g/n wireless router over a 2.4 GHz connection. NOTE: HP Printers are currently not compatible with 802.11n 5.0 GHz networks. This HP document here, explains about a printer wireless.
    If this does not help you, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • I have upgraded to 8.0 and the version number comes up correct except in most sites it says I'm running 3.5.6?? I have continually upgraded and don't know how to make websites see the upgrade.

    Everytime there is an upgrade I install it. My browser says I'm using 8.0 and that my browser is up-to-date. However, when I try to install Firebug for 8.0 or any other add on it says I'm using 3.5.6. Even gmail is saying that my browser is out dated! How can I get my browser to be truly updated??

    Your UserAgent string in Firefox is messed up by another program that you installed. <br />
    [http://en.wikipedia.org/wiki/User_Agent]
    type '''about:config''' in the URL bar and hit Enter <br />
    ''If you see the warning, you can confirm that you want to access that page.'' <br />
    Filter = '''general.useragent.''' <br />
    Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. <br />
    Then restart Firefox

  • I have a grey screen on start up and can see the sign in page in the background. How do I resolve this issue.

    After my iMac has been asleep for sometime and I wake it up there is a grey screen with a load bar running at the bottom, but I can see the sign in page in the background. It eventually goes to the sign in page but it still takes a minute or so before I can actually sign in as well the mouse and keyboard are froze during that time as well.  One it unfreezes the iMac seems to work as usual.  What is going on and how do I resolve?

    Hello there Kenorb1,
    It sounds like your computer is unresponsive and the screen is grayed out with a loading bar and is unresponsive for a bit. From what you describe it sounds like you are seeing the computer wake from Safe Sleep. Here is some more information about what that is and why it is happening:
    Mac computers: Progress bar appears after waking from sleep
    Safe Sleep ensures that data stored in main memory will not be lost should the computer shut down due to the battery being drained completely . Prior to your computer entering sleep, Safe Sleep automatically saves the contents of main memory—such as desktop settings, open applications, and other work in progress—to the hard drive. 
    There are two situations in which a computer will enter safe sleep:
    In the event the battery becomes completely depleted while the computer is asleep, the computer will shut down. But when a power adapter is connected or a freshly charged battery is installed, the computer can be restarted. Press the power button as if turning the computer on and it will automatically return to the desktop state that existed prior to entering sleep. This means that applications and files will remain exactly as they were prior to the computer being put to sleep, making it easy for you to continue with your work.
    With the release of the OS X Mountain Lion v10.8.2 supplemental update 2.0, a new feature was introduced to enter safe sleep after four hours of the computer being connected to AC power. This is an effort to comply with the European Energy Standards (ErP Lot6). This will only occur if there is no wireless or Ethernet activity and no activity from external devices such as USB storage devices. 
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Why users with rights defined as View cannots see the data of the form ?

    Hi,
    I have a nice form page. My application has an authorization scheme with an authentification function : return acl_custom_auth. It is working well. I have defined users with Edit, View and Admin rights. Unfortunately on a form, if the user is defined as "View" he cannot see the data, he only sees the item but their content is not diplayed. I don't understand why. I would like him to see the data.
    The authorization scheme of the page is "Access control -view" as well as the items of the page.
    Do you have any idea of what is going wrong here ?
    Thank you for your kind help !
    Regards,
    Christian

    Another thing that can be done though mon tech-savy people may not know about it.
    Locate a group of PDF's and select at least 5-6 of them as a Group.
    hold down Option key while click on file menu
    Click on Get info.
    One window will open for the group.  in Mountain Lion (OSX.8.2) the term will change to Show Inspector.
    click on the  button next to Open With.
    choose either Reader or Acrobat.
    just bellow is a question Use Acrobat (or Reader) to open all files of this type, Click on it and choose yes.
    Make sure you have a mix of Adobe PDF's and Preview PDF/s for  this to work. If it wasn't good for opening other Type Files I'd compress Preview and throw the original away. It’s a nusiance.

Maybe you are looking for