I'd like to use the categories from my outlook contacts, i'm looking for recommended applications

i'd like to use the categories from my outlook contacts, i'm looking for recommended applications?

There is a third party I tried it. Didn't work for me because they wanted me to sync my contacts on their cloud. It doesn't work with USB Sync. But if you want to try it here:
http://www.companionlink.com/products/outlook-categories.html
Best would be if Apple adds the feature and supports the categories!!!

Similar Messages

  • I have a Thunderbolt iMac 27" with a Thunderbolt Display attached.  I would like to use the iMac and Thunderbolt display in Target Display Mode for my new Thunderbolt MacBook Pro.  So far, it seems I can only use the iMac screen itself.  How do I do this?

    When I press the Command + F2, the iMac screen becomes a secondary for the MacBook Pro, and the Thunderbolt Display becomes the primary screen for the iMac.  I was hoping that both screens would become secondaries for the MacBook Pro.  Does anyone know how I should proceed?  I have tried to connect the Thunderbolt display directly to the MacBook Pro, and the iMac to the Thunderbolt Display via the separate Thunderbolt cable, but there was no difference.  And since the MacBook Pro only has the one Thunderbolt port, I'm not sure how to proceed.

    Yes, eww, the language definitely states two thunderbolt displays, but I can understand the confusion and was siding with how they could make the mistake to think it would work like they want it to. My appologies for not being clear on that point, but I think you make it clear that the language in the ad says nothing about an imac.
    Having said that all the language about TB would suggest that this would be possible. http://www.apple.com/thunderbolt/
    High performance on display.
    Thunderbolt I/O technology provides native support for the Apple Thunderbolt Display and Mini DisplayPort displays. It also supports DisplayPort, DVI, HDMI, and VGA displays through the use of existing adapters. So you can connect your Apple LED Cinema Display or other display, along with multiple high-speed devices, all from a single port.

  • Hi Friends... I'm trying to delete a back-up file on mu TC but I get the message "The operation could not be completed because the item "bands" is in use. I'd like to start the Back from scratch, could help me out with deleting the current file?

    Hi Friends...
    I’m trying to delete a back-up file on mu TC but I get the message “The operation could not be completed because the item “bands” is in use. I’d like to start the Back from scratch, could help me out with deleting the current file?

    Sorry, I am very confused. I asked the following question....
    Is this the only backup file on your Mac, or do you have other backup files and data on the Time Capsule disk?
    The answer that you gave was....
    This is the only one
    Now you are saying that....
    But I have lots of other files on Time Capsule! The back up file is only one of them.
    Can you clarify, please?

  • I know that iCloud backs-up apps and other stuff to your phone incase you want restore from a back-up if you start a New iPhone. My question is if I start a new iPhone (not use the restore from back-up option) and redownload apps like (games, Instagram),

    I know that iCloud backs-up apps and other stuff to your phone incase you want restore from a back-up if you start a New iPhone. My question is if I start a new iPhone (not use the restore from back-up option) and redownload apps like (Games, Instagram), would my pics show up on Instagram and would my Games show it was saved and the acccomplisments will remain from the last place I left out.

    Davin12 wrote:
    I know that iCloud backs-up apps and other stuff to your phone incase you want restore from a back-up if you start a New iPhone. My question is if I start a new iPhone (not use the restore from back-up option) and redownload apps like (Games, Instagram), would my pics show up on Instagram and would my Games show it was saved and the acccomplisments will remain from the last place I left out.
    Icloud or itunes backup, only backs up app data, not the app itself.
    so if you restore as new, then there is no app data on your phone, you start out new...

  • I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use?

    I would like to extend the screen from my circa 2013 27in iMAC with thunderbolt onto my circa late 2006 imac using the DVI port on that iMAC. Is this possible? If not is there another approach I can use? My 2006 iMAC is showing it's age but I figure I can use it as just a monitor just fine. Assuming I can connect the two together.

    That older iMac isn't designed to receive video input through the mini-DVI connection. Only certain newer iMacs are able to be used as displays.
    Your only options are to use something like ScreenRecycler mentioned above.
    ~Lyssa

  • So I  downloaded acrobat XI Standard from the Adobe website, when I go to install it, it says "Adobe XI Pro" at the top left corner. Can anyone shed some light on this for me? I have a volume license for XI Std. so I would like to use the Std. version.

    So I  downloaded acrobat XI Standard from the Adobe website, when I go to install it, it says "Adobe XI Pro" at the top left corner. Can anyone shed some light on this for me? I have a volume license for XI Std. so I would like to use the Std. version.

    login and download your software from the adobe volume licensing website, Customer resources | Adobe Buying Programs

  • I'd like to transfer the photos from iPhone to MacBook Air. My iPhoto used to detect my iPhone automatically, but it doesn't happen anymore. How could I fox this? Thanks for helping!

    I'd like to transfer the photos from iPhone to MacBook Air. My iPhoto used to detect my iPhone automatically, but it doesn't happen anymore. How could I fox this? Thanks for helping!

    Check the iPhoto preferences:
    From the main menu bar:  iPhoto > Preferences > General:
         "Connecting camera opens"  : Set this option to  "iPhoto".
    If that does not help, disconnect your iPhone and reset your iPhone.
    To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.

  • Is there a way to use the photos from iphoto in a collage like the itunes artwork screensaver?

    is there a way to use the photos from iphoto in a collage like the itunes artwork screensaver?

    Yes except i would like it to look like the itunes album artwork screen saver does.  the itunes album artwork screen saver shows a bunch of squares and when one of the boxes changes it spins and goes to the next album artwork
    what you have indicated above is kind of like a slide show where it shows you one of your pictures and zooms out to show you a collage version of another one of your pictures.  i would like it to be formatted similar to the way the itunes screen saver is.
    if you click on itunes artwork on the same menu as shown in your last post, you will see what i am trying to achieve.

  • HT2477 I have a new MacBook Pro which has Windows 7 installed so I have only ever used it as a PC,  I would like to use the apple system but was never shown how to do this and I cannot even work out how to switch it on .  If I just press power iI get wind

    I switch the power on on my MacBook Pro I get windows7
    this is no problem but I love my IPad and would like to use the apple system on my MacBook .
    CAn anyone tell me which keys I press to change from windows 7 to Apple most articles I have read tell you it is easy but not one says "firstly press x then press y and when you see c press v so I no idea how to do it,
    I am well educated but I am 75 so I do not understand the jargon but I am fairly good at using computers and I do like the app system.
    I Would be very pleased if someone can advise me
    best regards
    TOm

    Reboot, hold the option key down as soon as you hear the chime. When the Boot Manager appears select OSX instead of Windows.

  • Can you use the value from a numeric indicator in a numeric control?

    Hi!
         I have to develop a code where I have to find the maximum value of a waveform and draw a line at 50% of the value. So I chose to find the amplitude of say 10 cycles of waveforms and found the maximum value out of the amplitudes. 
    But my real problem is, I have to use the maximum amplitude value that I get from the max. array VI and put it back in program to calculate the 50% value. 
    So is it possible to use the value from a numeric indicator and put it in a numeric control? Like in MATLAB or C, you give the variable a name and use it later to do any computations. Is it possible to do something similar in LabVIEW? 
    Solved!
    Go to Solution.

    Hi!
         Thank you very much for taking some time out. I have been trying to do this since 2 months and I am stuck right where I am.
    The situation is, I have to calculate the amplitude of the irregular waveform for a few trials and then find the maximum amplitude out of the trials and display a line at whatever % of amplitude the user chooses. I tried using property nodes but I am getting Error 1055 for some unknown reason. Then I decided to draw the line using DC offset but it turns out it calculates the amplitude each time and so the line keeps dancing everytime. Now my challenge is to have the amplitude calculated for say, 20 loops and then calculate the max from that. I ran out of ideas so I am posting here. I am using LabVIEW version 8, and I'll upload a few of my attempts. I hope I am not troubling you'll much.
    Attachments:
    amplitude display.vi ‏217 KB
    amplitude display 1.vi ‏148 KB
    Using property node.vi ‏56 KB

  • I want to use the SSD from my new 12 core in my old 4 core but the 4 core doesn't see the SSD.  Flashing file with "?".  What do I need to do?

    I spend a lot of time in a location far from home.  I bought a new MacPro 12 core to use at home and took the old 4 core to the alternate location.  I figured I could just take my hard drives back and forth instead of schlepping a whole MacPro.  The 12 core has a SSD drive to boot from and a 2 TB storage drive for photo files.  It came with Mountain Lion (10.8.2).  At the new location the 4 core does not find the SSD and won't boot.  Grey screen.  If I take the SSD out I can boot with the 2TB drive but it boots in OSX 10.6.8.  I can get by with that workaround, but I'd like to use the SSD if I can because PhotoShop runs a lot faster from it. 
    The SSD does not show up in Finder or Disk Utility when the computer is booted up with the 2TB drive.
    What do I need to do?

    ...or that the installed image on the SSD came from a model-specific version of Mac OS X that shipped with that Mac, and does not have the drivers to support a different model Macintosh, not even an older Mac Pro.
    You can install a new Mac OS X image, such as "Full Retail" 10.6.3 off a DVD in under an hour, and have it up to date and ready for production in only a little more time.
    Or you could clone 10.6.8 onto the SSD (from the other Hard Drive that does boot) in about a quarter hour.

  • New Tab Page - thumbnails are not using the files from cache folder, but they want a connection to their origin website.

    Hi there,
    each time I visit a website, FireFox saves a thumbnail of all these sites for the "New Tab Page". Those thumbnails are cached in the 'thumbnails' Folder . That's so far ok for me.
    The problem is:
    Every time if I use the "New Tab Page" (...after shutdown & reopening the browser and only with 'mousehoover' on any thumbnail) all the thumbnails on that page don't use the cached thumbnails from the local profile folder.
    This means:
    Instead of using the cached thumbnail-files all(!) these thumbnails dials to their origin websites without(!) a mouseclick on any of these thumbnails (...see jpg pictures) !
    I'm using the "Clear history when Firefox closes" with the following options:
    privacy.clearOnShutdown.cache - true
    privacy.clearOnShutdown.cookies - true
    privacy.clearOnShutdown.downloads - false
    privacy.clearOnShutdown.formdata - true
    privacy.clearOnShutdown.history - false(!)
    privacy.clearOnShutdown.offlineApps - false
    privacy.clearOnShutdown.passwords - true
    privacy.clearOnShutdown.sessions - true
    privacy.clearOnShutdown.siteSettings - false(!)
    So, i can't believe that this homedialing of pinned and unpinned thumbnails should be a normal function.
    1. Screenshot: thumbnails in the New Tab Page
    2. Screenshot: the same thumbnails in the Cache Folder "thumbnails" (...also they are there after shutdown of Firefox)
    3. Screenshot: Dialing to the origin websites (...after restart of Firefox)
    The Browser Version is Firefox ESR 31.2.0 and in the installation are no Add-ons, which are - for example - prefetching linked websites.
    I would like to use the "New Tab Page" without 'homedialing', so the question is:
    How can I force the thumbnails to use the cached thumbnail-files ?
    or
    How can i disable the 'loading of content from their origin websites' already on mousehoover ?

    There is a preload pref available that you could try to disable on the <b>about:config</b> page.
    *browser.newtab.preload = false
    You can open the <b>about:config</b> page via the location/address bar.
    You can accept the warning and click "I'll be careful" to continue.
    *http://kb.mozillazine.org/about:config

  • I just purchased a new macbookpro and I would like to put the music from my iphone to my macbook.  I have downloaded from iTunes, however it want to add ALL music to my macbook.

    I just purchased a new macbookpro and I would like to put the music from my iphone to my macbook.  I have downloaded from iTunes, however it want to add ALL music to my macbook.

    When you plug in the iPhone, go to the menu bar and select "Transfer all purchases" to move them to your MacBook Pro.
    If that doesn't work. Go here for a whole list of Apps that can help you.
    I personally like Music Rescue the most.  You can get it here and use the License Key that they give out for FREE now.

  • How do I turn off the alt scroll zoom?  When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut.  I would like to use the alt command for the pen tool instead of zooming into the screen.

    How do I turn off the alt scroll zoom? 
    When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut.  I would like to use the alt command for the pen tool instead of zooming into the screen.

    I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection.  All this does is slow me down since I need to go back and hit those areas again.  The big arrowhead just get's in the way.  The original lasso tool with the thin line and small active point at it's lower left was far better for me.
    I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down.  If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
    I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
    Is there any chance this option could be inlcuded in cursor preferences?  I'd give much thanks, Adobe.

  • Can i use the audio from a theme for a different one?

    Hello,
    I'm creating a DVD for my students. Long story short, we spent 3 weeks in China, I borrowed all their pictures and I'm creating a DVD with all the pictures and videos for them to have as a souvenir.
    I'm using Reflection Black but there is no audio with this theme. I know how to add music to menus or slideshows but I'd like to add the audio from a different file, Revolutions (7.0 theme). Is it possible?
    I've tried, without success, to locate the audio file. I was starting to get quite annoyed so I tried to record the audio using Quicktime but the sound wasn't very nice!
    As you've probably guessed by now, I'm not very good with computers when it comes to technical stuff!
    I really want my DVD to be good! I would really appreciate if you could help me!
    Thanks.
    Mily

    Sorry! Just found where the audio files were!

Maybe you are looking for