I Date TestSTand data type

TestSTAND date data type
I use TestSTAND pop up message to request user to input date in the input string
for example: 10/8/2008  in TestSTAND input string in popup message.
 I assume this is a string
how do I compare this date to today date or any other date.?
Does TestSTAND have a TestSTAND Date data type?

Hi,
No TestStand doesn't have a Date type.
The Date() function returns a string i.e "20/10/2008". Therefore, providing you entered in the same format you could do a StrComp(Locals.DateEntered, Locals.CurrentDate) which if the same would return 0.
But you could get Date() to return the individual Year, Month, Day values then you could do a check on these values. Check out the syntax in the Function Browser.
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

  • TestStand Data Type Enumeration Explained for Array of column_information

    I'm sure it's in the documentation somewhere but I can't find TestStand Data Type Enumeration Explained for Array of column_information.
    data_type 1, 2, 3 ect.
    What do they represent?
    Thnaks,
    -SS
    Attachments:
    TestStand.PNG ‏20 KB

    If you are referring to the Database Connectivity Toolkit, then the definitions for the data types are as follows:
    Item
    Value
    String
    0
    Long (I32)
    1
    Single (SGL)
    2
    Double (DBL)
    3
    Date/Time
    4
    Binary
    5
    Jared A.
    Applications Engineer
    National Instruments

  • Data Acquisition Step Type - Tester Required

    I have just created a Basic Data Acquistion step type for testsand ver 4.0, i require someone who is willing to test out the step type and just give me feedback on any relevant bugs , look and feel etc. I have attached a few screen shots of the demo i have created.
    Attachments:
    Front Panel.jpg ‏622 KB
    demo.jpg ‏2759 KB
    Dialog.jpg ‏647 KB

    Data Acquisition usually refers to a DAQ board from NI so I think what you are looking for is a generic NI-VISA step type and a specific RS-232 step type. I have a NI-VISA step type that was originally written with LabVIEW 6.1 and for use with TestStand 2. I've atached that below. I don't have the .ini file handy and don't have time to recreate it but from the code, you should be able to see what needs to be added to the step properties. The basic step is a modified Pass/Fail Step.
    It's not that difficult to create your own custom steps. I've done a lot and it only takes a little while longer than doing a code module in LabVIEW or CVI. The extra time is in creating the edit step.
    I've got an RS-232 step type but part of it is product specific so it is proprietary and I can't post that. Look at the VISA example and the other examples of custom step types that are on the developer zone and see how far you get.
    Attachments:
    VISA IO.zip ‏188 KB

  • How can we give the Data Format (File Type ) in Runtime

    Hi all,
    How can we give the Data Format (File Type ) in Runtime for the following method,
    cl_gui_frontend_services=>gui_download.
    Thanks in advance
    Sri

    There is a filetype parameter which you can set
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
    *    BIN_FILESIZE              =
        filename                  =
    *    FILETYPE                  = 'ASC'
    *    APPEND                    = SPACE
    *    WRITE_FIELD_SEPARATOR     = SPACE
    *    HEADER                    = '00'
    *    TRUNC_TRAILING_BLANKS     = SPACE
    *    WRITE_LF                  = 'X'
    *    COL_SELECT                = SPACE
    *    COL_SELECT_MASK           = SPACE
    *    DAT_MODE                  = SPACE
    *    CONFIRM_OVERWRITE         = SPACE
    *    NO_AUTH_CHECK             = SPACE
    *    CODEPAGE                  = SPACE
    *    IGNORE_CERR               = ABAP_TRUE
    *    REPLACEMENT               = '#'
    *    WRITE_BOM                 = SPACE
    *    TRUNC_TRAILING_BLANKS_EOL = 'X'
    *  IMPORTING
    *    FILELENGTH                =
      changing
        data_tab                  =
    *  EXCEPTIONS
    *    FILE_WRITE_ERROR          = 1
    *    NO_BATCH                  = 2
    *    GUI_REFUSE_FILETRANSFER   = 3
    *    INVALID_TYPE              = 4
    *    NO_AUTHORITY              = 5
    *    UNKNOWN_ERROR             = 6
    *    HEADER_NOT_ALLOWED        = 7
    *    SEPARATOR_NOT_ALLOWED     = 8
    *    FILESIZE_NOT_ALLOWED      = 9
    *    HEADER_TOO_LONG           = 10
    *    DP_ERROR_CREATE           = 11
    *    DP_ERROR_SEND             = 12
    *    DP_ERROR_WRITE            = 13
    *    UNKNOWN_DP_ERROR          = 14
    *    ACCESS_DENIED             = 15
    *    DP_OUT_OF_MEMORY          = 16
    *    DISK_FULL                 = 17
    *    DP_TIMEOUT                = 18
    *    FILE_NOT_FOUND            = 19
    *    DATAPROVIDER_EXCEPTION    = 20
    *    CONTROL_FLUSH_ERROR       = 21
    *    NOT_SUPPORTED_BY_GUI      = 22
    *    ERROR_NO_GUI              = 23
    *    others                    = 24

  • Unable to retrieve data from XML Type

    Hi All,
    I have table which has Column of type XMLType
    XML Data is loaded in the table.
    But when iam trying to extract not able to retrieve the data
    Following is the select query i am using
    SELECT CL.XMLDATA.EXTRACT('/ServiceType/entityName/text()').getStringVal() "entityname" FROM CL_DATA_SERVICE_TEMPLATE CL;
    Any help / pointer will help me a lot... Thanks in advance
    Sample XML File:
    <?xml version="1.0" encoding="WINDOWS-1252"?>
    <ServiceType xmlns="http://www.bmiasia.com/tBos/service_1_0">
    <entityName>bmiasia.app.irb.servicetemplate12</entityName>
    <systemVersion>4</systemVersion>
    <displayName>
    <bundle />
    <key>AG-EVC</key>
    </displayName>
    <description>AG-EVC GROUP: AG-EVC</description>
    <category entityName="bmiasia.app.service.category.ServiceRootCategory.AG_-_EVC_Services">
    <operation>ADD</operation>
    </category>
    <entityMetaInfo name="bmiasia.app.irb.servicetemplate12.NC_PRODUCT_ID">
    <type entityName="1"></type>
    </entityMetaInfo>
    <entityMetaInfo name="bmiasia.app.irb.servicetemplate12.NC_GL_PRODUCT_CODE">
    <type entityName="2"></type>
    </entityMetaInfo>
    <entityMetaInfo name="bmiasia.app.irb.servicetemplate12.NC_GL_PROFIT_CENTRE">
    <type entityName="3"></type>
    </entityMetaInfo>
    <entityMetaInfo name="bmiasia.app.irb.servicetemplate12.NC_SERVICE_CODE">
    <type entityName="4"></type>
    </entityMetaInfo>
    <entityMetaInfo name="bmiasia.app.irb.servicetemplate12.RSP_EU_CUST_REF">
    <type entityName="5"></type>
    </entityMetaInfo>
    <entityMetaInfo name="irbPkClass">
    <type entityName="com.convergys.geneva.j2ee.product.ProductPK"></type>
    </entityMetaInfo>
    <entityMetaInfo name="irbId">
    <type entityName="12"></type>
    </entityMetaInfo>
    <extensionProperty name="hasAddress" value="true"></extensionProperty>
    <parent>
    <itemkey>AllServiceTemplate</itemkey>
    <name>AllServiceTemplate</name>
    <targetEntity entityName="bmiasia.app.service.template.AllServiceTemplate"></targetEntity>
    <number>0</number>
    </parent>
    <group>NORMAL</group>
    <siu>
    <itemkey>L2_OPTION</itemkey>
    <operation>ADD</operation>
    <name>L2_OPTION</name>
    <required>true</required>
    <source>INTERNAL</source>
    <displayName>
    <key>L2 Option</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>L3_OPTION</itemkey>
    <operation>ADD</operation>
    <name>L3_OPTION</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>L3 Option</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>QPEVPL_SERVICE_ID</itemkey>
    <operation>ADD</operation>
    <name>QPEVPL_SERVICE_ID</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>QP EVLP Service ID</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>QPEVPL_LAG_ID</itemkey>
    <operation>ADD</operation>
    <name>QPEVPL_LAG_ID</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>QP EVLP LAG ID</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>CO_NAME</itemkey>
    <operation>ADD</operation>
    <name>CO_NAME</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Aggregation Layer / Co Layer</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>INSTALL_SALUTAION</itemkey>
    <operation>ADD</operation>
    <name>INSTALL_SALUTAION</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Installation Salutation</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>INSTALL_LASTNAME</itemkey>
    <operation>ADD</operation>
    <name>INSTALL_LASTNAME</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Installlation Last Name</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>INSTALL_FIRSTNAME</itemkey>
    <operation>ADD</operation>
    <name>INSTALL_FIRSTNAME</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Installation First Name</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>INSTALL_TELEPHONE</itemkey>
    <operation>ADD</operation>
    <name>INSTALL_TELEPHONE</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Installation Telephone</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>INSTALL_MOBILE</itemkey>
    <operation>ADD</operation>
    <name>INSTALL_MOBILE</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Installation Mobile</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>INSTALL_EMAIL</itemkey>
    <operation>ADD</operation>
    <name>INSTALL_EMAIL</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Installlation Email</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>INSTALL_NOTIFICATION</itemkey>
    <operation>ADD</operation>
    <name>INSTALL_NOTIFICATION</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Installation Notification</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>TECHNICAL_SALUTAION</itemkey>
    <operation>ADD</operation>
    <name>TECHNICAL_SALUTAION</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Operational / Technical Salutation</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>TECHNICAL_LASTNAME</itemkey>
    <operation>ADD</operation>
    <name>TECHNICAL_LASTNAME</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Operational / Technical Last Name</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>TECHNICAL_FIRSTNAME</itemkey>
    <operation>ADD</operation>
    <name>TECHNICAL_FIRSTNAME</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Operational / Technical First Name</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>TECHNICAL_TELEPHONE</itemkey>
    <operation>ADD</operation>
    <name>TECHNICAL_TELEPHONE</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Operational / Technical Telephone</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>TECHNICAL_MOBILE</itemkey>
    <operation>ADD</operation>
    <name>TECHNICAL_MOBILE</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Operational / Technical Mobile</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>TECHNICAL_EMAIL</itemkey>
    <operation>ADD</operation>
    <name>TECHNICAL_EMAIL</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Operational / Technical Email</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>TECHNICAL_NOTIFICATION</itemkey>
    <operation>ADD</operation>
    <name>TECHNICAL_NOTIFICATION</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Operational / Technical Notification</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>SERVICE_ACTIVATION_PERIOD</itemkey>
    <operation>ADD</operation>
    <name>SERVICE_ACTIVATION_PERIOD</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Service Activation Period</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>REJECT_CODE</itemkey>
    <operation>ADD</operation>
    <name>REJECT_CODE</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Rejection Reason</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>APPLICATION_ACCEPTED</itemkey>
    <operation>ADD</operation>
    <name>APPLICATION_ACCEPTED</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Application Accepted</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.BooleanCheckSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>APPLICATION_REJECTED</itemkey>
    <operation>ADD</operation>
    <name>APPLICATION_REJECTED</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Application Rejected</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.BooleanCheckSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>APPROVAL_CODE</itemkey>
    <operation>ADD</operation>
    <name>APPROVAL_CODE</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Approval Code</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>PROCESSED_BY</itemkey>
    <operation>ADD</operation>
    <name>PROCESSED_BY</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Processed By</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>ACTUAL_RFS_DATE</itemkey>
    <operation>ADD</operation>
    <name>ACTUAL_RFS_DATE</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Actual RFS Date</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.DateSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>DISCLAIMER</itemkey>
    <operation>ADD</operation>
    <name>DISCLAIMER</name>
    <required>false</required>
    <source>INTERNAL</source>
    <displayName>
    <key>Disclaimer</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>NC_PRODUCT_ID</itemkey>
    <operation>ADD</operation>
    <name>NC_PRODUCT_ID</name>
    <required>false</required>
    <source>EXTERNAL</source>
    <displayName>
    <key>NC Product ID</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>NC_GL_PRODUCT_CODE</itemkey>
    <operation>ADD</operation>
    <name>NC_GL_PRODUCT_CODE</name>
    <required>false</required>
    <source>EXTERNAL</source>
    <displayName>
    <key>NC GL Product Code</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>NC_GL_PROFIT_CENTRE</itemkey>
    <operation>ADD</operation>
    <name>NC_GL_PROFIT_CENTRE</name>
    <required>false</required>
    <source>EXTERNAL</source>
    <displayName>
    <key>NC GL Profit Centre</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>NC_SERVICE_CODE</itemkey>
    <operation>ADD</operation>
    <name>NC_SERVICE_CODE</name>
    <required>false</required>
    <source>EXTERNAL</source>
    <displayName>
    <key>EUC ID</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.common.StringSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAttribute"></mapping>
    <scope>PRODUCT</scope>
    </siu>
    <siu>
    <itemkey>bmiasia.app.irb.servicetemplate54</itemkey>
    <operation>ADD</operation>
    <name>bmiasia.app.irb.servicetemplate54</name>
    <required>false</required>
    <source>INTERNAL</source>
    <equalsProvider>bmiasia.app.service.spi.AddSvcSIUEqualsProvider</equalsProvider>
    <displayName>
    <key>CIR Per 250Mbps CoS A</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.AdditionalServiceSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAdditionalService"></mapping>
    <scope>SERVICE</scope>
    <outSvcAttr>true</outSvcAttr>
    </siu>
    <siu>
    <itemkey>bmiasia.app.irb.servicetemplate55</itemkey>
    <operation>ADD</operation>
    <name>bmiasia.app.irb.servicetemplate55</name>
    <required>false</required>
    <source>INTERNAL</source>
    <equalsProvider>bmiasia.app.service.spi.AddSvcSIUEqualsProvider</equalsProvider>
    <displayName>
    <key>CIR Per 250Mbps CoS B</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.AdditionalServiceSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAdditionalService"></mapping>
    <scope>SERVICE</scope>
    <outSvcAttr>true</outSvcAttr>
    </siu>
    <siu>
    <itemkey>bmiasia.app.irb.servicetemplate56</itemkey>
    <operation>ADD</operation>
    <name>bmiasia.app.irb.servicetemplate56</name>
    <required>false</required>
    <source>INTERNAL</source>
    <equalsProvider>bmiasia.app.service.spi.AddSvcSIUEqualsProvider</equalsProvider>
    <displayName>
    <key>CIR Per 250Mbps CoS C</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.AdditionalServiceSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAdditionalService"></mapping>
    <scope>SERVICE</scope>
    <outSvcAttr>true</outSvcAttr>
    </siu>
    <siu>
    <itemkey>bmiasia.app.irb.servicetemplate57</itemkey>
    <operation>ADD</operation>
    <name>bmiasia.app.irb.servicetemplate57</name>
    <required>false</required>
    <source>INTERNAL</source>
    <equalsProvider>bmiasia.app.service.spi.AddSvcSIUEqualsProvider</equalsProvider>
    <displayName>
    <key>CIR Per 250Mbps CoS D</key>
    </displayName>
    <type entityName="bmiasia.app.siulib.siu.AdditionalServiceSIU"></type>
    <mapping entityName="bmiasia.app.service.oo.ServiceAndAdditionalService"></mapping>
    <scope>SERVICE</scope>
    <outSvcAttr>true</outSvcAttr>
    </siu>
    <defaultWorkflowInfo>
    <workflow entityName="bmiasia.app.irb.servicetemplate12_Workflow"></workflow>
    <cancelFlow entityName="bmiasia.app.irb.servicetemplate12_CancelFlow"></cancelFlow>
    </defaultWorkflowInfo>
    <source>EXTERNAL</source>
    <additionalServices entityName="bmiasia.app.irb.servicetemplate54">
    <operation>ADD</operation>
    <name>CIR Per 250Mbps CoS A</name>
    </additionalServices>
    <additionalServices entityName="bmiasia.app.irb.servicetemplate55">
    <operation>ADD</operation>
    <name>CIR Per 250Mbps CoS B</name>
    </additionalServices>
    <additionalServices entityName="bmiasia.app.irb.servicetemplate56">
    <operation>ADD</operation>
    <name>CIR Per 250Mbps CoS C</name>
    </additionalServices>
    <additionalServices entityName="bmiasia.app.irb.servicetemplate57">
    <operation>ADD</operation>
    <name>CIR Per 250Mbps CoS D</name>
    </additionalServices>
    <defaultWorkflowDefinition>
    <installSoEntityName>bmiasia.app.template.serviceorder.Installservicetemplate12SO</installSoEntityName>
    <changeSoEntityName>bmiasia.app.template.serviceorder.Modifyservicetemplate12SO</changeSoEntityName>
    <removeSoEntityName>bmiasia.app.template.serviceorder.Removeservicetemplate12SO</removeSoEntityName>
    <workflow>
    <entityName>bmiasia.app.irb.servicetemplate12_Workflow</entityName>
    </workflow>
    <cancelFlow>
    <entityName>bmiasia.app.irb.servicetemplate12_CancelFlow</entityName>
    </cancelFlow>
    </defaultWorkflowDefinition>
    </ServiceType>

    Hi !!
    Now when iam extracting the data for the above xml, using the below query
    SELECT extractvalue(VALUE(p),'/itemkey/*') Name, extractvalue(VALUE(p),'/required/*') Required FROM CL_DATA_SERVICE_TEMPLATE w, TABLE(XMLSEQUENCE(EXTRACT(xmldata,'/ServiceType/siu','xmlns="http://www.bmiasia.com/tBos/service_1_0"'))) p
    I am expecting the output to be something like below
    Name | Required
    L2_OPTION | true
    L3_OPTION | false
    but iam getting the required number of rows but all blank
    Lets take it as O/P should be 20 Rows, then iam getting 20 Rows.... But all are blank
    What is wrong in the query ?
    Can some one point it out

  • Settings for costing data in order types for plant maintenance

    i want to know the purpose of settings for costing data in order types for plant maintenance. do we need to do it for sure i mean are those settings mandatory to analyze the costs on work order

    Yes you need to maintain those settings, as the plant maintenance orders are also considered as cost objects and in order for you to post any cost, you need to have a cost object.  Unless you maintain these settings, the cost you posted cannot be settled to a cost center.
    Assign points as a way to say thanks.
    Madhav Nanduri

  • Plz help upgrade issue moving data from char type structure to non char typ

    Hi Experts
    plz help its very urgent
    Data :workout(5000) .
    FIELD-SYMBOLS : <FS_WORKOUT> TYPE ANY.  
    workout = '         u' .
    ASSIGN WORKOUT TO <FS_WORKOUT> CASTING TYPE C .
                      BAPISDITM = <FS_WORKOUT>.
    i am getting dump after BAPISDITM = <FS_WORKOUT>.
    i think i am getting the dump bcoz i am moving character type structure to non character type structure but i think with field symbols we can remove this issue thats y i used it but its not working plz help me
    its very urgent
    *dump is :*
    Short text
        Data objects in Unicode programs cannot be converted.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "ZSDR0009" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    How to correct the error
        Use only convertible operands "dst" and "src" for the statement
           "MOVE src TO dst"
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "UC_OBJECTS_NOT_CONVERTIBLE" " "
        "ZSDR0009" or "ZSDR0009_I02"
        "USER_COMMAND"
    thanx in advance

    i got d solution in this thread
    Hi all,
    data: gv_line(6000) type c.
    Bvbapkom = gv_line.
    But i am getting the Error like : gv_line and Bvbapkom are not mutually convertable.
    Note: Bvbapkom is a Structure
    How do i solve this ?
    Mahesh
    KR  
    Posts: 210
    Registered: 11/24/06
    Forum Points: 0 
      Re: gv_line and Bvbapkom are not mutually convertable.  
    Posted: Nov 30, 2007 8:40 AM    in response to: KR         Reply 
    Hi ,
    i got the solution
    ANSWER:
    Field-symbols: <X_Bvbapkom> type x,
    <X_gv_line> type x.
    Assign: Bvbapkom to <X_Bvbapkom> casting,
    gv_line to <X_gv_line> casting.
    <X_Bvbapkom> = <X_gv_line>.
    Nasaka Ramakris...  
    Posts: 4
    Registered: 1/19/08
    Forum Points: 20 
      Re: gv_line and Bvbapkom are not mutually convertable.   
    Posted: Jan 19, 2008 7:42 AM    in response to: KR         Reply 
    Hi Check this answer.
    ANSWER:
    Field-symbols: <X_Bvbapkom> type x,
    <X_gv_line> type x.
    Assign: Bvbapkom to <X_Bvbapkom> casting,
    gv_line to <X_gv_line> casting.
    <X_Bvbapkom> = <X_gv_line>.

  • Control data for storage type  is missing Message no. L3006

    Dear Mates
    i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
    Control data for storage type  is missing
    Message no. L3006
    i have explored every thread regarding the same issue and also implemented some measures like
    -> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
    -> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
    but still i am getting the same message in LT03
    can you please help me out on this.

    Please take a look at the following links and see if they will help at all.
    Error on creating a TO - Control data for storage type  is missing
    "control data for storage type is missing"
    Kind Regards,
    Jason

  • "control data for storage type is missing"

    Hi Guys
    I am trying to create a goods receipt for an inbound delivery.
    I created the inbound delivery VL31N - sucessfully
    But when trying to create a putaway LT0F - error
    control data for storage type is missing. msg no. L3006
    Do i maiantain this control data for storage type in the Material master?
    is there anything Im doing wrong?
    Can someone help please.
    Thanks in advance for the help.
    Ahmad Yahya

    Hi,
    Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
    Regards,
    Prabu

  • PO date / Purchase order type

    Hello,
    When creating a standard order in SAP with VA01, we can fill in the fields "PO date" (the date when the customer send the PO) and "Purchase Order Type" (the source of the PO - by Email, by phone, by fax)...The report VA05 doesn't show those fields...Is it an other report showing these data that I can use ?
    Many thanks.
    Gabriela.

    Hi Gabriela
    You can Check in VA05  , so kindly check the document type feild & PO date feild . If you cant see then check in VA05n 
    Regards
    Srinath

  • Cannot create a date in cfformitem type="script"

    I tried to create date variables using "new Date" in
    cfformitem type="script" and got an error about the "new" reserver
    word. Therefore, I removed the "new" and tested the script. It
    worked with the wrong result because the todayDate and selectedDate
    in the CheckDate2 were the same. By some reason, it ignored all the
    input parameters. However, everything worked fine in the
    cfsavecontent.
    Anyone has idea? Thanks in advance.
    Here is the script:
    <cfsavecontent variable="CheckDate1">
    var todayDate = new Date(myForm.todayYear,
    myForm.todayMonth, myForm.todayDate, 0, 0, 0, 0);
    var selectedDate = new Date(
    myForm.select_date1.substr(6, 4),
    myForm.select_date1.substr(0, 2) - 1,
    myForm.select_date1.substr(3, 2),
    0, 0, 0, 0
    alert("Today's Date in the cfsavecontent:\n" + todayDate +
    "\n\n" +
    "Seleced Date in the cfsavecontent:\n" + selectedDate);
    if (selectedDate > todayDate)
    alert("You cannot select a date greater than today's date");
    else
    alert("You are ok.");
    </cfsavecontent>
    <cfform name="myForm" format="Flash">
    <cfformitem type="script">
    function CheckDate2():Void
    var todayDate = Date(myForm.todayYear, myForm.todayMonth,
    myForm.todayDate, 0, 0, 0, 0);
    var selectedDate = Date(
    myForm.select_date2.substr(6, 4),
    myForm.select_date2.substr(0, 2) - 1,
    myForm.select_date2.substr(3, 2),
    0, 0, 0, 0
    alert("Today's Date in the cfformitem:\n" + todayDate +
    "\n\n" +
    "Seleced Date in the cfformitem:\n" + selectedDate);
    if (selectedDate > todayDate)
    alert("You cannot select a date greater than today's date");
    else
    alert("You are ok.");
    </cfformitem>
    <CFCALENDAR name="select_date1" height="150" width="310"
    onchange="#CheckDate1#">
    <CFCALENDAR name="select_date2" height="150" width="310"
    onchange="CheckDate2()">
    <cfinput type="text" name="todayYear"
    value="#DateFormat(Now(), 'yyyy')#" label="todayYear">
    <cfinput type="text" name="todayMonth"
    value="#DateFormat(Now(), 'm') - 1#" label="todayMonth">
    <cfinput type="text" name="todayDate"
    value="#DateFormat(Now(), 'd')#" label="todayDate">
    </cfform>

    > I am using CF 7.0.2.
    Good. That's that sorted.
    > The problem is the cfformitem does not allow
    “new” or other reserved words
    As I'm sure you're already aware, it is so by design. For
    security reasons, the Coldfusion Flash form compiler does not allow
    the creation of objects in an event handler. It therefore prohibits
    the use of the "new" keyword in an event handler script. In fact,
    It may not even allow its occurrence in a comment!
    > When I put the function in a .as file and include it in the
    CFM file or use
    > cfsavecontent to store the as function, the CF compiler
    accepts the reserved
    > word “new” and the script works fine.
    It's a hack, one design gremlin that got away. In programming
    as in nature there are (un)lucky accidents.
    > the Date constructor ignores the input parameters and
    creates the
    > current system date in the date objects.
    We should be glad it even gets that far. Without the "new"
    keyword, it should not be possible to create a new Date object. The
    flash compiler encounters a familiar constructor pattern, and
    simply makes do by creating the default date of today, right down
    to hours, minutes and seconds. Your arguments are ignored.
    Thus, the following will all return the same result, namely,
    the date of today.
    var todayDate = Date(myForm.todayYear, myForm.todayMonth,
    myForm.todayDate, 0, 0, 0, 0);
    var todayDate = Date(myForm.todayYear, myForm.todayMonth,
    myForm.todayDate);
    var todayDate = Date(0);
    var todayDate = Date(100000000000);
    var todayDate = Date();
    Even then, the todayDate variable doesn't behave properly
    like a Date object. For example, function calls like
    todayDate.getDate() fail. Comparing dates also fails. That is
    possibly because the machine cannot cast the todayDate variable.
    However, here is an approach that does what you want.
    <cfformitem type="script">
    function CheckDate2() {
    var todayDate:Date = Date();
    var todayDateInMillis =
    Date.UTC(myForm.todayYear,myForm.todayMonth,myForm.todayDate);
    var selected_date:Date = select_date2.selectedDate;
    var selected_dateInMillis = selected_date.getTime();
    alert("Today's Date from cfformitem tag :\n" + todayDate +
    "\n\n" + "Selected Date from cfformitem tag:\n" + selected_date);
    if (selected_dateInMillis > todayDateInMillis) alert("You
    cannot select a date greater than today's date");
    else
    alert("You are ok.");
    </cfformitem>

  • Issue loading Meta Data for IDoc Type WPUKSR01 in XI Integration Repository

    Hi,
    I want to load the Meta Data for IDoc Type WPUKSR01 in XI Integration Repository out of BI. Unfortunately, this IDoc is not available in the IDoc List. I checked in BI and the IDoc Type is available in WE60 and WE30. Also, I can load the Meta Data for the Idoc in XI ABAP (IDX2).
    Can someone tell me why the IDoc doesn't show up in XI Integration Repository Import Object List?
    Thanks in advance.
    Best Regards.
    Alex

    Hi Aamir,
    The Idoc is released since Release 30A. I also tried to load the IDoc Meta Data from ERP with the same result: it does not show up in the list.
    Thanks anyway.
    Alex

  • Conversion of a data object of type "C" to type "l" is not supported

    Experts:
    i have below code in my FM; defined as remote-enabled module.
    when i execute i get the error analysis as:
      You attempted to move one data object to another.
    This is not possible here because the conversion of a data object
      of type "C" to type "l" is not supported.
    This at the line    move <FS2> TO <wwa_mdm_name_value_pair>-VALUE .
    what are the steps to debug this?  Thanks!
      DATA: tt_mdm_name_value_pair_table TYPE mdm_name_value_pair_table.
      FIELD-SYMBOLS : <wwa_mdm_name_value_pair> LIKE LINE OF tt_mdm_name_value_pair_table.
      FIELD-SYMBOLS <FS1> TYPE ANY.
      FIELD-SYMBOLS <FS2> TYPE any.
      data:st_mdm_name_value_pair type mdm_name_value_pair.
      assign  st_mdm_name_value_pair to <wwa_mdm_name_value_pair>.
    assign st_mdm_name_value_pair-code to <FS1>.
    assign st_mdm_name_value_pair-value to <FS2>.
      clear wa_ZSTRESULT.
      loop at T_UPDATE into wa_ZSTRESULT.
        assign wa_ZSTRESULT-field to <FS1>.
        <wwa_mdm_name_value_pair>-CODE = <FS1>.
        assign wa_ZSTRESULT-VALUE to <FS2>.
        move <FS2> TO <wwa_mdm_name_value_pair>-VALUE .
        append <wwa_mdm_name_value_pair> to tt_mdm_name_value_pair_table.
      endloop.

    resolved using GET REFERENCE.. code looks as below:  Thanks!
      DATA: tt_mdm_name_value_pair_table TYPE mdm_name_value_pair_table.
      FIELD-SYMBOLS : <wwa_mdm_name_value_pair> TYPE LINE OF mdm_name_value_pair_table.
      FIELD-SYMBOLS <FS1> TYPE ANY.
      FIELD-SYMBOLS <FS2> TYPE DATA.
      TYPES t_dref TYPE REF TO DATA.
      DATA dref TYPE REF TO DATA.
      DATA: TT_UPDATE TYPE ZTYRESULT.
      FIELD-SYMBOLS : <WA_UPDATE> LIKE LINE OF TT_UPDATE.
      data:   st_mdm_name_value_pair type mdm_name_value_pair.
      assign  st_mdm_name_value_pair to <wwa_mdm_name_value_pair>.
    assign st_mdm_name_value_pair-code to <FS1>.
    assign st_mdm_name_value_pair-value to <FS2>.
      clear wa_ZSTRESULT.
      TT_UPDATE = T_UPDATE.
      loop at TT_UPDATE assigning <WA_UPDATE>.
        assign <WA_UPDATE>-FIELD to <FS1>.
        <wwa_mdm_name_value_pair>-CODE = <FS1>.
        assign <WA_UPDATE>-VALUE  to  <FS2>.
        GET REFERENCE OF <WA_UPDATE>-VALUE INTO dref.
    *    MOVE dref TO <wwa_mdm_name_value_pair>-VALUE.
        <wwa_mdm_name_value_pair>-VALUE = dref.
        append <wwa_mdm_name_value_pair> to tt_mdm_name_value_pair_table.
      endloop.

  • BPM Process Data Object of type Business Objects

    I am using JDeveloper11.1.1.5 and using BPM Project. I have created a business object of type Quote and I want create a Process data object of type Quote. But I don't find 'Browse more types' button on Create data object wizard. I am stuck at this place. Is there any work around or do I need to revert to older version of Jdeveloper.
    Regards
    Sunil Mandrawadkar

    Have you tried with following forum.I think you can find answer quickly from that.
    Business Process Management Suite

  • Dynamically built query on execution How to save the data in Object Type

    Hi,
    In pl/sql I am building and executing a query dynamically. How can I stored the output of the query in object type. I have defined the following object type and need to store the
    output of the query in it. Here is the Object Type I have
    CREATE OR REPLACE TYPE DEMO.FIRST_RECORDTYPE AS OBJECT(
    pkid NUMBER,
    pkname VARCHAR2(100);
    pkcity VARCHAR2(100);
    pkcounty VARCHAR2(100)
    CREATE OR REPLACE TYPE DEMO.FIRST_RECORDTYPETAB AS TABLE OF FIRST_RECORDTYPE;Here is the query generated at runtime and is inside a LOOP
    --I initialize my Object Type*
    data := new FIRST_RECORDTYPETAB();
    FOR some_cursor IN c_get_ids (username)
    LOOP
    x_context_count := x_context_count + 1;
    -- here I build the query dynamically and the same query generated is
    sql_query := 'SELECT pkid as pid ,pkname as pname,pkcity as pcity, pkcounty as pcounty FROM cities WHERE passed = <this value changes on every iteration of the cursor>'
    -- and now I need to execute the above query but need to store the output
    EXECUTE IMMEDIATE sql_query
    INTO *<I need to save the out put in the Type I defined>*
    END LOOP;
    How can I save the output of the dynamically built query in the Object Type. As I am looping so the type can have several records.
    Any help is appreciated.
    Thanks

    hai ,
    solution for Dynamically built query on execution How to save the data in Object Type.
    Step 1:(Object creation)
    SQL> ED
    Wrote file afiedt.buf
    1 Create Or Replace Type contract_details As Object(
    2 contract_number Varchar2(15),
    3 contrcat_branch Varchar2(15)
    4* );
    SQL> /
    Type created.
    Step 2:(table creation with object)
    SQL> Create Table contract_dtls(Id Number,contract contract_details)
    2 /
    Table created.
    Step 3:(execution Of procedure to insert the dynamic ouput into object types):
    Declare
    LV_V_SQL_QUERY Varchar2(4000);
    LV_N_CURSOR Integer;
    LV_N_EXECUTE_CURSOR Integer;
    LV_V_CONTRACT_BR Varchar2(15) := 'TNW'; -- change the branch name by making this as input parameter for a procedure or function
    OV_V_CONTRACT_NUMBER Varchar2(15);
    LV_V_CONTRACT_BRANCH Varchar2(15);
    Begin
    LV_V_SQL_QUERY := 'SELECT CONTRACT_NUMBER,CONTRACT_BRANCH FROM CC_CONTRACT_MASTER WHERE CONTRACT_BRANCH = '''||LV_V_CONTRACT_BR||'''';
    LV_N_CURSOR := Dbms_Sql.open_Cursor;
    Dbms_Sql.parse(LV_N_CURSOR,LV_V_SQL_QUERY,2);
    Dbms_Sql.define_Column(LV_N_CURSOR,1,OV_V_CONTRACT_NUMBER,15);
    Dbms_Sql.define_Column(LV_N_CURSOR,2,LV_V_CONTRACT_BRANCH,15);
    LV_N_EXECUTE_CURSOR := Dbms_Sql.Execute(LV_N_CURSOR);
    Loop
    Exit When Dbms_Sql.fetch_Rows (LV_N_CURSOR)= 0;
    Dbms_Sql.column_Value(LV_N_CURSOR,1,OV_V_CONTRACT_NUMBER);
    Dbms_Sql.column_Value(LV_N_CURSOR,2,LV_V_CONTRACT_BRANCH);
    Dbms_Output.put_Line('CONTRACT_BRANCH--'||LV_V_CONTRACT_BRANCH);
    Dbms_Output.put_Line('CONTRACT_NUMBER--'||OV_V_CONTRACT_NUMBER);
    INSERT INTO contract_dtls VALUES(1,CONTRACT_DETAILS(OV_V_CONTRACT_NUMBER,LV_V_CONTRACT_BRANCH));
    End Loop;
    Dbms_Sql.close_Cursor (LV_N_CURSOR);
    COMMIT;
    Exception
    When Others Then
    Dbms_Output.put_Line('SQLERRM--'||Sqlerrm);
    Dbms_Output.put_Line('SQLERRM--'||Sqlcode);
    End;
    step 4:check the values are inseted in the object included table
    SELECT * FROM contract_dtls;
    Regards
    C.karukkuvel

Maybe you are looking for

  • Archive Link & Cost Center

    Hi all, I have attached document to cost center through Archive Link tr.code OAWD succesfully. but i can't see any document attach in cost center(Tr. Code KS02).where to find this attach doucment throgh Archive Link with cost center. i allready check

  • Not hard coding the iexplorer path

    Hi I was looking around and saw this piece of code posted by Cotton.m: public class IETest{   public final static String browserPath ="C:\\Program Files\\Internet Explorer\\iexplore.exe";   public static void main(String args[])throws Exception{    

  • DMS integration with QM Notification

    Hello, I have configured DMS screen in QM customizing and have created a DIR that I linked to a Quality Notification and attached an original file.  My issue is that when I go to the Notification and select the Documents tab, the DMS documents do not

  • Sub-project rollup to Master project-How to achieve this??

    Dear Dina, In capital project: There is 1 master project, under master project there are 10 sub-projects ,how to rollup the sub-projects information into master project [client wants to see the all sub-project information at master project level only

  • Windows Client (delegated)

    Hi, My client has one windows user who they want to access the ical server. I have configured sunbird which is seeing the users own server cal, but they cannot see the calendars they have been delegated too. Is this possible for a windows client? Tha