I deleted my review quiz button!

I deleted my review quiz button on accident...and now i can't get it back. It is not giving me an option to undue. I want the learners to be able to review their incorrect answers after taking the quiz. How can I get it back? Can i add my own?

Check Quiz Preferences, Settings, and check 'Allow users to Review Quiz'. It is an embedded object with a very specific functionality, you will never be able to add a custom button that does the same.

Similar Messages

Getting back the review quiz-button

Hello,
Somehow I deleted the review quiz-button that is shown in the Quiz result-slide. How would I get it back? It happened a while back so Ctrl+Z is long gone .
As I can't add any new buttons in a question slide, I can't work it out that way either.
Any ideas?
Kind regards,
Patrik

Check if the option is enabled in Quiz settings:

Review Quiz button does not navigate to the first quiz question..

Hi,
so I have created an interactive software simulation guide for users of my organisation. At the end of this guide there is a quiz (multiple choice, true or false questions) with 15 slides. At the end of the quiz the results screen is displayed with the "Review Quiz" button. Clicking this navigates the user to slide 72/245 rather than the beginning of the quiz, the first question.
How can this be fixed?!
Many thanks,
Achello

You have an interactive object somewhere on that slide that is scored to be added to the quiz.
Open the Advanced Interaction dialog (F9) and look for the object there. Remove the score.

Captivate 3 - Continue and Review Quiz Button Not Working

I have just published a SCORM course in Captivate. It works perfectly fine once I've uploaded it into the LMS except one small part. I've set up the quiz so each learner is required to pass the quiz in order to complete the module. At the end of the quiz, the results page appears with two buttons (Continue and Review Quiz). Those buttons don't work.
I set up the quiz so that learners have 2 attempts to successfully complete it. If they're unsuccesful, the continue button should direct them to the beginning of the quiz so they could retake it. If they have successfully complete, the continue button should take them to the next slide. That's not working. For some reason, the continue button only works if the learner has failed the quiz. The Review Quiz button also doesn't work. I did select the option allowing them to do so. Can someone please help?

Hi there
Please send me a private E-Mail message to rstone75 (at) kc (dot) rr (dot) com and advise of the exact file name of the file you are linking to.
I'll send you back a file that you can use to test and see if the link works.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Can I control when the Review Quiz button appears?

The project I'm working on uses the e-mail results function to send scores to a database. After sending scores, the user needs to be able to review their answers. The problem is I don't see a way to make the Review button's appearance dependent on another action (user clicking send e-mail). If both buttons appear together, a user could review their answers, reload/take the lesson again to improve their score, and then send the report only if they did well.
So the question is: Is there a way to control the Review Quiz button?
I do have a workaround: Make the Review button transparent and put an image of the button on the slide to appear 20 or 30 seconds into the slide, hopefully the user will have reported their answer before the review button appears. But this is a trick and a savvy user might notice it. (Particularly since there are several lessons that they'll take.)
Thanks for your help!
Jenny N

OK, limitation to the workaround.
It doesn't seem to matter where I put the "pause after" control on the slide, the slide pauses about half-way through the slide length. So I have to make the slide length 2x the time I want before the pause (So for a 20 second pause, I had to set the slide length to 40 seconds).
Hope this helps if anyone else tries something like this,
Jenny N

Inconsistent Continue button function when Retake Quiz button is present

Hi, I am using Captivate 4 on a Win7 computer. My problem is this. I have setup a 10 question quiz at the end of my module. On the results page (slide 37), I have a Review Quiz button, a Retake Quiz button, and a Continue button. The user can retake the quiz if she/he likes, but, regardless of whether the user passes or fails the quiz, they are to hit the "Continue" button which should jump to one of two slides (slide 38 for "Congratulations" or slide 39 for "Sorry, you did not pass") and then it is to automatically continue to the next slide that says "Thank you" (slide 40) and then the Captivate module is to close automatically. That's what is supposed to happen, and some of it does. However, here's what does happen. If the user passes the quiz and clicks the "Continue" button, everything works perfectly. But, if the user fails the quiz and clicks the "Continue" button - nothing happens. The "Continue" button fails to work. You click on "Continue" and nothing happens. It just stays on the results page. The slider does not advance either. However, if I delete the "Retake Quiz" button, then the "Continue" button works perfectly whether the user passes or fails. What is the fix here? I'm guessing you might need more information. I'l supply what I think might be relevant, below.
The progression:
Slides 27 - 36 : 10 slides of quiz question (one question per slide)
Slide 37 : Results page
Slide 38 : "Congratulations" slide for passing
Slide 39 : "Sorry, you did not complete this course..." slide for failing
Slide 40 : "Thank you."
Preferences/Quiz/Pass or Fail :
If passing grade: Action: Jump to slide 38
If failing grade: Allow user: 2 attempts
Show Retake Button is checked
Action: Jump to slide 39
Preferences/Quiz/Settings :
Pass Required - the user maust pass this quiz to continue
Thank you. Please let me know if you need any more information.
Jorge Gonzalez

D. Sharma,
Hi, sorry, all this time when you were saying "it" I thought you were referring to the Captivate module that includes the quiz. I didn't realize you were referring to the quiz alone.
Here's what I have: the module contains the quiz in it. In other words, the quiz was created in Captivate and is part of the module. The problem I described happens whether the module (with the quiz in it) is published locally or on the LMS. It makes no difference. The problem persists.
Sorry for the misunderstanding,
Jorge G.

Show Incorrect Answers Only on Review Quiz

Is there a way to show only the incorrect answers that the learner selected after clicking on the Review Quiz button? Basically I don't want the correct answers shown.

Which version are you using? If it is version 5 or before, you can just delete that part of the Review messages
Tried it with CP5.5 as well, but there this is not functional,
Lilybiri

Getting stuck in the Review Quiz option

Hello,
When from the Quiz results slide, a user clicks the Review Quiz button, it lets the user click through the slides and review, but none of the buttons take the user back to the quiz results slide when they are done reveiwing the quiz. I've seen it work at times and then not work in a later version of the file. Is there a setting that controls this? I don't want the user to have to go back to the outline slide and find the quiz results slide from there.
Thanks for your help.
Cristie Mullins

Hello,
When from the Quiz results slide, a user clicks the Review Quiz button, it lets the user click through the slides and review, but none of the buttons take the user back to the quiz results slide when they are done reveiwing the quiz. I've seen it work at times and then not work in a later version of the file. Is there a setting that controls this? I don't want the user to have to go back to the outline slide and find the quiz results slide from there.
Thanks for your help.
Cristie Mullins

Review Quiz Goes to the Beginnig of the Course vs. the Quiz

I have a course that contains several content slides and 10 question slides. When the user completes the quiz and clicks the Review Quiz button, Captivate takes them back to the very first slide in the course vs. to the first question slide. How can I get Captivate to go to the first question slide? I am using Captivate 7.

Thank you! That was exactly what was wrong. I had a button on the first slide and Report Answers was selected in Properties. I copied this button to other slides so the Review Quiz functionality started at the begining and stopped on all slides where Report Answers appeared. I used the Advanced Interaction window to identify all the Yes responses for Report Answers and made sure I deselected the check box on all content slides. Once saved, the course worked perfectly! The Review Quiz went to the first question slide. Thanks again.

Review Quiz - Matching Question

Hi fellow Captivate-rs! I'm urgently hoping for some help...
I've got a four-question "Knowledge Check" (quiz), complete with a "Results" slide, at the end of my project. When clicking the "Review Quiz" button, the correct answers display for the user to compare against theirs as well (as should occurr, of course). The only exception is with "Matching" questions. When reviewing them, I see yellow boxes where the correct answer could/should be viewed. However, the correct answer(s) do not appear. Does anyone know of a solution? Any help would be GREATLY appreciated!

Captivate doesn't allow much flexibility in these pre-programmed quiz question slides.
If you're not trying to output to HTML5 you could rebuild the question as a drag and drop interaction using the Infosemantics Drag and Drop Lite Question Widget.
http://www.infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/question
This widget has a special trick for showing the correct answer when in Review Mode. Your learner can mouse over an object you specify in the widget settings that will then cause the drag objects on screen to animate and move to their correct positions. See the instructions on this page under Show Correct Answer:
http://www.infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/question/help
If you want to experiment with a trial version you can download them here:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets

Backwards Navigation When Reviewing Quiz Questions

I have discovered from some students that they can cheat on my quiz. They take the quiz, review their answers and make note of the correct answers, then either drag the navigation slider backwards or click the Back button to return to the beginning of the quiz. This resets their original answers and allows them to retake the quiz with the answers they took from their notes.
The quiz is set up to allow multiple attempts, but I assume they should be starting over with each attempt. My quiz questions are randomized from a test pool, so hopefully they do not see the same questions again and not in the same order. However, by cheating in this way, they can take the same questions in the same order.
Is there anyway to limit backwards movement when reviewing the quiz?
I have turned off backwards movement while they are taking the quiz, but this setting is turned off when they start reviewing the quiz.
I am using Captivate 5.

Thanks for the information. Yes I have set the quiz up to allow users to review their answers. Yes I assume they will take notes on the answers, but I have not enabled the Retake Quiz button. Once they get to the results page and choose to review their answers, I assumed (incorrectly) that their answers would be locked and they would not be able to change the answers or results for their attempt.
My instructions tell them to relaunch the training, go through it again, and then take the quiz again. With the questions and answers being randomized, I was hoping that their notes (question 1 answer is B - question 2 answer is C - etc.) would not be very helpful to them and they would put effort into taking notes from the training to help them on the test instead.
You said the following:
"If a user clicks the Review Quiz button after any attempt, they will be unable to perform a new attempt on that quiz until they relaunch the lesson again. Also, if the user jumps outside the Quiz Scope by navigating back to any slide before the first scored object or quiz question, they will be unable to reattempt the quiz until relaunch."
I have tested this out, launching the training from the LMS, and it is not correct. I can go through the quiz, review my results, drag the slider or click the back button to the beginning of the quiz, and take the quiz again.
I have disabled backwards movement during the quiz, but once you start reviewing a quiz, backwards movement is once again enabled via the slider or back button.
I can hide the playbar and navigation controls, but when you get to the review, the navigation controls remain hidden and you cannot advance through the questions to see the results. I thought of adding a separate Forward button on the quiz question slides to allow the user to go forward as they review the slides, but you cannot add buttons or clickboxes to question slides.
I could certainly turn off the review functionality, but I think it is valuable information to the student. I need to allow them to retake the quiz, as my boss has set a very high bar (100% passing score) on the quiz.
Does anyone have any other ideas?
By the way, after typing up this response, I started doing some playing around, and I figured out a fix. I turn off the navigation controls before the quiz and enable the Skip button on each question slide. With the navigation off, the user can answer the questions and click Submit. Then when reviewing the answers, they can navigate forward by clicking Skip. They can no longer navigate backwards through the quiz and training material.

Review Quiz

I created 26 questions in the question pool. The current project only has 4 slides as viewed on the filmstrip:
First slide - Intro
Second slide - Random Question (linked to the Question Pool)
Third slide - Random Question (linked to the same Question Pool)
Fourth slide - Quiz Results
Hitting F12 to view in browser, everything appears to work well. However, at the end (quiz results), I then click the "Review Quiz" button and it only reviews the last question. I would expect it to start at the first question and review all questions; in this case 2 questions.
I experimented with answering both questions incorrectly to see if it would jump to slide 2, in this case, when clicking Review Quiz. But still the same behavior which is reviewing only the last question slide.
Any ideas?
Thanks,
Dan
Captivate 6
Version 6.0.0.199

I appreciate the quick reply. I watched a video on YouTube and realized that the problem was likely in the Quiz settings. I was doing a couple of things wrong but the primary item was not selecting "Submit All". Everything is working well now.
Thanks,
Dan

When you review quiz, can the answers be personalized?

I have created a quiz containing 14 multiple choice quiz:
I would like to personalize answers (i.e tell them why it is the right answer) to each question when the review the quiz, rather than show them what is right.
I would also like the continue and review quiz button to appear only after they score a certain %
Can these two things be done?
Kind Regards
Simi Ninan

In Captivate 7 and later versions there is a system variable you can use to detect when the user is in Quiz Review mode. You can use this variable to govern Conditional Advanced Actions on quiz slides that will Show or Hide captions that give learners the information you want, only during Quiz Review.
You can hide the Quiz Review button underneath the Retake Quiz button on the Quiz Results slide. The Retake Quiz button disappears as soon as the user has scored a passing score. You cannot hide the Continue button, but you can make disabled unless the user scores a passing score by setting the Quiz > Settings > Required drop down option accordingly.

Review quiz navigation

My Review Quiz button on the Results page of the quiz is taking me back to the beginning of the module instead of the beginning of the quiz. What can I do to fix that? I do not have any advanced action in the module and I do not see any navigation options in the Review Quiz button. I am using Captivate 6 on Windows 7.
I have noticed that the Review Quiz button works properly when I preview from the beginning of the quiz. However, it does not work properly when I preview the Project or preview in Web Browser.
Any help would be appreciated.
Darin

Rod,
I checked the Advanced Interactions, but did not find any interactive object on slide 10 where I’m being thrown back to.
It did seem kind of weird that the Results page does not show any interactive objects when there is a Continue button and Retake button on the slide.
Checked Actions under Quiz Pass or Fail. Not seeing anything unusual.
I did notice that I am taken back to the early part of the module with either the Review Quiz button or the Retake Quiz button. (I just tried the Retake button in the example above) Wondering if my Results slide might be corrupted.
Darin Fennell
Senior Instructional Designer
First Command Financial Services, Inc.
1 FirstComm Plaza, Fort Worth, Texas 76109
Office: 817-569-2385

Next button in Review Quiz not working in HTML5.

Hey folks,
We've created a course in CP7 and when I take the course on a Computer (SWF) everthing works fine, but when I take the course on an iPad (HTML5), and go into the Review Quiz section, the Next button is not working. When I click it you can see the click animation of the button being pressed, but it doesn't progress to the next question. I'm forced to close the window as there is no other navigational options, but when I do that and re-open the course, it takes me back to the beginning of the course like I haven't even attempted the course.
I've searched for a previous instance of this and I couldn't find anything, so I was hoping someone has either run into this issue before or might have a suggestion on how to resolve it. Any help would be much appreciated.

Hello,
Welcome to Adobe Forums.
Need more information about this issue :
1) Does it happen on a specific project or with a sample project as well (2 or 3 question slides) ?
2) Which iPAD are you using and what is the iOS version ?
Make sure you have CP 7.0.1 update installed (Launch CP7 -> Click on Help -> About Captivate)
Thanks,
Vikram
Adoeb Support

I deleted my review quiz button!

Similar Messages

Maybe you are looking for