I did a factory reset ,it said it will take a hour been 4 hours not and nothing

help i did a factory reset on my i pod touch ,it said it will take a hour to complete, been 4 hours and nothing all it does is reset then scan or 20 seconds then locks up then after 5 mins reboots then does the same

Try holding down the on/off and the home buttons at the same time until you see the Apple logo.  Take a look at this link, http://support.apple.com/kb/HT1808

Similar Messages

  • Kernel panic keeps happening even after I did the factory reset. any suggestions ?

    kernel panic keeps happening even after I did the factory reset. any suggestions ?

        Hi Hallry,
    Let's free your device! It's important to have a properly working device. Have you attempted an alternate Hard Reset on the device http://vz.to/19r2DOO? If the alternate Hard Reset does not work, then the device would need to be replaced. How long have you had this device? Any liquid or physical damage to the device? Keep me posted
    Thanks,
    PamelaF_VZW
    Tweet us @vzwsupport

  • I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up.

    I did a factory reset on my late 2008 MacBook from a Snow Leopard disc. It installed fine, but as soon as I began to use the computer (safari) it froze. Couldn't even force quit. So I held down the power button to turn it off, and now it won't start up. It goes to the grey Apple screen and just sits there loud as can be. Help! Please keep in mind I've not done anything like this before and am going to need a little hand-holding. Thanks in advance.

    Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!

  • I sold my iPad and put it in the mail and it seems to be stolen, I did a factory reset of the iPad to clear my data. Is there any way to retrieve it?

    I sold my iPad on eBay. I mailed the item and the buyer claims to not have it. I did a factory reset before sending and it is not coming up in my cloud. Is there another way to retrieve it?

    If it was restored as new then it no longer can be tracked.

  • TS1702 Went to update apps on ipod touch IOS 4.2.1. I did a factory reset. Now I can't get most of my apps back because I can't download version 5.0. I paid for some of these apps.

    Went to update apps on ipod touch IOS 4.2.1.  I did a factory reset and now I can't get most of my apps back & can't download version 5.0 which I need to get back some of my apps. I paid for some of these. I've tried my backup and it didn't put them back on.

    If your iPod Touch is too old for iOS 5 or later... there is not much you can do.
    When/if you get a later model iDevice you will be able to Download Past Purchases using the Original ID that made those Purchases. (providing they are still supported by the Developer)
    See Here  >  Download Past Purchases
    http://support.apple.com/kb/HT2519

  • My 5th generation Ipod locks up when I try to play a video?  I did the factory reset (ugh) and still, total lock up with video.  Any suggestions?

    My 5th generation Ipod locks up when I try to play a video?  I did the factory reset (ugh) and still, total lock up with video.  Any suggestions?

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • Did a factory reset. now it will not reactivate.

    did a factory reset. now it will not reactivate.

    Hi  What have you got on the Screen? Cheers Brian

  • TS4006 Did a factory reset now phone wont restore, itunes doesnt recognise phone all i get is emergency calls only

    I did a factory reset now i am unable to restore, itunes shows a usb connector but is frozen, phone shows emergency calls only, can ANYONE point me in the right direction

    Try rebooting the phone - hold both buttons (top and home) until the apple appears.

  • HT201441 I did a factory reset on my ipad mini but can't register it

    I did a factory reset on my ipd mini because it was doanloaing games , music, and other stuff from my family icloud account. but now its not letting me reactivate my ipad. i keep getting messages saying, " your username isnt allowed to activate this devise" or " your username or password is incorect" i made a new account about a month ago and logged on to the app store with it. i didnt however do the forget this devise on the old account which activated the ipad. i called apple and found out that my account had been delete or something where they couldnt find it. i was reading a post were someone remade an account that had been deleted and was able to remove the devise from the account. i logged on to icloud to remove the ipad but it says i have no devises registered.

    Hi. Don't worry it's nothing serious. Insert the Instal Disc (Snow Leopard) and press the C button while turning on the computer. Once you see the desktop, go to Utility and choose Disk Utility. Select the Macintosh Partition on the left window pane and then click on Repair Disk and Repair Disk Permissions on the bottom right corner. Wait for both processes to finish. Click on the Apple icon (top left corner) and choose quit. Your computer should restart. See if it reboots normally. If not you can always reinstall the OS following the same steps. Good luck!

  • HELP I did a factory reset on my dv7-6195

    Please help.I did a factory reset on my laptop. and following instuctions i backed up my files onto an go-flex external drive.Im assuming it backed up programs as well as libraries ..documents etc...its on g local disc.when i view the drive i just see a bunch of numbers so i really dont know how to get the desired files back on my computer.i did a paste and copy of the drive but it just copied it back on to the drive. so oviously im a complete novice w everything computer. with having a factory reset the files they ask me to backup...cant be added{ recovered} because the manager says no back up has been performed so i know im doing something wrong.there an option to include the folders-files in the library would that make the files more discript ? then i can move them to their appropriate locations..including back onto the external drive..this is all guess work..and finally im under warranty and have total care as well...im running windows 7..thank you in advance. oh and something went amiss when the copy was made but one window covered the other window to see what happened to the file.

    Usually there is one .EXE file within the backed up files, Restore.exe or similiar, that can be double clicked to run and it extracts the files to a folder on your C drive.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I have an ipad 4 running ios 7 but i noticed ios 7 on my ipad seems laggy. I already did a factory reset but it seems doesn't change a bit. Are there any solution for this or I need to wait for the next ios 7 update?

    Am I the only one who facing this problem or there someone else. I did a factory reset yesterday but it still laggy. Do I need to wait for the next ios 7 update or what?

    Hi Amish,
    I should have mentioned that I have signed out of the iCloud Control Panel several times and no syncing occurs.
    Thanks for your response anyway. I appreciate your feedback.

  • I did a factory reset on my ipod touch, but now when i try turning it on it just goes to the apple screen with the loading sign

    i did a factory reset on my ipod touch but now when i try turning it on it just goes to the apple screen with a loading sign, ive let my battery die and tried reconnecting but it still wont work. it doesnt even come up on itunes.

    Why won't it let you sync?  What happens when you try to sync it? Any error messages from iTunes?  How is your iPod configured to sync music from your iTunes library?  In other words, what options do you have selected from under the iPod's Music tab in iTunes?  To access this tab, plug your iPod in, select it under Devices in the left hand pane of iTunes, and over to the right locate and select the Music tab along the top.
    Or are you trying to manually manage your iPod's contents?  In other words, is the Manually manage music and videos option enabled from under the iPod's Summary tab?
    B-rock

  • HT201406 My phone keeps trying to facetime randomly during phone calls, it will also mute itself and put itself on speaker phone.  Anyone else have this problem?  I did the factory reset and I am still having issues.

    My iphone 4 will randomly try to facetime, mute itself, or put itself on speaker phone during a phone call.  I did the factory reset, but I am still having this problem.  Does anyone know what may be wrong, or has anyone else had this problem before?

    I have the iPhone 4s on Verizon and never had this problem until I recently updated to iOS 7.0.2. I have the same case on it for several months. Yesterday, when I was talking on the phone with someone, it appeared as though I lost the call. But when I looked down at my phone, it was trying to Facetime with someone in my contact list. It happened again today. Different person, but both people have names that start with "A", so they are at the top of my contact list. Very frustrating! So, obviously updating to the latest iOS either did not help or was the cause of the problem.

  • I rented Hurt Locker and the screen said it would take 16 hours to download.    That was 4 days ago and I still have 4 hours to go.  What's up with this?

    I rented Hurt Locker and the screen said it would take 16 hours to download.  It's been 4 days and I still have 4 hours to go on the download time.  What's up with this?

    Hi stephanie palmer,
    We would like to inform you that your order has been placed successfuly and you can strart using the subscription.
    Kindly follow the below mentioned link to install products.
    Creative Cloud Help | Download, install, update, or uninstall apps
    Kindly share the results once done.
    Thanks,
    Atul Saini

  • Hi I have only 2 days in USA to buy Mac Book Pro 13" with Retina display. The issue here is that I'd like to get the westerns spanish keyboard and at the apple store the guy said it will take 6 days. I was wondering if I do the purchase NY on the 7th of M

    Hi I have only 2 days in USA to buy Mac Book Pro 13" with Retina display. The issue here is that I'd like to get the westerns spanish keyboard and at the apple store the guy said it will take 6 days. I was wondering if I do the purchase within the express checkout, Will I be able to get the laptop before leaving NY on the 7th of May 2014?
    I do not have any experience with the express checkout, actually I do know how it works, any advice please?
    Thanks!!!!

    Call the store on the telephne and ask. However, I doubt it since a store would not normally have an item with non-USA features
    Also, this is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum

Maybe you are looking for

  • Procure-to-Pay Scenario. Create Purchase Order

    Hello Experts: I have a question regarding the Procure-to-Pay scenario and the Create PO functionality. we are in SRM 7.0, Classic Scenario and we try to implement the Procure-to-Pay functionality as it is described in OSS note 1263876 "SAP SRM: Conf

  • Error:- ORA-01795: maximum number of expression in a list is 1000

    Hi All, we are using database 11g. Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production i am getting one error while selecting the data from table. SELECT interco_type, entity, chapter_entity, tran_currency, source_id_entity,

  • Won't go to ftp site

    I cannot get onto an ftp site. When I type in Safari it says: You don't have permission to view "Macintosh HD". I set file sharing in Preferences but still no luck. Please advise.

  • Query (Select) that return TRUE  or false

    Hi I Need to do a query that return true or false SELECT TRUE INTO v_Envia_Maplink FROM SNCDE, SNAPL WHERE SNCDE.CDESEQ = OLD.CDESEQ AND          SNAPL.APLCFJSEQ = CFJSEQ_VR AND          SNCDE.APLCOD = SNAPL.APLCODHow can to do it ?

  • YTD Problem

    Hi Experts! I have an EVDRE where in columns I writte the current month and the next 6 periods. The user inputs all the data except two accounts: Total and Acumulated Total On acumulated total I have a dimension formula like: ([POSICIONES].[PG00002],