I did all the steps to restore and reset my Apple TV now it's says activating

my apple tv is now saying activating for the last hour after being
restored and reset thru my iTunes... What going on? It was working
last nite...

It's not properly connected to the network
Make sure location is set correctly
DNS is set to auto (settings-general-network)
If on WiFi try Ethernet

Similar Messages

  • I did all the steps to restore my password when you have never synched to a computer before.  I got to step 4 where my ipod told me to connect to itunes but itunes did not respond. what do I do now?

    I am trying to restore my password.  I followed the steps for doing so when you have never synched the ipod to your computer. I got so far as the 4th step when my ipod told me to connect to itunes.  The last step is itunes is suppose alert me that it senses a device going through recovery mode.  It never did that.  I also just downloaded the latest itunes so what do I do now?  Im only 10 and find this really confusing.  But Im trying

    Place the iPod in recovery mode and restore via iTunes on your computer. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • HT204291 I can't see the airplay icon not on my ipad or iPhone , I did all the step suggest above and also reset my network connection ( which help for 10 min and then the icon disappear again) , please someone help , I am Desperate

    HI Everyone,
    FInally I got my AppleTV  and connected it to my TV and network , sadly it took me hours until I succeed to activate airplay after finding out in some forum that I need to reset my network connections and the airplay icon will appear , happily it happend and I start looking for answers regarding the huge lag in mirroring stage ( which still huge problem that have to be solve after I will solve the airplay disappear issue) .
    after 10 min the airplay icon disappear at my IPad and iPhone and even resetting the network connection is not helping , please please please some one help !!!

    Avielofer wrote:
     BTW, it changing the wi-fi channel is necesary please explain how to do so.
    It's not necessary, but is a good troubleshooting step.  How to do so varies from brand to brand.  Look at the manufacturers website, they should have a manual available that explains how to access the settings and change it.
    Avielofer wrote:
    The ATV connected to the routher via wi-fi , but both sitting on the same shelf.
    In that case, I would strongly encourage you to connect them via a short Ethernet cable.  The proximity of the two devices could be the culprit in the video quality issues.

  • HT5312 I did all the steps, but my problem is that they are asking me some questions that I did not select when I created my Apple ID, so I clicked where it said reset security questions info... and then when I went to my email, they didn't sended me anyt

    I did all the steps, but my problem is that they are asking me some questions that I did not selected when I created my Apple ID, so I clicked where it said reset security quiestion info...... And then when I went and cheked my email, they did not send anything to me!
    This problem started 1 month ago!
    Ivana1728

    The email response is automated, and almost certainly is detected as "junk" or "spam". So, try again and check your spam folders for their reply.

  • I have two apple accounts, but can only access one. I did all the steps to recover the older account's password but nothing worked. I need to access the older account to update apps. Also would there be a way to just combine both accounts?

    I have two apple accounts, but can only access one. I did all the steps to recover the older account's password but nothing worked. I need to access the older account to update apps. Also would there be a way to just combine both accounts?

    Were you able to reset the account's password ? If not then how did you try to get it reset e.g. http://iforgot.apple.com (which would have sent it to the rescue email address if you have one on that account) ? You can also try contacting iTunes Support in your country to get it reset : http://support.apple.com/kb/HT5699
    And no, accounts can't be merged nor content transferred between accounts.

  • HT4623 e while updating iOS. When connected to PC & iTunes get the message in recovery mode, must restore.   I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

    iPad 2 froze while updating iOS 7.0.4.  When connected to PC & iTunes get the message in recovery mode, must restore.   I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

    Sorry if we didn't get to your question fast enough; we are all volunteers doing this in our spare time. Try the steps in this article. If you're unsuccessful, you'll need to take your device to the Genius Bar for an evaluation.
    http://osxdaily.com/2010/12/04/ipad-dfu-mode/

  • HT201407 i did all the steps to resolving the problem  that my wi-fi does not turn on but it didnt work

    i did all the steps to resolving the problem  that my wi-fi does not turn on but it didnt work

    Hello there, Ahmedalheety.
    If you are unable to connect to WiFi with your phone, you will find pretty extensive steps at the following Knowledg Base article to resolve that issue:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the o

    When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.

    Hi pissedadobeuser,
    Does this issue occur with any particular web page?
    Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
    Which Browser version, OS version and Acrobat version are you using?
    Regards,
    Rave

  • HT1390 I did all the steps in this article but I get the msg:  "Movie Title" was not copied to the iPad because it cannot be played on this iPad.  The moive never moves over.  What gives?

    I did all the steps in this article but I get the msg:  "Movie Title" was not copied to the iPad because it cannot be played on this iPad.  The moive never moves over. 

    Did you download Tron in HD? If so, try syncing the SD version that came with it

  • HT1414 Hello, everyone, I followed all the steps to restore but at the end, it says: the device isn't eligible for restore. How to fix it? Thanks all.

    Hello, everyone, I followed all the steps to restore but at the end, it says: the device isn't eligible for restore. How to fix it? Thanks all.

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • How to fix error 9? I did all the steps that appel gave me to do.

    How to fix error 9? I did all the steps that appel gave me to do.

    You've worked through all the troubleshooting steps in these support articles?
    http://support.apple.com/kb/TS1286
    http://support.apple.com/kb/TS3125

  • My first generation iPad no longer recognized in iTunes, neither via usb nor wi-fi. Did all the steps  recommended in Apple iPad support. Now what?

    My first generation iPad is no longer recognized in iTunes. It just doesn't show up neither via USB nor via wi-fi.
    I've checked the usb connection and cable and its OK.
    I checked that iTunes is up to date on my Mac.
    I reinstalled iTunes on my Mac. 
    I restarted my Mac,
    I've restarted my iPad.
    The iPad has IOS 4.3.1 (8G4) installed. And without the iPad being recognized in iTunes  I can not update the IOS nor apps, nor remove unneeded photos. The iPad is completely filled up, no memory left to allow even updates via cellular or via wi-fi.
    Trying to gain access to update the IOS and to update APPS and to remove the pics I already have backed up and do not need on this iPad locally.
    PS: I even tried to connect the iPad to a different Mac and it was not seen in that iTunes either.
    So, what can I do now?
    Any suggestions besides using it as a paper weight?
    Thanks

    Hello there, Blueye3355.
    The following iPad Troubleshooting Assistant has some good steps to run through, to make sure you've covered all your bases:
    Apple - Support - iPad - iTunes Assistant
    http://www.apple.com/support/ipad/assistant/itunes/
    If following all the steps listed there are additional options on the last step you might want to try or review the "if the issue persists" steps mentioned in the second part of:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Windows Update Error Code 80072F8F! I Did All The Steps And Will Not Fix Please HELP?

    No one seems they can not help me fix this error code I did many things and not one person has really
    helped me, I have a question at another forum but all they do is just ask me questions tell me steps to fix this but nothing worked at all, This happened on 8/30/2014 and ever since no one can help me fix this at all....I have no money to pay for the fix...I
    am on very very low limited disability income, No credit cards nothing. I need help now I paid a lot of money for my Windows 7 Ultimate and now since 8/30/2014 I got that error code no one has helped me....PLEASE help me please....And I am not sure where to
    go for help here thank you. I have done many things but nothing is fixing this issue. please help...And yes I did the clock and clock keeps perfect time, doing that clock did not fix this error code at all...

    Hi Angelsims,
    First I also want to get more information from you to help us to troubleshhot:
    1.Did this error occur on a single update or multiple updates? please also post the update name in issue.
    2.Please also post the steps you have followed to fix this issue.
    In addition, please try to use the general steps to troubleshoot the windows update issue, and refer to the steps below:
    The following outlines how to stop services pertaining to Windows Update, rename system folders, register related DLL files, and then restart the previously mentioned services. This troubleshooting generally applies to all Windows Update related issues.
     Stopping services pertaining to Windows Update
    1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
    2.     If you receive a notification from User Account Control simply click Continue.
    3.     At the command prompt, type the following, commands and then press ENTER after each command.
            net stop wuauserv
            net stop bits
            net stop cryptsvc
     Please do not close the Command Prompt window.
     Renaming folders pertaining to Windows Update
    1.     At the command prompt, type the following commands, and then press Enter after each command:
    2.     ren %systemroot%\System32\Catroot2 Catroot2.old
    3.     ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
    4.     Please do not close the Command Prompt window.
     Registering DLL’s pertaining to Windows Update
    1.     Please copy and paste the following text into a new Notepad document, and save the file as WindowsUpdate.BAT
    2.     If saved correctly the icon will change from a Notepad file to BAT file which has two blue cogs as its     icon.
                                           -or-
    3.     You can manually type each command at the command prompt:
             regsvr32 c:\windows\system32\vbscript.dll /s
             regsvr32 c:\windows\system32\mshtml.dll /s
             regsvr32 c:\windows\system32\msjava.dll /s
             regsvr32 c:\windows\system32\jscript.dll /s
             regsvr32 c:\windows\system32\msxml.dll /s
             regsvr32 c:\windows\system32\actxprxy.dll /s
             regsvr32 c:\windows\system32\shdocvw.dll /s
             regsvr32 wuapi.dll /s
             regsvr32 wuaueng1.dll /s
             regsvr32 wuaueng.dll /s
            regsvr32 wucltui.dll /s
             regsvr32 wups2.dll /s
             regsvr32 wups.dll /s
             regsvr32 wuweb.dll /s
             regsvr32 Softpub.dll /s
            regsvr32 Mssip32.dll /s
             regsvr32 Initpki.dll /s
             regsvr32 softpub.dll /s
             regsvr32 wintrust.dll /s
             regsvr32 initpki.dll /s
            regsvr32 dssenh.dll /s
            regsvr32 rsaenh.dll /s
             regsvr32 gpkcsp.dll /s
             regsvr32 sccbase.dll /s
             regsvr32 slbcsp.dll /s
             regsvr32 cryptdlg.dll /s
             regsvr32 Urlmon.dll /s
             regsvr32 Shdocvw.dll /s
             regsvr32 Msjava.dll /s
             regsvr32 Actxprxy.dll /s
             regsvr32 Oleaut32.dll /s
            regsvr32 Mshtml.dll /s
             regsvr32 msxml.dll /s
             regsvr32 msxml2.dll /s
             regsvr32 msxml3.dll /s
             regsvr32 Browseui.dll /s
             regsvr32 shell32.dll /s
             regsvr32 wuapi.dll /s
             regsvr32 wuaueng.dll /s
             regsvr32 wuaueng1.dll /s
             regsvr32 wucltui.dll /s
             regsvr32 wups.dll /s
             regsvr32 wuweb.dll /s
             regsvr32 jscript.dll /s
             regsvr32 atl.dll /s
             regsvr32 Mssip32.dll /s 
     Restarting services pertaining to Windows Update
    1.     Click Start, click All Programs, click Accessories, right-click Command Prompt, and select Run as Administrator.
    2.     If you receive a notification from User Account Control simply click Continue.
    3.     At the command prompt, type the following, commands and then
    press ENTER after each command.
            net start wuauserv
            net start bits
            net start cryptsvc
             exit
    Please try the steps above, if the step failed, please post the error or failure information.
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang       

  • I forgot my security questions and cannot make purchases I have followed all the steps on how to reset them but I have the wrong email address asigned so it is emailing the security questions to the wrong person. How do I change my email?

    I forgot my sucruity questions so I cannot make purchases I pressed the button that said "click here if you have forgotten your sucruity questions" and it took me to the apple website I followed the steps and then it said "do you want to send the sucurity questions to k******@charter.net (exactly that including the ****) and I didn't know what to do so I pressed send but that is not my email so I did not get the questions. How do I change the k*******@charter.net to my email?

    1)  Apple ID: All about Apple ID security questions
    2)  See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security

  • My itunes won't recognize my ipod touch. I have gone through all the steps 2 times and still nothing., My itunes won't recognize my ipod touch. I have gone through all the steps 2 times and still nothing.

    My itunes won't recoginiz my ipod touch. I have gone through all the troubleshooting steps 2 and still have the problem.

    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

Maybe you are looking for

  • FCP to NTSC monitor solution help required

    Greetings, Please forgive me, this is my first foray into owning a Mac. I am getting started with Final Cut Pro, and am looking for a good way to capture analog sources, and output my FCP timeline to an NTSC monitor. My monitor takes RGB and componen

  • Idoc control record DIRECT field mapping

    Hello, I have a file to idoc scenario where the receiver system is an external one. I have the necessity to set in the outbound idoc control record DIRECT = 1. The XI system is XI 3.0 SP 19 and I've set up the mapping of the idoc control record in th

  • Cant reset my apple security question

    i forgot my security questions and i try to reset them by the email that is regestered isnt mine i found out some guy from a different country was using it and he tried resetting my password several times because ide log onto my email and the changin

  • CST% should calculated two different rate for C Form /  Without C Form

    Hi, How we can assign to one CST% condition against two different rates for C Form / Without C Form for same Plant/Vendor/Material. My scenario is, we have purchased the Material for one plant from Vendor, but Vendor has given the material against C

  • Jsp( %@ include file )

    suppose abc.jsp <% ! x=4 ; %> xyz.jsp <%@ include file = "abc.jsp" %> < % x=4; %> < % System.out.println ' x' =+x %> what will happen ?