I did'nt recieve the DVD of OSX Lion with my IMac. Is it normal? Can I engrave it from my computer?

When I recieve my IMac I realised that there was no DVD of OSX Lion with it. But I've Hearf that I needed it if I wanted to install a windows by BootCamp
Maby I can engrave it on a DVD from my computer but I realy don't where is it and I'd reall like to know if it's normal not to have recieve this DVD with my IMac

Lion does not come on a DVD. There are various ways to create a backup and you can buy a USB thumb drive with the installer. I can't help with needing a DVD to install Bootcamp/Windows since I do not run Windows.

Similar Messages

  • I bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do hlp?

    i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do to install my bootcamp and apple software in win 8
    thanks in advance,,,

    ahmad_uetlhr09 wrote:
    i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook
    Boot Camp does not come on DVD, what did you install.

  • Troubleshoot Cisco Airlap 1242 with WLC 4400 Series LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response

    I have a Problem with my new AIRLAP 1242 to connect with WLC 4400
    after debug in my airlap it shows :
    Reset done!
    ethernet link up, 100 mbps, full-duplex
    Ethernet port 0 initialized: link is up
    Loading "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.123-7.JX8"...######################################################################################################################################################################################################################################
    File "flash:/c1240-k9w8-mx.123-7.JX8/c1240-k9w8-mx.123-7.JX8" uncompressed and installed, entry point: 0x3000
    executing...
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX8, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2007 by Cisco Systems, Inc.
    Compiled Mon 19-Mar-07 01:42 by hqluong
    Image text-base: 0x00003000, data-base: 0x004051E0
    Initializing flashfs...
    flashfs[1]: 9 files, 3 directories
    flashfs[1]: 0 orphaned files, 0 orphaned directories
    flashfs[1]: Total bytes: 15998976
    flashfs[1]: Bytes used: 5062144
    flashfs[1]: Bytes available: 10936832
    flashfs[1]: flashfs fsck took 4 seconds.
    flashfs[1]: Initialization complete....done Initializing flashfs.
    cisco AIR-LAP1242AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
    Processor board ID FCW1411U0FZ
    PowerPCElvis CPU at 266Mhz, revision number 0x0950
    Last reset from power-on
    1 FastEthernet interface
    2 802.11 Radio(s)
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 68:EF:BD:5F:9A:18
    Part Number                          : 73-10256-07
    PCA Assembly Number                  : 800-26918-06
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC14093XU3
    Top Assembly Part Number             : 800-29152-03
    Top Assembly Serial Number           : FCW1411U0FZ
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-LAP1242AG-E-K9
    Press RETURN to get started!
    *Mar  1 00:00:05.608: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
    *Mar  1 00:00:06.858: %DOT11-2-VERSION_INVALID: Interface Dot11Radio0, unable to find required radio version 581.18
    *Mar  1 00:00:06.858: Interface Dot11Radio0, Accepting as a test version of radio firmware
    *Mar  1 00:00:06.878: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
    *Mar  1 00:00:07.234: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Mar  1 00:00:08.212: %DOT11-2-VERSION_INVALID: Interface Dot11Radio1, unable to find required radio version 581.18
    *Mar  1 00:00:08.212: Interface Dot11Radio1, Accepting as a test version of radio firmware
    *Mar  1 00:00:08.232: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
    *Mar  1 00:00:09.278: %SYS-6-LOGGERSTART: Logger process started
    *Mar  1 00:00:09.326: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.3(7)JX8, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2007 by Cisco Systems, Inc.
    Compiled Mon 19-Mar-07 01:42 by hqluong
    *Mar  1 00:00:09.332: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power source
    *Mar  1 00:00:09.388: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning frequencies for 32 seconds
    *Mar  1 00:00:10.271: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
    *Mar  1 00:00:10.332: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Mar  1 00:00:10.332: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar  1 00:00:11.271: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
    *Mar  1 00:00:28.331: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
    *Mar  1 00:00:28.361: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2462 selected
    *Mar  1 00:00:28.362: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
    *Mar  1 00:00:28.363: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
    *Mar  1 00:00:28.369: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5260 selected
    *Mar  1 00:00:28.372: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
    *Mar  1 00:00:28.398: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar  1 00:00:28.399: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
    *Mar  1 00:00:28.465: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
    *Mar  1 00:00:29.398: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
    *Mar  1 00:00:29.465: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
    Translating "CISCO-LWAPP-CONTROLLER.ekahospital.com"...domain server (202.134.0.155)
    *Mar  1 00:00:38.351: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 172.31.xxx.xxx, mask 255.255.255.0, hostname AP68ef.bd5f.9a18
    *Mar  1 00:00:38.820: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2417 selected
    *Mar  1 00:00:38.827: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5200 selected (203.130.196.5)
    *Mar  1 00:00:49.835: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2422 selected
    *Mar  1 00:00:49.842: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5220 selected
    *Mar  1 00:00:49.851: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
    *Mar  1 00:00:49.852: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
    *Mar  1 00:00:49.852: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
    *Mar  1 00:00:50.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
    *Mar  1 00:00:50.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
    *Sep 18 07:02:25.504: %LWAPP-5-CHANGED: LWAPP changed state to CFG
    *Sep 18 07:02:29.288: LWAPP_CLIENT_ERROR: lwapp_name_lookup - Could Not resolve CISCO-LWAPP-CONTROLLER.MYDOMAIN.com
    *Sep 18 07:02:30.504: LWAPP_CLIENT_ERROR_DEBUG: spamHandleCfgReqTimer: Did not recieve the Config response
    *Sep 18 07:02:30.551: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET CONFIG RESPONSE.
    *Sep 18 07:02:30.551: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.
    flashfs[0]: 9 files, 3 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 15998976
    flashfs[0]: Bytes used: 5062144
    flashfs[0]: Bytes available: 10936832
    flashfs[0]: flashfs fsck took 26 seconds.
    Base ethernet MAC Address: 68:ef:bd:5f:9a:18
    Initializing ethernet port 0...
    Reset ethernet port 0...
    Reset done!
    and after that i check in my WLC that shows
    AP with Base Radio MAC xx:xx:xx:xx:xx:xx (APxxxx.xxxx.xxxx) is unable to associate.
    The reulatory domain configured on it '-e' does not match the controller's country
    code: USA
    i found that the problem about the region.
    question :
    1. is it possible to change the region in AIRLAP 1242 or in WLC?
    2. if possible how to change it?
    INFO :
    my first AIRLAP Product/Model Number : AIR-LAP1242AG-A-K9 and my new AIRLAP Product/Model Number : AIR-LAP1242AG-E-K9

    WLC GUI >> Wireless >> Country >> Select the country.
    Regards
    Surendra

  • I did not recieve the password recovery instructions in my email?

    i did not recieve the password apple id recovery instructions in my email?

    Hey cuquintana,
         Sometimes, you can add a rescue email to your Apple ID. This is good in the event that you forget your password, as it will send that email to both your primary email address and your rescue email address. I would recommend checking your other email addresses first, and if you don't find anything, give Apple a call and have them walk you through the process of resetting it, just to make sure you've got your bases covered.
    Hope this helps,
    Bryan

  • HT4059 I bought a book that was priced $7.99 but was charged $14 and did not recieve the usual reciept for it, who do I contact for help?

    I bought a book that was priced $7.99 but was charged $14 and did not recieve the usual reciept for it, who do I contact for help?

    You most likely did not receive the usual receipt because it was one of those authorization charges. It happens time to time, and should drop off your card. But go ahead and check with iTS just to make sure.
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • HT2474 I did a clean reinstall of mountain lion and for some reason the dock keeps osx lion format

    I did a clean reinstall of mountain lion and for some reason the dock keeps osx lion format. Does someone how to uptade only dock application?
    Tks

    Try doing a Dock restart using the following Terminal command:
    killall Dock
    Log out/in and test. If that doesn't work.
    You need to look in your user Library/Applications Support/Dock for the .db. Hold down the option key while using the Finder “Go To Folder” command. Enter ~/ Library/Applications Support/Dock.  Move the .db to your desktop.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    http://osxdaily.com/2011/07/04/show-library-directory-in-mac-os-x-lion/
    You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.
    Then try a dock reset.
    Applications/Utilities/Terminal enter the command
    killall Dock
    Log out/in test. If it works okay, delete the .db from the desktop.
    If the Dock is the same, return the .db to where you got them from, overwriting the newer ones.

  • Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?

    Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?

    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT5661
    MaggySimpson wrote:
    Hi! I sold my Iphone on ebay.
    Follow the instructions to remove a device you no longer have.
    From here  >  http://support.apple.com/kb/PH13695?viewlocale=en_US

  • I just replaced my hard drive and am trying to install the Snow Leppard OS on my Mac mini using the DVD's that came with the unit. Is there a step by step procedure that will guide me through this process?

    I just replaced my hard drive due to failure in my Mac mini. I am trying to load the Snow Leppard OS from the DVD's that came with the unit. Is there a step-by-step procedure somewhere that would help me? This is my first problem with my first Mac. I thought getting to the hard drive and changing it would be the hard part but I made it through that with little trouble. My lack of software experience on the Mac is really slowing me down. I believe I'm not making the right choices in the Disk Utility program.Any help would be greatly appreciated. Thank you.

    Prep the new drive:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Upon completion quit DU and return to the installer. Install OS X. When the installation has completed you can proceed to restore your data from your backups. If you have an existing backup from Time Machine or another hard drive then upon completing the Setup Assistant you will have an option to restore from another Mac, a TM backup, or another drive. Use the appropriate option.

  • I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated.   I've done transcoding but It downgrade to 480   I need urgent help.

    I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated.   I've done transcoding but It downgrade to 480   I need urgent help.

    Hi,
    first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
    first i edited my video in premier cc
    sequence 1280X720, 59,94 fps
    48000hz - stereo
    the i linked it with dynamik link to after, make some color correction, etc etc etc
    i renderd in quicktime animation
    my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
    i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

  • Where is the pinching in OSX Lion gone?

    Where is the pinching in OSX Lion gone?

    It's still there as defined in System Preferences > Mouse/Trackpad.  It doesn't pinch on finder windows anymore or Desktop.
    Regards,
    Captfred

  • My up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
    Product updates

  • What is the best N.A.S non-mirrored storage that will work on osx lion with a time-capsule

    Recently bought a 4TB external network non-mirrored drive. Specifically D-Link DNS-325 2-bay sharecenter NAS because my Itune library was reaching 1.8TB. After buying and installing can't bring it all online. System sees it but won't connect and after lookin' around  online it seems if your using OSX Lion with a Time-capsule it won't connect. Does anybody know if this for sure, is not posible?
    Any suggestions would be greatly appreciated!

    Apparently the NAS will work with Lion just not with the Time-Capsule as well. As this is my router this should be the forum. If you don't then if you could forward it to the appropriate one i'd appreciate it.

  • I brought a iphone 5c from ebay, when i recieve the i item its loked with i cloud, and also had a tmobile sim card in the slot...now i cant access the phone because its locked with i cloud,i do not have the owner details to contrac him,,

    i brought a iphone 5c from ebay, when i recieve the i item its loked with i cloud, and also had a tmobile sim card in the slot...now i cant access the phone because its locked with i cloud,i do not have the owner details to contrac him....but i called to tmobile, they said this phone is not a stolen one,,thet told me to contrac apple.....is apple can unlock the icloud?

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • I have a Mac OS X version 10.5.8 and recently got an Iphone4. I can not access Icloud from my computer. Is there any software, new operating system or anything I can purchase that will allow me access to the cloud?

    I have a Mac OS X version 10.5.8 and recently got an Iphone4. I can not access Icloud from my computer. Is there any software, new operating system or anything I can purchase that will allow me access to the cloud?

    Upgrading to Snow Leopard, Lion, or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
    Be sure your computer meets the minimum requirements:
    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
      1. iMac (Mid 2007 or newer)
      2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
      3. MacBook Pro (Mid/Late 2007 or newer)
      4. MacBook Air (Late 2008 or newer)
      5. Mac mini (Early 2009 or newer)
      6. Mac Pro (Early 2008 or newer)
      7. Xserve (Early 2009)
    Are my applications compatible?
    See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
    Am I eligible for the free upgrade?
    See Apple - Free OS X Mountain Lion upgrade Program.
    For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
    Model Eligibility for Snow Leopard and Lion.
    Snow Leopard General requirements
      1. Mac computer with an Intel processor
      2. 1GB of memory
      3. 5GB of available disk space
      4. DVD drive for installation
      5. Some features require a compatible Internet service provider; fees may
          apply.
      6. Some features require Apple’s MobileMe service; fees and terms apply.
    Lion System Requirements
      1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or
          Xeon processor
      2. 2GB of memory
      3. OS X v10.6.6 or later (v10.6.8 recommended)
      4. 7GB of available space
      5. Some features require an Apple ID; terms apply.

  • Spill water on my Iphone and I want to recover photos on my Ipad The pictures on the Iphone were not shared with other apple devices is it possible get my photos from the iCloud ?

    spill water on my Iphone and I want to recover photos on my Ipad The pictures on the Iphone were not shared with other apple devices is it possible get my photos from the iCloud ?

    Had you set your iPhone up to use Photo Stream?
    Had your performed an iCloud backup of your iPhone before it was damaged?
    If you did neither of the above, then your photos are not in the cloud, and they are gone.
    If you performed an iCloud backup, then it would contain the photos in the iPhone's Camera Roll (taken on the iPhone) at the time of your last backup.  You could restore this iCloud backup to a device.
    If your iPhone used Photo Stream, those photos are immediately accessible to your iPad if you set it up to use the same Photo Stream.

Maybe you are looking for