I did't finf client system

hi guru's
i did't find client system under Admin in MDM console repository.
in the process of r/3 integration with mdm through xi.
Thanks in advance
Swari

Hi Swari,
You will have to create one new remote system represnting the R3 systems and set the property for same. It can be done in the Remote Systems Table present under the Admin Node of the repository.
You will have to create ports after that.
You can refer to the link below.It tells in details the purpose of Remote systems & port.
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
Go to Remote systems & MDM.
After creating remote systems and ports, you can go with the documents guiding for the R3 Integration with MDM. Please find the info below:
R3-XI-MDM INTEGRATION-
1) Firstly you will have to extract the look-up table data from R3 using MDMGX transaction-
Please follow this link to know about the same:
How to Configure Master Data Management Reference Data Extraction -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0740b31-a934-2b10-2e95-af2252991baa
https://websmp203.sap-ag.de/~sapidb/012006153200000394732006E/MDM554_GenericExtactor.pdf
2) For loading the main Table Data into MDM, kindly follow the link below, which will guide you to the config/prcoess that will be required for the data to be uploaded from R3 into MDM.
2.1) R/3-XI-MDM (Outbound Scenario)
You will have to extract the data from R3 in the form of IDOCS and then using XI, you will have to convert them into XML format as MDM understands that.
2.2) For the process of Data from MDM back to R3, kindly refer this link below:
MDM-XI-R/3  Integration
2.3) For general info about this scenario, kindly refer this link below:
MDM Mass data Integration with R/3 made easy
Please follow these links for additional info-
1) SAP Network Blog: XI Configuration for MDM Integration - Sample Scenario-
XI Configuration for MDM Integration - Sample Scenario
2) The below given blog can be used to understand the XI config done when data is sent back from MDM via XI to R3.
MDM->XI->R3
MDM-XI-R/3  Integration
3) MDM 5.5 data distribution using SAP XI -
MDM 5.5 data distribution using SAP XI
Hope this info helps.
Thanks and Regards
Nitin Jain

Similar Messages

  • Error: Could not create system variants in multiple client system

    Hello ,
    I am trying to make changes to the variant CUS&_FINAL_AT in se38 , but the error message is coming while saving .
    error :Could not create system variants in multiple client system
    Could you please help?

    Hi Huynh,
    Did you ever figure out how to add custom fields to an e-recruit infoset?  I need to so same and would love a heads up on how.
    Leena

  • Adobe Acrobat vs Reader on client systems

    Has anyone tried running the Adobe forms on a browser client system that has both full Acrobat and Reader accessing a webdynpro/adobe forms application ?  What results did you get?  What is the recommended situation for handling this type of client?

    Hi Brenda,
    what happens with this setup depends on your Acrobat/Reader versions.
    If you have the currently released 6.0.2 versions, the standard behaviour is that Acrobat opens.
    If you want Reader to open instead, you'll need to use the Windows functions for File Type assignment under Folder Options -> File Types and assign Reader there. (It's described in the Adobe Document Services Configuration Guide.) This also means that if you want to use Acrobat for other files, you'll need to open Acrobat first to open the PDF.
    (A workaround would be to keep Reader running in the background before opening the WD application with the form.)
    As of the end of December, Adobe will ship Reader 7, which will allow you to determine your standard PDF opening tool through a dialogue, if you have both Acrobat and Reader installed.
    Markus Meisl
    SAP NetWeaver Product Management

  • IPhone caches password "store password on client system" is disabled

    On the cisco ASA vpn group policy the "store password on client system" is disabled. But despite that, the iPhone still allows the user to cache the password locally. Anyone found a way to force the user to enter a password on the phone everytime?

    Yeah you aren't the only one. I have the same router, and my iPod, dads iPhone, and 2 other apple macbooks always had troubles with the router. A temp fix would be restarting the router, but keyword here is temp.
    Unfortuantely we cant use custom linux firmware as per http://www.dd-wrt.com/site/support/router-database
    My router firmware version is
    Firmware Version: 1.30.05
    I recall I upgraded from version 1.00 ages back but that did nothing.
    Anyway I shall try google around for more solutions, I'll get back to you if there is a fix.

  • How to install Oracle FM Forms 11g on client system.

    Problem 1.
    I have an weblogic server installed on a server, now i have to install oracle Forms 11g in client system. its ask me weblogic server path whatever i try, its ask weblogic on client. what is the solution how installation of Oracle 11g form connect with weblogic server."
    Problem 2.
    i have install 64-bit OS windows 7.
    1. I Installed JDK 6 (64bit).
    2. Installed Weblogic Server. (its work fine)
    3. Now i m installing Oracle forms 11g 64(-bit). its show me an error (INST-07407: Unable to detect machine platform or JVM bits)
    please help me out. waiting for your positive reply.

    3. Now i m installing Oracle forms 11g 64(-bit). its show me an error (INST-07407: Unable to detect machine platform or JVM bits)It looks like you are installing the 32-bit version of Oracle Fusion Middleware (FMw) 11g - not the 64-bit version. As a test, install the 32-bit JRE and run the FMw installer again. If it continues past this point - you've got the 32-bit installer and not the 64-bit installer. :)
    Craig...

  • How to create Excel file in client system...

    please tell me,
    how to create a excel file in the client system. in my application i am displaying the report from database. my requirement is to create that report in excel format that should be stored in client machine...

    http://jakarta.apache.org/poi/
    One of the best solution.....

  • Can two different SRM clients systems connect to one R/3 Back-end system?

    Hello,
    Trying to developing SRM Co-Exist/Global strategy, based on the following scenario:
    1.  Two different SRM client systems, each at DIFFERENT SRM Version/Release Level.  SRM system "A" runs in Stand-Alone and Extend Classic Scenario mode.  SRM system "B" runs in Classic Scenario mode
    2.  Two different R/3 back-end systems, each with SAME R/3 4.7 Version/Release Level.
    Question 1:  Can the two (2) different SRM client systems be connected to one (1) of the R/3 back-end systems?
    Question 2:  Are there any Basis Plug-In (PI_BASIS) issues/difficulties to consider from either the SRM client or R/3 back-end side?
    Question 3:  Does each SRM client need it own unique transaction document type(s) and number range(s) definitions?
    Question 4:  Are there any other difficulties, for example, with RFC and Partner Profile related definitions and what are the steps to address/resolve difficulties?
    Please advise and thanks in advance for your feedback!
    Regards,
    Ed
    Edited by: Ed Shigo on Mar 16, 2009 6:40 AM

    Question 1: Can the two (2) different SRM client systems be connected to one (1) of the R/3 back-end systems?
    They can be connected
    Question 2: Are there any Basis Plug-In (PI_BASIS) issues/difficulties to consider from either the SRM client or R/3 back-end side?
    Make sure that you have unique consumer entries for Middleware for Material replication, RFCs etc
    Question 3: Does each SRM client need it own unique transaction document type(s) and number range(s) definitions?
    Yes you need to have them.
    Question 4: Are there any other difficulties, for example, with RFC and Partner Profile related definitions and what are the steps to address/resolve difficulties?
    Don't see any difficulties as long as the a structured approach is followed.

  • WebRequest.Create Hangs in Client system with Windows 8.1 with Fmrk 4.5

    Hi,
    We are hosting a Windows Form in IE builded with .Net Target Framework 3.5 and running in ASP.Net website's run time .Net Framework 2.0.
    Till now, this is working in Windows 7 and IE11 combination. When we planned to migrate to Windows 8 and IE11 combination, some functionalities in the Windows form hosted in IE fails, its keep on hanging.
    When we debugged the code, we found that hanging happens at
    1. To insert a image 
    WebRequest request = WebRequest.Create(url);
    2. While doing webservice call
    CSpellCheckerWS objCUserDictionaryWordsWS = new CSpellCheckerWS();
    Please find below our Trails for workaround:
    1. We have try catch block on top of above lines, but it never comes to catch or proceed (checked for more than 30 minutes), its keep on running that makes IE to hang. End user have to kill the IE to proceed with our web application.
    2. We have timeout option for WebRequest object, but we are having problem in the constructor itself, so unable to make use of timeout option.
    3. We planned to use HttpClient object, but for this we need to build our Windows Form with Target Framework .Net 4.5. But .Net framework 4.5 will no longer support to host the Windows Form in IE.
    4. We observed that, for our Windows Form project dll, say abcd.dll, we have ref link to abcd.config.xml
    in the ASP.Net hosted web page. If we remove the *.config.xml, then we do not have this hanging issue. So, our problem solves here. But we faced another problem. Now we are getting
    404 errors for all the dependent child dll for our main dll, abcd.dll. Even though we have child dlls in the same folder of abcd.dll, it is checking in website root folder, bin folder , .exe, .dll and finally after 8 iterations, it is picking
    the correct dll. So for multiple child dlls we are getting 9 * no. of child dlls = 404 errors. So, we are unable to proceed further.
    200 http://localhost/BrowserWebSite.CSharp/Default.aspx
    200 http://localhost/BrowserWebSite.CSharp/BrowserBin/BrowserApplication.dll
    200 http://localhost/BrowserWebSite.CSharp/BrowserApplication.config.xml
    200 http://localhost/BrowserWebSite.CSharp/BrowserBin/BrowserApplication.dll
    404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication.DLL
    404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication/BrowserChildApplication.DLL
    404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication.DLL
    404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication/BrowserChildApplication.DLL
    404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication.EXE
    404 http://localhost/BrowserWebSite.CSharp/BrowserChildApplication/BrowserChildApplication.EXE
    404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication.EXE
    404 http://localhost/BrowserWebSite.CSharp/bin/BrowserChildApplication/BrowserChildApplication.EXE
    200 http://localhost/BrowserWebSite.CSharp/BrowserBin/BrowserChildApplication.DLL
    So, please guide us how to proceed further. What is the relation between the *.config.xml and WebRequest.Create constructor and 404 errors.
    We have simple test application to replicate the issue. If needed, I can share the application.
    System Requirements to replicate : Windows 8.1, IE 11 and (Client system having .Net 4.5) and Windows / Web projects builded with .Net 3.5/2.0 respectively.
    Note : We have run caspol settings and set EnableIEHosting to 1 (DWord).

    Hello,
    >>When we planned to migrate to Windows 8 and IE11 combination, some functionalities in the Windows form hosted in IE fails, its keep on hanging.
    What .NET Framework version are you using after you migrate your client to windows 8 and IE11? If it is 4.0 or 4.5, I am afraid this is by designed because hosting controls in IE is now blocked by default (as of v4 or v4.5). See MSDN article under
    'Web Applications'.
    You could still enable it by modifying its provided registry key.
    By the way, since this issue is related with IE and web application, I suggest that you could post such kind of issues to related forum, as
    IE forum and Web forum.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I recently installed MacKeeper on my iMac.  It was a disaster.  I lost applications and files.  Fortunately I had back up.  Worst of all it did something to my system software that it takes about 7 minuts to stat-up.  What can I do to get it to start-up f

    Version:1.0 StartHTML:0000000186 EndHTML:0000002354 StartFragment:0000001670 EndFragment:0000002318 SourceURL:file:///Users/armandodiaz/Desktop/I%20recently%20installed%20MacK.doc                   
    I recently installed MacKeeper on my iMac. It was a disaster.  I lost applications and files. Fortunately I had back up. Worst of all it did something to my system software that it takes about 7 minuts to stat-up.  What can I do to get it to start-up faster?
    Thanks

    How to Remove MacKeeper
    Given you have a backup you may want to think about erasing the hard drive and reinstalling Snow Leopard then restore your backup.

  • File Transfer From Unix server to Windows Client System Using WebUtil

    Hi all,
    I want to Transfer a File from Unix Server to Window Client System using Webutil. But below mention code is not working.
    DECLARE
         V_Server_Path VARCHAR2(500) := Null;
         V_Client_Path VARCHAR2(500) := Null;
    BEGIN
         V_Server_Path := '/proj/oraapps/viper/dev/reports/cache/Saveauftr.txt';
         V_Client_Path := 'C:\Migration\EU_Applications\Lima\OAS_WorkArea\Client\Saveauftr.txt';
         IF WebUtil_File_Transfer.Is_AS_Readable(V_Server_Path) THEN
         IF WebUtil_File_Transfer.AS_To_Client(V_Client_Path,V_Server_Path) THEN
              Message('Downloading the File ..... .... ... .. .');
              Message('Downloading Was Successfull ...');
              Message('File Transfer from Server Was Successfull ...');
         END IF;
    END IF;
    END;
    Can anyone suggest me,Why the above code is not working and what to do for solve the Problem.
    Regards
    Gany

    Hello,
    You have more chances to get an answer in the Oracle Forms OTN Forum :
    Forms
    Regards

  • How to check the OSS note in SAP Client system ?

    Hi all
    I just have a small question ... how do we check whether an OSS note is applied in the SAP client System or not ?
    Please let me know..
    Thanks
    Mallikarjun

    Hi
    1) One way is checking the version and support pack applied.I.e,
    On the main SAP screen > Systems > Status > Check details of the "Component version".
    2) STMS > Double click on the system you need to check > Check the status of your request.
    Nadini

  • Error in client System.. forms are not opening...

    Form is not opening in client system...
    There is An error in Important:Do not close Window in Status bar Exception
    and form Is not opening...
    our application version 11.5.9
    database version 8.1.7.4
    here below some of the solutions i tried
    1.In JInitiator i have ticked the show java console.
    2.i added one 0 in run Java parameters before it has value :5000000 ..now it is having value :50000000
    3.in internetexplorer tools-->options i have deleted history,files& cookies..
    please reply me soon...
    here i attached the error
    java.lang.ClassNotFoundException: oracle.forms.engine.Main exception when loading: oracle.forms.engine.Main
    java.lang.NullPointerException
         at sun.applet.JinitAppletPanel.createApplet(JinitAppletPanel.java:668)
         at sun.applet.JinitAppletPanel.runLoader(JinitAppletPanel.java:581)
         at sun.applet.JinitAppletPanel.run(Compiled Code)
         at java.lang.Thread.run(Thread.java:466)
    Edited by: user13098774 on May 11, 2010 2:17 AM
    Edited by: user13098774 on May 11, 2010 2:25 AM
    Very Urgence
    Edited by: user13098774 on May 11, 2010 3:15 AM

    Hi user;
    What is your browser? Other client can login EBS and can work on it?
    Please check:
    Recommended Browsers for Oracle E-Business Suite 11i [ID 285218.1]
    If you are using IE Also check :
    Tools > IE options>>Advanced >> Under Browsing >> unchecl Enable third-party browser extensions
    IE 6 Crashes When Oracle E-Business Suite Access JInitiator 1.3.1.28
    IE 6 Crashes When Oracle E-Business Suite Access JInitiator 1.3.1.28
    Oracle JInitiator + Forms + IE = Crash
    Oracle JInitiator + Forms + IE = Crash
    Regard
    Helios

  • Is it posssible to lunch one application from the client system using JSP

    Is it possible to Lunch one application from the client system using JSP or Servlet .If it is possible then how can we do that ?
    Thanks in advance
    Sil

    If its a java application - yes. You can use jnlp and web start.
    ram.

  • Client System login takes more time

    Hi Experts,
    I try to login to client system it always takes more time to connect with server, after login there is no problem. .. i also try Firewall disable, License configure settings, and also disable extra network port, but still facing problem. please help on this......................

    Hi Ashok,
    Thanks for your valuable reply.
    Still issue is not Resolved while i followed your steps. my user is accessing the  system from USA and my server kept in India and the system taking 5-6 Min for Login in SAP. that's the reason the my client forcing to fix the issue.
    After checking the some forum i had found the OSS Note :1135705, is it resolve my issue?
    If you have any information regarding OSS Note regarding this  issue please send me.
    Your Reply will help for me. Thanks in Advance.
    With Regards,
    BJO
    Edited by: Baya Jo on Feb 22, 2012 1:41 PM

  • Access to Oracle Database by a specific user from a client system.

    Hi All,
    I need to restrict a particular client system to access the database only by a specific user credentials. I mean system A(hostname) can only connect the database PQR only and only by user U123. Any help is sincerely appreciated.
    Regards
    Swapan

    Hi,
    I solved it by a trigger at logon on V$SESSION which validates MACHINE like [HOSTNAME] and username not like [the_user_I_would_allow].
    It works now.
    Thanks for your reply.
    Regards
    Swapan

Maybe you are looking for