I did that , it is the first thing I did that , it is the first thing I did this amI did this am

I did that , it is the first thing I did this am

This is the last thing I've heard.
If you are replying to a post just don't start a new thread.

Similar Messages

  • HT1918 Can't burn music I purchased months ago, I could only burn the 4 cuts I bought this evening,6/9/12 message said originals cannot be found? Please help itunes would not let me buy a second time, thats a good thing but Im trying to make a music CD an

    Can't burn music I purchased months ago, I could only burn the 4 cuts I bought this evening,6/9/12 message said originals cannot be found? Please help itunes would not let me buy a second time, thats a good thing but Im trying to make a music CD and itunes will not let me?  The music is in my music file but will not let me burn them ! really I tried over and over, now Im just frustrated !
      Please find the original's purchased, my name and email have not changed. Thanks for your time and consideration.
    Jeannie
    7024503288
    [email protected]

    Fixed. /Users/x/Library/Application Support/SIMBL/Plugins/AirKeysInputManager.bundle got corrupted by a badly installed safari extension. Deleting this, then reinstalling adobe air did the trick. I wasn't thorough enough on my first try, it was tricky to find everything associated. I had to look for files in the console log then search for them. Spotlight was missing some deep files, EasyFind worked better for me.

  • HT4085 Did all these things mentioned in this article, even did a system reset including data and other settings. iOS is up to date, still the iPad 2 display is not rotating.

    Did all these things mentioned in this article, even did a system reset including erase data and other settings. iOS is up to date, still the iPad 2 display is not rotating.
    This happened first a couple of weeks before, then I did a reset and it worked. Then after 2-3 days it happened again, I updated the iOS and it worked after that. Next time it happened, I tried all possible methods, including switching to software - rotation lock on/off. The hardware when turns to off/on, shows the correct icon on the screen of the lock and unlocked state. But the rotation is not happening.

    Just check again.
    If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
    Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
    If the screen is unlocked but still will not rotate, reset the iPad.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If the iPad screen still will not rotate - turn it over and gently tap it on the back a couple of times - but gently tap it. Make sure that the screen is protected.

  • Get error message that skype has problem loading when computer is turned on the first time every day. this started when the latest firefox v6.0 was downloaded.

    get error message that skype has problem loading when computer is turned on the first time every day. this started when the latest firefox v6.0 was downloaded.

    ''mbratlie [[#question-1055011|said]]''
    <blockquote>
    It was working fine and I had no problems, and then one day I tried opening a window and it froze. When I tried quiting the program my whole window went black. The x to the close the window doesn't work. The only option I have in my tool bar is Firefox and nothing happens when I try to quit firefox. Every time I try to shut down my computer Firefox prevents it. I haven't updated Firefox yet, so it's an older program, but only by a month or two. What's going on and how do I fix it?
    </blockquote>
    This is the first time it's ever happened. I downloaded the new operating system for Firefox but I can't install it until the Firefox currently running on my laptop quits, which it won't.

  • I need to change the "from" address (the "add to addressbook" address) in the first line of emails that I send. How do I do this?

    I need to change the "from" address (the "add to addressbook" address) in the first line of emails that I send so that people reply to my email alias not the address where my emails originate. How do I do this?

    So you have added a new 'Identity' to your existing email address.
    If someone sends an email using that 'other identity'
    you have a choice of where those received emails can go. they can be received into the original mail account, like a collect all in the one Inbox or perhaps sent to Local Folders, so you can see them as separate. Or you can filter on that identity to put those emails in a specific folder.
    When you REply to any incoming mail that has used that new identity email address, it will use the new identity in the Email address in FROM assuming the received email in the main mail account of which the new identity email is applied.
    This should also now offer the added identity email address as an option in the FROM drop down list. So you can easily swap when sending an email if required.
    If you want to send using your default email address to people, but want their reply to use the identity email address:
    Tools > Account Settings
    select the original email address mail account name
    Where it says: 'Reply to addresses: enter the reply to identity email address.
    click on OK
    This means when they click on 'Reply' it will auto insert the Reply-to option.
    This will work providing it is a 'Reply' to an email you sent which contains the Reply-to email address.
    If someone is not actually replying by using the Reply-to new identity email address:
    In other words they are sending you a new email using the original email address because perhaps that is the one in their address book or the one they located on a webpage etc.
    Then, when you select to Reply to that email, it will use the email address to which it was sent to in the FROM field - the original email address. Hence why you would need to select the new identity FROM in the drop down list.
    One way to get around this is set out below.
    If you do not use an identity - instead you create another existing mail account for the 'identity' email address, so you have two mail accounts for the two email addresses.
    You can move selected emails manually or perhaps using a filter to screen them from the original mail account into the newly created mail account.
    Then when you click on Reply, it will use the new mail account email address instead of the original email address.

  • I want to save with alt s in the program Exact Online. This function is not working. this is the first time that i use this program with firefox.

    Question
    I want to save with <nowiki><alt><s></nowiki> in the program Exact Online. This function is not working. this is the first time that i use this program with firefox.
    '''edit''', mod escaped the '''<nowiki><s></nowiki>''' to prevent line through question

    Submitted too soon... To change your accelerator key for accesskeys to Alt alone (or a different combination), you can change a setting using Firefox's about:config preferences page.
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''ui.k''' and pause while the list is filtered
    (3) Make sure '''ui.key.generalAccessKey''' is set to its default value of -1 (or right-click and choose Reset if it is not).
    (4) Double-click '''ui.key.contentAccess''' to open a dialog box to change the value from its current default (on Windows, 5) to your choice of the following:
    * 2 = '''Ctrl''' (Fx default on Mac thru Fx13)
    * 3 = Ctrl + Shift
    * 4 = '''Alt''' (IE/Chrome/Safari default on Win/Linux)
    * 5 = '''Alt + Shift''' (Fx default on Windows & Linux)
    * 6 = '''Ctrl + Alt''' (Fx default on Mac from Fx14) (Chrome/Safari default on Mac)
    * 7 = Ctrl + Alt + Shift
    This should take effect as soon as you OK the dialog, so you can experiment in a separate tab. Other combinations are available if you want to try them. See http://kb.mozillazine.org/Ui.key.contentAccess (inaccessible at the moment?)

  • Please help me! I did a slideshow presentation in Powerpoint, then captured the end result in SnapzPro. Now what is the best way to burn this to a disc so that it can be watched on any pc / mac without losing quality? Its poor when I burn it via iDVD.

    Its crucial to keep the quality as best as possible, as this is a portfolio of my professional photographs and graphic design projects. Is there any need to go through iMovie? I captured it as an Animation in SnapzPro, which is now in a Mpeg4 Quickmovie format.

    _Share" the highlight as suggested_
    Thanks Lennart..... I'm not sure I know what you meant by the above.
    Do you mean that I share the little clips I want to use in the 'best of project'?
    I read the MacWorld article.... it's great thanks!
    I want to keep all these converted movies on my hard drive because down the road I want to extract other clips from them so I can make a 'best of' movie for my other family members. I may want to do that next year.... or whatever..... so I want to have the imovies available for me when that time comes.
    In order to do this am I going to have to buy a lot..... and I mean ALOT of extra hard drive space? That darn Canopus was really making files for me that were like 60-80GB's per one half hour movie!!
    Hey, I really appreciate all the time you are spending with me on this topic. Making these imovie memories are so very important to me.

  • Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message

    Using iPod shuffle 4th generation for first time and receiving the error : one of the USB devices attached to this computer has malfunctioned, and windows does not recognize it. For assistance in solving this problem, click this message.
    Using win 7 and latest iTunes [10.6.3]. Have already gone through below links and did not find any solution.
    http://support.apple.com/kb/HT2292
    http://support.apple.com/kb/TS1369
    http://support.apple.com/kb/HT1923
    http://en.kioskea.net/forum/affich-17997-ipod-not-detected

    I was hoping it would be something like a USB device conflict, but now the shuffle is the only thing connected...
    This article was one of the ones you linked to above in your initial post
    http://support.apple.com/kb/TS1369
    Under Part 9. Verify that USB drivers are installed, did you try the steps in If only "Unknown Device" appears?  That appears to be your situation.
    Also, you said that the shuffle initially worked well enough to do a sync, then it had the same problem again.  If you can get it to work again initially, before doing anything else, try the following.  Select the shuffle in the iTunes sidebar, under DEVICES.  Over to the right, go to the Summary tab.  By default, the checkbox for Enable disk use should be unchecked.  If so, check it and Apply the change.  See if that makes any difference. 
    (If Enable disk use was already checked, try unchecking it and Apply the change.  Basically, set it the "other way" and see if there is any improvement.)
    NOTE:  When disk use is enabled, you have to eject the iPod in iTunes before disconnecting it physically.
    If the disk use change makes a difference, that may provide a clue about the actual cause.

  • Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error ,

    Well I was using my iphone 5, When restart and it did not turn on gets stuck in the presentation of apple (the apple) and at the top left of the screen above the apple logo reincia Appears this text, down and then turns back on and i get the same error , i try to restore with itunes restore mode and throws me error!, could anyone help? I'm going crazy!. Thank you!
    This is the mistake That I get up the logo and then reboots iphone and Continues to Appear;
    (NAND) _findflashmediaandkeepout: 601 physical nand block offset 1
    (NAND) start: 356 this 0x96959400 PROVIDER = 0x96b1de80 falshmedia = 0x96b1de80
    (NAND) WMR_Start: 149 apple PNN  NAND Driver, Read / Write
    (NAND) WMR_Start: 174 FIL_INT (OK)
    (NAND) WMR_open :371 vfl_open (ok)
    (NAND) s_cxt_boot:88 sftl: error, unclean shutdown; adopted 7775 spans
    (NAND) WMR_open:420 FTL_open      (ok)
    (NAND)_publishServices:642 FTL capabilities: 0x00000001
    (NAND)_ppnvflGetStruct:3469 checking borrowed blocks-count:23 max_count:23
    (NAND)_fetchBorrowedList:881 number of borrowed blocks 16

    Hi Guys!
    I'm German, so my english writing might not be perfect
    I had the same Issue on a 5 i bought. Exact same screen and writing. Battery was totally drawn, first thing I had to replace. The screen had been replaced and since then it wouldn't work anymore according to the previous owner.
    It took me a couple hours, after recieving a few errors like 4013 it just never completed the restore, got really hot as well. The Flexwire of the Dock Connector seemed damaged, replaced the dock, but that didn't help.
    I almost gave up, thought the Logic Board was bad.
    BUT! Then i deceided to check if it has anything to do with the Screen assembly, and it did.
    Long story short, on mine the front facing camera, and sensor assy were bad.
    Anyhow, the phone works ''perfect'' when i leave them unplugged. So I just ordered a new one and we will see if thats the problem or if the damage is in the Logic Board.
    If so, i can live without the sensor and front cam.
    Just wanted to share, good luck everyone.

  • I have a new Macbook Air and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on. The computer is not hot.Any ideas on how I can fix this please ?

    I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?

    Hello dwb,
    Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
    Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
    Thank you again for your advice,
    Regard,
    Beauty of Bath

  • I just got my macbook pro a week ago and i was told that i will get the os x lion a week ago i was told that i can get it for free, is this true and if so how do i get it

    i just got my macbook pro a week ago and i was told that i will get the lion for free, if this is true, then how do i get it.

    Hi,
    Not that's not normal and is one of the Problems I was having before Restoring as New...
    Just make sure you Sync ALL your important Info... Contacts... Music... Etc... to your Computer...
    and then do a Restore as New...
    i was a bit reluctant at First, because I hadn't done it before... But it was So Easy and am Really Glad I did...
    Cheers,
    Here's Another Useful Link:
    http://www.apple.com/support/iphone/

  • I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not

    I use a mac ios and shoot raw in a cannon 5d mark ii and shortly upon import of my images lightroom darkens and changes my images. This has happened before but not every time. The strange part is my last shoot had the same camera setting but this did not happen. The images i have now i can not use after lightroom has automatically altered them even if i try editing back to how they looked upon import

    First thing to do is to change the default camera profile applied in Lightroom to camera standard (assuming that you shoot Canon or Nikon). Also make sure that your camera is NOT set up to use any of the HDR modes. Nikon calls those Active Dynamic Lighting. On Canons you often see things like highlight priority mode or "Auto Lighting Optimizer". Make sure that the picture style is set to standard and that for newer Canons the HDR mode is turned off. Most of the HDR modes simply underexpose the image and then add an instruction in the raw file to compensate for this to prevent highlights from being blown out. This causes more noise in the shadows and if you know what you are doing there is no point to this as you should simply expose correctly and get the highest quality raw.
    Lastly, make sure that in Lightroom you have not checked "Apply Auto Tone Adjustments" in Preferences->Presets. This should make the default rendering of the raw files the same as the in-camera jpeg (what the camera shows on the back even if you shoot raw) but still give you all the latitude of raw files.

  • When trying to update, I get the message: Account not in this store,...switch to the Canadian store.  How do I do that?

    When trying to update apps, I get the message:  "Account not in this store,...switch to the Canadian store before purchasing"  How to I switch, and how did it even get changed to US store?  I don't remember changing anything, and I used to be able to update, no problem..  I have synced with my computer for music - could it have happened then?  I changed on the computer to Cdn site, but will it not go to the iPhone automatically?

    On you iPhone go to settings-iTunes &amp; AppStore.
    Tap user name, sign out.
    Log back in with your apple ID and password.
    That should fix the problem

  • When I move my curser over certain things I get this Message in a window that pops up and says "We noticed you may have signed in or signed out in another window click ok to reload your page." How do I get this to stop.

    When I move my curser over certain things I get this Message in a window that pops up and says "We noticed you may have signed in or signed out in another window click ok to reload your page." How do I get this to stop.

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    You may have to create an Allow cookie exception for that server.
    * Tools > Page Info > Permissions

  • After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours. Help!

    After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
    I tried quitting and starting again but it just jumps back to the same spot.

    It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
    (I was unable to seach properly before which is why I posted the question - it was a bit of a panic)

  • When I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet.  How can this be and how do I fix it?

    when I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet.  How can this be and how do I fix it?

    Does the iPod connect to other networks?
    Do other device connect?
    Did the iPod connect to this network before?
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for