I did the last update to my mobile but I lost the ...
I did the last update to my mobile but I lost the ability to write in Arabic
Note that my mobile c7 and I live in the Kingdom of Saudi Arabia
Is there a file that can be Arabization you can send it to me to show the Arabic keyboard again
Thank you for your cooperation
@abh_q
Unfortunately re-installing desired language pack is beyond capabilities of support software provided by Nokia, so you should visit a Nokia Care Point for this to be carried out.
Happy to have helped forum with a Support Ratio = 42.5
Similar Messages
-
Since my last update on the newest version iPad I have not been able to download a magazine app that I have a subscription for as well I cannot open iPhoto's or video. When I go into settings and go down to where iTunes Mail etc are it freezes my I pad and I cannot access these. Is there a apple system problem? This has been going on for over a week now.
For FaceTime try the troubleshooting advice given here:
http://support.apple.com/kb/ts3367
Also try resetting your iPad:
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost. -
I use iTunes for my iPhone 4 and iPad 1 . When I did the ios5 update on my iPhone iTunes reported that threvwas a problem , tgatvsone of my data did not get copied . Well none of my data got copied , ios5 got installed ok but I lost all my photos , music , books , apps. What a horrible situation. I cannot get iTunes to run . It crashes after about 45 seconds , reports that something is preventing it from running . I repaired iTunes with a fresh iTunes 10.5 file but to no avail. Oh , and iTunes installed all my apps on my iPhone . Mean apps that were for my iPad and iPod touch. It installed about 300 apps on my iPhone. This is insane . That **** IOS 5 is a ruinous upgrade. What do I do ? I can't sync my iPad any longer no iTunes. I don't know.......
The passcode is defintely doing its job, denying access to your personal info from unauthorised users. The way I look at it is if there was another way to bypass the passcode then whats the point?. You would then have a passcode just for show, that didn't protect anything. Anybody and everybody would have access to all your data.
I understand your frustration in regards to losing data, thats one of the worst things that could happen with devices now days that hold so much information. I do not believe the issue was your fault but your colleagues. In saying that it would have been wise to make frequent iTunes back ups or enable automatic iCloud back ups as that is what they are there for.
As already explained this is a user to user forum, Apple does not comment or review the information. If you believe Apple should have another way to protect their devices or another way around this issue then please provide them with feedback here:
http://www.apple.com/feedback/
All the best. -
How to open search results in same window in Firefox 22 Always did before last update
Before the last update I would do a search on let say google and when I found what I wanted and clicked on it the window would switch to the result in that window, now it opens a new window. Another issue is I noticed when I have gmail open in a window and open another window that result comes up then switches back to the original window that was open last and the new window stays minimized on the bottom taskbar and I have to go back to open it again. If there are steps that need to be taken please list them.
Type '''about:config''' in Address bar and search '''browser.search.openintab''' and change the value to false
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I just downloaded the newest itunes software on my Acer Lap top, and also did a software update IOS 6.0.1 on my ipod thats 4th generation. Everytime I try to hook my ipod to the computer it doesnt work and I'm not sure why. Help!!
What do you mean by "it doesnt work"?
-
Last update of 8900 software version 5 - lost SMS items
After the last update, I noticed that a lot of SMS items that I had been keeping deliberately were lost and only the latest ones remained. I have two questions: 1- Is there a way I can retrieve them? 2- Why the people who designed the update take the liberty to delete messages without warning? Thanks for an answer to both questions
Solved!
Go to Solution.Did you do the update on a PC or did you do the update right from the device? If you did it from the pc then you should have the backup that the loading process made when you did the upgrade. Your messages should be in that backup.
If you did it OTA (from the device) then you don't have the backup and you likely won't get them back.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
Hi there, a week or so ago I did the software update for iOS 7.1.1, but since then, i can't seem to install new apps from the app store, and I can't delete any of my apps. I have already tried to reboot my iPad, i have removed my Apple ID, then did the reboot, and logged in again with the Apple ID, but still no change.
What can I do? I was thinking maybe the update didn't install correctly, and that I should try to reinstall it again, but I'm new to the iPad and it's software so I don't even know if it's possible...Hi,
Thank you for your reply, I did go to my general settings, but for some odd reason I don't have a restrictions setting, or a reset setting. I thought I could reset all the setting to see if it could be that, but as I said there aren't any.
My husband also has the iPad 2, and also did the software update and hasn't had any problems at all. I took both iPad's and compared the settings thinking maybe there could be a setting that could have been changed when the update was done. -
When i upgraded Firefox from version 3.6 to the next version I got a message about Frames that did not work. I work as a warehouse manager and we use an application called LogTrade when we ship goods. LogTrade was not working with the version after 3.6, I think it was 4.0? I had to reinstall 3.6 to get it working. Since LogTrade is essential for my work I don't know if I dare to upgrade to version 5.0.
You can try this extension to override compatibility issues,
* https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ -
Hi! Why is it that after I updated thru the app center my OS X 10.9 to 10.9.2 (Combined), after it downloaded and restarts, this error occurs, "the version downloaded is corrupted and needs to download again."? I have been repeating the process for more than three times already but the same problem keeps on happening. Please advise.
Try the manual update:
-
For months my husband has not been able to message or FaceTime. Several article I read stated the next update would fix the problem...it didn't. Any ideas?
1. Make sure software is up to date
2. Make sure FaceTime is enabled; Settings>FaceTime
3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
4. Make sure Push Notification is enabled
5. Make sure phone number or email address is correct
6. Hold the Sleep and Home button down (together) until you see the Apple Logo -
Everything is in small print and a different text, I have not done anything different to my computer so I assume that after the last update things have changed but it is not very satisfactory as I have to zoom on every page as there is no 'set text size' now available to me, it is virtually impossible to read the FB page or the Zynga games.
Hi Hoddy,
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
You might want to look into some of the [[Accessibility]] options. There is lots of good information in that article.
Hopefully this helps! -
Problems in XORG after the last update.
My gdm not works after the last update.
GDM open, but when i try login, this panel close and open again.
My xorg.0.log http://pastebin.com/epTaJ1zN
Please help-me !Which graphics driver are you using?
A nice alternative display manager for while you try fix gdm is lightdm https://wiki.archlinux.org/index.php/LightDM
otherwsie:
https://wiki.archlinux.org/index.php/GN … .2B_cursor
https://bbs.archlinux.org/viewtopic.php?id=161900
Last edited by jrussell (2013-06-04 17:01:41) -
Wireless is slow since last update sometimes non responding
Hello;
I don't know what the last update was for leopard but, since I've done the restart from the update my wireless on my 13"macbook is slow and sometimes time out. I have windows xp on it as well and the wireless is fine! Anyone else having problems? I've added opendns to network preferences but no change. It seems to work moderate if I move to a central location of my home I've done nothing to my wireless network setup and where my mac normally sits is about 20 feet from this centralized location. I have full signal at both connections is there a way of uninstalling the last update?Well after reading alot of forums on this topic the topic itself is vague but I found a fix on this website ---->http://installingcats.com/2008/06/05/slow-internet-with-leopard/#directdns_betterdns
I did exactly what he wrote and also changed my router's broadcast to a higher number and I'm getting fast connection now download speed up to 8000kbps and upload 2000kbps
anyone else having this issue please do what the url says pretty easy but try this b 4 u think it is your airport card. -
Last Scan Time vs Last Update Time
All,
I have been using SW to track my Server 2003 boxes as MS will be EOL of these next week. In my Inventory report I include Last Scan and Last Update. As we migrate the boxes to Server 2012 - I had expected to see the 2003 Server OS drop off of the list but that is not happening.
I am getting current "Last Update" (7/13/2015) but the report still says the box has OS Server 2003 and I know it is Server 2012.
What am I missing and the bigger question is - This is for servers only. Do I have confidence that my PC inventory is reflecting the correct updates in my larger inventory?
Any advice would be appreciated.
This topic first appeared in the Spiceworks CommunityIt is my understanding that the 'discovery scan' is just for the initial scan and then there is also an update scan that just checks for differences.
I have my remote collectors to search specific subnets and scan once a week. Ever since the initial scan they all show up during in the inventory. I see most of them being 'updated' in inventory according to the schedule and the timestamp but the "Last Scan Time" never changes. As such my not scanned in 30 days just continues to build up. The "Last Updated Time" gets updated correctly but nothing else.
Is this normal behavior? It doesn't seem like it is considering the Not Scanned in 30 days group exists. It wouldn't make sense for that group to exist if there was no need for a "scan" if "updates" worked just fine.
This topic first appeared in the Spiceworks Community -
Last update of Adobe Flash Player for Safari
Adobe flash player last update downloaded and installed but still it doesn't work with Safari. Pls advice as I don't see Adobe in the list of my programms. I followed this instruction http://support.apple.com/kb/ht5655 and it was successfully installed
If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 5.
1. If you're only having trouble with YouTube videos, sign in to your YouTube account and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
2. If you're getting a "blocked plug-in" error, then from the menu bar select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
3. Triple-click the line below to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
4. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
5. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
6. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
7. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Maybe you are looking for
-
I really need help. For work, I have to take photos of properties and answer questions about these properties on my IPhone 4. This information is entered into an app provided by my work. For each property, the photos are entered under that property
-
Error while Deploying -- Please help !!!
Hi, I am getting the following error while deploying. The components that I have is a html, servlet and Stateless session bean, basically I am executing chapter 2 of developing Enterprise applications "A Simple Session Bean". The error is as follows.
-
NO Cursor scroll through any message thread using the track pad in the BB Classic
It very strange to know that I didn't find the cursor while i will scroll through any message thread i.e. Text msgs and in Whatsapp it will only selet the whole msg or multiple msgs rather then specfic text required, using the track pad in my BB Cla
-
Firefox stalls whenever in Yahoo e-mail; Windows XP unable to shutdown
When I am in my Yahoo e-mail account, firefox stalls. The page does not budge. I have to close Firefox and when I try to restart, it says that Firefox is already running. I am also not able to shutdown the Windows.
-
Bug: Can't export to desktop directory
Windows XP SP2, Finnish version. Lightroom tells that my desktop directory (and any directories on the desktop) is unwritable when I try to select it ( "The specified folder is unwritable"). I guess I really should get rid of the nasty habit of popul