I did the update and now cant open itunes i get a error 7  windows error 198

I did the update and now itunes wont open...I get a windows error 7 (windows error 198)  HELP

Hello there, thumerick.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

  • I downloaded the new update, and now cant open itunes

    I recently downloaded the new itunes update, now cant open itunes, redownloaded atleast ten times, still cant open it all i get is an error message, reinstalled the itunes i had before the update, that wont open either, so i deleted itunes and went to redownload it, still cant open up itunes or download it

    Hello there, thumerick.
    The following Knowledge Base article addresses the very issue you're describing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Downloaded the latesty update for itunes and now cant open itunes at all keep getting a file missing error whats doing on ????????????

    installed latest update of itunes and now cant open it at all i get a message saying theres a file missing and i need to re-install itunes but after the 6th time its still the same ,getting really ****** off with it now !!!!! HELP!!!!!!!!!

    Hey crebely!
    I have an article here for you that may help you troubleshoot and resolve this issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • HT201263 i did the update and now my phone is locked.  I tried the restore through itunes and it said unknown error occured.  what now

    I just did the upgrade and now my phone is locked.  As I have never locked it before, I don't know what to do.  I tried the recover through itune that att walked me through and the message came up that it was unable to restore.  Now what do i do?

    http://support.apple.com/kb/TS3694

  • HT4623 I did the update, and now I don't know how to close an app when I'm done with it

    I did the update and don't know how to close apps that are open

    Force close apps
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe the app's windows upwards to close
    3. The app will fly off the screen
    http://support.apple.com/kb/ht5137

  • We did the update and now 2 of our phones seem to be connected. Texting show and everything!!

    We updated all 3 IPhones. My daughter Iphone seems to be connected to my wifes phone now. When she gets or send a text she gets it on her phone... Help?!

    I did go in and check and my number is checked and the other phone is not. I will check his phone tonight. It's driving me crazy. Thank you

  • I deleted something and now cant open itunes

    I dunno what I did, My computer has been experiencing what I believe are hacker symptums, I may have deleted something required to open itunes, cause that wont open. The files on the desktop used to have text under them, now its squeezed too small to see and stretched. Files dont open and say"Content" instead of having any of the original files in them, and I believe that my computer says that I am a part of a network when I never advised this. The network folder is empty... But mostly I am confused, and irritated. Love the Apple products, happy with it... Just confused.
    I ran "Repair Permissions" the only thing that came up was "unable to repair permissions in SIUD file." Please help IFeelDuM DuM DuM.
    Thanks, and keep them Apples growing and I will keep picking them. [snicker]

    Paulietang do you know what files were deleted?  Which Adobe software or service gives you the error?  Have you tried removing and reinstalling the application?

  • Just did the update and now home sharing isnt working. Im getting error -9808. Any ideas??

    I have no idea what is happening. My wifes library shows up on my account as does mine on hers and songs will play but we cant drag them into the library. When I o to turn on home sharing on my account it hits me with error code -9808.

    tileguy29 wrote:
    error code -9808.
    "Error -9808"
    This alert is often caused by a perceived security issue due to higher than expected security settings.
    Check your computer's date, time, and time zone. If they are not correct, correct them.
    If the issue persists, or the changes made to Internet Options revert after restarting your PC, then the issue is likely caused by out of date or incorrectly configured security software.  Follow the steps in iTunes for Windows: Troubleshooting security software issues to resolve the issue.

  • OK - I just did the update and now when I bring up a second screen the Back Page, Reload and Stop loading does not work. So I guess I'll install the previous version. Anyone else having this problem?

    It's version 3.6.12. Anyone else having this problem?

    You have to download and run the upgrader then launch iPhoto. Go to the utilities folder in Applications and launch the iPhoto upgrader. Then launch iPhoto and it will upgrade the library
    LN

  • HT4623 i have already did the update and the i clicked on install now then they told me that the phone is oing to restart and it didn't work the apple signe is always appearing

    i have already did the update and the i clicked on install now then they told me that the phone is oing to restart and it didn't work the apple signe is always appearing

    Reset, hold both home and power buttons for about 10 seconds until the iPhone restarts itself. If still problems, Restore iPhone again with iTunes on computer. If you have trouble, put iPhone into Recovery Mode. Open iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, click Restore button of iTunes.

  • TS1389 Hi Since the last Apple update, every timr i open itunes I get the Welcome page and have to agree to share my libaray. before the update I only had to do this once. Now its every time. Any solutions?

    HI Since the last Apple itune WIndows update every time i open itunes I get the Welcome page and have to agree to share my library. Before the update i had only done this once. Now its every timre i open itunes

    Copied from your previous post.
    You are right the Iphone is locked into the carrier softbank from Japan and its not the 3g model its the one before it, I am not sure what model.
    If your iPhone is not the 3G model - it is the one before that, this means your iPhone is the first generation iPhone or the original iPhone, which WAS NOT sold officially by Apple in Japan. The first generation iPhone was sold officially by Apple in the U.S. as carrier locked with AT&T, in the UK as carrier locked with O2, in Germany as carrier locked with T-Mobile, and in France as carrier locked with Orange and as officially unlocked by Orange. The ONLY country where the first generation was sold as officially unlocked was in France, which is required by French law.
    The original iPhone - the one before the 3G was not sold by Apple in Japan directly or through Softbank.
    Did you purchase your iPhone from Softbank or from an Apple store in Japan ? If so, this would also mean your iPhone is carrier locked with Softbank since the iPhone is sold in Japan officially as carrier locked with Softbank only, and this would be the 3G or 3GS, not the original iPhone. This would also mean you are roaming internationally with Softbank with your iPhone in China. If you are using a SIM card from a carrier in China with your iPhone, your iPhone has been hacked to be unlocked unless you purchased your iPhone from an unofficial source in Japan which was sold originally as new officially in France as officially unlocked by the carrier Orange in France.
    Is your iPhone is carrier locked with Softbank in Japan, are you paying Softbank international roaming fees while using your iPhone in China?

  • HT4623 I did the update, but now I can't open any of my apps. What am I suppose to do?

    I did the update, but now I can't open any of my apps. What am I suppose to do?

    If it's the apps that you've downloaded from the App Store that aren't working, whilst the built-in apps are ok, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.

  • Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

    Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I just downloaded the updates and now my mail doesn't work. It says I now need a newer version of OS to allow I've to open my mail which I can't right now

    I just downloaded the updates and now my mail doesn't work. It says I now need a newer version of OS to allow I've to open my mail which I can't right now

    What version of the OS X are you running? Go to the Apple in the upper left corner and select About This Mac and report the Version back here.

  • I recently did the update and my text message notification was no longer working. Then I did a reset and now my locking function no longer works. What is going on???

    I recently did the update and my text message notification was no longer working. Then I did a reset and now my locking function no longer works. What is going on???

    What "locking function" are you talking about?

Maybe you are looking for