I didn't ask for firefox 5 and there are 2 add ons that it isn't excepting that I can't find

I may have been offered fire fox 5 but did not accept the offer and it is on my computer when I started it up this am and there are 2 add ons it says are not compatable that i tried to locate to remove them and can't find them

Me again,
A friend suggested that I do a system restore.
I did a search for system restore in Windows 7 and got a very intuitive menu.
I selected an earlier system restore point and executed the restore.
After the computer restart I reloaded Firefox 5.0 and the Ask.com problem was corrected.
My friend says this approach may work about 25% of the time to fix this kind of problem. In my case it worked and I am happy.
Thanks all.
Richard Ryer

Similar Messages

  • Problems with my Apple id since 2 weeks: i received for 3 times a mail from Apple who said: you're password was reseted but i didn't asked for reset. So i have to re-change my password again. How can i be sure my account is not hackd

    hi everyone,
    since 2 weeks: i received for 3 times a mail from Apple who said: "you're password was reseted..." but i didn't asked for reset. So i have to re-change my password again. How can i be sure my account is not hacked ?
    Best regards.

    I'll add my problem to this list as it sounds similar. First a little background. This is a problem I think we will see from a lot of long term users, so here is my story. When .Mac was first made available I signed up and was given a new apple ID [email protected] At this point I already had an Apple ID that I was using for just music purposes (apps didnt't exist yet) but was told by apple I would have to give it up. They could not merge IDs and would not change them. The end result was getting a new Apple ID and having to redownload all my purchased music over P2P or burn it and  re-rip to remove the DRM. Fast forward a bit to a time when Gmail is getting bigger. I'm invited to try it out and I decide that I'm going to stop paying $100 for email, as I never really used he other features iDisk, photo sharing etc, and syncing contacts, calendars and mail was just as easy through gmail. Now years later we have iCloud. I have to sign in with my outdated .mac ID, at this point I have for too many apps/music/shows to drop that ID. When I sign in with that .mac Apple ID I get the automated iCloud message telling me my new email address is [email protected] However when I go to send email from my iCloud account it is using .mac as the sending address and the mail will not go through. I can't change it in the mail app or in settings. I'm kind of at a loss as to where to go next. I'm stuck with a defunct email address as a username that is more or less a key to thousands of dollars worth of content, and a new email address that won't function and nobody at Apple can press the right buttons to help clean it up. Some kind of system should be in place to change a user ID. Maybe once a year or once every other year. **** at this point I would even pay a one time fee just for my user name to be rid of that old .mac extension.

  • Firefox process does not stop. Reset Firefox and Restart with Add ons disabbled is also not working.

    I always need to stop firefox in the task manager.
    Resetting and restarting without add ons is not possible because Firefox hangs on shut down.

    Hi, I was experiencing the same problem since a couple of weeks. I am on Firefox 18, WinXP SP3.
    The way I got rid of it was by '''removing a file called secmod.db ''' in my firefox profile directory. Firefox recreated the file and the problem is gone.
    By default the profile directory on WinXP is C:\Documents and Settings\your_username\Local Settings\Application Data\Mozilla\Firefox\something.default
    I guess on Windows Vista and up, the folder is somewhere below c:\users. Doing a search for .default might help you find it. I think it is a hidden/system folder though, so you might want to turn their visibility on.
    Hope that helps

  • Thunderbird 31.3.0 Mac Yosemite. Thunderbird does not ask for password, when there are no passwords saved

    Have deleted account.
    Created new existing mail account, enter server details, click test - the server details are found automatically. Then enter password and click ok - then Thunderbird hangs forever while saying that password is ok.
    Alternatively - create new existing mail account without entering password, click ok, then procedure goes through, and the email gets created. However, it never asks for password. Even upon restart of Thunderbird and machine. There are no passwords saved under security settings
    Please help

    Also I forgot to mention, I have nulled out the known_hosts file to eliminate any conflicts there, I have verified .ssh is 700 and files config and known_hosts are 600
    output using ssh -v
    debug1: Reading configuration data /Users/<me>/.ssh/config
    debug1: Reading configuration data /etc/ssh_config
    debug1: Connecting to pshx4105a [216.255.177.213] port 22.
    debug1: Connection established.
    debug1: identity file /Users/<me>/.ssh/identity type -1
    debug1: identity file /Users/<me>/.ssh/id_rsa type -1
    debug1: identity file /Users/<me>/.ssh/id_dsa type -1
    debug1: Remote protocol version 2.0, remote software version OpenSSH_4.5p1 FreeBSD-20061110
    debug1: match: OpenSSH_4.5p1 FreeBSD-20061110 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_4.7
    debug1: SSH2MSGKEXINIT sent
    debug1: SSH2MSGKEXINIT received
    debug1: kex: server->client aes128-cbc hmac-md5 none
    debug1: kex: client->server aes128-cbc hmac-md5 none
    debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<1024<8192) sent
    debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
    debug1: SSH2MSG_KEX_DH_GEXINIT sent
    debug1: expecting SSH2MSG_KEX_DH_GEXREPLY
    debug1: Host 'pshx4105a' is known and matches the DSA host key.
    debug1: Found key in /Users/<me>/.ssh/known_hosts:3
    debug1: sshdssverify: signature correct
    debug1: SSH2MSGNEWKEYS sent
    debug1: expecting SSH2MSGNEWKEYS
    debug1: SSH2MSGNEWKEYS received
    debug1: SSH2MSG_SERVICEREQUEST sent
    debug1: SSH2MSG_SERVICEACCEPT received
    debug1: Authentications that can continue: publickey
    debug1: Next authentication method: publickey
    debug1: Trying private key: /Users/<me>/.ssh/identity
    debug1: Trying private key: /Users/<me>/.ssh/id_rsa
    debug1: Trying private key: /Users/<me>/.ssh/id_dsa
    debug1: No more authentication methods to try.

  • My iMac has a1T hard drive,and it is full!. So i look for archives and there are 6000 mailrecoveredfrom gmail, and i can not erase them. Is it a virus? What can i do?

    My iMac has a 1T hard drive and it is full ! So i look for the archives and there are6000 mails recovered from gmail and i can not erase them. Is it a virus?
    What can i do ?

    It sounds like a runaway process is filling up your volume.
    Boot in safe mode. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable, and remove all aftermarket expansion cards. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including your login items.
    Use a tool such as the one linked below to explore your volume and find out what's taking up the space:
    OmniDiskSweeper - Products - The Omni Group

  • Can't logon to Match on iphone 4s.  asks for ID and P/w.  ID it displays isn't complete, therefore password is incorrect.  Also says I'm not subscribed to Match, which I have been for 2 days.  Can anyone suggest anything.   Thanks.  jwbsr

    Purchased 'match' 2 days ago and since then I have been unable to turn on i-tunes match in settings on my iphone 4s.
    When I tap the switch to turn on match, I'm prompted for ID and P/w.  The ID on the prompt isn't complete, therefore when I enter the password, it isn't accepted. Also, sometimes the response comes back that I'm not subscribed to Match and go to my computer to subscribe.  I'm  completely lost at this point.
    Been playing with for almost 3 days.  Can anyone suggest what I could do?    Thank you  jwbsr...

    You must sign into the mobile iTunes Store with the same iTunes Store account ID you used to purchase iTunes Match. So... when you are prompted, if the information already in the text field isn't correct change it so it is.

  • I was able finally to delete unwanted text boxes in my document; however, now my second page is missing and there are several following pages in a language that appears to be Latin.  What sin have I committed and how do I atone to get my second page back?

    I was able finally to delete unwanted text boxes in my Pages document; howver, the result is that the 2nd page of my document is missing and there are now several following pages in a language that appears to be latin.  What sin have I committed and how do I atone?

    10 marks for recognising the Latin (sort of) that is the placeholder text in your template.
    You are using a Word Processing template. WP templates have content flowing from page to page. As one page fills up, a new one is created. If some of that text is deleted or displaced the pages retract.
    When you combine text, invisibles like word spaces, returns, tabs, page breaks etc with objects that have text wrap set, the mix can behave in an apparent odd fashion.
    Start with showing where everything is:
    Menu > View > Show Layout/Invisibles
    Start with getting rid of any excess returns you may have used to "position" things. Next cut and paste objects like textboxes, shapes, charts and tables "Inline" ie in as part of the text. If necessary also turn off text wrap on objects or minimise it so that doesn't push text completely out of the way.
    Insert Section breaks in the Text where you want fixed breaks in the layout these will provide separation between layout on different pages.
    Basically you need to clean up your layout or think about doing it another way.
    If there is a lot of layout, you will need to learn Pages methods for doing this in a WP template or do it in a Layout template where each page is individual and all objects are floating with no default text area.
    Peter

  • Am I billed for periods where there are no events?

    Assume I have a dev/test scenario where there are long periods of time when I'm not actively testing my code. If I have running jobs waiting for input and there are no events, am I billed for that time?

    There are two meters for which your Stream Analytics gets billed [1]
    (1) Data ingressed by your streaming job
    (2) CPU memory used by the running job
    http://azure.microsoft.com/en-us/pricing/details/stream-analytics/
    So if you are not sending any events you will not be billed for (1) but you will still be billed for (2) since you have a streaming job that is allocated and running.
    You will have to STOP your job in order to avoid getting billed at all
    Thanks
    Zafar Abbas

  • IPhone 5 stuck on home screen and there are codes at the top??

    So I plugged the phone in and it started charging like it should. When it had enough juice the Apple logo flashed and it should'be pushed me to the main screen of my iPhone. Instead it stayed on the start up screen with the apple logo and there are codes at the top of the screen that start with [nand]. There are about 10 rows of it. What should I do?

    This error is hardware related and you should get the phone serviced by visiting an Apple Store or an Authorized Apple Service Provider.
    iPhone - Contact Support - Apple Support

  • Firefox will not remember passwords even tho the box is checked and there are no exceptions listed. The little bar asking to save passwords doesn't even come up.

    After an online session, Firefox (6.0.1) crashed and a crash report was sent. After that, Firefox would not start and the crash window kept coming up. I uninstalled it and did a new install. It works fine now except it will not remember passwords even tho the box to save is checked and there are no exceptions listed. The bar asking to save does not come up.

    Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Permanent Private Browsing mode"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]

  • I have set reminders of birthdays for 2013 opting for yeARly reminders however only three of them are showing for 2014 and rest are missing can someone help, while i called up customer support they asked me to reset the phone which as well didn't help

    I have set reminders of birthdays for 2013 opting for yeARly reminders however only three of them are showing for 2014 and rest are missing can someone help, while i called up customer support they asked me to reset the phone which as well didn't help

    Tina,
    I would go crazy if this was me.  You may find this interesting from the customer agreement (to see full agreement go here:Customer Agreement | Verizon Wireless):
    "HOW AND WHEN CAN I DISPUTE CHARGES?
    If you're a Postpay customer, you can dispute your bill within 180 days of receiving it, but unless otherwise provided by law or unless you're disputing charges because your wireless device was lost or stolen, you still have to pay all charges until the dispute is resolved. If you're a Prepaid customer, you can dispute a charge within 180 days of the date the disputed charge was incurred. YOU MAY CALL US TO DISPUTE CHARGES ON YOUR BILL OR ANY SERVICE(S) FOR WHICH YOU WERE BILLED, BUT IF YOU WISH TO PRESERVE YOUR RIGHT TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING SUCH DISPUTE, YOU MUST WRITE TO US AT THE CUSTOMER SERVICE ADDRESS ON YOUR BILL, OR SEND US A COMPLETED NOTICE OF DISPUTE FORM (AVAILABLE AT VERIZONWIRELESS.COM), WITHIN THE 180–DAY PERIOD MENTIONED ABOVE. IF YOU DO NOT NOTIFY US IN WRITING OF SUCH DISPUTE WITHIN THE 180-DAY PERIOD, YOU WILL HAVE WAIVED YOUR RIGHT TO DISPUTE THE BILL OR SUCH SERVICE(S) AND TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING ANY SUCH DISPUTE."
    This may help you also: Arbitration and Mediation FAQs | Verizon Wireless
    You can dispute any charges by doing an Arbitration or Mediation.  I have never done it, so I can not help much there but this all may get you started.
    Let me know if any of this works! Good Luck! Please keep me updated. I really hope they help you.

  • Most of the time, when I hit a link, it opens but tabs with ads or pages that I didn't ask for are opening also and they come up on top. I have to dump them t

    Most of the time, when I hit a link, it opens but tabs with ads or pages that I didn't ask for are opening also and they come up on top. I have to dump them to get to the link I originally hit. How can I stop this from happening? It's so irritating and they take a while to come up before I can close them. Note: I use Firefox for Mac OS

    You can stop that behavior by changing two settings within the browser. Go to Tools -> Options and click on the CONTENT button. Make sure that "Block pop-up windows" is checked. Then click on the ADVANCED button on the far right and add a check to "Warn me when websites try to redirect or reload".
    That should stop most of them. If not all, then you could install AdBlock Plus add-on, since most of the redirects are ad generated. (Tools -> Add-ons -> Get Add-ons)

  • HT2534 When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

    When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

    You can create an iTune and App Store account without credit card details
    1. Sign out of current Apple ID if you are sign-in to one (important)
    2. Go to App Store and select a free app
    3. Tap INSTALL APP
    4. Create New Apple ID
    5. Confirm Your Country
    6. Agree with Terms and Conditions
    7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
    8. Create and answer your secret question
    9. Select NONE for Payment Method
    10. Fill in Billing Address
    11. Submit application for new Apple ID
    12. Wait for verification email
    13. When email arrive, verify your account
    14. Start downloading your free apps

  • Not being asked for credentials in SSRS 2008 R2 for Firefox and Safari

    I have an instance of SSRS 2008 that is currently working on all browsers (the URL is something like reports.foo/reports).
    I spun up a new instance of SSRS and placed it on the url report01.foo/reports.  This new instance is connected to a different domain (I am spining up a Active Directory Domain and trying to build out our infrastructure, so the logins are different). 
    I am able to access the new URL (report01.foo/reports) from IE and Chrome.  It is asking for the username/password and able to get on just fine.
    However, when I try to go to the new URL (report01.foo/reports) using Safari and Firefox, it never asks for credentials and shows a blank page.  This does not happen for the old URL (reports.foo/reports), only the new URL.
    Any ideas?

    Hi Ben,
    Per my understanding that you have configured windows authentication and which by default will not prompt for credential. So I assumed you have changed the User Authentication setting in the security setting to pop up for credential, for example like below(IE),
    If so, your issue about the pop up credetial not pop up in Firefox and Safari can be caused by the related security setting, If you give Anonymous User rights, you may got the blank page:
    Details information about similar issue in threads below for your reference:
    how to change reporting service site seurity setting?
    SSRS in firefox not asking for credentials
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • Hello hi, i just won't to ask, if there has been any changes on how to find a stolen phone, did some one come up with a fare and good solution. as it is not fare at all when some one could use it for free and there is a lot of things could be done to this

    hello hi, i just won't to ask, if there has been any changes on how to find a stolen phone, did some one come up with a fare and good solution, new Apps. as it is not fare at all when some one could use it for free and there is a lot of things could be done to this condition, no one seem to care,
    i have a story about my sister, am talking on her behalf, she got stolen her phone at a caffee when she just come from a horeble exam, she was very mad and having haedace for not doing well at the exam, i ask her if we could have coffee before we go home, once she sate; while i was getting the coffee for her, some one snicked to her pocket and took the phone, immidatly she feelt it and went on to searching, but nathing was hopefull. what makes it more heart braking is that she worked day and night just to buy the phone and pay for her books and so on as a student. she use to work 16 houres a day before she had to start school. 8 houres in one place and then to the other place. and she was always demanding for more houres to work; one day her boss saw her on her other job and she was serprised to see her and saied OHhh my God Milly if you work like this, i wonder if you servive, how could you also ask for more houres, My sis had to do it she has no parents or any thing, well the phone was taken after only two months of having it. the sad thing is she stile dream having it even though she can't think of buying againe. well me i have tryed a lot of things but i know some were out there there is a solution for people like this, it is not always fare for some one who has payed up to 800 to just loose his ......  
    Thnks

    I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
    I hope she gets her phone back.
    Best of luck.

Maybe you are looking for

  • Can you set a 4x6 default crop size in iPhoto 11

    I was wondering if you can set a default crop size to 4x6 in iPhoto 11.  I have looked different places and can't seem to find out how if you even can.

  • Can I get the Apple IBook Author on the New IPad

    Will the ibook author be available for the new iPad? I've got a MacBook but its easier to use the iPad because of a disability. I use an ibook creator on the iPad at the moment, but I would much prefer to use the Apple Ibook creator. I haven't actual

  • Linksys WRT 300n Problem

    Perhaps you can help me. When I connect the router to my modem and computer I use the cdrom and do the setup. After a few seconds I see that the wizard tryed to find the router. I get then the message   unable to find the router. Check your cabel. Th

  • CS5 extended and 3d .obj files containing clip maps

    Hi, I've modeled some 3d vines using a standalone program that outputs .obj files. I would like to export some .pngs with transparent backgrounds for use in my 3d program (sketchup) - the 3d vines are a great deal of geometry I don't need except in o

  • MCSI , Info structures

    Hi there, I want to read data from info structures like S920, S943, S948 etc. but i have too few key fields as parameter and each of these tables aproximately contains 20 million lines. As a result, it takes a lot of time for my 'SELECT' sentence to