I didn't get mail from DAC
Hi,
I didn't get mail from DAC after the end of running an execution plan,
Although I get test mail form DAC.
I've tried to define my self with each level, but it doesn't help.
Does anyone know how the problem can be solved ?
Thank you
1. Verify the Email Configuration ( Tools--> ETL Management--> DAC Server Setup)
Send a 'Test Email'
I get a 'Test Email'
2. Add Email Recipients with Notification Level 1 or 5 or 10 (Setup-->Email Recipients)
Restart DAC Server after Email Configuration. Run a Test ETL and check the status.
I've tested each of Levels and restarted DAC
but it didn't help
Similar Messages
-
TS3988 How can I verify my icloud account without being able to get mail from the account?
How do I verify my icloud account without being able to get mail from that account?
The verification email will be sent to your primary Apple ID email address.
-
I have two different e-mail addresses that I want to get mail from. So the main/default one worked just fine. So I went to options, account settings, identities and set up the second one. But this second one doesn't appear on the start page and still when I Get Mail, it only brings in the mail from the default one. So what do I do?
You do not place your second account in Identities.
You go to the Menu Bar and select '''File-New-Existing Mail Account''' and add it there.
No Menu Bar? Press the alt key.
If using the '''AppMenu button''', click that and select''' New Message-Existing Mail Account''' -
Why won't my ipod let me get mail from yahoo?
My iPod won't let me get mail from yahoo...
iOS: Unable to send or receive email
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Many users report problems with Yahoo mail. -
I am having trouble getting mail from the shaw server that my new iMac is connected to. I have to reboot the system to get Outlook for Mac to access the system and obtain new messages. Any ideas? Its at the point where I have started using the PC again as its less trouble.......
In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
See "Firefox connection settings" in [[Server not found]]
You can find the connection settings in "Tools > Options > Advanced : Network : Connection"<br />
If you do not need to use a proxy to connect to internet then select No Proxy -
Not able to get mail from windows live account.
Firefox can find plugins in several locations, but Firefox 21 changed the location of the "shared" plugin folder so older installers like the Microsoft Windows Media Plugin no longer drop the DLL file in the correct location.
There apparently are two ways to address this:
(1) Change a Firefox preference so that Firefox checks the old location. Here's how:
(i) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(ii) In the filter box, type or paste '''plugins''' and pause while the list is filtered
(iii) Double-click '''plugins.load_appdir_plugins''' to switch its value from false to true.
This will take effect after you restart Firefox.
(2) Copy the plugins folder to the new location. Here's how on Win 7 64-bit:
Open a Windows Explorer window to:
C:\Program Files (x86)\Mozilla Firefox
Right-click and copy the '''Plugins''' folder
Double-click the '''browser''' folder to open it
Right-click and paste
Right-click the new copy of '''Plugins''' and rename it to '''plugins'''
After restarting Firefox, the plugins in that folder should now be available.
''Edit: I suggest just doing #1.'' -
I cannot get mail from my sister who was hacked
I cannot get mail from my sister who was hacked
If your sister's e-mail account was used to send large quantities of spam, and it has been blocked somewhere as a spammer - which may or may not be what happened - it may be difficult to tell where. As I said, any e-mail server between you and your sister could be blocking her messages. A reasonable place to start would be to check with your own e-mail provider and see if their servers are blocking her e-mail. If that is not the problem, she will need to talk to her own e-mail provider about the problem, and they should be able to assist her. Alternately, she could switch to a new e-mail address, which might not be a bad idea, since the after-effects of getting hacked and having her account sending out spam could linger for years.
-
How do I get Mail from my hotmail account?
I was wondering if I could get my mail from my hotmail account right into my mail. Also if I could get mail from an address originally opened on Windows with Outlook Express. Thanks a lot.
The short answer, for now, is you don't. It's increasingly clear that Microsoft does not want to extend this privilege to users of free HotMail accounts, not does it want to offer POP3 access to anyone other than paying HotMail Plus users at this point, and for the foreseeable future. And, IMAP: that's out of the question, apparently.
While the plugin idea is a nice one, the referenced open-source HTTPMail plug in is broken by Mac OS X 10.5, and nothing has been heard to date from the developer about an update to support Mail in Leopard. -
My mail account is set up properly, I can connect to the Internet, but I cannot get mail from the Mail app on my iPad.
Hello echo1946
Start with the first article to troubleshoot the issue of not getting mail on your iPad. When you get online using safari, check to see if you can log into webmail. Also keep in mind, depending on the account that mail sometimes might not come in if it is a POP account as it may have already been download elsewhere.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Mail Settings Lookup
https://ssl.apple.com/support/mail-settings-lookup/
iCloud: IMAP
http://support.apple.com/kb/PH2585
Regards,
-Norm G. -
How to get mail from exchange 2003
can any one help i have a new mac book pro and i wont to get mail from my companey
we use microsoft exchange server 2003 help help help pleaseHello metalcraft,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
OS X Mountain Lion: Cannot connect to Exchange server in Mail after upgrading
http://support.apple.com/kb/TS4363
If you have issues connecting to the Exchange server or don't know what server addresses to use, contact your Exchange administrator or IT administrator.
Best of luck,
Mario -
How to get mail from POP3S or IMAPS server
I have problem to get mail from pop3s or imaps potocol by javamail api.
Help me please!Please refer the link http://www.javaworld.com/javatips/jw-javatip115.html. This could be the solution to your problem.
-
How do I stop the message "Cannot get mail. The user name or password for iCloud is incorrect" from popping up 2-4 times consecutively every time I choose MAIL on my iPhone 4, 7.1.1 I have to select "OK" 2-4 times each time before I can read other email accounts. I used to have an "@me.com" account which I think was automatically changed to an "@icloud.com account." I opened a new iCloud.com account yesterday because I could not figure out how to get in the old ones. I want to delete the original @me & original iCloud account. When I try to delete the account, they tell me my DOB is wrong. I just want those pop ups to stop. Thanks in advance for your help.
Hi Suzanne,
It sounds like you’re running into a password issue with an older Apple ID that’s setup on your iPhone, which is preventing you from removing an iCloud account from your device. Take a look at the article linked below, it outlines all of the possible ways to change an Apple ID password.
If you forgot your Apple ID password - Apple Support
After you enter your Apple ID, there are three ways you can change your password:
Answer your security questions. Use these steps if you know the answers to your security questions.
Use email authentication. We'll send you an email that you can use to change your password.
Use two-step verification. If you set up two-step verification, you can use it to change your password. You just need your recovery key and a trusted device.
So long,
-Jason -
How to get mail from Outlook to SAP GUI (workflow)
Hi All ,
How can we get a mail from outlook or personal mail into SAP GUI .
can it be used as an event for 'wait for event step ' in workflow . ?
Thanks ,
Naval bhattHi Naval,
I just want to clarify some areas from your question:
1. Will a workflow be triggered because of the email from Outlook to SAP? Does it always have to start from the Outlook side?
The integration of SAP Workplace (thru Workflow) and Outlook is possible using the Extended Notification (tcode SWNCONFIG). Here, you can send an email from SAP to Outlook then execute a function from your Outlook message and then you will be directed to the tcode of SAP side (SAP GUI).
Regards,
Reymar -
Get mails from outlooks personal folder (.pst)
Hi,
I am using JavaMail to parse mails from the imap server.The application gets new mails from inbox and parses it as required.however i need to modify this to get new mails from a personal folder(.pst)file instead of the inbox on the server.
Any help in this direction will be appreciated.
Thanks,as i understand, you want to pipe that output from
qmail to your java application, that would then do
something to those mails.
but have you figured out what you want to do to those
mails?
javax.mail mostly helps your pogs to speak pop3 smtp
and other protocols, but in your case there's no need
for that, if you just need to parse those messages,
then just parse them.
what seems to be the problem? what to you want to
achieve.Again....I've all ready. I've the script, I've the pipe from qmail, I know how to receive it from standad input...
Could you please send me a little example about how to parse the received mail I'll have in a BufferedReader or InputStream to get subject, from and body (decoding MIME partes if the mail is MIME type ??
This is the problem.
I couldn't found samples or help...
Thanks in advance
xl -
I need to know a couple of things, but y'all may not have all the answers I need.
First, I need to know how to retrieve the mail files from Mail.app and from Entourage 2004. I don't know if this is a valid asusmption, but in my experience with Windows, I know that Outlook keeps everything in a single monolithic .PST file. Is this the case with either Mail.app or with Entourage?
Second, I need to know how to access said mail files in a Linux mail app. The mail from Mail.app is more important than that from Entourage, so it has to take priority. Will I need some sort of converter program, or is there enough similarity between Mail.app and one of the Linux mail applications that I can simply import it? (BTW, I'm running Ubuntu Linux 11.04 on my Linux netbook. I wish there was some way I could get Snow Leopard on here.)
Any advice on any of this problem will be extremely helpful. Thanks.PastorLarry wrote:
I'm running Ubuntu Linux 11.04 on my Linux netbook. I wish there was some way I could get Snow Leopard on here.
Direct install MacBuntu (based upon Ubuntu 11.04)
http://www.oslike.se/
I have it running on one of my single core netbooks.
WIth your other problem, just borrow a Mac temporariy, drag a enclosure to a Apple Store and use one of theirs, they don't mind as they have Deep Freeze installed on all their machines so changes don't stick upon rebooting.
Maybe you are looking for
-
How can I use 3D function in Photoshop CS6 (student package)?
Please let me know how can I use 3D function in Photoshop CS6 (student package)? Thanks,
-
ISSUE WITH LATEST VERSION 7.6.9. QT
I have a quick time movie showing a 360' photograph which had previously worked ok in qt but since installing new version it crashes in every browser.I have uninstalled and gone back to earlier version though this means I can't update itunes. Error g
-
What makes apple more complicated to use, the people behind apple now days or the you have to buy your time spent with an apple product. I have been trying for two days to watch a movie I rented in my macbook pro. Oh yes its downloaded allready, its
-
How to make your application multilanguage
Hi, i have an application under jdev 11g that uses resources bundle for the multilanguage. In my main page the user can choose the language to see. <af:selectOneChoice id="language" value="#{view.locale}" contentStyle="width:16em;"> <f:selectItems va
-
Hi all I am new to oracle fusion. Does anyone know how bpel and esb will communicate if they are installed in different servers? Any suggestions?????? Edited by: user11025005 on Apr 14, 2009 2:00 AM