I didn't have a signal so I restored my iphone 4s but this always comes up "Your iPhone could not be activated because the activation server is temporarily unavailable" HELP PLS!
I didn't have a signal so I restored my iphone 4s but this always comes up "Your iPhone could not be activated because the activation server is temporarily unavailable" HELP PLS!
Try this link for activation problems ...
http://support.apple.com/kb/ts3424
If you had iOS 7 BETA installed, just go to developer.apple.com and log in using your developer account. There are discussions about this issue. Otherwise... for non-developers, I'm afraid you're on your on. Use Google.
Similar Messages
-
Hi
I have tried to restore my i phone 3gs using a USB cable connecting to itunes.The process has gone smoothley but i am now getting this message on my i phone;"your i phone could not be activated because the activation server is temporarily unavailable.Try connecting your i phone to itunes to activate it,or try again in a few minutes.I have been trying and trying again and switched off my firewall too.but still getting this message.Can anyone please advise me?That is almost always because the phone was hacked to unlock it from the original carrier.
-
Have OS 10.7.5. Computer off three days and now message comes that Time Machine could not complete backup because the "/volumes/PH's timecapsulPro.sparsebundle" is already in use. Whats that about?
Two Solutions for "sparse bundle already in use" Error
Simple solution (from Bob Timmons):
1. Make sure that no other Macs are backing up the Time Capsule at the time
2. Pull the power cord from the back of the Time Capsule
3. Count to ten
4. Plug the power cord back into the back of the Time Capsule
If Simple doesn't work:
The Backup disk image ... sparsebundle ... is already in use. -
Please can someone offer me some help in sorting out issues with 2 new iphone 3gs.
I purchased them in mid april this year brand new unlocked.. I had them plugged into my laptop charging and both now are requesting to be restored . Get as far as activatation then i get message
Your IPhone could not be activated because the activation server is temporarily unavailable. I have been to Telstra store 3 times and into the Mac Pro store where i am today
No one is able to help me unless i go to melb sydney or Brisbane!
Any help would be so very much appreciatedThat is almost always because the phone was hacked to unlock it from the original carrier.
-
my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
"Cannot Open Page"
"Safari could not open page because the server stopped responding"
I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network -
Whenever I try to activate my 4th generation iPod Touch bought today, via my home router (Asus) which has a good signal, I get the warning: "Your iPod Touch could not be activated because the activation server cannot be reached." Very frustrating. When I try to activate it via iTunes on my HP laptop, it won't do it either. Very frustrated and unimpressed.
You are running into the activation lock.
iCloud: Find My iPhone Activation Lock in iOS 7
You have to either enter the Apple/iCloud ID and password in order to activate the iPod for use. Or you can try to dissassociate the iPod for that account by:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
If you can't do that you have a nice, thin but expensive brick -
When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnmYou may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0 -
Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years). I plugged it into my pc, it was recognized and the software updated. I created a new playlist and tied to sync the ipod. This ipod had never been used on this pc/itunes since the pc is only 2 years old. When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing. I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs). When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them. Only my recent purchases from itunes do not. When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found." How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!? I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again.
Any help is greatly appreciated.This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.
I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.
-
I cannot play music from my libray on either my external drive or my laptop. I keep getting the same message - "___ song (all of them) could not be used because the original file could not be found. Would you like to locate it?" I have changed the path several times under preferences and it still won't recognize any songs from either my laptop hard drive or my external drive. I can't play any music at all.
I think I've fixed this on my machine. If you look in the ITunes folder there is a subfolder called Previous iTunes Libraries. In my case for some reason this contained the one which had always worked and a new one was in the main folder. I closed iTunes, deleted the new one, and moved the old one back to the main folder, then opened iTunes. It then rebuilt the library and it plays correctly. Hope it works for you.
-
I downloaded the new version of iTunes and now over 100 songs have an exclamation mark beside them and won't play. The message says: "The song ... could not be used because the original file could not be found." How do I get these songs back?
Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.
-
Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enclosing folders." What on earth does it mean? How can I stop this message from appearing?
See here:
I cannot save recent images. -
i bought an iphone 3g but not in a shop and when i turn it on it tells me your iphone could not be activated because the activation server is unavailable what can i do to just have it working legit ?? , please anyone that could help me out
Generally, that means the phone has been jailbroken (hacked). You can try restoring it as new using iTunes. Beyond that, there's really nothing we can advise as jailbroken phones can't be supported on these forums.
See also Lawrence's post in this thread:
https://discussions.apple.com/thread/5186252?tstart=0
Best of luck. -
I have this massage every time close ps cc
Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder.You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0
Maybe you are looking for
-
How to use Hyperlinks in a table
In my JSF application, I have a table that returns a list of customers. I want to have each link pull up the customer details page with the data for the row that the user clicked on. Is there an easy way to do this? I have figured out how to replace
-
'Document store operation failed due to missing authorization'
Hi all, I am getting the error message 'Document store operation failed due to missing authorization' when trying to save the workbook as the existing Workbook after changing the structure for it. We are using the Authorization Hierarchies. What is
-
10.2.1.2102 - UNHAPPY USER !!!
I have downloaded and installed it........ BUT since then the battery lasst half the time it did before, and my contacts are just ONE BIG MESS !!!!! Emoticons in text messages just shows as a '?' I am so unhappy that i am ready to ditch the phone ...
-
Error [2] in bind() call!
hello my weblogic was working perfectly yesterday. then some genius installed some windows updates on my machine and now i get this message whenever i try to run my weblogic server: Error [2] in bind() call! err:: No such file or directory Socket tra
-
Reports in MS Excel Application
Hi, All, We are using Oracle 10g database and forms. We have installed Jinitiator version 1.3.1.22. We are generating some of the reports in MS Excel Application from the Oracle forms. To generate the report in excel format we are using Client_OLE2 c