I discovered this morninhg that bneither Aperure or Photoshop Eleemnts support the raw files rom the new Nikon D7100. I assume others have experienced the same problem?
My RAW files from te new Nikon D7100 camera are not supoported by Aperture or Photoshop Eleemnsts. They bare supported by Nikon software. When will Aperture be updated?
This depends on when Nikon gets around to updating the drivers. It's Nikon's responsibility, not Apple's or Adobe's. Unfortuantely Nikon doesn't have a stellar record of supporting their software or drivers on OS X.
In the meantime you can always shoot JPEG and import that into Aperture. If you shoot NEF+JPEG you can import just the JPEGs into Aperture now, and later on import the matching NEF files. You could also use ViewNX2 to convert the NEF files to TIFF. At least until Nikon gets around to updating their drivers for the 7100 for Aperture & PSE.
Similar Messages
-
I had my Imac27' for about 1 year (I bought it january 2011) , and it worked fine. But two days ago a problem started. The screen is turning black suddently, and it stay like that until I reboot it. It's not cool. The first time it happen it was hafter a very long days of video editing, I tought it was to hot. But now I just started up the Imac and 10 minutes later it happen. And now I transfer my desktop on my second screen, because the one of my Imac is constantly shutting of. What is this? Can I do something about that?
I´ve came across with the same problem and when I look out for solutions I found out that basically I had Three options
1.- Dim the brightness to the first 2 dots (that is the limit for me, anything above that shuts down again my screen)
2.- Replace an expensive part of the screen (about $900)
3.- Try with an external monitor to see if the problem was the screen or something else
What I did was to plug my flat screen to my mac with a Mini Display Port to VGA Adapter
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter?fnode =51
And… Problem Solved! now Im going to buy a Monitor that gonna cost me less than half of the replacement parts, my main monitor will keep siting down if i dim it above the 2 dots but at least I will have the other to work properly
So that´s that, I hope someone finds this helpful
P.S. Sorry if my english it´s not that good -
I can't open the RAW files from my new Nikon D610 in PSE10. Any help for this?
I recently purchased a Nikon D610. I have PSE 10. I can't open my RAW files now and I always shoot in RAW. I've tried everything, but still can't open m,y files in the RAW format. Any help??????
Your most direct choices are:
1) Use the free Adobe DNG Converter 8.3 to create Adobe-DNG raws from your Nikon D610 NEF raws. These DNGs will open in your older Elements Camera Raw plug-in. Be sure to set the ACR compatibly options in the DNGC to support whatever version of ACR you’re using.
2) Buy PSE12, and first download the trial version to make sure your computer can run it properly.
Adobe only adds new camera support to whatever the current versions of their software, and PSE12 was the current version of Elements when the D610 support was added. PSE10 won’t be updated.
Also be sure that you are NOT using the old Nikon Transfer or ViewNX with your new Nikon camera. These older versions of Nikon products change something in the metadata of new camera NEFs that makes them unrecognizable to Adobe software. -
I recently posted a question in the apple forums and received a response that was less than helpful. Unfortunately, due to the options available to me. I was not able to respond to my respondent adequately enough to hope to receive a meaningful answer to my question. is this the norm with apple problems????
If you don't have the reply buttons in the screenshot you might have been timed out. If you started a reply copy it, refresh the page log back in. You get timed out every 30 minutes.
-
Several files i've detect this error or something. One day all elements on my design are vector, even shadows and patterns. I open it one day later and some elements are now rasterized graphics, and impossible to edit again, and obviously, i did'nt do that. This seems to me an error. Somebody has the same problem, or maybe Im doing something wrong? please help.
Are these old files that you edited in CS6 and then just saved (instead of save as)?
-
I've just upgraded my software to 10.8.5 and have discovered this morning that the autofill feature freezes when I try to use it. I have worked through all of the suggestions in HELP. The autofill prompt appears when I start to fill in a form but doesn't then provide the option box to select autofill from my contact card, the autofill prompt remains on the screen and can only be cleared by closing Safari and then reopening it. This never happened before and in fact autofill has been working perfectly up until now.
You can create another iCloud account easily enough, but you will only be able to create a new @icloud.com address to go with it, not @me.com - and you can't transfer your @me.com address from the other account.Creating a new account will have no effect on the existing one.
However you don't need to create a new iCloud account to create an additional ermail address. You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account, move it to another account, or reactivate it if you delete it.
More information on aliases here:
http://help.apple.com/icloud/#mm6b1a490a
While you can delete aliases, you cannot delete the address you created when you opened the account. -
I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit") -
I cannot connect my MacBook Air to a projector - It will not detect a 2nd monitor or display. I am using an Apple made Mini Display port to VGA adapter. As I read online I see that many other peple are having the same problem. Is this an Apple defect!!???? If so it just burst the bubble about how great macs are. I never had a problem with that on a PC. I hope I am wrong. What can you tell me?
Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks. -
i have a seal pack ipad mini 1 wifi and i want to upgrade to ipad mini 2 retinal display wifi is this possible , that apple take my ipad 1 wifi back and give to me new ipad retinal display wifi , i live in india, bhopal city
Your only option is to sell the iPad and then buy the new one.
Cheers, Tom -
"LOGIC PRO X: Disk is too slow or System Overload. (-10010)" This is the message that I was having since two weeks ago with my Logic 9. I updated two days ago to Logic X and I am still having the same problem.
I recently formatted my computer. In other words, I'm not using too much memory of my HD. My Memory Ram is 8GB.dandotcraig wrote:
A week before logic X comes out it starts bugging out... i deleted a bunch of stuff on my HD and cleaned up everything... didnt fix anything... then logic x came out and I though oh i better update that will fix everything... and im still having the same problems... its rediculous.
Umm,, no offence... but what is ridiculous... is you didn't troubleshoot the original problem but instead you assumed it was a LP9 problem so you updated to LPX which is still in its early days and is likely to be less stable than LP9... rather than more so!
So.. Here's the thing....
LP9 was working fine and then stopped working normally according to you. Therefore what changed at the time LP9 stopped working normally?
Here are just a few ideas to think about.. for around the time this started..
Did you update Logic Pro 9... OS X... Drivers for Midi/Audio or other connected devices?
If you did, did you then restore from a backup you made prior to these problems occuring and what happened when you did so? (assuming you do make backups of your system?)
Did you install any new Apps on your Mac?
Did you add a new Hard Drive? How is it formatted?
Did you start recording or creating music in a different way to how you used to before the problem started?
Have you started using a different SI or FX plugin or plugins.. More or different FX for example.. Did you install a new version of a plugin?
Is all your software legal? (Have to ask because some people install all kinds of illegal plugins and whatever else.. and have no idea how the 'cracks' work or what they might affect/mess up/conflict with in the process)
Have you looked at the System logs to see if anything is happening out of the ordinary when you get these messages?
Have you looked at OS X's Activity monitor to see if any app or routine is kicking in hard when you get this issue?
Basically, you need to think about and look for what changed... because something apparently changed to suddenly cause these issues...given you said you didn't have them until a certain timeframe and some of the questions above, I hope, will get you thinking..
....and maybe a few of the others here will come up with other ideas and suggestions to help you...
Good luck and let us know how you got on... -
my ipad will not connect to yahoo or aol mail, anymore. my mother is having the same problem and also a cousin, in a different state. my cousin and i upgraded to ios 6 and my mother did not. i do not understand why this is happening.
I should add that i have also done:
- reset (holding two buttons)
- updated software to latest IOS
- done a full restore to original settings
None of this has solved the problem. -
When I try to skip through a song on my iPhone, it skips through several songs. The songs that are skipped can be played on the same iphone (when I go into to itunes library on my phone), so I know that it's not the song. I have the latest softeware downloaded on both my iphone and itunes. In fact, this only recently started occuring when I reconnected my iphone to my laptop about a month ago to install the new updates on itunes.
I also have an itouch and an ipod, both of which have been updated at the same time as my iphone and they do not skip through songs.Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
BTW this is the iPod touch forum -
Fife days App Store not give it to me the verify code, I made I lot email adress, changed and created the new, still the same problem, and this is second iPad that I bought this month, if not help me I don't know how to deal, thank you in advance, maybe I will go to shop and want my money back
Do you have a technical question for us volunteer users?
-
At first it was the CS4 Adobe suite. I could't launch any application. The computer gave me this "you are not connected" message al the time and said some Java thing was required in order to operate, but was unable to download.
Then Carolyn Samit showed me where to find that Java plugin online and I installed it successfully. I can run any Adobe application again.
This morning I tried to download a new voice in Spanish for my Speech responses and "you are not connected" showed up again, suggesting me to get a diagnose from the Network preferences control panel. When I run the Assistant / Diagnose / Wi fi check up and it asks me to reset the connection from scratch it simply says the computer is not able to establish a connection, even when I already was connected in the first place.
I quit the System Preferences and get online again as simply as clicking the antenna icon in the top Menu and selecting my network signal. Of course I can connect! —And I don't even need to retype the Wep password.
Why do I keep getting this message? Why can't I connect using the Network control panel?
Hope someone can help me, please!Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
In fact there's a new one for HP at the top of the list just now.
You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc. -
This really ***** that they sent out and update to the iPhone ISO6 and I can't send or receive pics! Being that its apple you would think they would know better than to send out a bad update like this! I'm paying for a service and I can even use now!!! I'm very upset! Think about canceling my iPhone 5 order! This is terrible!
Wahhhhhhhhhh! Wahhhhhhhhhh!
Are you over your little tantrum now? Do you want help you would like to continue to act like a toddler?
If you want help, try telling us what happens when trying to send pics. Any errors?
If you want to whine... go somewhere else.
Maybe you are looking for
-
Artifacting on external screen
I use an external screen, but in the last several weeks I have noticed artifacting on the displays (doesn't show when I use the macbook pro alone (e.g. the macbook's screen without the external monitor plugged in). It comes and goes, the artifacting
-
Hi, I wrote a package in Oracle 9i (9.2.0.6.0) that utilizes the logic shown below. declare doc dbms_xmldom.DOMDocument; main_node dbms_xmldom.DOMNode; root_node dbms_xmldom.DOMNode; incident_node dbms_xmldom.DOMNode; item_node dbms_xm
-
Oh My God, I loooooooove Illustrator, BUT: ANCHOR POINTS DRIVE ME CRAZY!!! When I am drawing paths with pen tool, and need to adjust anchor points or handles, they are so small! I work at 1280 rez, and seems that those tiny points were designed to dr
-
ERM5.3 - Is it possible to make Sub Process & Project/Release non-mandatory
Hi All. I would like to know whether it is possible to make Sub Process & Project/Release in Create Role Definition section non-mandatory fields? If so where would I be able to change the config? Thank you. Mike Hannie
-
Opening the Serial Number Selection window
Hello, I have designed a custom form using screen painter, which saves data to a UDT. I want the Serial Number Selection dialog to open when i click on the add button of my user form. How can it be done?