I do have an iphone4s with me and whats happening now is that it is stuck in the "itunes logo". What i did is that i try restoring the phone with itunes but it didnt go through. The process was not successful. An error appeared and it stops the restore.

I do have an iphone4s with me and whats happening now is that it is stuck in the "itunes logo". What i did is that i try restoring the phone with itunes but it didnt go through. The process was not successful. An error appeared and it stops the restore. PLEASE HELP

I did restore my phone last week, it went well. Today, i turned my phone off and turn it back on, now it is stuck in itunes logo and i was thinking that it needs a restore again. Once i tried restoring it, it finishes the "Extracting iPhone Software" part, but after that the error appears. PLEASE HELP ME

Similar Messages

Re: Configure EVO:RAIL .. The Validation process was not successful...

I had a look at your log file - and i'm seeing loads of
05-Mar 18:14:25 WARN ConfigurationServiceImpl:152 - Configuration does not validate (CURSORY): ConfigurationValidation{normalValidationFieldErrors={passwords.vcPassword=올바른 암호가 아닙니다., passwords.esxiPassword=올바른 암호가 아닙니다., vendor.ovfs=EVO:RAIL에서 필요한 QEP 제공 솔루션을 찾을 수 없습니다. ESXi 호스트와 통신할 수 없기 때문일 수 있습니다.}, thoroughValidationFieldErrors={}}.
You need a password that meets SSO requirements for complexity...
These are:
–8 and 20 characters, one uppercase, one lowercase, and one special character. It cannot have any character repeated 3 times in a row)
So VMware1! would be a valid password
Not sure if this is your problem but it stood out immediately...
Regards
Mike

The password is not a problem. ㅠㅠ
What is the vCenter Server on by JSON file ESXi Server is a method that is configured?
Architecture consisting of a ESXi Server by vCenter JSON File...?
what are links in the vCenter Server and ESXi Server?
In the log.
Finding VC UUID ...
06-Mar 18:04:58 INFO HostDiscoveryServiceImpl: 115 - Found: 564d1ed5-70ff-a538-efee-0293e3093ea4
06-Mar 18:04:58 INFO HostDiscoveryServiceImpl: 118 - Finding primary host to extract asset tag ...
06-Mar 18:04:58 WARN HostDiscoveryServiceImpl: 121 - No primary host found!
06-Mar 18:04:58 WARN InitialHostDiscoveryJob: 71 - No initial hosts found.
Why "No primary host found!" ?? ㅠㅠ

"disk was not ejected properly" errors

I have 3 external Lacie drives (all Thunderbolt) connected to my iMac: 2 3TB drives and 1 512 GB SSD.
I back up my internal 3TB Fusion drive to both 3TB external Lacie drives at the end of each day.
(The SSD is used strictly as a scratch disk (I'm a professional landscape photographer). The SSD is always kept on, BTW.)
After I back up to these 2 3TB drives, I always eject them and then turn them off before putting the iMac to sleep. (The only time I have them running is during backups at the end of each work day.)
However, during the past couple of weeks I've been receiving the "disk was not ejected properly" error every time I wake the iMac. I'm 100% certain that each of the 3TB drives was properly ejected before turning them off (and then subsequently putting the iMac to sleep).
Restarting the iMac doesn't change the situation in the sense that every time I thereafter put the iMac to sleep I get the error message upon waking.
Any ideas....?

After doing some further testing, it appears it's the SSD.
With the two separate 3 TB completely shut down, then doing a restart with the only operating drive being the SSD, then putting the iMac to sleep, upon waking I get the same error message.
After contacting Lacie about this they advised taking two specific steps:
(1) switching the polarity of the thunderbolt cable.
This didn't help.
(2) making sure to manually eject the SSD in the Finder before putting the iMac to sleep.
This didn't help either.
I get the same error message upon waking the iMac.
After contacting Lacie a second time (today) they say that it is the Mac OS that's the problem, not the drive. I find this hard to believe, but technically I'm not expert enough to be able to know whether or not they are telling the truth. (I doubt it.)
Although I have done a Disk Utility test of the SSD and everything indeed tests out fine.

HT1430 I have an iphone 3GS, I went to back it up / update apps through my itunes. I did this, but a certain app I download wouldn't work on my phone as "my iphone software needed updating". So I did now I can't restore & my phone shows itunes logo with p

I have an iphone 3GS, I went to back it up / update apps through my itunes. I did this, but a certain app I download wouldn't work on my phone as "my iphone software needed updating". So I did, now I can't restore & my phone shows itunes logo with plug?

Happy to have been of help. Hope all goes smoothly.
BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
https://discussions.apple.com/static/apple/tutorial/mark.html
and
https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards.

Hello, I have Just purchased an iphone 5 2 weeks ago but when I look through my USB power adapter, there is no serial number printed inside the USB opening, can I know is it a fake one?

Hello, I have Just purchased an iphone 5 2 weeks ago but when I look through my USB power adapter, there is no serial number printed inside the USB opening, can I know is it a fake one?

If you purchased it from Apple or an authorized Apple reseller, it's genuine.
If not, it is very likely to be counterfeit and dangerous to use. Counterfeit power adapters often bear fraudulent consumer product safety markings. It is difficult or impossible to distinguish a genuine power adapter from a counterfeit from an exterior inspection, and inspecting its interior destroys the adapter.
From http://www.apple.com/support/usbadapter-takeback/:
If you need a replacement adapter to charge your iPhone, iPad, or iPod, we recommend getting an Apple USB power adapter. For a limited time, you can purchase one Apple USB power adapter at a special price — $10 USD or approximate equivalent in local currency. To qualify, you must turn in at least one USB power adapter and bring your iPhone, iPad, or iPod to an Apple Retail Store or participating Apple Authorized Service Provider for serial number validation.
If in doubt, do not use it.

HT1600 my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?

my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

Could my iphone be harmed in anyway if i went to a hacking website to hack a game hit download but i didnt go through with download it wanted me to enter for a gift could it effect my iphone in anyway

could my iphone be harmed in anyway if i went to a hacking website to hack a game hit download but i didnt go through with download it wanted me to enter for a gift could it effect my iphone in anyway

No.

"Uh oh, this PSD was not successfully processed because it's not currently compatible with Extract."

I'm currently getting this error: "Uh oh, this PSD was not successfully processed because it's not currently compatible with Extract." What would cause a PSD to not be compatible with Extract?

[Sorry, Ostry, for the long delay. This one slipped through the cracks and I only recently rediscovered it]
There is no particular size limit on files; we do have a layer limit but if you were hitting that it would have explicitly told you so.
If you are still having trouble, and you have files that you can share privately with me, I'll be happy to take a look [we take your privacy very seriously and our lawyers won't let us just go snooping in your files :-) so you have to explicitly share them with us]

Cannot get Membership Provider with name RoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.

I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
Has anyone come across this error before?

There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
"Cannot get Membership Provider with name CustomRoleProvider.
", indicating that you may have used role provider name in Membership provider text box or in web.config.
Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
Please refer -
Forms Based Authentication (FBA) in SharePoint 2013
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

My time capsule says it has only 75gb free space but when i go through finder to it there is nothing there. trash is empty by the way.

my time capsule says it has only 75gb free space but when i go through finder to it there is nothing there. trash is empty by the way. i had to delete some things of it as it didnt have enough room and i was backing up too much irrelevant stuff. now it wants to do a complete back up - about 300gb but there is only 75 free. WT

Ok first what u have to do is remove the Time Capsule from the time machine software and make sure the computer does not back up to the time machine. Next go into disk Utility and find the time capsule. Once found, reformat the drive. Then start using it. If you cannot find the drive in Disk Utility, then open a finder window and find the drive in the sidebar. Right click it and find a button within the drop down menu that will allow you to reformat the drive. If you are forced to go to finder and you right-click the drive, you may have to explore all the options within the drop down menu to find the reformat option.

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes. What next? I've not had this problem with other updates requested by Apple.

I have also had the same problem with my Win 7 32 bit computer. I had great help from Apple techs in Montreal and Orlando for 2.5 hours. They helped me remove every trace of Apple products and clean the registry in two different ways. Each install gave the same problem! If Apple techs can't fix it (on some of our machines) then we are really in trouble. They promised to raise it with the "engineers" and get back to me with a solution. I am waiting and hoping. Otherwise maybe version 11.1.5 will have a fix ??

Why cant i download itunes on my windows 7 pc? i used to have it once but it was not updated for a while and got deleted...i have tried to download it on other web browser but all i got was "thanks for downloaing itunes" and nothing happened

why cant i download itunes on my windows 7 pc? i used to have itunes on my pc once but it was not uploded for a while and got deleted...and now i have tried to download it and all i got was "thanks for download itunes"...after that i have tired to dwnload it from another web browser and ive got the same thing.....!!

Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

Error when deploying BPM application: The specified process was not found

Hi,
I was trying to deploy a simple BPM application to a SOA Server, when I got the following error:
[04:55:19 PM] Error deploying archive sca_PRUEBABPM_rev1.0.jar to partition "default" on server WLS_SOA2 [http://myserver:8001]
[04:55:19 PM] HTTP error code returned [500]
[04:55:19 PM] Error message from server:
There was an error deploying the composite on WLS_SOA2: Operation failed - Member(Id=1, Timestamp=2013-07-15 19:30:56.492, Address=myadress:8088, MachineId=15229, Location=site:,machine:soadev1vhn1,process:29545, Role=WeblogicServer):Error occurred during deployment of component: PruebaManual to service engine: implementation.bpmn, for composite: PRUEBABPM: java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct; . Please see the server diagnostic logs on WLS_SOA2 for details.
[04:55:19 PM] Check server log for more details.
[04:55:19 PM] Error deploying archive sca_PRUEBABPM_rev1.0.jar to partition "default" on server WLS_SOA2 [http://myserver:8001]
The log file in the server console shows this:
Error during deployment oracle.fabric.common.FabricException: Operation failed - Member(Id=1, Timestamp=2013-07-15 19:30:56.492, Address=192.168.168.231:8088, MachineId=15229, Location=site:,machine:soadev1vhn1,process:29545, Role=WeblogicServer):Error occurred during deployment of component: PruebaManual to service engine: implementation.bpmn, for composite: PRUEBABPM: java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct; . Please see the server diagnostic logs on WLS_SOA2 for details at oracle.integration.platform.blocks.deploy.CompositeDeploymentCoordinatorMessages.throwOperationFailedOnNode(CompositeDeploymentCoordinatorMessages.java:132) at oracle.integration.platform.blocks.deploy.CoherenceCompositeDeploymentCoordinatorImpl.submitRequestAndWaitForCompletion(CoherenceCompositeDeploymentCoordinatorImpl.java:351) at oracle.integration.platform.blocks.deploy.CoherenceCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(CoherenceCompositeDeploymentCoordinatorImpl.java:214) at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:467) at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:268) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:203) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:147) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:134) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:100) at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:221) at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Restart the server as I found in some pages and even a thread here (https://forums.oracle.com/thread/1557156) is not the better solution, the real issue still unknown. I need to find a solution without restarting the server machine.
Thanks,
AAPDL

That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
Cheers
Glen

If you have an itunes acct that was not set up to share and the lap top it was on is no longer working, is there a way to open up the old itunes acct to get music and photos? This was before icloud was available, can you reset your password?

If you have an itunes acct that was not set up to share and the lap top it was on is no longer working, is there a way to open up the old itunes acct to get music and photos off of it? This was before Icloud was available. Can you reset your itunes password somehow?

iTunes and the iTunes Store won't have anything to do with your photos. Those would be stored only on your laptop unless you made a backup of some sort. If you didn't, and the hard drive in your laptop has failed, then your photos are gone unless you wish to pay a disk recovery service a lot of money to try and get them back.
As to your music, if you purchased it from the iTunes Store you can probably re-download it. Go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time. You can see what content you can download here:
http://support.apple.com/kb/HT5085
You can also re-download content using an iOS device.
For full instructions, see:
http://support.apple.com/kb/ht2519
Regards.

I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed.

I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed. What shall I do ? I tried reinstalling so many times and everything else I could find. Please help!

Hello MArk.wijesinghe,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Best of luck,
Mario

I do have an iphone4s with me and whats happening now is that it is stuck in the "itunes logo". What i did is that i try restoring the phone with itunes but it didnt go through. The process was not successful. An error appeared and it stops the restore.

Similar Messages

Maybe you are looking for