I do i access itunes if it says itunes cannot be read because it was created by a newer version of itunes
i cannot access itunes cause it says it was created by a newer version of itunes but i cant update itunes cause i dont know how to get my administrator's username or password
Never mind sorted it out lol. Somebody did a system restore of a week or so. I had done the update during that time and it was lost. Just redownloaded itunes from the internet and its working fine now.
Similar Messages
-
My iTunes says library cannot be read because it was created by a newer version. Can any one help?
The file "iTunes library" cannot be read because it was created by a newer version of iTunes.
Are you trying to downgrade iTunes?
What happens if you download and install the latest version of iTunes from here -> http://www.apple.com/itunes/download/
WTH. -
itunes will not open; it says it cannot read because it was created by a newer version. HELP!
Unless you just attempted to downgrade iTunes to an earlier verison this is probably a sign of a corrupt library.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2 -
Downloaded the newest version of itunes and now I can't access any of my library. It says The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. Anybody know what to do?????
I got that Exact message... I think I updated my version of iTunes and it worked correctly.
Hope this helps... -
I just installed iTunes on my new laptop. When I click on the desktop icon I receive a pop up that says "The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes". I have no idea what this means or what to do about it. I can't even find a file on my computer like the one referred to in the pop up. I am currently considering keeping my old laptop if it is the only way for me to continue to access iTunes. What should I do to fix this?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future. -
I receive the message: The file "iTunes library.itl"cannot be read because it was created by a newer version of itunes. I do not know exactly what this means. I have Windows 7 on my computer and was able access itunes until just recently. I have tried uninstalling and reinstalling itunes multiple times and that does not work. Sometimes I can get in when immediately after installing, but then if I close it, i cannot get back in. Now, i can't get in at all.
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
My iTunes won't open on my laptop. Error message says The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes. Help Please!
See Empty/corrupt iTunes library after upgrade/crash.
tt2 -
I cannot open iTunes. I get a message that says "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"
I downloaded it and it and I continue to get the same message.
How do I fix this? Thanks, DeeUpgrade iTunes to the latest version. It should be 10.5.3.
-
"The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?
this just started w/ me yesterday. I was running 10.5.3, and nothing changed - the message just appeard out of nowhere. I update to the latest iTunes 10.6 but the message is the same.
Sounds like probably some sort of Library file corruption.
The two options available in the message box are "Download" and "Quit". Download is useless because I'm already running the latest. Quit is pretty useless.
I was going to just create a new Library and re-import all my music. Of course, all my iPhone sync settings are going go have to be recreated. -
I cannot bring up iTunes as it keeps saying, "the files 'itunes library.itl' cannot be read because it was created by a newer version of iTunes". I have reinstalled itunes, and still no luck. HELP!!!!
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
When i try to open itunes i get a message that says the file "itunes library .itl" cannot be read because it was created by a newer version of itunes
Upgrade iTunes to the latest version. It should be 10.5.3.
-
When i try to open itunes, a message pops up saying "The file “iTunes Library” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?." I have tried downloading the newest version of itunes but it still won't open. What should i do?
Update your copy of itunes to the current version.
-
After years of using iTunes on my G4 suddenly it won't open. Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes". What do I do? I have been attempting to move my Library to a newer MacBook Pro.
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
I had to reinstall iTunes cause during update it was shut off by mistake, now it won't come up and says,"The file "iTunes Library .itl" cannot be read because it was created by a newer version of iTunes", what do I do?
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
When I plug in my iPad 2 to my laptop to sync, it says "the file iTunes library itl" cannot be read because it was created by a newer version of iTunes. Can someone please tell me what this means? How do I correct it? Thanks!
The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
Try the following user tip:
Empty/corrupt iTunes library after upgrade/crash -
Whenever I click on the Itunes icon, a window pops up saying that `The file iTunes Library.itl cannot be read because it was created by a newer version of iTunes`. I then click ok and the pop up vanishes. Any ideas as to what I should do?
What version of iTunes are you using? An .itl file is something that Windows uses, or very old versions of iTunes on Mac. The library file on Macs is now .xml and has been since late iTunes 4.
Is iTunes running ok without any problems after you OK that message? If it is, then you may be able to ignore it if you can't account for why you're getting it. But make sure you take backups in case something happens in the future.
Maybe you are looking for
-
Problem with "Create Transport Request"
Hi all, Iu2019m working with Solution Manager and Charm. I have a problem when I create a transport request. After that I put regular correction into status u201CIn developmentu201D I choose u201CCreate Transport Requestu201D from the menu but the sy
-
Hello all, At a client site am using Pooled capacity at Work centers(SAP resources) to help capacity planning with some pooled resources. So during planned order scheduling or in production(process) order the time required to complete the operation i
-
hi, when my macbook air Going to sleep the device still working and not really in a state of sleep so happens that the battery is over me at night and left with a few percent in the morning
-
How to assign script to menu item? (JS, CS3)
Hi All, I can't find out how to assign a script to a menu item. Instead of clicking a script name in the script panel, I want to appear a menu item in the menu bar. When I click that name on the menu bar I want a certain script to run. I've managed t
-
Cannot open PDF files - generated response says I have to accept Licence Agreement. How?
Cannot open PDF files. Message generated says "Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User Licence Agreement, then Quit and relaunch the browser." Surely I must have accepted the Licence Agreement