I do I make a lion boot disk?

I want to install a fresh clean copy of lion on a new 750gb hard drive. But I don't have the recovery disks. Is there a way that I can backup the operating system only. I don't want no files, no previous data just the operating system & iLife.

Follow these steps to create a bootable Lion disk.

Similar Messages

I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk?

I used my snow leopard disk to erase my hard drive. Now I want to eject the snow leopard disk to clean install from the lion boot disk I made. How do I eject the snow leopard disk? It is the start up disk and I can't figure out how to get it out of the computer so I can put my lion boot disk in. Thanks

turn the mac all the way off. turn the mac on by pressing the power button. as soon as the apple logo appears, pres and hold your mouse button(trackpad mouse clicker etc...) until the CD comes out.

How to create a Lion boot disk for Lion on a MBPRD?

I have a unique version of Lion on my MBPRD. How do I create a Lion Boot Disk for this unique version?

Why is it a Unique version of Lion? The only versions of Lion are ones for older Macs, Before the Mid 2012 models came out, and a version that includes the newer drivers for the newest model Macs, Current shipping Mid 2012 models.
If you are talking about a version for the new Mid 2012 models then you will need to wait for Apple to update their Lion Download servers because right now they do not have the newest Lion version available on those servers.

Can I Make a Leopard Boot disk with my Free Agent Desk 1.5TB External Hard Drive?

Can I Make a Leopard Boot disk with my Free Agent Desk 1.5TB External Hard Drive? Using my Power Mac G5 Dual 2.0Gig original computer?

Only if it is a FireWire interface. The G5's won't boot to a USB 2.0 drive.

Unable to Log and Capture AND make FCP a boot disk

I am unable to go into Log and Capture mode in FCP 4. I can capture from firewire using I movie just fine so I know the sytem works. The minute I open Log and Capture from within FCP (with the JVC Mini-DV camera hooked up thru Firewire), it crashes. Help. I upgraded from FCP 3 to FCP 4 a couple years ago and it hasn't worked right since. Would re-installing the FCP 4 upgrade work? Also, my system works very sluggish. Please explain to me how I would make the veersion of FCP 4 my boot disk. I realize that I can't have the FCP 4 application and the media on the same drive but is there a way to partition one of my drives and make FCP one of the startup disks? Hope this isn't too confusing. Thanks.

First off, FCP 4 was darn unstable. FCP 4.5 is a free upgrade and is STILL the most stable version out there. FCP 5 is getting there.
Secondly, try:
Shane's Stock Tip Mantra: If the program was working fine, and now isn't, or just isn't working the way it should, the first things to do are:
1) Trash your FCP preferences. Download the appropriate version of FCP Rescue at http://fcprescue.andersholck.com/ and run it.
2) Open the Disk Utility and Repair Permissions.
As for partitioning the hard drive, that isn't necessary. Hasn't been since FCP 3.
Shane

Make a USB boot disk to restore OS AND files

I use Time Machine faithfully. I've installed OS 10.6 on a thumb drive for emergencies to restore files etc. when i've errantly thrown them away, and always thought I could somehow use it to restore my system in the event of a really big problem (never had to really test it out for real...until last night!)
I discovered that just having a boot disk isn't enough. I still needed to boot from the original CD, go to "Utilities", then "Restore from Backup". So much for all my planning.
Isn't there a way to include that essential feature on my USB boot disk?

All you need is a external powered USB drive and free Carbon Copy Cloner.
http://www.bombich.com/
You can hold option and boot from the clone, make a backup or reverse clone when you want, total access to the clone from another Mac.
You don't need TimeGizmo or a USB thumb drive or cd's that scratch. Your not a newbie that deletes files by accident.
And if you are there is free software for that here:
http://www.cleverfiles.com/pro.html
(no comp ever)

How you make an ssd boot disk?

I'm considering a 6 core MacPro. I'll want to replace the internal 1 tb drive with an SSD boot drive on an OWC Accelsior PCIe SSD card. It'll be a pretty minimal config. Apps, data files and Time Machine will live on mirrored internal 4 TB Hitach Sata drives.
Is it doable to move the O.S. etc over to SSD and then remove the internal drive to free up the drive slot? If so, what's the best way?
Thanks.

japamac's blog: Make Space for Performance -- Moving the Home Folder
http://chris.pirillo.com/how-to-move-the-home-folder-in-os-x-and-why/

How do I make an OSX boot disk

I recently bought a Mid 2011 Mac Mini off my brother (because the new Late 2012 Mac Mini I bought has a quite a few bugs - see this thread) and would like to do a fresh install of Mountain Lion. Problem is there's no "Install OS X Mountain Lion.app" in the /Applications folder. He did pay for it to upgrade it on the Mac Mini, but when I go to the App Store to download it, it wants me to pay another $20.99 for it. He's now using a new 15" Retina Macbook Pro which already comes with Mountain Lion, so the license for it he bought for this Mac Mini isn't being used anywhere else, so there's no piracy going on.
How can I do a fresh install of OS X and make a backup USB stick so that I have it in case things go wrong again? It's crashing something shocking lately, even though my brother has already reinstalled OS X somehow.
Thanks.

Unlike the old days when possession of the installer DVD gave you right to the system copy, now with downloads the license remains with the purchaser of the software even if the computer is passed on. In other words, you will have to buy your own copy of Mountain Lion since to download it and install it you have to be logged onto an Apple account used to purchase the software.

How to make boot disk for MacBook Pro with Mavericks pre-installed

Hi -
I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0). I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion. In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk. In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed). I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks. Thanks very much for any help anyone can provide.
Shelly

Open App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

How do I prevent the Lion boot partition from being reformatted when using boot camp?

Under Windows 7, Computer Mgt, I shrink the C drive to create another drive. When I right click on the unused drive to format it, 200MB Lion boot is formatted and assigned a drive letter F. But I did not tell Windows 7 Computer Management to do that. I clicked on the unused 170GB space to create it as F, I did not click on the 200MB Lion boot partition at the front of the list.
Now I have to take the computer back to the Apple store to reinstall Lion for me.
I tried this twice and it happened twice. So now I need to go back to the Apple store a second time for help on the same problem.
Would the 200MB Lion boot disk at the front be safe from reformatting if I first made it drive letter F, and then made the new drive letter H at the right side of the drive list in Computer Management? Also, there is an unlettered drive between the Lion drive E and the Windows 7 drive C. Should I make that G prior to formatting drive H?
By the way, I did this on another MacBook pro that was using Snow Leopard, following the same procedure, and had no problems. So could a different version of Boot Camp be the issue?

I just found an older question similar to this one that you also replied to. It was from 2012 and never solved. The only things I am using in my set up is a male quarter inch cable from my guitar to my interface, a USB cable from my interface to my computer, and headphones from my interface to my ears of course. Just like in the other question I found I have everything in the Audio MIDI Setup of the computer set to use the interface as input and output and I also have everything in garage band setup to use the interface as audio input and output. Any new track is recording the metronome and any old track that is being played in the headphones. No external speakers are being used for monitoring and no microphones are being used.

Help needed - boot disk - SATA support?

I've been trying to flash my bios with the latest patch for the 865PE Neo2 FISR
However when i boot from the floppy into dos i don't have access to my hard drive to run the flash program. I'm assuming that this is due to the fact that i'm running 2 SATA HDD's in RAID 0 format. If this is correct are there specific boot disk images that have support for RAID?
Thanks in advance.
Dave

With NTFS file system, you need to make a Win98 boot disk. Go to
http://www.bootdisk.com/
and get a Win98 or WinME OEM boot disk.
Copy your flash program and bios image to a second disk.
Boot from the Win98 floppy. This will create a ram drive c:
Change to that drive by typing
C:
Then put in your bios floppy and copy all the files to the c drive:
copy a:*.*
Then flash

How do I create a new boot disk from an existing one?

I have a G4 Quicksilver with internal PATA disk, running 10.4. I want to upgrade the internal disk from 40 GB to 160 GB. I have installed a second disk and can see it fine, but what I really want is to put the system on the new disk and have it be the one and only boot disk in the system. Is there a straightforward way to do this? Is a carbon copy cloner the way to go? Will that have problems with the different disk sizes? Will it handle bad blocks properly? Isn't there a way to just use drag-and-drop?
Once I have made a copy, how do I make it the boot disk? Do I have to swap it into the PATA "master" position to do this?

Cloning And Backup Tools
A bootable clone is an exact copy of your drive which is capable of booting your computer. Making a copy of your computer which is capable of actually starting the computer requires special copying procedures. Some people just back up data files but if you have problems you have to reinstall all your operating system and all your applications. With a bootable clone you just start up from the backup drive and clone back everything.
To copy files from one hard drive to another hard drive you can use:
[CarbonCopy Cloner|http://www.bombich.com/software/ccc.html] (donationware)
[SuperDuper|http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html] (shareware)
[IBackup|http://www.grapefruit.ch/iBackup/index.html] (free)
The Restore function of Disk Utility included in OS X. [Kappy's directions|http://discussions.apple.com/message.jspa?messageID=8799711#8799711]
[Tri-Backup (commercial)|http://www.tri-edre.com/english/tribackup.html] (payware)
[Silverkeeper|http://www.lacie.com/silverkeeper> (free) - version 2 has some issues (references: [1|http://www.macintouch.com/readerreports/backup/index.html#d12jan2009],
[2|http://www.macintouch.com/readerreports/backup/index.html#d13jan2009]) and it is recommended Tiger users stick with 1.1.4.
[Kappy's Backup Software Recommendations|http://discussions.apple.com/message.jspa?messageID=9065665#906 5665]
[Overview of Mac OS X Backup Programs|http://8help.osu.edu/1247.html]

Raptor as boot disk or storage/scratch?

Could anyone please advise me? The 250 GB Western Digital Caviar hard drive I installed in my first generationn dual 2GB G5 recently and partitioned for static storage and scratch disk for Photoshop definitely runs slowly. I'm thinking of moving it into an enclosure and replacing it with another. Many people recommend the 74MB 10,000rmp Western Digital Raptor. Anyone here got any experience of it please?
Should i make it my boot disk and move the applications and OSX onto it, or should I keep my Seagate Barracuda 160MB original drive as the OS/boot/application disk and use the Raptor for a scratch disk for Photoshop, or use the seagate as the secondary disk? What's the best
way of doing all this?
Also what's the best solution for an enclosure for converting the WD Caviar into an external drive?
Thanks in advance

I didn't know that about CS2 (which is the version I'm running). Thanks for that. I have 3.5 GB RAM, so it runs quite fast anyway, but a few tasks still take a little while.
Thanks for info re the hitachi too. I'll look at that. This has been really helpful. i wanted to flag it as helpful, but the option has gone and I have only a solved button.
Veda - the scratch disk arrangement has far more
utility with Photoshop releases PRIOR to CS2. CS2
utilizes memory far more than the hard drive - thus a
scratch disk does not provide much, if any
improvement, with CS2.
That said, I have used the same 74 GB Raptor in my
Dual 1.8 and now my Quad with no problems - really
like it. I now have about 55GB of applications - so I
may upgrade to the newer model soon. The new Hitachi
500 GB/16MB cache is getting excellent reviews for
performance and massive storage - you may want to
look into that as well.
Cheers

Is there any way to make a snow leopard partition on an early 2011 MacBook Pro that was upgraded to Lion, without the original boot disk?

So I have an early 2011 MacBook pro, I believe it shipped with snow leopard originally, as I purchased and upgraded to Lion fairly early on. I am trying to make a partition right now and have it run snow leopard so I can use programs that have PowerPC.
I should note, I replaced both the RAM and the harddrive in my Macbook pro. I changed from 4 GB of ram (that came shipped) to 8 GB of ram from a 3rd party, that I installed on my own months ago, have registered in the computer and have been working fine for quite some time now.
Also I should note I replaced my harddrive. I went from what ever the standard 500 GB harddrive that shipped with 15 inch early 2011 MB pro's. I now have a 3rd party SSD that's 240GB's that I also installed on my own, (at the same time as the RAM---Black friday items) The harddrive has been working just fine since then.
In installing the harddrive I borrowed a friends external harddrive and used a program called carbon copy cloner to get everything over to the SSD.
Now here is my issue. I have ordered the Snow Leopard (10.6.3) install disks from apple, I have created a partition on my SSD for snow leopard, but when I try to select the install disc for snow leopard at boot I get three beeps.
I know this issue has been posted elsewere but it said answered and the answer is no longer available. I also am unsure if any of the RAM or Harddrive swapping could have been causing the issue. I have the old harddrive and RAM still, but unfortunatley have no external harddrive anymore or money to afford one.
Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks).
Let me know If there is anything I can do. I'm a now broke college student so i'd like to spend as little $$$$ as possible
*PS I should also note the DVD drive is working fine, it reads the disk, the disk is brand new, it plays DVD's fine and has never had any issues in the years i've used it for similar tasks*
sorry for the long drawn out post, I just wanted to include as much as possible from what I've seen other people have issues with

BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

I've downloaded Lion. I have a boot disk. Can I use it to install on another machine?

I downloaded Lion from the Mac App store and it's working 100%. Love it.
After downloading and before installing, I copied the installESD.dmg (I think that's the correct filename) to a DVD (as per all the instructions out there to create a boot disc). I did NOT copy the entire "Install Lion App" to the DVD.
My question is: if a friend buys lion from the app and then cancels the download, can he use my boot disk to install lion as an upgrade? The reason I'm asking is that his Internet connection is rubbish and he can't download it. Presumably if I copy the dmg file to his hard disk I can run it that way?

Actually, you can burn a DVD or USB (8GB) thumb drive and let him boot and install from it. Or, you can actually run the InstallESD.dmg file from his machine. I've done both and Lion installs.
Personally, I would burn a DVD or thumb drive so you always have it.
Burn the InstallESD.dmg to a bootable DVD.
Launch Disk Utility and click the Burn button
Select the InstallESD.dmg file from your desktop as the image to burn. Insert a blank DVD and wait for the the image to be burned.
Burn the InstallESD.dmg to a bootable USB thumb drive.
Open Disk Utility and drag the InstallESD.dmg file to the left side pane. Go to the Partition tab ad select 1 Partition from the drop down menu. Choose Mac OS Extended (Journaled) on the left. Click the Options button under the partition table and choose GUID Partition Table. You will need this to make the drive bootable on a Mac. Hit the Apply button when ready to format the drive (it will erase everything on the drive).
Click on the Restore tab and drag the InstallESD.dmg file to the Source. Drag the USB partition to the Destination. Hit the Restore button and it will create the bootable USB drive with the OS X Lion installer

I do I make a lion boot disk?

Similar Messages

Maybe you are looking for