"I do not get any message or option to add exception" - Using Self signed cert -Images does not load

Wr are have two web servers one for app and another for loading images. Both are behind Kemp Load balancer and are using self signed certs from the load balancer. The images does not load when using Firefox 3.x. I load with IE and Firefox 2.x. With firefox 3.x it does not give a message to "add exception". I only get one certificate message to add exception for the app server. I do not get the certificate message or pop up for the imaging server with Firefox 3.x.
== This happened ==
Every time Firefox opened
== Always ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

You have a lot of information in packed in the "More system details..." (in the right-hand column), where it looks like you found a solution. If not take a look at "Problematic Extensions" the AVG Free installation of their "'''AVG Free Search'''" can cause such problems. Directions to fix that are specific and involve reinstalling AVG Free without the Link Scanner component.
* http://kb.mozillazine.org/Problematic_extensions

Similar Messages

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

My iphone 4 does not register calls made to it. if i make a call from another phone, i can hear it ringing, but it does not register on the iphone. also, i do not get any messages when this happens. then after a day or two it decides to start working.

Clean iPhone charging port with clean dry toothbrush. See if better. If still problem clean charging port again with toothbrush and small amount of Isopropyl Alcohol.

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Scenario is HTTP to db. In HTTP client, when Sender is Business Component, Pi is getting data successfully but when Business system is used as sender Pi is not getting any message in sxi monitor. Please help

Hi Ankita,
Try to trace at ICM level, Go to smicm transaction
Set level to 3.
Later send your request. Finally trace the request in:
When you have seen the log, check if any exception is raised with your request or the request and share it here.
Regards.

I can't change my appleID password as I have no idea what my security questions are! HELP!!!! I am not getting any messages to nmy new, awesome Samsung S4

I can't change my appleID password as I have no idea what my security questions are! HELP!!!! I am not getting any messages to nmy new, awesome Samsung S4

Hello Jaded1234,
The steps in the articles below will guide you in setting up your rescue email address and resetting your security questions:
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
If you continue to have issues, please contact our Account Security Team as outlined in this article:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Best,
Sheila M.

Not getting any messages at console (Developer studio)

hi all,
I am doing a web application project.
Here i created a java bean class for the database connections etc..
I created WAR file and EAR files also. Deploy to J2EE Engine is successful.
I created jsp file as front end to insert the values into the Database. When i'm running the web page i didn't get any messages (System.out.println()) in the console.
How can i start the server in the Developer studio?
Please guide the steps....
Thanks,
Raghu

Hi,
As far as i know when u deploy your ear in the J2EE engine it will be available.. You dont have to start any server.
IF u have a JNDI name you can direct lookup the bean.
And about system.out.println we cant see the ouput in webpage ! Try response.getWriter().println()......
Elobarate on ur scenario .. and it will be easier to help !
Regards
Suraj

Does using self-signed cert. on ISE server has anthing to do with url redirect being not working

Hi,
I am setting up wired ISE environment. Everything is going fine, except url redirect is not working.
I just wondering, if using self-signed certificate on ISE server has anothing to do with the problem ?.
Appreciate your input.
Thanks

Hi,
As long as you have not changed the hostname or the domain name (and dns is accurate). You should only receive the certificate warning but still get redirected without any issues.
Thanks,
Tarik Admani
*Please rate helpful posts*

Workflow initiated by RFC module , not getting any message in inbox

hi all
I am trying to trigger a workflow by a RFC function module
My questions are ::
1. will there be a message which will be automatically sent to my inbox ?
2 if not then what i have to do to send a message to the inbox of any one whose initiating that workflow through function module
it a bit urgent
thanks in advance
naval bhatt

Hi,
if you want a work item to appear in a users inbox (message) then you will have to create a step in the workflow you trigger that does this.
I guess the develoment steps are as follows.
1) Create an rfc enabled fm in se37. In this fm you need to publish the event that you use to start your WF. This can be done by using fm SWE_EVENT_CREATE . You will need the object type, the key and the event name.
2) Configure a workflow with the steps you want to execute and subscribe it to the event your using. (SWE2 or the event linkage in the workflow template tc pftc).
These are the basic steps you will have to execute.
Cheers,
Kevin.

Could not get artwork for some albums. I am not getting any artwork for Cd's imported into Itunes. almost 400 albums and not one album artwork. what to do?

cannot get artwork for some albums is the feedback I am trying to get when trying to get album artwork for Cd's imported into my itunes. almost 400 Cd's computer is seen processing the infor however not one album artworkcan be seen what to do?

Hello, Welcome to Apple Discussions.
Are your songs from Audio CDs or iTunes Store? If not you may need to manually find the album artwork for them as these songs may not be listed in the iTunes Store database for your region.
iTunes: Album art may not download properly
http://support.apple.com/kb/TS1815
iTunes will only download album artwork for songs that it can find in the iTunes Store. iTunes will check each song in your iTunes library and attempt to match it up with a song in the iTunes Store. If the data matches, iTunes will download the album artwork from the iTunes Store and add it to the song in your iTunes library. If iTunes does not find a particular song's artwork in the iTunes Store, you will not see an alert message. iTunes simply does not download artwork for that song.

In iGoogle with firefox 4 I am unable to get the tabs to change down the left hand side or get any response to selections made to items like calender or weather this does not happen in Explorer 9.

After loading FireFox 4 all worked OK for a while. Now when trying to change the tabs on left hand side (Home etc) or change selections on the apps (Weather or Calender) nothing happens. I am running iGoogle with FireFox 4 but this does not happen when trying the same thing with Explorer 9.

Having the same problem, but not only can't change tabs, but cannot open links on the page. I thought that by reducing my iGoogle page to one tab, and putting what content I could into app tabs that would solve most of the problems. It did some. For a while I was able to bypass this with the iGoogle Tab Remover add-on but it stopped working last night and I've not been able to get it working since.

TS4425 I tried this on my iPad. The but did not get any terms and conditions. Photo stream works fine on the iPad but not on Apple TV. What do I do?

Followed the instructions but they don't work. On the iPad I got no new T&Cs and it works fine. So I have no means to agree the new T&Cs and because of that it does not work on Apple TV.

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

Mail app is blank. I can not see any thing but a blank page with blue lined format. It does not shut down either. It just blinks out after a few seconds and the icon is there alone on my home screen then everything goes black and my home screen comes

MY Mail app does not respond in anyway to anything. The icon shows I have over 300 emails but I have no access to them. When I tap on the Mail icon a blank white page comes up with the blue format lines. No emails, no inbox, nothing, not a single letter of the alphabet is there. Within a few seconds it blinks out and I see the icon and my home screen. Soon it just blinks out to black. I am left with the icon at the bottom center of the screen. I have no way to shut it down. I have no access to the emails (300) in my inbox. All that is happening is my memory is getting filled up with emails. I would appreciate any solution to this problem barring deleting my email set up in settings.
if I have to resort to that I will, in the meantime I am hoping for a different resolution. Thanks everyone, you are all amazing and greatly appreciated. Sincerely, Diane.

Hey There Diane,
If I'm understanding your situation, you've got an iPad running iOS 6.1.3 and the Mail app is not working. I understand you don't want to remove and re-add your email account.
The first thing I would suggest is to make sure your iPad is backed up to iCloud or iTunes.
Do you have an iMAP or a POP email account? When you go online to your email service provider's website, are you able to access the 300 emails in your inbox?
Since the Mail app is part of your iOS operating system, upgrading that software to the latest version, which is 8.1.3 may resolve this issue.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
http://support.apple.com/en-us/HT201398
Try these steps if you have an unresponsive app on your iPhone, iPad, or iPod touch.
Restart the app
Close the app and open it again.Restart your device
Turn your device off and back on.Check for iOS and app updates
Make sure that you're using latest version of iOS.
Open the App Store and tap Updates.
If updates are available, tap Update All.
If asked, enter your Apple ID password.
You might need a Wi-Fi connection to update some apps.
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update the iOS software on your iPhone, iPad, and iPod touch
Learn how to update your iOS device wirelessly or using iTunes.
iOS software updates introduce new features that let you do even more with your iPhone, iPad, or iPod touch. Be sure to keep your devices up to date so that you don't miss out on the latest features.Before you update
Back up your device to iCloud or iTunes.
If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.Update your device wirelessly
The easiest way to update your device is wirelessly, also called “over the air.” Here’s how:
Plug in your device to a power source.
Tap Settings > General > Software Update.
Tap Download and Install. Updates might download automatically while your device is connected to Wi-Fi and a power source.
Tap Install, or tap Later to install the update later. If you use a passcode, you'll need to enter it before installing the update.
If you have some free space, but not enough to update over the air, you can either update using iTunes or delete content manually from your device. Whether you use iTunes or update over the air, you'll have the same amount of free space on your device after you update.
Some iOS software updates aren't available as over-the-air updates. VPN or proxy connections might prevent your device from contacting the iOS update servers.Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Hope this helps ...
- Judy

Since ipad air does not support adobe flash player what is good to use?, Since ipad air does not support adobe flash player what is good to use?

Since Ipad does not support Adobe flash player what is the best one to use?

Adobe has not made a version of Flash for the iPad.
Kappy explains why. https://discussions.apple.com/message/19446567#19446567
5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
Top 4 browsers supports flash player on iPad and iPhone
http://mashtips.com/flash-player-ios/
 Cheers, Tom

JDBC sender adapter can not get any message

HI~
I have a problem with my JDBC Sender which reads data from a SQL Server. Previously it was working fine but It is not Picking the records from the JDBC table.
I have checked in RWB communication Channel monitoring there no any error or success messages but channel is showing healthy status only(Green).
User's authorization and SQL statement is all right. I checked the SQL in the DB and there are some messages that should be processed.
I also inactive and active the Comunication Channel.
I also checked the LOCKING ADAPTER in Visual Administration is nothing.
BUT the same configuration in DEV system are work perfectly.
I don't want to restart XI,because is PRD system.

Hi,
1 ) What is exact audit log message ?
2) Try fetching the count in SQL statement if there are any valid records it will give the count.
May for testing you can use <TEST> in update statement.
3) Have you used taskTimeout parameter ?
4) Are multiple channels polling on same table ?
regards
Ganga

Time Capsule not backing up - but not getting any messages of failure

Hello, I have had my Time Capsule installed successfully for about 5 months. Two weeks ago, it apparently stopped backing up. I was regularly seeing the hard drive icon appear on my desktop and the spinning icon in the top right hand menu bar, so I was assuming all was well. But recently something else cause me to open time machine to look for a file to restore and I found that Time Capsule hadn't backed anything up recently!
I received no messages, got no failure notices - nothing!
Now, when the icon appears, I have checked on the status and right now it says "Indexing backup." I don't know what stage it stops, because the icon just quietly disappears.
What should I do?

A clue may be lurking in your logs. See #A1 in [Time Machine - troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for a handy widget that will display the backup messages from your logs.
If that shows errors, see #C2 there.
If it doesn't, but shows very small amounts of data copied, see #D5 there.

Every time I try to download the new Firefox I get this message when it relaunches, " Invalid Request You requested a page that does not exist. You may have reached this page by clicking on an invalid link or bookmark." What should I do?

This happens with every browser I try to download that isn't the old 3.0 version of Firefox

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now" "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
If this doesn't help, try ending any Firefox processes and completely restart it. If none of this helps you might consider you could have Malware or something nastier. Connection issues can also cause that error message. I remember having the same issue a couple of years ago and had to completely restart my PC for some reason to get the new Firefox to install. Sorry I don't have any more in depth answer.
Hope this helped you, have a nice day.

"I do not get any message or option to add exception" - Using Self signed cert -Images does not load

Similar Messages

Maybe you are looking for