I do not get the signal that is advertised or stated by your coverage maps, or sales people. I am getting sick and tired of the Verizon run-around. My next step is to submit a formal complaint to the FCC and my state Better Business Bureau. I will also
Verizon service is rapidly declining. In addition, the provided service is not as advertised. This is fraud by any standard.
They have what is called heat maps which give a reasonable indication of QOS quality of service. I am also beset by reception problems. well I have bad news for you any type of wireless service is predicated of "best effort" meaning they try best to deliver service to as many paid subscribers in service area. They figure their statistics based of how many service workers great ok and lastly outliers like me and you. You raise a case to state regulator or local that you feel your community has been targeted by bias in heat maps & why it should be fixed. It might work or might not. A better effort is to take your case to FCC. If you can prove there is favoritism in delivery of service to your community then they will deal with verizon but the FCC isn't going to pay much attention if your a crank and keep pestering them . My angle has been to keep plugging away at it explain business reasons of why they need to extend service but being respectful to Verizon. Keeping pressure on them maybe even helping them if local community is biased against adding cell tower or other Red tape . Give them benefit of doubt too they may be hampered by community or local state justification that just wont grant any service improvements.
Similar Messages
-
I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan
You didn't buy an 'unlocked' iPhone 3GS - you bought a 'hacked' one.
Updating to iOS 5 removed the hack and the unofficial unlock.
All you can do is try to find out which network the phone is locked to and ask them if they can unlock it properly.
Otherwise, sell it or throw it away and buy an officially unlocked phone from an official source. -
i connected my iphone 3g to itunes which was in 4.1 firmware and itunes ask for an update which i downloaded an updated the phone to version 6.1.3 but my phone cannot start it shows no service my sim card is not getting network and i cannot use the phone. what should i do.?
First, you do not have a 3G if you could upgrade it to 6.1.3, because 4.2.1 is the last version that will work on the 3G. So you either have a 3GS or you somehow hacked the phone to install an incompatible version. You can check the model you have by entering your serial number here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Assuming you have a 3GS the most likely reason for your problem is you have a gray market phone that was hacked or jailbroken to unlock it. When you upgraded it you removed the hack, so the phone is now locked to its original carrier. -
Hi
My i-pod touch is not getting sync and the error message is coming as "i-tunes couldn't connect to i-tunes store. An unknown error occurred (-3212).
I have updated the latest OS 6.0 in my i-pod touch.
Kindly send the solution
Regards
Deepak
<Email Edited By Host>Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
Also, you are not addressing Apple here. We are all just users like yourself. -
I have had Firefox for years and in the last 2 weeks, I am getting all of these stupid Pop ups about credit reports and some Epic Play thing. How can I make sure I do not get them and why all of a sudden?
Identify and remove adware/malware
http://www.thesafemac.com/arg/ -
I have been hearing about the "heartbleed vulnerability" and told to change all my passwords. Does this apply to Macs? I thought they could not get viruses and this was one of the reasons I got one.
See What is Heartbleed?
(Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.) -
I have been with Verizon for 15 years. I have a family share plan with 2 smart phones a standard phone and a jetpack for wireless access. I pay for insurance on the 2 smartphones. Approximately a year ago I made a payment arrangement to continue service on my account even though I had some business difficulties. I was told that while the arrangement was in place I could not make any changes to my account. However, since then I have had the following issues and when I try and contact Verizon to try and resolve them I am place on eternal hold or disconnected.
Issue #1: My daughter lost her phone in June 2014. (The contract on this phone was up in 2013) I have been told that I cannot replace the phone even though I pay the insurance premium of $9.95 a month. I have been billed for it and have also been charged $54.87 for the monthly service as well. The phone has not made or received a call since June 4, 2014 yet I have been charged $274.38 I just was able to have the service suspended at the store today, 11/29/2014
Issue #2 My phone has intermittent flaws, locking up and reuring rests, dropping calls, failing to receive calls etc along with horrible battery life. I went into the local verizon store and they ordered me a refurbished replacement phone which was subsequently sent to me. When I received it I took it to the store to have them assist me in setting it up properly. I was told that I should NOT set it up but send it back due to some physical damage present on my old phone that would most likely result in a $150 charge...it was recommended that I just upgrade my phones as they were all out of contract and that would be the best solution. I asked the manager if that would be possible due to the "terms" on my account and she said "it would not be a problem". I was interested in an Iphone 6 which was not in stock so I sent the replacement phone back and left, to wait for the phone to become available.
Issue #3 I had a JetPack that was recently stolen from my car. I stopped in to ask what to do about it (it is no longer under contract either) They suspended the service and recomended I wait until I upgraded my other phones and then get a new Jet Pack. I just received noticed that they were going to continue billing me for it this week, even though it has been out of contract for several months??????
I recently went to Best Buy to take advantage of their Black Friday deals and was told that based on the status of my account I was ineligible for any upgrades. We called Verizon from the Best Buy and they told me that I needed to address my account status (I just made the scheduled payment on the 23rd of Nov) either with Financial Services or go to a Corporate Store. I went to the store and was told there was nothing that could be done at that level, I would need to talk to financial services (which was closed)
So, I am extremely frustrated and upset with this whole situation and wanted to make one more attempt to resolve it with Verizon before I make a full blown complaint to the Attorney Generals Office, the Better Business Bureau as well as post this incredibly BAD customer service story on social media. I hope that I hear from someone ASAP as this is critical that I get things resolved immediately. I can be reached at [removed].
Personal information removed as required by Verizon Wireless Terms of Service
Message was edited by: Admin ModeratorComplain to the Attorney General about what? There is nothing in your story worth any such complaint. They will tell you the same.
First you have payment difficulty so credit and the Edge program are not available to you. You have to be credit worthy to get any upgrade, unless you can pay full price for all those new devices.
Can you?
You are trying to get new contract plans, but since you are having paying on time and in full issues you will not get extended credit from any carrier.
What I would do is go and port out to Boost or Virgin Mobile where you pay a reduced cost for each device and get unlimited everything for $40 to $50 a month, it is pre pay so if you don't pay you get cut off.
Verizon although with the best coverage is also the highest priced.
Good Luck -
Could not find the main class: oracle.ide.boot.Launcher. Program will exit
Hi,
I have installed Oracle11g_win64_11gR1, Database and Client.
The issue is unable to invoke "sqldeveloper", getting the following error message. Could you please help ?
FYI. I have already downloaded and installed installed JRE and JDK.
ie. C:\Program Files (x86)\Java\jre6\ and C:\Program Files\Java\jdk1.6.0_24, still did not work.
C:\Users\oracle>java -version
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b07)
Java HotSpot(TM) 64-Bit Server VM (build 19.1-b02, mixed mode)
Let me know, if you need more information. Here is the error message.
Error Message
=========
(1) if I invoke sqldeveloper, directly from the location " C:\app\oracle\product\11.1.0\db_1\sqldeveloper\sqldeveloper\bin " using explorer, I do get error message
"Unable to find a java Virtual Machine.
To point to a location of java Virtual machine please refer to the Oracle9i JDeveloper Install Guide ( jdev/install.html)"
(2) if I invoke sqldeveloper, directly from the locationC:\app\oracle\product\11.1.0\client_1\sqldeveloper, it prompts me to enter "full path for java.exe".
When I enter full path and continue, still it continue to prompt and ask the same input.
(3) if I invoke sqldeveloper from from command prompt using the batch file "sqldeveloper.bat"
C:\Users\oracle>C:\app\oracle\product\11.1.0\client_1\sqldeveloper\sqldeveloper\
bin\sqldeveloper.bat
C:\Users\oracle>java -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10
-XX:JavaPriority9_To_OSPriority=9 -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_F
LAG=true -Dsun.java2d.ddoffscreen=false -Dwindows.shell.font.languages= -Dide.co
nf="sqldeveloper.conf" -Dide.home.dir.name=.sqldeveloper -classpath ..\..\ide\l
ib\ide-boot.jar;..\..\jdev\lib\xmleditor.jar;..\..\ide\lib\oicons.jar;..\..\..\j
dbc\lib\ojdbc5.jar;..\..\jlib\jewt4.jar;..\..\jlib\share.jar;..\..\sqldeveloper\
lib\jle2.jar oracle.ide.boot.Launcher
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ide/boot/Launc
her
Caused by: java.lang.ClassNotFoundException: oracle.ide.boot.Launcher
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
Could not find the main class: oracle.ide.boot.Launcher. Program will exit.
OS
==============
MS Windows 7 Home Premium
sqldeveloper.conf
===================
SetSkipJ2SDKCheck true
IncludeConfFile ../../jdev/bin/ide.conf
AddVMOption -Dapple.laf.useScreenMenuBar=true
AddVMOption -Dcom.apple.mrj.application.apple.menu.about.name="SQL_Developer"
AddVMOption -Dcom.apple.mrj.application.growbox.intrudes=false
AddVMOption -Dcom.apple.macos.smallTabs=true
AddVMOption -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true
AddJavaLibFile ../../jdev/lib/xmleditor.jar
AddJavaLibFile ../../ide/lib/oicons.jar
AddJavaLibFile ../../jlib/jewt4.jar
AddJavaLibFile ../../jlib/share.jar
AddJavaLibFile ../ide/jlib/xmlef.jar
AddJavaLibFile ../../sqldeveloper/lib/jle2.jar
AddJavaLibFile ../../sqldeveloper/lib/oracle.dbtools.logging.jar
AddVMOption -Dsun.java2d.ddoffscreen=false
AddVMOption -Dwindows.shell.font.languages=
IncludeConfFile sqldeveloper-nondebug.conf
SetJavaHome C:\Program Files\Java\jdk1.6.0_24
Edited by: sivapara on Feb 16, 2011 1:08 PMI was able to resolve this issue by performing following.
1. Go to the location where sqldeveloperW.exe is being executed from.
2. You will find a file sqldeveloper.conf in that location. Edit this file and change the value of IncludeConfFile to point to actual place. For me following were old and new values.
OLD (Wrong) : IncludeConfFile ../../jdev/bin/ide.conf
NEW (Correct) : IncludeConfFile ../../ide/bin/ide.conf
After making above change in the sqldeveloper.conf file. Save and close it. Restart SQLDeveloper. You will not get the error anymore.
Thanks
Ravi -
I know there are a few other questions like this but I can't seem to find how it's relating to my issue. I am getting the familar failure sending mail: the specified string is not in the form required for an e-mail address.mail will not be resent.
in the reports feature of sccm.
I just picked a sample report Compliance 4. I right clicked hit create subscription and input my email into the TO: field. When it runs i get the above error. I checked the email notifcation under configure site components and was able
to successfully send a test message from there but I dont get why it doesnt work on the subscription.
Any Ideas?The log is pretty big so im not sure where I can upload it. I think it would be too big to paste here but I have copied what I think you are looking for in the log and will paste it here. Let me know some place I can send you the full log file
or if you want a different log.
schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Handling Event TimedSubscription with data 2946db38-5a07-4fb1-ad06-d7714e25b1ba.
library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f executed at 12/07/2014 00:02:03.
schedule!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Creating Time based subscription notification for subscription: 2946db38-5a07-4fb1-ad06-d7714e25b1ba
library!WindowsService_37!a04!12/07/2014-00:02:03:: i INFO: Schedule 534ad96b-a680-4630-a865-9f99e1087e3f execution completed at 12/07/2014 00:02:03.
library!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Handling subscription 2946db38-5a07-4fb1-ad06-d7714e25b1ba to report Compliance 4 - Updates by vendor month year, owner: LEGISLATURE\mrykhoe, delivery extension: Report Server Email.
emailextension!WindowsService_37!a04!12/07/2014-00:02:06:: e ERROR: Error sending email. Exception: System.FormatException: The specified string is not in the form required for an e-mail address.
at System.Net.Mime.MailBnfHelper.ReadMailAddress(String data, Int32& offset, String& displayName)
at System.Net.Mail.MailAddress.ParseValue(String address)
at System.Net.Mail.MailAddress..ctor(String address, String displayName, Encoding displayNameEncoding)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.CreateMessage(Notification notification)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
notification!WindowsService_37!a04!12/07/2014-00:02:06:: i INFO: Notification f06f40a4-32f3-4fa6-8077-89083cc7a2a2 completed. Success: True, Status: Failure sending mail: The specified string is not in the form required for an e-mail address.Mail will
not be resent., DeliveryExtension: Report Server Email, Report: Compliance 4 - Updates by vendor month year, Attempt 0 -
Why I can not restore the OS X Lion Montain from my MacBook Pro, will not let me online
Why I can not restore the OS X Lion Montain from my MacBook Pro, will not let me online
What is the Error?
If using Internet Recovery, do you have your WiFi set up as suggested?
Did you try using Ethernet cable? -
I'm getting sick and tired of having to go on my laptop EVERY day to check when OS X LION is coming out. So just for me tell me when the release date is?!
8:30 eastern time is the magic time, according to several sources. Peter Oppenheimer, CFO of Apple, yesterday confirmed the launching date to be today.
-
I am trying to down load my new ipad and used general settings and download as directed, but did not get contacts and pictures from iphone. What do I need to do?
I do not know how you "down load my new ipad ". You purchase an iPad. Maybe this will help:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device -
HR iViews are not getting displayed and showing "Page can not be found".
Hello,
I am facing an issue in the EP 7 wherein all the standard HR iViews are not getting displayed and showing "Page can not be found".
We have added S_SERVICE autorisation object to user used for the relative JCO as well by looking at other similar forums but that did not help.
I have attached last part of log from file application.log under "F:\usr\sap\EP1\JC01\j2ee\cluster\server0\log"
#0002A537D2A6006A0000027300001C4C00046E3590936E5F#1247076244733#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12374##n/a##b7291b106be911de8d8a0002a537d2a6#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A6007A0000001200001C4C00046E35AAA74D33#1247076682222#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A6005F0000026C00001C4C00046E35C2814813#1247077082383#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#SKhatkale#12460##n/a##a7cb51e06beb11de8bd70002a537d2a6#SAPEngine_Application_Thread[impl:3]_6##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A60075000002BD00001C4C00046E35C3AD4359#1247077102039#/Applications/Xss#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SKhatkale#12464##rrisep1p01_EP1_14481150#SKhatkale#b6d348006beb11deb9780002a537d2a6#SAPEngine_Application_Thread[impl:3]_31##0#0#Fatal#1#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#Plain###You do not have the authorization to start service sap.com/pcui_gp~xssutils/XssMenu.#
#1.5 #0002A537D2A6007A0000001300001C4C00046E35DDE07029#1247077541575#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A600650000024600001C4C00046E36B6DBE4D0#1247081181950#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12873##n/a##37e186606bf511de8bf20002a537d2a6#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
Please let me know if anybody has come across such scenario before.
Thanks
Suhas
Edited by: Suhas Khatkale on Jul 8, 2009 10:09 PMHi,
This issue is now resolved. We followed up with SAP and they suggested to update the component EP-PSERV to latest patch which was earlier to patch 1. Later on we upgraded it to patch 4 and this resolved the issue.
Thanks
Suhas -
Demantra 7.3 ,Analytical Engine Is not getting up and getting terminated
Hi,
When i am trying to make my Demantra 7.3 - analytical engine up on linux server, is not getting up and getting terminated. Can any body help me in the same.
For your information
Mine Weblogic server is 32 bit and linux operating system is 64 Bit.
Thanks in advance.
Thanks,
Ankur Dawra
Edited by: Ankur Dawra on Aug 16, 2010 2:52 PMIf that specific patch is causing a conflict with CU7 or Rules Engine Update Service, the best option would be to LOG a case with Microsoft and let them either fix it or provide a justification of why that specific Windows Patch is not a good idea (file
an exemption in case of later with the customer/security team).
Regards. -
Packets not getting encrypt and decrypt IPSEC
Hi Everyone,
I have 2691 Router conencted to Internet and it is doing Nat.
This connects to 3550A Switch which has connection to 1811W Router.
I setup VPN between 1811W and 3550A.
3550A has connection to 2691 via ospf.
OSPF is running between 1811w and 3550A.
1811
1811w# sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst src state conn-id status
192.168.99.2 192.168.99.1 QM_IDLE 2005 ACTIVE
IPv6 Crypto ISAKMP SA
1811w# sh crypto ipsec sa
interface: FastEthernet0
Crypto map tag: VPN_MAP, local addr 192.168.99.1
protected vrf: (none)
local ident (addr/mask/prot/port): (192.168.0.0/255.255.0.0/0/0)
remote ident (addr/mask/prot/port): (192.168.99.0/255.255.255.0/0/0)
current_peer 192.168.99.2 port 500
PERMIT, flags={origin_is_acl,}
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 30, #recv errors 0
local crypto endpt.: 192.168.99.1, remote crypto endpt.: 192.168.99.2
path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0
current outbound spi: 0x0(0)
PFS (Y/N): N, DH group: none
inbound esp sas:
inbound ah sas:
inbound pcp sas:
outbound esp sas:
outbound ah sas:
outbound pcp sas:
3550A
3550SMIA# sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst src state conn-id slot status
192.168.99.2 192.168.99.1 QM_IDLE 1001 ACTIVE
IPv6 Crypto ISAKMP SA
3550SMIA#sh cry
3550SMIA#sh crypto ipsec sa
interface: FastEthernet0/8
Crypto map tag: VPN_MAP, local addr 192.168.99.2
protected vrf: (none)
local ident (addr/mask/prot/port): (192.168.0.0/255.255.0.0/0/0)
remote ident (addr/mask/prot/port): (192.168.99.0/255.255.255.0/0/0)
current_peer 192.168.99.1 port 500
PERMIT, flags={origin_is_acl,}
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 15, #recv errors 0
local crypto endpt.: 192.168.99.2, remote crypto endpt.: 192.168.99.1
path mtu 1500, ip mtu 1500
current outbound spi: 0x0(0)
inbound esp sas:
inbound ah sas:
inbound pcp sas:
outbound esp sas:
As seen above the packets are not encrypted between 1811w and 3550A.
I have used same ACL on both 1811W and 3550A
ip access-list extended INTERESTING_TRAFFIC
permit ip 192.168.0.0 0.0.255.255 192.168.99.0 0.0.0.255 log
Any reasons why packets are not getting encrypt and decrypt?
Thanks
MAheshHi Eugene,
I did that here is info now
sh crypto ipsec sa
interface: FastEthernet0
Crypto map tag: VPN_MAP, local addr 192.168.99.1
protected vrf: (none)
local ident (addr/mask/prot/port): (192.168.0.0/255.255.0.0/0/0)
remote ident (addr/mask/prot/port): (192.168.99.0/255.255.255.0/0/0)
current_peer 192.168.99.2 port 500
PERMIT, flags={origin_is_acl,}
#pkts encaps: 43, #pkts encrypt: 43, #pkts digest: 43
#pkts decaps: 43, #pkts decrypt: 43, #pkts verify: 43
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 1, #recv errors 0
local crypto endpt.: 192.168.99.1, remote crypto endpt.: 192.168.99.2
path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0
current outbound spi: 0x8319FE5B(2199518811)
PFS (Y/N): N, DH group: none
inbound esp sas:
spi: 0xAE0A578B(2919913355)
transform: esp-des esp-sha-hmac ,
in use settings ={Tunnel, }
conn id: 15, flow_id: Onboard VPN:15, sibling_flags 80000046, crypto map: VPN_MAP
sa timing: remaining key lifetime (k/sec): (4454255/2388)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0x8319FE5B(2199518811)
transform: esp-des esp-sha-hmac ,
in use settings ={Tunnel, }
conn id: 16, flow_id: Onboard VPN:16, sibling_flags 80000046, crypto map: VPN_MAP
sa timing: remaining key lifetime (k/sec): (4454255/2388)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
outbound ah sas:
outbound pcp sas:
Seems it is encrypted now.
Congig of ACL
ip access-list extended INTERESTING_TRAFFIC
permit ip 192.168.0.0 0.0.255.255 192.168.99.0 0.0.0.255 log
even though i have log command config in thr ACL still it shows only
2 logs
.Dec 15 14:23:55.723 MST: %SEC-6-IPACCESSLOGP: list INTERESTING_TRAFFIC permitted udp 192.168.99.1(123) -> 192.168.99.2(123), 1 packet
.Dec 15 14:29:28.391 MST: %SYS-5-CONFIG_I: Configured from console by mintoo on vty0 (192.168.98.6)
.Dec 15 14:40:55.749 MST: %SEC-6-IPACCESSLOGP: list INTERESTING_TRAFFIC permitted udp 192.168.99.1(123) -> 192.168.99.2(123), 1 packet
1811w#
Do you know why is this?
Thanks
MAhesh
Maybe you are looking for
-
Illustrator CS6 Path not aligned to stoke or fill.
Hello! I've been having a problem in illustrator for the last couple of days that I haven't had before. It doesn't just happen with this graphic, it has happened with other objects, even happened with a circle yesterday. It doesn't happen to all obje
-
I am running aperture 2.1.4 and am considering purchasing the latest version. will my photos, projects, and folders etc. transfer over automatically ?
-
Persistently scrolling video for video out
Maybe someone can help me here I just got a mac mini and want to use it for video I hoooked it up to an old RCA tube, using S video and the video adapter. I accidentally hit the frame rate to PAL while setting it up and it started scrolling & became
-
Error in importing flex asset by xmlpost utility
Hi All, I am trying to import flex attribute from one system to another.After execution following command i got error "java.lang.NoClassDefFoundError: com/fatwire/wem/sso/SSOException". Pls suggest me, to remove this error. java -Xmx1024m -Dfile.enco
-
Hi Im using webdynpro to create a help application/iview. The help should be page sensitive for example, if i have iview1 and the help iview on a page, the user chooses to navigate to page 2 of iview1 using those navigation buttons of an iview, then